|
|
|
The New INHECO Multi TEC Control can handle up to 6 different CPACs or shakers simultaneously and independently, providing maximum flexibility for larger applications.
|
|
|
|
|
|
INHECO Single TEC Control (STC)
The INHECO Single TEC Control (STC) is a compact plug & play temperature and RPM controller for the use with INHECO’s CPAC and temperature controlled shaking devices. The controller box includes a temperature controller with high accuracy, a device connector slot, a touch display, a wide-range power supply for worldwide use, an USB interface, a rugged housing and a RPM controller for shaking operations.The STC can be individually equipped with a controller slot for the CPAC devices or with a controller slot for temperatur controlled shakers. The device slot can be exchanged easily, giving maximum flexibility. The STC can be either operated manually using the touch screen, or through an USB interface. The soft- and firmware of the controller allows programming of complex temperature and shaking sequences.
Application Areas
The STC is mostly used together with the principal INHECO heating/cooling/shaking units in/on robotic platforms and systems in Lab Automation. The purpose is to form temperature controlled areas, which offer direct and easy access by robotic grippers and pipetting heads. The STC is designed for the use in fundamental research, drug discovery, clinical research and diagnostics in the Life Science market. The STC is also prepared for use in customer IVD applications.
The STC is used with the following INHECO heating/cooling units:
- CPAC Microplate
- CPAC Ultraflat
- Variomag Teleshake
- Variomag Thermoshake
|
|
Universal water temperature controllers for the demanding injection moulder
- precise microprocessor control
- simultaneous display of set and actual values
- simple one button operation
- optional flow monitoring
- optional connection for external thermocouple Fe-CuNi or Pt 100
- optional interfaces at front panel
- splash proof electrics
- ready to connect with 3 m long mains cable and CEE socket
|
|
|
|
|
|
Profile:
PMA™ - is a respected European brand of digital and electronic process controllers, bus and PLC temperature controller systems including a complete line of bus and PLC system models used for temperature, pressure, flow and level applications. For over 75 years, PMA has been active in developing leading edge process control products and solutions for measurement and control technology under the slogan “wir kriegen’s geregelt” which literally translated into English means “we get it regulated and controlled” or more loosely translated “close the loop with PMA”. The PMA group and their controller product line was originally owned by Philips Industrial Electronic Corporation from 1975 to 1995. In 2001, PMA was then acquired by another Dutch conglomerate by the name of Geveke Industrial Group before being acquired in February 2005 by Danaher within the Danaher Industrial Control Group environmental controls business segment.
Products:
Process Automation & Sensing Controls: Electronic, front-to-panel temperature controllers and behind-the-panel, bus and PLC temperature controller systems.
|
|
| ... products without technical information |
| |
|
The 100 to 200 CFM unit is our smallest conditioner and is conveniently designed to run on a 15 amp 115 volt power source. This unit does not require compressed air or ultra pure water (tap water is generally fine). The interior and exterior are constructed of corrosion-resistant stainless steel. Low watt density heaters also contribute to the unit's durability.
|
|
|
ACUair® hygienic air-handling units incorporate state-of-the-art technology to provide refrigeration and meet filtration, pressurization, condensation control, and sanitization standards required by the food processing industry. Designed for rooftop installation, the units are custom engineered to produce the psychrometric conditions you specify. ACUair® products are the answer when clean conditioned air is needed for today`s hygienic food processing requirements. We offer a wide range of air distribution accessories including supply air diffusers, return air boxes or grills, and exhaust fans.
|
|
Product Features
* The DC line of Evaporators developed out of our commitment to supply products for specific customer applications.
* The DC line incorporates two vertical coils mounted parallel to each other with a common fan section between the coils.
* The two-coil design allows for maximum capacity with energy efficient propeller fans in a low profile design.
* They can be specified as either two-directional horizontal air flow or single direction vertical down air flow.
* Interconnecting piping is provided to simplify system design and minimize field connections for the installing contractor
|
|
24 hour on-line diagnostic system
Energy saving and extention of aircon operating life
Maintenance management via service reports
Reliable service at short lead time
|
|
PGC's humidity generating systems are unique. The sources for humidity,
dehumidification, heating, cooling, and circulation are all packaged in
one self-contained unit. This unit is specifically designed to provide 500-
1000 CFM of conditioned air to rooms up to 2200 cubic feet. The conditioner is designed to produce very precise humidity and temperature
control.
Since this generating unit is selfcontained, it can be easily used to
condition existing spaces, small walkin rooms, and custom chambers. The
conditioner can be positioned on top or beside of existing chambers or rooms to circulate conditioned air through the contained space.
FEATURES:
- Precise temperature and humidity control
- High grade temperature compensated humidity sensor
- Stainless steel construction
- High-low or deviation alarms
- Compact Package
BENEFITS:
- Consistent and accurate results
- Confidence in the measured condition
- Durable
- Security and safety
- Easy to apply
|
|
| ... products without technical information |
| |
Features:
-Superior Low Energy Control for Micro Welding
-Ultra Fast Closed Loop Control
-Single Phase Power Supply
-Three Feedback Modes for DC Welders
-Graphical Display and Intuitive DC Welder Monitoring
The UB25 linear DC welder provides unsurpassed levels of control for micro-miniature resistance welding. This DC welder power supply should be used for smaller applications where closed-loop feedback control and fast response times are required. Safety critical applications such as those found in the medical and automotive markets will benefit from UB25’s precision low energy control.
|
|
Low Power Linear DC Welder with Built-in Monitor - UB25
Features:
- Superior Low Energy Control for Micro Welding
- Ultra Fast Closed Loop Control
- Single Phase Power Supply
- Three Feedback Modes for DC Welders
- Graphical Display and Intuitive DC Welder Monitorin
The UB25 linear DC welders (successor to the Unibond II) provide unsurpassed levels of control for micro-miniature resistance welding. These DC welder power supplies should be used for smaller applications where closed-loop feedback control and fast response times are required. Safety critical applications such as those found in the medical and automotive markets will benefit from UB25’s precision low energy control.
|
|
|
|
|
|
PS-900 Soldering System
The power to solder demanding loads, the control to assure consistent results.
The OKi PS-900 Soldering System, powered by SmartHeat® Technology, is part of a new generation of cost-effective soldering systems from OK International. The PS-900 packs power and provides exceptional thermal control into a small benchtop footprint. The PS-900 provides operators the repeatability to produce high quality solder connections with exceptional speed.
More Applications
The PS-900 increases productivity by performing a wide range of applications. It is suited for lead-free soldering processes, multilayer boards and thermally demanding components. What's more, SmartHeat technology enables the PS-900 to solder at lower temperatures, even for such demanding applications as lead-free soldering processes. This means operators are more productive and materials are safe from damaging temperatures.
Low Operating Costs
The PS-900 is designed for simplicity and low maintenance. With SmartHeat Technology at its core, it requires no calibration. Moreover, it uses high quality tips that assure low ongoing operating costs. Its low cost makes it the perfect choice for small or large production environments, which need exceptional performance, while being mindful of operating budgets.
|
|
Eye-Rim forming machine 2D/3D
Aquisition of the model through a feeler pin. Better accuracy of the finished product thanks to the improvement of the wire properties by using a set of pressure rollers in the horizontal and vertical axes. Easy and quick machine setup when changing wire dimensions. Double check to verify there is no wire slipping to prevent any length difference. Highly precise and fast hydraulic cutting system with the possibility to choose a straight or a "V" cutting. Built-in PC and 14' "CRT monitor" equipped with a continuity group to prevent any data loss in case of black out. Easy realisation of new rim models, with curvature from 4 to 9. Easy correction of both eye shape and curvature where necessary. User-friendly "help on line" software.
|
|
|
|
|
|
The Master Controller V2 is a computerized industrial control unit housed in a robust stainless steel container, designed for automatic and semi-automatic management of soldering cycles carried out using CEIA Power Cube Induction Generators.
The Controller comes with a set of four predefined programs. All operating parameters for each phase of the heating cycle can be programmed within a wide range of values. This allows maximum flexibility in setting the heating and cooling times, the power supplied by the induction generators, the operating temperatures for the piece being worked on and the quantity and feed speed of the solder.
Together with the optical temperature sensors (SH series) and the solder dispensers (WF series), the CEIA Master Controller V2 allows the creation of efficient induction soldering systems and achievement of completely repeatable, economical heating processes and finished products.
An RS-232 serial interface allows connection to a PLC, PC or external logic for remote loading and running of operating programs.
The photocoupler-type static inputs have programmable P/N logic, and together with the static outputs are subject to a programmable auxiliary voltage of 12/24 V.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
