|
|
ENR level controller
The ENR20 has one relay output (MIN/MAX contact). The ENR30 has also another independent contact .
Mounting on a 35 mm mounting rail
Dimensions : l=45 mm h=75mm p=105mm
ENR20
- level switching points : 2
- contacts : 1 changeover
- status indicators : 2 LEDs
- max. switched current : 6A
- switching delay : 0...10 s
- output voltage : 12...14V
- output current : 8mA
ENR30
- level switching points : 3
- contacts : 2 changeovers
- status indicators : 2 LEDs
- max. switched current : 6A
- switching delay : approx. 1 s
- output voltage : 12...14V
- output current : 8mA
|
|
|
The gwk series teco tt has been designed especially for special require-ments of this type that arise in operation with such high temperatures. The specific heat surface loading is designed to be such that thermal decomposi-tion of the heat carrying oil can be prevented without fail at normal flow rates. Built-in flow monitoring ensures that an alarm is given if the flow rate becomes too low. It is necessary to prevent oxygen from entering into the system in order to avoid damage to the heat carrying oil from oxidation. The closed circuit of the teco tt units have a supply of cold oil in expansion vessel, which can also be equipped with a nitrogen covering supply device on request.
|
|
SCOTC Oil tank to control
Description:
- Controller level/temperature.
- Tanks including opening of filling and air filter.
Advantages:
- Reduction of the obstruction of the tanks: 4 functions in 1!
- A simple adjustment of the points of commutation via the menu
- An analogical exit
- A protected control
- Reduction of the logistic costs, assembly and maintenance
Applications:
- Control of level/temperature of hydraulic tanks.
|
|
| ... products without technical information |
| |
Bunded Waste Oil Tanks
Tuffa 1400VBWOS
Capacity: 1400 litres / 300 gallons
Dimensions: 1576mm (DIA) x 1800mm (H)
Product Description - Complete with:
* Tundish
* Filter
* Vent
* Easy access yellow flip lid
A Tuffa Waste Oil Tank would benefit businesses in the motoring industry such as Garages, Bus Depots, Haulage companies etc. It will ensure that the waste oil is stored safely and securely at a reasonable price.
The Tuffa bunded waste oil tanks are designed with pollution control in mind and are manufactured to all appropriate current legislations with in the oil industry, pending correct installation. bunded waste oil tanks come in a range of sizes
|
|
|
|
|
|
These containers of recovery of waste oils of the SEMI type industrial Modhuile are equipped with a double tank of retention out of polyethylene, in conformity with standard XP-H-96618 and the decree of April 7th, 1997. Capacities: 600,1350 or 2500 liters. Broad funnel with boltable lid to pour waste oils. When the collector is full it is enough with the oil pick-up to remove the grid of filtration of the funnel and, to plunge its nozzle of aspiration to carry out draining. Finally it are equipped out of standard with a gauge with level and, of an electronic system of detection of escapes between the 2 tanks.
IN OPTION: Connection fireman DNN 50 if you do not want us that the oil pick-up uses the funnel of discharge to carry out draining collector as it is full.
This polyethylene collector answers perfectly a use in saline medium or corosifs. Simple of use, Their respective capacities of 600,1350, and 2500 liters meet the needs for each one. The gauge of level will enable you to know when the collector is full and will avoid any inopportune overflow. Its double tank of retention, in conformity with the regulations in force avoids any accidental pollution Enfin its system of detection ant-escape between the 2 walls will inform you in the event of escape of the receiving tank. Modhuile indistrielle of SEMI type fulfills the environmental requirements thus perfectly
|
|
|
|
|
|
Container of worn engine oil recovery standard M 1200 cd. This container is équipéd' a double tank of retention in conformity with standard XP-H-96618 and with the decree of the 4/7/1997, Its low part out of steel or stainless with an oil storage capacity of 1200 liters and its high part out of polyethylene has a receptacle for the storage of the empty cans of 750 liters. These other characteristics: measure level, counter of discharge of great capacity, connection of pumping DNN 50 standardized for the draining of the collector, ring of levage.FABRICATION FRENCH
This worn oil collector offers an excellent report/ratio QUALITE/PRIX. Its gauge of level will enable you to see when the collector is full and, that will avoid any inopportune overflow thus. Its under anti-corrosion layer and its completion in partly low painting polyurethane protects it from the bad weather and UV; Its high part out of polyethylene is appropriate perfectly for a use in saline medium. Finally its double tank of retention in conformity with standard XP-H-96618 and the decree of the 4/7/1997 avoids any inopportune pollution in the case or the receiving tank would be bored. He fulfills the environmental requirements thus perfectly
|
|
|
|
|
|
Container of worn engine oil recovery standard R1000 or R 1500. These containers entirely metal are equipped with a double tank of retention in conformity with standard XP-H-96618 and with the decree of the 4/7/1997, they have a respective oil storage capacity of 1250 or 1700 liters and 800 and 1250 liters for the storage of the empty cans. Another characteristics: measure level, counter of discharge of great capacity with shutter of protection and automatic system of locking per float when the collector is full, connection of pumping DNN 50 standardized for the draining of the collector. FRENCH MANUFACTURE
This worn oil collector, entirely metal, is robust and, an increased protection against the fire and vandalism offers. Its broad counter of discharge is equipped with a rain-proof shutter and an automatic system of locking when the collector is full: that avoids any inopportune overflow thus. Its under anti-corrosion layer and its completion in painting polyurethane protects it from the bad weather and of UV and, thus guarantees to him an optimal lifespan. Finally its double tank of retention in conformity with standard XP-H-96618 and the decree of the 4/7/1997 avoids any inopportune pollution in the case or the receiving tank would be bored. He fulfills the environmental requirements thus perfectly
|
|
|
|
|
|
This container of recovery of waste oils or the effluents (gray water or black water) with double tank of retention, out of polyethylene, is in conformity with standard XP-H-96118 and the decree of the 4/7/1997. With capacity 2500 and 5000 liters, it is equipped with an electric or manual pump and a nozzle of aspiration.
Other characteristics: trap door of access to the boltable pump, measures level, electronic system of detection of the escapes between the two walls, indicator digital of level with remote sensing, Raccord FIREMAN DNN 50.
It at summer especially conceived for the marinas.
it makes it possible to directly aspire waste oils or effluents to the source. Its great capacity makes it possible to space the draining of the collector. Its system of sensing remote when the collector is full allows to the person in charge of management waste not to systematically on the spot check the level of filling of the collector.
Its polyethilene structure protects it perfectly from the saline air and corrosion.
|
|
| ... products without technical information |
| |
|
|
|
|
VACUUBRAND's aluminum design diaphragm pump is a perfect match for many applications in the laboratory and operations because it is oil-free and whisper quiet, and because it requires so little service. Diaphragms have especially long lives, and hermetically seal the drive space from the pumping chamber to protect mechanical parts from corrosion. The pumps achieve their distinctively high performance from high pumping chamber volume relative to the minimal dead space. Highly flexible FPM double diaphragms with fabric reinforcement guarantee an extremely long diaphragm lifetime. The pumps operate absolutely oil free and do not have any sliding components on the vapor side; in normal operation they are completely free of abrasion. Besides contributing to the long service intervals, the lack of abrasion also eliminates most of the particulate impurities frequently generated on the vacuum side of scroll or piston pumps.
- innovative connections in the new NT models ensure very low leak rates for excellent flow rates under vacuum and long-term performance stability, even after thousands of hours of service.
- no abrasion, making it dust- and contamination-free
- long diaphragm and valve lifetimes: made of highly flexible FPM, with fabric-reinforced double diaphragms for improved long term stability
- new patented drive support system in NT pump models provide for uniquely quiet, low-vibration operation
|
|
|
The D7 vacuum pump/compressor provides a clean oil free vacuum and pressure source. Suitable for continous duty the D7 it ideal for use in medical and sampling applications where long term reliability is essential.
|
|
Oil free-Linear Diaphragm Pump enviro series
Contamination free blowing
ET series linear diaphragm pumps provide a clean oil free air source, wich is exceptionally quiet in operation and vibration free
|
|
For applications requiring extremely quiet, highly efficient operation and simple maintenance, our oilless linear pumps have found widespread use in the medical, industrial, chemical, environmental, and scientific industries.
Smooth air flow makes these models ideally suited for applications requiring consistent air flow
Electromagnetic oscillation eliminates sliding parts, minimizing power consumption, offering high efficiency and long-term continuous operation
Oilless operation means exhausted air is always clean and particle-free
Low noise level due to innovative design considerations in the pneumatic circuit and mechanical construction
|
|
Product Features
* Quiet Operation
* Low Power Consumption
* Low Starting Current
* Oil-less, Contamination-free exhaust air
* Long Life
* Automatic Pressure Limitation
* C.E. Compliant and U.L. listed Models
* U.L. Outdoor Rating on HP Series
* Easy to Service
* Custom OEM Models
* Thermal Protection
* Aerobic Wastewater Treatment
* Aquaculture Aeration
|
|
To measure various climate and processes values with a handheld, user-friendly instrument requires extraordinary measurement technology. The handheld meter of the OMNIPORT 20 series meets these multiple demands.
The selection of the appropriate sensing probe and accordingly the configuration of the handheld meter allow for displaying the following values with the highest accuracy:
relative humidity RH
temperatur T
dew point temperature Td
absolute humidity dv
mixing ratio r
air velocity v
water activity (in oil) aw
water content (in oil) x
The robust housing of the OMNIPORT 20 allows usage in harsh industrial environments.The readability of the large illuminated display is excellent. The easy to understand menu and the practical thumbwheel navigation offer outstanding comfort.
An optional carrying case can accommodate the display unit, up to 5 sensing probes as well as accessories such as cables and calibration kits.
|
|
Vaisala HUMICAP® Hand-Held Moisture and Temperature Meter for Oil MM70 enables reliable detection of moisture in oil. It is ideal for the preventive maintenance of oil-filled systems. The brobe can be inserted directly into the process pipe through a ball valve - without draining the system. The measurement is independent of oil type, age and temperature.
The MM70 features the Vaisala HUMICAP® Sensor which is known for its excellent pressure, temperature and chemical tolerance.
|
|
The HMP228 is a fast, reliable and accurate on-line detection system for water in oil.
Moisture measurements from lubrication oil can significantly cut maintenance costs and prolong machine lifetime. The HMP228 measures water activity and temperature from oil. In connection with oil, water activity measurement offers several advantages compared to the traditionally measured variable, parts per million (ppm). Water activity indicates directly whether there is risk for free water formation. The measurement is independent of the type, aging or temperature of the oil.
|
|
The MS100 offers a compact solution for permanent control in real time of the level of contamination of water in the hydraulic systems and of lubrication used in all industry.
* For the systems using of synthetic oils of oil/, hydraulic and of lubrication.
* Versions with the phosphate ester can also be specified.
* Be only 106 mm long and 50 mms in diameter.
* Conceived for a maximum operational pressure of 420 bar.
Advantages: A useful measurement which offers a method of calculation simple and quantitative of the contents of moisture in the hydraulic systems or lubrication.
* Provides results in real-time, precis and repetitive in the form of percentage of saturation out of water.
* Utmost precision of detection.
* Allows to carry out a preventive maintenance in real time and to take corrective measures.
Applications: Industry of paper, systems hydraulic in the shipbuildings, transmission and distribution of power, recycling of oil, hydraulic systems industrial.
|
|
| ... products without technical information |
| |
MILL-RIGHT® N, ES and V Oil Seals
Benefits
* Breakthrough anti-abrasion and anti-wear properties for extended service life
* Improved chemical resistance through the entire range of elastomers
* Available in all elastomeric KLOZURE® Oil Seal designs
Industries Served
* Mining
* Primary Metals
* Pulp & Paper
* Original Equipment Manufacturers
* Chemical Processing
* Food & Pharmaceutical
* Hydrocarbon Processing
* General Industry
* Aggregate
|
|
- Engine sealing for rotating shaft
- Flange -mounted engine seal for rotating shaft
- Detection of the crankshaft angular position for engine control
- Detection of the speed and position of an actuator
- Oil seals of injection pump connection elements
- Casing static seal
- Bonded pistons with low coefficient of friction for automatic gearboxes (AT + CVT)
- Seal for the gearbox rotating shaft
- Speed and/or position detection for gearboxes
- Bearing seal with integrated friction track
- Bearing seal with integrated friction + magnetic track
- Magnetic pulse ring to detect the wheel speed
- Magnetic target for detection of the angular position of the steering wheel
|
|
Oil seals
Available in all types and materials, in inch and metric sizes. Available in NBR and Viton® for shaft diameters of 4 to 1500 mm. Standard stock of 5000 different items.
V-rings
In addition to the standard rubber compounds, special quality products can be supplied from stock.
Hydraulic seals
The range includes rod and piston seals, dirt wipers and guide rings. Available in PUR (polyurethane), fabric-reinforced NBR and special PTFE compounds.
|
|
| ... products without technical information |
| |
|
CHO, or CHU Hung or seal co. Ltd have been producnig oil seals since 1988, and have now over 20,000 tooled parts covering over 700 styles. CHO supply oil seals to both OEM's and aftermarket customers all over the world from standard type seals to custom designed seals such as cassette seals and PTFE seals.
|
|
|
|
see the results for the following category : 
