|
|
|
|
|
|
Performance at small prices
***The New Series of Indicators and PID Controllers of B B Thermo-Technik***
B B Thermo-Technik presents a new series of low cost indicators and digital temperature or universal controllers.
Available from 77,- € on, the PID 1/16 DIN temperature controller was designed also for non-experienced users: combining extreme simplicity in operation with high performance only found in expensive high end controllers. It accepts most thermocouples and Pt100 RTD, features a relay and pulse output for driving solid state relays.
The Universal Controller series accepts thermocouples J, K, T, E, N, R, S, resistance thermometer Pt100, V, mV, mA. They hold in one single instrument all the major features that are needed for the vast majority of industrial processes. Both input and output are selected through the front keyboard without hardware change.
The low cost temperature indicators available from 69,- € are easy-to-use also ideal for non-experienced users. Much performance at an acceptable price! Universal indicators at reasonable prices are also available!
Further information will be found at our Temperature Shop:
www.temperature-shop.eu
|
|
The Temperature Relay TR-42 has been designed for continuous monitoring of the temperature, the cooling fan's control and overheat protection for resin or air insulated three-phase transformers.
Thermal detectors PT100 DIN 43760, three of them located inside the transformer coils and the fourth at the core, detect the temperature.
The TR-42 relay is microprocessor-based equipment designed to satisfy all control requirements and guarantee high reliability.
The TR-42 perform the following functions:
Measurement:
* Coils and core transformer temperatures, automatically each 5 sec or manually.
* Highest temperature indication and storage.
Signaling and programming:
* 7 segment display and led indication.
* Simplified programming through frontal push buttons.
* Display and non volatile storage of: alarm temperature, trip temperature, fan on, start and stop fan temperature, highest RTD temperature, baud rate of serial transmission, and assigned relay address.
|
|
|
Fuzzy logic is an essential feature of this versatile controller. Although PID control is widely accepted by industry, it is difficult for it to work efficiently in some systems - for example: systems of second order, long lag-time systems, and systems with various set points and loads, etc. This fuzzy logic temperature controller will enhance PID control. Fuzzy logic will adjust PID values indirectly to make the manipulation output value (MV) adjust flexibly and quickly adapt to various processes. This enables a process to reach its predetermined set point in the shortest time with minimum overshoot during tuning or external disturbance.
|
|
KT4 - small standard type
- 1/16 DIN size temperature controller
- Size: 48 x 48 x 95mm (WxHxD)
- Panel-mounted type
- IP66
- 2nd optional alarm output
- Heating and cooling control with 2nd optional control output (non-contact voltage output)
|
|
| ... products without technical information |
| |
|
The series A4 digital differential pressure controller is a patent pending microprocessor based pressure controller for positive, negative, and differential pressure as well as velocity and flow. The Series A4 differential pressure controller includes (2) 8A SPDT relays and an associated software package that allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user friendly menu on the OLED display or uploaded using an OptiLink™ programming key. The OLED also displays the exact setpoints or other user defined variables during normal operation. Furthermore, the menu structure can be customized by moving variables to different menu levels to accommodate many applications. Compared to other mechanical products, the Series A4 digital differential pressure controller has a significantly reduced depth, an improved look, and better performance at a similar price.
|
|
|
The series A3 digital differential pressure controller is a patent pending microprocessor based pressure controller for positive, negative, and differential pressure as well as velocity and flow. The Series A3 differential pressure controller includes (2) 8A SPDT relays and an associated software package that allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user friendly menu on the LCD display or uploaded using an OptiLink™ programming key. The LCD also displays the exact setpoints or other user defined variables during normal operation. Furthermore, the menu structure can be customized by moving variables to different menu levels to accommodate many applications. Compared to other mechanical products, the Series A3 digital differential pressure controller has a significantly reduced depth, an improved look, and better performance at a lower price.
|
|
P820
motor-controlled, for air, vacuum or water
of brass, 0 - 10 V or 24 V
G1/2 - G1, 0 - 1000 / 3500 l/min
|
|
%u2022 The FLOWTRONICD consists of a fast, direct-acting 2-port proportional valve, a pressure sensor
unit and digital control electronics.
%u2022 Especially designed for applications placing extreme dynamic demands on fl ow control.
%u2022 Control and maintenance of constant and even fl ow, irrespective of outside infl uences.
%u2022 Precise measurement of fl ow with two sensors.
%u2022 Adaptable to different applications due to the use of digital control electronics that can be
confi gured by PC over a USB interface.
%u2022 Auto-tune function and ASCO FlowCom PC software provide for quick and easy start-up.
%u2022 Diagnosis over integrated LEDs or the ASCO FlowCom PC software.
|
|
%u2022 The FLOWTRONICD consists of a fast, direct-acting 2-port proportional valve, a pressure sensor
unit and digital control electronics.
%u2022 Especially designed for applications placing extreme dynamic demands on fl ow control.
%u2022 Control and maintenance of constant and even fl ow, irrespective of outside infl uences.
%u2022 Precise measurement of fl ow with two sensors.
%u2022 Adaptable to different applications due to the use of digital control electronics that can be
confi gured by PC over a USB interface.
%u2022 Auto-tune function and ASCO FlowCom PC software provide for quick and easy start-up.
%u2022 Diagnosis over integrated LEDs or the ASCO FlowCom PC software.
|
|
LCD Controllers
Digital View is the leading supplier of LCD interface solutions for application specific OEM display products.
* Suitable for project design-in
* Industrial standard components chosen for high MTBF
* Extensive range of standard features
* Highly flexible panel support
* Comprehensive OSD control
* Customisation for specific application requirements
* Cost effective global organization with volume manufacturing in Asia
|
|
| ... products without technical information |
| |
The Pix-Cell is a high performance, programmable Cellular Single Board Controller, that offers built-in digital and analog I/O combined with GSM/GPRS connectivity in a compact form factor. The heart of the GSM controller is a Microchip PIC18F6722 operating up to 32MHz which provides fast data processing. Design your applications with an integrated BASIC, PASCAL or C compiler designed specifically for Pix-Cell GSM Controller.
Features:
- Small Size: 95x60x15mm.
- Microchip PIC18F6722 controller at 32MHz.
- 128KB Flash for user memory application.
- 32kB of EEPROM Memory.
- 3 Protected Digital Inputs.
- 3 10-bit Analog Inputs.
- SPDT Relay Output.
- RS232 serial communication.
- GSM/GPRS Cellular Modem.
- Normal and Sleep Mode operation.
|
|
World's easiest GSM/GPRS Controller, embedded with a powerful PIC18F6722 Microchip processor, that offers built-in digital and analog I/O combined with GSM/GPRS connectivity in a compact form factor. Develop your application script simply and fast with the built-in libraries written in BASIC, PASCAL or C.
The Smart-Cell GSM Controller will reduce your Total Project Cost. It is specifically designed for reliable independent operation under most demanding field conditions.
Features:
- Microchip PIC18F6722 controller.
- 128KB User Flash Memory.
- 32kB of EEPROM Memory.
- 6 Protected Digital Inputs.
- 6 10-bit Analog Inputs.
- 4 SPDT Relay Outputs.
- Graphics Display Connector.
- 4x4 Keypads Connector.
- 2 RS232 serial communications.
- GSM/GPRS Cellular Modem.
- Normal and Sleep Mode operation.
- Battery Input for Back-up.
- Main voltage input indication.
- 2 LED's indicator.
- Ethernet Communication – Optional.
|
|
|
Dedicated PAL/NTSC input controller supports dual Composite ports, plus S-Video input ports on panel resolutions up to 1280 x 1024. Supports Digital View serial port protocol.
|
|
|
|
|
|
Epsilon EP
“Motion Made Easy”TM
230V Servo Drive Systems
Epsilon EP, the compact and easy to use servo drive, is scalable from a simple amplifier to a completely programmable 1.5 Axis motion controller. The Epsilon EP comes in 3 flexible models, and 5 drive sizes — 2.2A, 4.0A, 6.5A, 9.0A and 16.0A, able to deliver over 40Nm of torque at the rated motor speed.
3 functional configurations:
Base: Epsilon EP-B
This base drive is ideal for servo applications utilizing an external motion controller. The EP-B has the unique capability of combining an analog command with a preset velocity for trimming or advance/retard operations. The EP-B drive is an excellent choice for stepper replacements or centralized control systems.
Indexer: Epsilon EP-I or EP-IDN
The EP-I drive is a highly capable position controller that provides Home, Index, and Jog motion profiles. The EP-I has a unique alternate mode feature whereby it can perform an Index or Home function, and then switch to an alternate mode such as analog torque, analog velocity, or pulse follower mode on the fly! This compact indexing drive is a cost-effective solution for countless applications.
Programming: Epsilon EP-P, EP-PDN and EP-PPB
The EP-P drive provides the highest level of control by allowing the user to create complete user programs to sequence the motion control along with other machine functionality. The EP-P can be used to solve the most complex motion applications and still be easy-to-use because of the PowerTools Pro configuration software. With intuitive software and plenty of online help, programming this servo drive is easy; in fact it is “Motion Made Easy!”
|
|
DigiFlex® Performance™ series: Any Control - Any Motor - Any Feedback
This means you the designer can choose the best of breed components for your system. Control, Motor, and Feedback and ADVANCED Motion Controls will fit neatly in the middle.
How can we do this? Under a single platform, the DigiFlex® Performance™ series offers more than 130 variations to meet any need.
DriveWare™ Software
DriveWare™ gives full control of your command scheme, tunig parameters, I/O functionality, troubleshooting and more.
|
|
¨ 5 Digit Rate Display, 8 Digit Totalizer Display.
¨ Local Magnetic or Remote Reset.
¨ 4-20mA Analog Output.
¨ Powered From Battery, DC Supply, 4-20mA Output
Loop, or AC Line.
¨ 20 Pt. Linearization Option.
¨ Isolated Scaled Pulse Output.
¨ Alarm Output for Rate or Total.
¨ Windows® Configuration Program.
¨ RS 232 Port for Configuration and Monitoring.
¨ Diagnostics for Pulse, Alarm and Analog output.
¨ Password Protection for Menu and Reset.
|
|
♦ Displays Rate & Total Simultaneously.
♦ 4½ Digit Rate Display, 8 Digit Totalizer Display.
♦ 4-20mA Analog Output.
♦ Powered From Internal Battery, External DC
Supply or 4-20mA Output Loop.
♦ 10 Pt. Linearization Available.
♦ Isolated Scaled Pulse Output.
|
|
|
|
|
|
The Ashcroft® Digigauge® Family brings industry leading features to the marketplace.
The award-winning Ashcroft® digital test gauge features unmatched accuracy specifications of .05% Terminal Point, Total Error Band full-scale including span, linearity, hysteresis and temperature from 0 degrees to 1500 degrees F.
The new Ashcroft Type 2089 digital gauge comes in the industry’s smallest case size of (3") yet has the largest display – larger than even competitors' 4" gauges. The display offers backlighting with adjustable contrast levels. This gauge features 12 selectable engineering units, seven languages, and it can be calibrated in the field. Calibration and dampen modes are password protected. Three AAA Alkaline batteries provide over 1000 hours of battery life. The gauge is CE approved and FM approved for intrinsically safe operations, Class1, Division 1.
The Ashcroft® Type 2274 industrial digital gauge has the breakthrough features of 4-20 mA output, switching capability, and an extra large digital display. It is available in three case types.
The general purpose digital gauge, Type D1005PS, has 1/2% full-scale terminal point accuracy, large 1/2 inch character size and brings standard features to the digital gauge market that, until now, were either not offered or were provided only as options on competitor's products.
|
|
| ... products without technical information |
| |
|
The Series A6 is a microprocessor based controller for positive, negative, and differential pressure as well as velocity and flow. The Series A6 has a 316L Stainless Steel cover to meet clean room and other high purity and wash down requirements. It features (2) 8A SPDT relays for control and an optional digitally scaleable 4-20 mA output. The associated software package allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user friendly menu on the OLED display or uploaded using an Opti Link™ programming key. The OLED also displays the exact setpoints or other user defined variables during normal operation. Furthermore, the menu structure can be customized by moving variables to different menu levels to accommodate many applications.
|
|
|
|
|
|
-Robust technology and design
-High tolerance of up to 1.000 % overload
-Plug-and-play installation
-High accuracy, High resolution
-Hermetically sealed to IP68
-Interfaces: RS485, Profibus DP, DeviceNet, 4-20 mA, 0-10 V
-Digital filters
-ATEX certified
-3 years warranty
-Patented worldwide
The shockproof digital load cell is based on a capacitive measurement principle where a non-contacting ceramic sensor is mounted inside the load cell body. As the load cell contains no moving parts and the sensor is not in contact with the load cell body, the load cell tolerates shocks, torsion, and very high overloads and sideloads. Therefore, the mechanical installation of the load cell can be done without expensive and complicated mounting kits and overload protection devices.
The electrical installation of the digital load cell is pure plug-and-play as the signal from the non-contacting sensor is directly converted, compensated and calibrated by a microprocessor to a digital load cell output in grams, kilograms, or Newton. Measurements and status codes are transmitted as RS485 data on a single wire coaxial cable (RG-58) which may be up to 100 meters long.
The technology and mechanical design of the Eilersen load cells is covered worldwide by a number of patents.
|
|
Ultra ISC Tension Load Cell : Web Tension Control
The Ultra ISC is a tension transducer that directly outputs a +/- 10 VDC signal. CMC offers an ISC version for all models of our Ultra tension transducers. All Ultra ISC transducers include an Integrated Signal Conditioner (ISC) that is embedded directly in the "Ultra" type tension load cells. This is accomplished by extending the connector housing one inch and inserting a proprietary integrated amplifier designed by CMC.
|
|
|
|
|
|
BZH Measuring direction horizontal, up to 6300 N
The web tension load cells of the series BZH are of a compact pillow block design and suitable for a variety of applications.
The sensors basically consist of two mounting plates which are connected by measuring elements. The mounting plates are designed to accommodate pillow block bearings of the following manufactures: INA, FAG, SKF and NSK.
The measuring elements function according to the double beam principle. The acting forces are captured by strain gauges applied to the measuring elements.
HAEHNE offers for all its sensors a corresponding range of amplifiers to condition the measuring signal and deliver the bridge voltage supply. The signals at the output terminals of the amplifier are proportional to the acting radial force. They can be digitally displayed or used as actual values in a closed control loop.
Features
Compact load cell design
Easy modification to different pillow block bearing designs and sizes
High overload protection utilising mechanical stops
High resonant frequency
|
|
Catridge Style Load Cells
Ultra Cartridge-Style Load Cells provide a highly responsive linear output signal for measuring, monitoring and controlling web tension in continuous processes. They utilize a full-bridge semiconductor strain gages and a temperature compensation network for consistent accuracy and performance. For application flexibility and convenient machine installation, Ultra Cartridge Style Transducers are available for stationary shafts, for wire or narrow webs, and with flange and pillow block mounting kits.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
