|
|
|
The CT224 consists of a 12-Channel Temperature Monitor and MincoSoft™ CT224 Software. It is the next generation in temperature monitoring equipment from Minco designed to meet the needs of electric machinery protection. The 12-channel scanning capability, standard RS485/RS232 interface and Windows-compatible software utility for system configuration and data logging provide overtemperature and undertemperature protection and critical feedback to safeguard expensive machinery.
|
|
|
|
|
|
Multi-funcitonal Thermocouple Thermometer ( DTM-3105 )
Thermocouple Thermometer Model DTM-3105
FUNCTION:
ON/OFF, HOLD/TEST, °F/°C, MIN/MAX ( °F/°C) MEMORY RECALLING
* Carrying Case and 4 TC probes Included
PROBE MODEL NO.:
1. DTM-3105-TPK4 Surface probe (230 mm)
2. DTM-3105-TPK5 Air probe (235 mm)
3. DTM-3105-TPK03R Round head immersion probe (130mm)
4. DTM-3105-TPK03S Pin point head immersion probe(125 mm)
FEATURES:
Rubber coated product case
High degree of accuracy
Extra EVA box for easy and protective storage
Four probes included
Comprehensive and variety use for different object (e.g. surface, semi-solid, air)
Large LCD display
MEASUREMENT RANGE
-100°C ~ +300°C or -148°F ~ + 572°F
RESOLUTION:
0.1° for -199.9° ~ +300.0°
ACCURACY:
± 2°C from -200°C ~ -50°C (or 4°F from -328°F ~ -58°F)
± 1°C from -49°C ~ +300°C (or 1.8°F from -56.2°F ~ +572°F)
Accuracy is specified for operating temperatures over the range of 18°C to 28°C (64°F to 82°F). The basic accuracy specification does not include the error of the thermocouple probe.
|
|
Limit value monitoring devices
SG-mc Digital
Limit Indicator
35 mm DIN - rail mounting
* Universal sensor input
* (Pt 100,TC, 0 / 4...20mA, 0...10VDC)
* Alarmcontact free programmable with latch function or without latch function.
* Latch-reset by mini-switch or by power on/off
* Easy handling
|
|
|
|
|
|
The LumaSense Accufiber®TR solution provides temperature monitoring with automatic emissivity correction. Emissivity changes are due to changing material properties during certain types of material deposition or processing. For specular (smooth) surfaces, the deposition surface’s emissivity can be calculated from its reflectance. By constantly measuring this reflectance, the AccufiberTR instrument can automatically perform the emissivity correction in-situ and calculate the surface’s true temperature.
AccufiberTR seamlessly integrates ultra precise reflectance measurements with LumaSense’s class leading, lowest signal-to-noise ratio radiation detectors. If the n and k values are known for the materials, then the amplitude and periodicity of the thin film reflectance (often referred to as “fringes”) at specific wavelengths can be used to calculate film thickness. For thin films, it is critical to use both the highest quality measurement systems and shorter wavelengths to offer “resolution” into the film’s fringes to monitor film thickness.
|
|
Turbine Sentry - System Overview
An overview of the complete system and how this system is of benefit to gas turbine operators.
A typical system comprises three parts:
Blade Sentry - Measurement Pyrometer
The non-contact thermometer is mounted through the gas turbine casing and measures the temperatures of individual rotor blades.
Rotor Sentry - Data Acquisition System
The DAS logs individual blade temperature readings taken by the measurement pyrometers, samples and processes the data for use by the data analysis software, Data Sentry.
Data Sentry - Data Analysis Software
This powerful pc-based software utility has all the tools and functions necessary to obtain a complete picture of how efficiently the gas turbine is running, as well as identifying potential problems at an early stage.
|
|
| ... products without technical information |
| |
With their constant processing design, CSC type continuous screen changers are able to meet the most stringent quality requirements for melt filtration. The type HSC, FSC and DSC discontinuous screen changers are a simple, robust, and affordable alternative for applications where a short interruption in the melt flow is possible for making screen changes.
The DV continuous divert and dump valve was developed specifically to meet the requirements of underwater pelletizing. It features a unique design that provides bump-less changeovers and eliminates the possibility of a deadhead condition.
|
|
Xaloy Screen Changers
Xaloy, the worldwide leader in melt filtration, offers a broad of range screen changers engineered for reliability, productivity and cost-effectiveness in virtually any extrusion processing environment.
* Leak-free operation
* Easy maintenance
* Simple, safe operation
* Maximum throughput
* Minimum pressure drop
Different types of Xaloy changers are available to fill your cost-performance need:
Manual changers: EM series. Our simplest, lowest-cost changers.
Pneumatic changers: XP series. Use the plant’s air supply to index the slide plate.
Hydraulic changers: EH series. Fast hydraulic actuation allows filter changes without shutting down the extruder.
Continuous changers: DBC series. Automatically maintain filter performance without production interruption.
High-capacity changers: SPC series. Can filter polymer at rates from 6,000 to 60,000 lb/h (approx 2700 to 27,000 kg/h) or more.
|
|
As the yougest generation among JCtimes group, stress on development and application on extrusion related equipment market, keep making innovation, has added great power to this team.
Features
It is designed with soft sealing system, matched with extruders of different specifications, it’s applicable to process with most polymers, at high output.
Screen changing time is within 2 seconds, and screening area covers from Φ30—Φ250.
With highly precise design, the screen has very good abrasive resisting, high pressure performance, so as to ensure large effective filtering area and enhance filtering effect.
It works well even under the high temperature of 300℃ and high pressure of 25—30Mpa.
Equipped with the secure cover, safty of the operator is completely guaranteed which well reflecting the ergonomic designing philosophy.
|
|
Double working position hydrualic screen changer of double –pillar type
Characteristic
Large filtering area, applicable to extrution product of a wide range of polymers.
Good sealing system,ensure perfect sealing effect.
air exhausting system is the most outstanding performance characteristic.
Standard type is 70-180mm. Other diameter can be tailor made.
Outside cover brings good appearance and safe operation .
|
|
Double- plate hydrulic screen changer with double working position
Double-plate type screen changer realizes non-stopping screen changing by alternating two plates.with double filtering areas, it is suitable for high output extrusion lines from 500kg/h to 2000g/h.
Characteristic
Double filter working alternatively, fast screen changing, easy production and maintainance.
Rapid screen changing time: within 2 sec.
Top and bottom copper ring close sealing on Main body and water sealing function, strengthens body sealing effect.
Ellipse shape filtering holes, larger filtering area.
High precision electronic ruler control,short changing time, hydraulic control system and secure operation.
Pressure range : 25—30Mpa, temperature under 300℃, keep normal function
|
|
Separator screens are conveying nstallations using directional vibration to handle castings carefully and separate them from loose sand / lumps at the same time. The standard use of these machines is continuous operation for serial products. With this facilitiy the sand shake out is recycled in a downstream treatment plant and returned to the process.
Features
- High wear-resistance
- Rugged design
- Low overall height
- Long service life
Benefits
- Low operating costs
- Small footprint
- High operational reliability
- Long service life
- Good value for money
|
|
|
These devices have been developed specially for monitoring active electric power, the output torque can be determined very accurately. They are used in mills, stone crushers, conveyors and other application where blocking can occur.
|
|
Hall-effect sensors
Hall-effect sensors are suitable for proximity rotational speed recording on gears with a small module and high resolution. The various models can be used in a wide range of applications, even under extreme conditions. SH type rotational speed sensors are used in a wide variety of applications in mechanical engineering, vehicles and mobile working machines, as well as in hydraulic drives.
The sensor detects the movement of ferromagnetic structures such as gears using the change in the magnetic flux. The sensor is biased using a permanent magnet. Teeth and gaps which moves past the sensor affect the magnetic field in different ways. This changes the Hall voltage on a hall-effect sensor.
This means the changes to the magnetic field can be converted to electrical values, and then filtered and processed. The output signal of the sensor is a square wave voltage which reflects the change in the magnetic field.
|
|
DZ 210: Simple Monitor for Standstill and Direction of Rotation
Simple monitor for control of clockwise or
anti-clockwise rotation and standstill
Versatile impulse inputs for operation with all common
incremental encoders and sensors
High maximum input frequency (500 kHz) and very fast
response time (1 kHz)
Two output relays (dry change-over) and
two fast-responding transistor outputs
|
|
Fast response to the variable, with display, analog output, contact alarms, and data interface. 2 incorporated measuring channels, to compute their ratio, difference, percentage difference (draw and shrinkage in paper and textiles), monitoring speed synchronism. Programmable adaptation to the application data, of the analog span, and of the alarms performance. Optional data bus o RS 232 or PROFIBUS. Design optional for snap-on-track, or panel mount, or 19 inch rack.
Specific versions are available to handle speed and direction output from our corresponding sensors, actuating relays with programmable response characteristics.
|
|
testo 470, rpm measuring instrument set: Instrument with SoftCase (protective case) in transport case, incl. adapter, probe tip, surface speed disc, reflectors, batteries and calibration protocol
testo 470, the ideal combination of optical and mechanical rpm measurement. An optical measurement becomes a mechanical measurement by simply attaching an adapter for probe tip or surface speed disc.
* Easy one-hand operation
* Measurement of rpm, speeds and lengths
* "Low Batt" warning
* Robust design with SoftCase (protective case)
* Storage of mean/max./min. values, last reading
* Measurement distance up to 600 mm (optical measurement)
|
|
| ... products without technical information |
| |
High-speed printing with superb accuracy :
Printing accuracy of less than 20 µm
Printing cycle time 7.0 seconds + printing time
2-camera automatic calibration
Easy operation
Within 2 minutes production changeover
Small footprint of 1,1 x 1,285 m
|
|
Close tolerance screen and stencil printing is usually associated with smaller-format substrates and print areas such as used in micro-electronics. In recent times, however, there is a growing need for larger-format applications as used in the medical, solar, display, and flexible electronic circuitry fields.
MTS® Series printers allow better process stability for large areas--in all axes, and with superior results based on your screen making capabilities. Preco’s X-Y-theta camera registration can be equipped with a variety of fiducial recognition techniques, to provide unique repeatable accuracy for all formats.
|
|
|
|
|
|
Function
Large board dimensions, different conveyor modes tor different throughput rates and a new high-speed inspection function - these
are the key product features of the X6. Printing tables with different designs tor different versions allow solder paste printing on partly assembled circuit boards (i.e. components mounted on the opposite side) with formats ot up to 610 x 550 mm. The choice
of the right circuit-board conveying system is determined by the required throughput rate. The single-track system conveys the
circuit-board safely through the printer and requires a handling time of only 12 seconds.
The single-conveyor HSP version with its tripartite conveyor belt shortens this handling time to less than 7 seconds.
The new high-end version of the EKRA 2 1/2-D postprint inspection delivers several images from up to 4 inspection stations every
second, thanks to the use of the latest linear engine drive technology. The use of a larger camera sensor increases the field
of view to 20 x 16 mm without any loss in resolution, ensuring that the 2 1/2-D postprint inspection system delivers consistently better results than the so-called line-scanner solutions and allowing
a thorough analysis of the solder paste printing quality on the basis ot its images.
Standard version with adjustable squeegee pressure and as a VIP head with weight compensation and fine-tuning for the squeegee
power. The automatic stencil-cleaning function also features in the basic version.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
