|
|
TEMPERATURE CALIBRATORS
Accuracy up to ±0.15°C, stability up to ±0.02°C
For calibration of thermocouples, resistance thermometers, dial thermometers, glass thermometers, thermostats, etc.
- JOKER+: Ambient temp. up to +350°C
- QUARTZ: 50°C below ambient temp. up to +150°C
- FLUID 100: -10°C up to +125°C (portable fluid bath)
- FLUID 200: ambient temp. up to +200°C (portable fluid bath)
- PYROS+: ambient temp. up to +600°C (lowcost)
- PULSAR: ambient temp. up to +600°C
- SOLAR: +200°C to +1100°C
Stationary Calibration Baths:
- BK40-M: 40°C below ambient temp. up to +125°C
- TB300-M: +50°C to +300°C
|
|
ATC - Advanced Temperature Calibrator
Dry-block and liquid bath calibrators. The unique active dual-zone heating block is designed to ensure optimum temperature homogeneity in the calibration zone of the block. This design eliminates the major uncertainties due to heat loss through the sensor-under-test and from the top of the block. The dry-block design combined with the external reference sensor input make the ATC series as accurate as a laboratory calibrator but maintain the speed and portability of a dry-block.
The ATC measures the output from the sensor-under-test directly: Thermocouples, RTD, mV, mA, and V. There is no need for multiple instruments. The JOFRA ATC series saves time by performing automatic stand-alone calibrations. Just run the downloaded work orders from the JOFRACAL calibration software. After completion of the work orders, the results may be downloaded into the computer for analysis, filing, and printing of certificates.
|
|
|
|
|
|
Techne is a World leader in the manufacture of temperature controlled equipment from DNA testing with our
Thermal cyclers and Hybridisation ovens to Laboratory equipment such as our Water baths and Dri-Block
heaters. Techne also manufacture Industrial Fluidised Baths to remove residues from plastic mould tooling in
the industrial sector through to precision Fluidised Calibration baths and Dri-Block Calibrators.
The New Tecal 1200S Dri-Block Calibrator has now been introduced to extend the temperature range of our
Tecal Dri-Block calibrators. This unit has market leading stability and uniformity performance with easily
interchangeable insert blocks.
Wide Temperature range
The Tecal 1200S is designed to provide very
accurate and repeatable thermal calibration
between 150°C and 1200°C for a wide variety of
thermocouples and other temperature sensors in
industries such as glass manufacture, power
generation, automotive and material processing.
This rugged, economically priced portable
thermocouple calibration furnace is supplied with a
NIST traceable certificate or can additionally be
supplied with a UKAS certification. The unit
provides excellent stabilities to within ±0.1°C and
has display accuracy of better than ±3°C between
300 and 1200°C.
Special heater block design
The Tecal 1200S Block calibrator utilises a special
heater design for optimum temperature uniformity
and rapid heating rates. The heating system
consists of heater elements embedded in
lightweight vacuum-formed ceramic fibre mouldings
which allows faster heating rates and extends the
working life above other ceramic tube designs which have heater elements wrapped around a
ceramic tube. An isothermal block assembly is
machined from a special alloy giving excellent
thermal conductivity and also resists hightemperature
oxidation.
This block is designed to optimise performance
between sufficient mass for good stability and
uniformity and to have a low enough mass to have
rapid heating/cooling rates and short stabilisation
periods.
|
|
|
Calibration of humitiy and temperature measurement instruments is an important item. Humidity probes from all sectors of economy should be calibrated and- if necessary- be adjusted on a regular time schedule. ROTRONIC offers a vast choice of accessories for that purpose. Certified humidity standards, calibration devices for different probe types or mobile, fully autonomous humidity generators are just a few of them. These are of special interest for customer engineers and inspection equipment responsibles, who demand traceable and precise values.
|
|
|
|
|
|
JOFRA ATC-125 - the coolest temperature calibrator in the world
The JOFRA ATC-125 ultra cooler features a unique technology for optimum performance and superior temperature homogeneity throughout the block at very low temperatures. The JOFRA ATC-125 ultra cooler is the world's first temperature dry-block calibrator capable of reaching -90°C. Featuring patent-applied for Free Piston Stirring Cooler (FPSC) technology for cooling, together with a special heating element, the ATC-125 offers high accuracy, excellent stability and extremely fast heating and cooling times.
The ATC-125 ultra cooler calibrator may be used to perform fully automatic calibration routines without using an external computer. It is also possible to use the computer for full upload and download capabilities. The ATC-125 may also be supplied with inputs for external reference sensors and for sensors-under-test. All ATC calibrators feature RS232 serial communication and the standard delivery also includes the JOFRACAL calibration PC software.
|
|
|
Under the brand name JF Instruments, AMETEK offers a complete range of calibration equipment for temperature, pressure, and signal approved for marine use.
|
|
|
JOFRA DTI-1000 is a rugged, portable, battery-operated thermometer. Designed for use in the field. Today the DTI is in use in many national laboratories, calibration service companies, and calibration labs worldwide. Known for good accuracy and extremely low drift.
|
|
|
|
|
|
Recently, we introduced Metrology Wells, which provide the very best performance in portable temperature calibration. The new 914X Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.
Field Metrology Wells are packed with functionality and are remarkably easy to use. They are lightweight, small, and quick to reach temperature set points, yet they are stable, uniform, and accurate. These industrial temperature loop calibrators are perfect for performing transmitter loop calibrations, comparison calibrations, or simple checks of thermocouple sensors. With the “process” option, there is no need to carry additional tools into the field. This optional built-in two-channel readout reads resistance, voltage, and 4–20 mA current with 24 volt loop power. It also has on-board documentation. Combined, the three models (9142, 9143, and 9144—each with a “process” option) cover the wide range of –25 °C to 660 °C.
High performance for the industrial environment
Field Metrology Wells are designed for the industrial process environment. They weigh less than 8.2 kg (18 lb) and have a small footprint, which makes them easy to transport. Optimized for speed, Field Metrology Wells cool to –25 °C in 15 minutes and heat to 660 °C in 15 minutes.
Field environment conditions are typically unstable, having wide temperature variations. Each Field Metrology Well has a built-in gradient-temperature compensation (patent pending) that adjusts control characteristics to ensure stable performance in unstable environments. In fact, all specifications are guaranteed over the
environmental range of 13 °C to 33 °C.
|
|
|
The CE-350 is a low-cost alternative to the Tecal 425S where routine checking of RTD and thermocouples is all that is required. For such applications, it is important that the unit is very portable (only weighs 1.5kg) and can calibrate the sensors as quickly as possible (can heat and cool over the temperature range in a matter of minutes). Typical applications where the CE-350 can be used are in checking fire alarm detectors, industrial ovens, dryers, etc.
|
|
|
This temperature calibrator is ideal for calibrating temperature sensors used in the food and pharmaceutical industries as well as calibrating any sensors used in the temperature range outlined in the specification below.
|
|
The PTC 400 Precision Temperature Calibrator is an ideal device to handle all of your temperature calibration needs in a truly rugged,low-cost package.It combines virtually all widely used thermocouples and RTDs in one device — you ’ll never have to worry about finding a temperature device you can ’t calibrate. This is especially true when calibrating "smart ” or pulsed RTD transmitters,where many other calibrators fail to work or operate at reduced accuracy specs.The PTC 400 handles those applications with ease.
|
|
Features
- Lightweight and very portable
- Accuracy to ±0.25 °C
- RS-232 and Interface-it software included
- Easy to recalibrate
|
|
SIKA Precision Temperature Calibrators, TP 38 000 / TP 38 000 E series
Calibrating with every convenience
Working more cost-effectively, safely and reliably in the range from -30°C to 600°C
Thermometers, thermocouples and other temperature sensors are subject to mechanical, thermal and chemical stresses especially in industrial use. This leads with increasing time to a drift that is not predictable.
Since the temperature in industrial processes has become one of the most important indicators of quality, operating safety and service life, the calibration of temperature sensors on site has achieved special importance.
Inaccurate temperature measurements reduce product quality, increase the risk of failure and lead to increased energy consumption.
Only the regular calibration of the sensors provides information on the difference between actual and measured temperature and thus makes the specific drift behaviour visible.
|
|
|
This temperature calibrator is ideal for calibrating temperature sensors used in the food and pharmaceutical industries as well as calibrating any sensors used in the temperature range outlined in the specification below.
|
|
Portable thermostatically-controlled bath Ambient temperature to +200 °C
Fields:
- Chemical and Petrochemical Industry
- Food and Beverage Industry
- Pharmaceutical and Biotechnical Industry
- Heating, Ventilation and Air Conditioning
- Machine and Process Industry, Power Plants and Distribution, Automotive Industry
Type FLUID200
|
|
Characteristics:
- Continuous simulation of Pt100-Signals with a direct high resolution digital-display and temperature measuring
- Simultaneous measuring of signals and simulation of current and voltage signals
- Simulation from current signals and 2-wire-transmittersignals
- Pneumatic check devices with electronic pressure measuring and handpump for simulation of pressures
|
|
Dry Block Temperature Source/Calibrator DBC 150/650 Series
Two models cover temperatures from -45°C below ambient to 650°C available as a stable source or complete calibration system.
Druck, a leading manufacturer of portable and workshop calibrators, has redefined the term %u201Ctemperature calibrator%u201D with the introduction of the DBC series. This innovative calibrator combines a highly stable temperature source with precision measurement of temperature probe signals, providing a truly stand-alone temperature calibrator suitable for laboratory, workshop and portable use.
Features & Benefits:
Ranges from -45° to 650°C
Rapid heating, cooling and setting
Switch test, ramp, step and preset functions
Reads set temperature and device output simultaneously
Measures reference probe, RTD's, T/C's mA, mV and ohms
Automated calibration via RS 232
|
|
Calibration Baths
The JULABO calibration baths are perfectly suitable for applications in calibration laboratories and conform to the requirements specified by DIN ISO 9001:2000. The instruments provide highest temperature stability to ±0.005 °C and temperature uniformity better than ±0.01 °C. The series include models with cooling units for working temperature ranges from -30 to +200 °C as well as calibration baths for temperature ranges from +50 to +300 °C. Reference temperature measurements can be carried out with an additional precision reference sensor. This saves additional costs of a digital thermometer.
|
|
|
|
|
|
Liquid and odd/big size sensor calibration
Two models of the ATC series (ATC-140 and ATC-250) fitted with a 160 mm deep well with a diameter of 63.5 mm (2.5 in) can be used both as dry-block calibrators and as liquid calibration baths with a magnetic stirrer.
A liquid bath and a dry-block diameter of 63.5 mm (2.5 in), which is twice the size of any other JOFRA dry-block, are both new in the JOFRA product range. With these options it is now possible to calibrate even more temperature sensors at the same time and to calibrate large as well as odd sizes and shapes of sensors, which were not possible to calibrate in the existing range. The compromise compared to the existing models is longer cooling, heating and stabilization times.
ATC-140 & ATC-250 can be used without an external reference sensor, but if a STS-100 reference sensor is connected directly to a B version or the JOFRA reference thermometer DTI-1000, you obtain better accuracies and thereby use the full potential of the calibrators.
|
|
Features
- 457 mm (18 in) of depth with just 15.9 liters (4.2 gal) of fluid
- Perfect for liquid-in-glass thermometers with optional LIG kit
- Fast, quiet, compact (yet deep!), and economical
|
|
Compact, accurate and reliable liquid baths for the temperature calibration of thermal sensors.
- 5, 7 and 12 litres.
- -35°C* to 250°C.
- Temperature stability as good as ±0.005°C.
- Drain tap.
- Water cooling coil.
For use in the area of temperature calibration this range of compact liquid baths offers exceptional control stability over a temperature range of -35°C* to 250°C.
The bath comes in 5, 7 or 12 litre capacity with a choice of controller options giving control stability as good as ±0.005°C.
|
|
|
|
|
|
The Techne liquid calibration bath (LCB) series offer compact, accurate and reliable liquid baths which can be used for external circulation or temperature calibration of thermal sensors.
- -35°C to 250°C
-Three different capacities available; 5, 7 or 12 litres
-Temperature stability; ±0.005°C depending on choice of control unit
-Fully insulated bath for excellent heat retention
-Analogue or digital temperature selection
-Includes cover, lid and bridging plate
When temperature calibration is required the compact liquid baths offers excellent stability over the entire temperature range. The LCBs can be also be used for external circulation to maintain temperatures of samples in viscometers, photometers, refractometers, fermenters and other reaction vessels.
All models of LCB offer high pump performance and exceptional thermal stability up to 250°C.
The baths are fully insulated on all sides and base and are fitted with a cooling coil for connection to a cold water supply for use at temperatures around ambient. The minimum temperature achievable is -35°C when a Dip or Flow Cooler is added to the system.
Each bath is supplied complete with lid, drain tap, carry handles and hole to position a certified sensor.
|
|
The BFS is designed for applications requiring a constant high temperature source for calibration. The BFS has a hinged lid and a cylindrical bath 218mm in diameter and 254mm deep. Substantial fire brick insulation is incorporated within the outer container and the lid.
Standard equipment includes a separate air supply control unit which incorporates two flowmeters for monitoring the air supply and a charge of fluidising medium (aluminium oxide) and air diffuser (zirconium oxide).
|
|
|
|
|
|
Tempsens an ISO 9001:2000 company offer a wide range of Calibration Equipments designed to provide stable, uniform & accurate temperature enabling professionals to calibrate all types of temperature sensors including thermometers, RTDs, thermocouples, temperature gauges, Switches, Pyrometers etc..
Calibration Equipment range comprises of :
- Dry Block Calibrators,
- Black Body Sources,
- Stirred Liquid Baths.
Features:
- operates on 230VAC, 50/60Hz
- Temperature range from -40°C to 1700°C.
- Available in both Laboratory and Portable model
- These are equipped with a digital self tuned part, PID controller which enables the user to achieve stability at lower and elevated temperatures.
Models Range Stability
CALSYS -30/+50
(Negative Temperature Bath) -30...+50ºC ± 0.1ºC'
CALSYS 300 (Oil Bath) 50...+250ºC ± 0.1ºC
CALSYS 650 (Dry Block Bath) 50...+650ºC ± 0.3ºC
CALSYS 1100 (Dry Block Bath) 300...+1100ºC ± 0.5ºC
CALSYS 1200 (Dry Block Bath) 300...1200ºC ± 0.5ºC
CALSYS 1500 (Dry Block Bath) 500...+1500ºC ± 1ºC
CALSYS 1700L 500…+1700°C ± 1ºC
BLACK BODY SOURCES
CALsys 650 (Multi) 52...+650ºC ± 0.3ºC
CALsys 1200BB 300...+1200ºC ± 1ºC
CALsys 1500 BB 500...+1500ºC ± 1ºC
CALSYS 1700BB 500…+1700°C ± 1ºC
Tempsens is the only private sector company in the country owning Fixed Point Temperature calibration Laboratory with NABL Accreditation.
Calibration of contact and non contact type sensors can be made in temperature range of -38°C to 1500°C & 50°C to 1500°C. Also offers both in house and on site temperature calibration.
|
|
|
The UniCAL is a isolated calibration bath of stainless stell for operation using water, alcohol or transfer oil as temperature regulation liquid. The temperature level is controlled by a Unistat connected to it using hoses and is therewith limited. This results in good mixing characteristics and a homogeneous temperature distribution within the bath.
|
|
Fluidized baths offer an open work area with the potential for a wide range of applications where a stable temperature environment is required. They use a media that never needs replacing and doesn't evaporate, are safe to operate and thus a logical choice over molten salt baths, high temperature oil baths and ovens and furnaces. Click here to learn more about Fluidized baths and how to they work?
Applications for Fluidized baths (a few of the many):
Verification & calibration of temperature sensors, devices and systems (Lab Series, FB08)
Shape setting of various metals including Nitinol for Medical Stents (FB08)
Cleaning of tooling (breaker plates, screws, heads, nozzle) used in plastics manufacturing (IFB series)
Tempering, annealing & Nitriding of various metals (all models)
Reactive chemical analysis including distillation (all models)
General heat treatment applications up to 600ºC/1112ºF (all models)
Thermal analysis of devices, components and materials (all models)
|
|
|
|
|
|
Techne® SB series Fluidized baths operate from ambient to 600°C, and provide a working environment that is dry, easily accessible, and free from the dangers associated with high temperature oil or salt baths. Our fluidized baths are bench standing, requiring only an electrical and air supply for operation.
Air passes through the mass of the AL2O3 particles via a porous plate in the base of the unit separating the
individual particles and suspending them in free air, providing the properties of a liquid bath. Heaters in the bath
maintain temperatures of up to 600°C. All SB Series Baths incorporate stainless steel inner containers insulated
from outer walls, and a safety air pressure switch in the event of loss of air.
Baths are controllable to within +/-1°C, making them ideal as general purpose high temperature environments for
comparison calibration, metal treatment, distillation, and other high temperature applications.
All Fluidized baths are supplied with an initial charge of
aluminum oxide fluidizing media and overspill flange.
|
|
Tempsens an ISO 9001 company offers Master Sensors that are used with an accurate temperature source to evaluate the performance of the process and for testing process.
Tempsens provide Master Sensors for both Thermocouple & RTD.
RTD Master Sensors:
- Accuracy upto 1/10, 1/5, 1/3, 1/2 Din, Class A
- Sheath material: SS316 and Inconel
Thermocouple Master Sensors:
- Available for K, N, R, S type thermocouple
- Accuracy upto special, class 1
- sheath material: inconel & Ceramic
Cold Junction Probes are available for J, K, E, N, R, S, B type thermocouple.
Dual Probe is also possible in one Housing.
|
|
| ... products without technical information |
| |
|
|
