|
|
|
|
|
|
Performance at small prices
***The New Series of Indicators and PID Controllers of B B Thermo-Technik***
B B Thermo-Technik presents a new series of low cost indicators and digital temperature or universal controllers.
Available from 77,- € on, the PID 1/16 DIN temperature controller was designed also for non-experienced users: combining extreme simplicity in operation with high performance only found in expensive high end controllers. It accepts most thermocouples and Pt100 RTD, features a relay and pulse output for driving solid state relays.
The Universal Controller series accepts thermocouples J, K, T, E, N, R, S, resistance thermometer Pt100, V, mV, mA. They hold in one single instrument all the major features that are needed for the vast majority of industrial processes. Both input and output are selected through the front keyboard without hardware change.
The low cost temperature indicators available from 69,- € are easy-to-use also ideal for non-experienced users. Much performance at an acceptable price! Universal indicators at reasonable prices are also available!
Further information will be found at our Temperature Shop:
www.temperature-shop.eu
|
|
The Temperature Relay TR-42 has been designed for continuous monitoring of the temperature, the cooling fan's control and overheat protection for resin or air insulated three-phase transformers.
Thermal detectors PT100 DIN 43760, three of them located inside the transformer coils and the fourth at the core, detect the temperature.
The TR-42 relay is microprocessor-based equipment designed to satisfy all control requirements and guarantee high reliability.
The TR-42 perform the following functions:
Measurement:
* Coils and core transformer temperatures, automatically each 5 sec or manually.
* Highest temperature indication and storage.
Signaling and programming:
* 7 segment display and led indication.
* Simplified programming through frontal push buttons.
* Display and non volatile storage of: alarm temperature, trip temperature, fan on, start and stop fan temperature, highest RTD temperature, baud rate of serial transmission, and assigned relay address.
|
|
|
Fuzzy logic is an essential feature of this versatile controller. Although PID control is widely accepted by industry, it is difficult for it to work efficiently in some systems - for example: systems of second order, long lag-time systems, and systems with various set points and loads, etc. This fuzzy logic temperature controller will enhance PID control. Fuzzy logic will adjust PID values indirectly to make the manipulation output value (MV) adjust flexibly and quickly adapt to various processes. This enables a process to reach its predetermined set point in the shortest time with minimum overshoot during tuning or external disturbance.
|
|
KT4 - small standard type
- 1/16 DIN size temperature controller
- Size: 48 x 48 x 95mm (WxHxD)
- Panel-mounted type
- IP66
- 2nd optional alarm output
- Heating and cooling control with 2nd optional control output (non-contact voltage output)
|
|
| ... products without technical information |
| |
The TFT industrial monitor is a modern concept to replace old or defective CRT's and TFT's mounted in control units CNC 3460 / CNC 3480 and CNC 3360 by Philips.
All Units are Made in Germany, using only high quality components. A mechanic housing, similar to the original Unit, makes it easy to exchange in just a few minutes.
The new display is plug&play 100% compatible to Philips equipment.
TFT-display sizes:
* 12,1" TFT as a replacement for 14" CRT color
|
|
The TFT industrial monitor is a modern concept to replace old or defective CRT's and TFT's mounted in Sinumerik control units 810 GA / GA.2, S3, 805, 805M, 820, 820M GA.3, 820T GA.3, 840C, 840D, 840D-PPC, 850, 880, 880G by Siemens (compatible to INDEX C200).
All Units are Made in Germany, using only high quality components. A mechanic housing, similar to the original Unit, makes it easy to exchange in just a few minutes.
The new display is plug&play 100% compatible to Siemens Sinumerik equipment.
TFT-Display sizes:
* 8,4" TFT as a replacement for 9" CRT or 10" CRT
> 3N/MEA1507529
> 6FC3888-5MC
* 10,4" TFT as a replacement for 12" CRT monochrome or color
> 6FC4600-0AR04
> 6FC3561-1AC-Z
> 6FC3801-0AC-Z
> 6FC3261-1AC-Z
> 6FC3988-7AM20
> 6FC3986-3AU (RGB)
> MAM32-12
* 10,4" TFT as a replacement for 14" CRT color
> 6FC5147-0AA17-0AA1
* 10,4" TFT as a replacement for 10,4" display
> 6FC5247-0AA16-0AA1
> LTM10C209A
* 12,1" TFT as a replacement for 14" CRT Monitor color
|
|
The TFT industrial monitor is a modern concept to replace old or defective CRT's and TFT's mounted in control units of different manufactures, e.g. Siemens, Gildemeister, Heidenhain, Fanuc, Philips, Deckel, MAHO, DMG, several injection molding machines, further CNC control units...
All Units are Made in Germany, using only high quality components. A mechanic housing, similar to the original Unit, makes it easy to exchange in just a few minutes.
Sizes from 6.4" up to 21" are available.
|
|
Control line - Summary TFT replacement monitors
Replacement monitors for your CNC or SPS control system which have been already adjusted.
|
|
|
|
|
|
CRT monochrom and color, 12-24 VDC, 110-230 VAC, Dimensions: 5 ", 6 ", 7 ", 8 ", 9 ", 10 ", 12 ", 14 ", 15 ", 17 " and 19 "
Connectors: dish 10 pine (printed circuit), DB9, DIN, BNC, HD15, Honda-Fanuc, sinumerik 10-16 flat, NUM 720,750,760,1020,1040,1050,1060.
Multisynchro: 15-48 Khz Interfaces Multichannel with connector HD15, DB9, BNC, DIN, flat, scart-peritel etc. analogical and TTL management of the synchro on green, separate or composite digital OSD LCD for replacement old monitors CRT 100% compatible PLUG&PLAY solution available from 6,4 " to 20 " - version open-frame, closed frame or rackable - VGA->>>UXGA, VIDEO, DVI - version possible kit - tactile flagstone in option
Knowledge on Fuji, Mitsubishi, Matsushita, Totoku, Hantarex, Cabel, Selti etc....
ABB
ACTED
AMAD
BOSCH DC 200 DC 220/CC300
HEDGES
DECKEL-MAHO
DELEM
FAGOR
FANUC
FERROMATIK
GILDEMEISTER
HEIDENHAIN TNC 223 (BE311) BE132B (BE232) TNC 355 (BE412) TNC 246,306,360 (BE212) TNC 406,407 (BC110B) TNC 410,415 (BC110B) TNC 425,426,430 (BC120) HELLER
LVD
MAZAK Mazatrol m2, T2, m3, Mazatrol T3, M32, T32
MORBIDELLI ESA
DARED
PHILIPS/GRUNDIG 432
SANDRETTO
SIEMENS/SINUMERIK Sinumerik S3, Sinumerik 805, Sinumerik 805M, Sinumerik 810, Sinumerik 820, Sinumerik 850, Sinumerik 880, Sinumerik 840C,
TRUMPF
Bosch DC 200, Bosch DC 220, Bosch DC 300
Z-BAVELLONI
ARBURG
BATTENFELD
BILLION
DEMAG
DK
ENGEL/KEBA
FERROMATIK KLOCKNER
KRAUSS-MAFFEI
NEGRI-BOSSI
NETSTAL
STORK
|
|
| ... products without technical information |
| |
|
|
|
|
The new Digital Indication and Control Instrument VarioFox from AFRISO is a compact, ready-to-connect universal measurement and control instrument with integrated sensor supply and 2 (also choice of 4) voltage-free switching outputs. The instrument is very easy to operate and to program due to its text-orientated menu guidance (German, English or French).
VarioFox features a measurement unit listing, where units can be freely edited, as well as a free scaling/calibration of start and end of scale display values (99.999 - 9,999) which allows for almost all possibly required parameter settings. For horizontal cylindrical and spherical tanks integrated calibration charts can be accessed. For non-linear vessels or specially fabricated tanks a customer- specific 24-point linearization is available. The highest and lowest operational values are memorized but can also be utilized as instrument-internal visual and audible alarms on request. An alarm mute/accept button on the front of the instrument requires the responsible operator to act and this in itself provides for additional operational safety.
The measuring instrument works off an AC 50-253 V or DC 20-253 V supply and integrates a sensor input (4-20 mA, 0-20 mA, 0-10 V) and two isolated separate analogue outputs (0/4-20 mA und 0-10 mA).
|
|
The FAGOR 8055i MC Turnkey Package is a pre-engineered CNC & Servo System Package.
Specifically designed as a low cost solution for upgrading or retrofitting small and mid-size Milling machines to a fully controllable very powerful CNC Milling machine.
Every Turnkey Package is built to your machine specifications, fully tested and ready for immediate integration to your machine upon arrival.
The CNC 8055i MC utilizes a Dual Operating System. The unique and very powerful operating system consists of 2 systems within 1 control.
Utilizing a 100% very easy to program Icon Key based conversational programming system or a Conventional ISO G-code programming system within the same control.
The Fagor “Icon Key” programming method greatly simplifies the programming process even compared to more conventional conversational systems. Graphic assist is utilized within all programming screens thus enabling “true” fill in the blank programming.
|
|
The DMP200 series consists of four universal input indicators offering unparalleled price and performance. The use of surface mount components and modern microprocessor technology has enabled powerful features to be packed into a standard 1/8 DIN case.
The DML300 series of digital panel indicators is designed specifically for use with LVDT transducers. The "Fast-Cal" feature provides a fast and simple means of calibrating an indicator to the transducer at any two stroke positions.
|
|
The DM- 100 Digital Load meter displays motor load. The DM-100 can be adjusted to read the motor load in :
- Percent 0 - 100%
- Horsepower
- kW or W
The input for motor load indication comes from the analog output of a Load Controls, Inc. Load Control or from a LCI Powel Cell power transducer
.
|
|
| ... products without technical information |
| |
|
The series A3 digital differential pressure controller is a patent pending microprocessor based pressure controller for positive, negative, and differential pressure as well as velocity and flow. The Series A3 differential pressure controller includes (2) 8A SPDT relays and an associated software package that allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user friendly menu on the LCD display or uploaded using an OptiLink™ programming key. The LCD also displays the exact setpoints or other user defined variables during normal operation. Furthermore, the menu structure can be customized by moving variables to different menu levels to accommodate many applications. Compared to other mechanical products, the Series A3 digital differential pressure controller has a significantly reduced depth, an improved look, and better performance at a lower price.
|
|
|
The series A4 digital differential pressure controller is a patent pending microprocessor based pressure controller for positive, negative, and differential pressure as well as velocity and flow. The Series A4 differential pressure controller includes (2) 8A SPDT relays and an associated software package that allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user friendly menu on the OLED display or uploaded using an OptiLink™ programming key. The OLED also displays the exact setpoints or other user defined variables during normal operation. Furthermore, the menu structure can be customized by moving variables to different menu levels to accommodate many applications. Compared to other mechanical products, the Series A4 digital differential pressure controller has a significantly reduced depth, an improved look, and better performance at a similar price.
|
|
P820
motor-controlled, for air, vacuum or water
of brass, 0 - 10 V or 24 V
G1/2 - G1, 0 - 1000 / 3500 l/min
|
|
%u2022 The FLOWTRONICD consists of a fast, direct-acting 2-port proportional valve, a pressure sensor
unit and digital control electronics.
%u2022 Especially designed for applications placing extreme dynamic demands on fl ow control.
%u2022 Control and maintenance of constant and even fl ow, irrespective of outside infl uences.
%u2022 Precise measurement of fl ow with two sensors.
%u2022 Adaptable to different applications due to the use of digital control electronics that can be
confi gured by PC over a USB interface.
%u2022 Auto-tune function and ASCO FlowCom PC software provide for quick and easy start-up.
%u2022 Diagnosis over integrated LEDs or the ASCO FlowCom PC software.
|
|
%u2022 The FLOWTRONICD consists of a fast, direct-acting 2-port proportional valve, a pressure sensor
unit and digital control electronics.
%u2022 Especially designed for applications placing extreme dynamic demands on fl ow control.
%u2022 Control and maintenance of constant and even fl ow, irrespective of outside infl uences.
%u2022 Precise measurement of fl ow with two sensors.
%u2022 Adaptable to different applications due to the use of digital control electronics that can be
confi gured by PC over a USB interface.
%u2022 Auto-tune function and ASCO FlowCom PC software provide for quick and easy start-up.
%u2022 Diagnosis over integrated LEDs or the ASCO FlowCom PC software.
|
|
Si825x
The Si825x family of programmable digital power controllers provides closed-loop feedback control, system protection and power management functions for switch mode power systems and motor control applications.
Features
Single-chip, flash-based digital controller
Dedicated DSP-based loop processor
50 MIPS flash system management processor
Comprehensive, low-cost development kit
5x5 mm 28QFN and 32LQFP packages
125 °C maximum operating temperature
Applications
DC-DC, AC-DC converters
PFC circuits
Motor control systems
Isolation
UPS system
Level shifting
Ground loop elimination
Isolated analog data acquisition
Operator interface controls
Plasma TVs
Ethernet/CAN networks
Isolated point-to-point communications
|
|
|
The new automatic voltage regulator model S125 has been designed to perform its duty even in the most difficult work condition, on new or old-fashion brushless excitation units equipped with a dinamo. This device belongs to the smallest AVR family available on the market, but it is the most powerful since it supplies 5 A current.
|
|
| ... products without technical information |
| |
|
The VS-626M5 is a highly reliable AC vector controlled inverter drive designed for controlling high speed, compact AC motors used in machine tool spindle drive applications. Vector controlled technology through the use of a digital signal processor and proprietary algorithms for speed, torque, and current control allows for minimum speed and torque variations during cutting. This impacts accuracy and surface finish of precision parts. 100% back-to-line power regeneration provides quick spindle deceleration times not limited by the ohmic value of externally mounted regeneration resistors. This allows for faster tool changes and increased machine productivity.
|
|
Industrial PC-TFT :
Industrial PC-TFT 5,7" and touch screen display
Data input via:
- Touchscreen
- online
- Network
- Memory stick
- Barcode scanner
- Optimisation program and waste piecemanagement
|
|
The flagship CS3318 is an eight-channel, high-voltage, digitally controlled analog volume control IC that is the benchmark for audio quality, showcasing 127 dB dynamic range.
The CS3318 operates from a ±9 V power supply, with 118 dB adjustable range from +22dB to -96dB, negligible distortion and inter-channel isolation. Plus, a 0.25 dB step size with zero-crossing detection and programmable time out ensures remarkably smooth control of volume adjustment. The CS3308 is a pin-compatible ±5 V version with a very high dynamic range of 123 dB.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
