|
|
For high columns in kitchen pantries as well as residential furniture, Schock offers a solution for load ratings of up to 120 kg. It is based on a ball bearing slide system which is mounted at the bottom of the cabinet below the extensible module.
Lateral stabilization is achieved by another full extension slide which is horizontally mounted on top of the module. In face of its high load capacity, the system provides a smooth movement without swaying.
An automatic self-closing device with integrated damper enables soft closing, even when fully laden. The opening force as well as the closing and damping action will be adjusted individually on demand. |
|
FULLTEST4058 model was designed from HT ITALIA to performing essential tests in industrial environments on electrical machines devices and partially type-tested assemblies (PTTA) in compliance with EN60204-1 and EN60439-1 respectively.
The meter principally performing Continuity test on potential equalising conductors with >10AAC test current, Insulation Resistance with 500VDC test voltage and Withstanding tests with 1000AC test voltage (for electrical machine devices) and 2500V test voltage (for individual test on PTTA assemblies switchboards).
Withstanding test is performed also in BURN mode with no limits on trip-out current. Discharging Time measures of internal capacitance and on external plugs of device under test complete the list of possible test with this meter.As FULLTEST4050 more advanced model also FULLTEST4058 have a built-in internal memory to save all measurement results and a RS-232 PCs interface for directly transfer of saved tests by dedicated Windows software.
The model is fitted inside a practical and protected plastic case board with no flammability and a membrane keyboard for rapid selection of functions is included on the frontal panel together a wide custom display.
FULLTEST4058 is the ideal solution for any kind of verifier and/or industrial installer to performing easily and rapid test on industrial appliances. |
|
CitectFacilities integrates all your facilities systems, including HVAC, lighting, fire, CCTV and access control, across your entire enterprise to deliver a single facilities monitoring and control solution. The software can connect to hardware devices supplied from multiple vendors, in single or multiple sites.
What does this mean for you?
A single, central view of all facilities systems is essential for property owners and facilities managers:
PROPERTY OWNERS
CitectFacilities provides strategic information that lets property owners reduce facility operating costs and improve tenant service. Existing and future facilities equipment investments are protected and the high scalability provides a low risk, low entry cost option that lets you expand your facilities application according to your business plan.
FACILITY MANAGERS
Facility Managers gain real-time visibility of all facilities systems, including central alarm management, with CitectFacilities. This raises staff productivity and improves responsiveness to tenants. Open protocols and open architecture gives you the flexibility to integrate building automation technology suited to your facility. |
|
LEROY-SOMER offers a huge range of centrifugal electropumps designed
for housing: drainage pumps, surface pumps with automatic
priming, submersible pumps. |
|
Housings, ball studs and Co. are as various in their geometry, appearance and construction as the ideas of the designers.
There are standard parts in every possible size, construction and material composition available for most applications. As one of the leading German specialist for linking elements, mbo Osswald always keeps a large number of ball studs and housings out of his product palette of more than 12,000 parts in stock. |
|
aluminum framing for factory automation
We can offer the best China-made aluminmum extrusion profile and accessories of MODULAR ASSEMBLY SYSTEM, including 20mm, 30mm, 40mm,45mm,50mm,60mm profile and connection elements, fasteners(t-nuts, t-bolts, subsequent nuts etc.), leveling feet, hinges.
We have ten years experience in this field and got a well reputation in Chinese market. Since the year 2008, we begin to step into International market. International quality, Chinese prices, believe that we can bring to you more suprise. |
|
19" Ventilation drawer (1U.) with 3 fans and luminous switch
Colour RAL 7035 grey
95298535
19" Ventilation drawer 3 fans with luminous switch and thermostat (2U)
Colour RAL 7035 grey
95298536
19" ventilation unit 6 fans with luminous switch (1U)
Colour RAL 7035 grey
95298545 |
|
| ... products without technical information |
| |
| The Shad-o-Box HS x-ray camera is a stand-alone, high-resolution radiation imaging device complete with 12-bit digital interface. The large 49.2 mm by 49.2 mm sensing area consists of a 512 by 512 pixel photodiode array sensor with 96 µm pixel spacing. An integral phosphor screen shields the sensor from ambient light and converts incident x-rays or energetic particles to visible light that is sensed by the silicon photodiodes. The camera is configured for real-time (up to 20 fps) operation and features low noise and excellent image uniformity, making it an ideal choice for use in a wide range of medical, industrial and scientific imaging applications. |
|
Shad-o-Box™ X-Ray Cameras
The Shad-o-Box x-ray camera is a stand-alone, high-resolution radiation imaging device complete with 12-bit digital interface. The large active area consists of one or more 512 by 1024 pixel photodiode array sensors with 48 µm pixel spacing. An integral phosphor screen shields the sensor from ambient light and converts incident x-rays or energetic particles to visible light that is sensed by the silicon photodiodes. The Shad-o-Box can be used in a wide range of applications including medical diagnostics, industrial inspection (NDT) and scientific imaging.
|
|
Fast positioning with high resolution.
Pollux is a very compact motion control system
preferential used in high precision positioning
applications.
The very smooth running characteristic is one of the
outstanding feature of this system.
Test it´s optimized cost/performance ratio.
Features:
· positioning resolution up to 600.000 Steps/rev.
· use of physical units (mm/s; mm/s²)
· smallest calculated step size = 1nm
· dynamic speed and acceleration range
- 0.1µm to 40mm/s with spindle pitch=1mm
- 1mm/² to 20m/s²
· holding torque up to 10Nm (with gear)
· positioning commands with abs. or relative coordinates
- or velocity and direction
· programmable move to the limits
· 1Vpp high res. Closed Loop Interface
· optimized motor power consumption
· daisy chain capability, up to 16 devices
· RS-232 interface
· CAN-Bus interface
· ASCII command language (Venus-2)
· Box version available:Controller and motor separately
· rugged connector version available (Pollux industrial)
· plug and play capability |
|
The patented “BOX” series is made with aluminium housing from size 25 up to 90.
The housing has been designed with parametric CAD SW supported by programs of analysis of the thermal dissipation capacity and the structural resistance/deformation under the effect of working loads.
The wormshaft is made in case hardened steel and ground machined, while the worm wheel is in shell cast bronze. Before being assembled, the worm wheel is submitted to a running-in working period to improve the surface finishing and hardness.
From type 63 and up, 2 taper roller bearings are mounted on the wormshaft.
The combination of this characteristic and 2 nilos permits the mounting of the whole BOX range, from the size 25 to the size 110, in the positions V5 and V6 without any need of additional interventions
The gear unit is equipped with a full set of filler, level and breather plugs, permitting all mounting positions and facilitating the management of the stock.
The sizes 25 up to 90 are supplied with long-life synthetic oil and they don’t require any maintenance
Mating surfaces are machined for a perfect planarity
A paint coat cancels the negative effects of the aluminium porosity and protects the housing from oxidation
|
|
High volume vacuum Box Coater.
The 1200-DLF Box Coater deposits anti-reflective (AR) and / or mirror coatings on organic and mineral glass lenses via thermal evaporation process. It offers multiple process applications. This machine is built for highest throughput requirements in Rx-Lab and stock lens production. |
|
|
|
