|
|
|
|
|
|
2704 and 2704f High Performance Multi-Loop Controller and Programmer with Graphical User Interface
The world's most advanced 1/4 DIN controller combining unprecedented control performance with ease of set-up. The 2704 is a 1/4 DIN plug-in high stability temperature and process controller designed to be used in demanding applications where extensive process information is required at the local control panel. It has a high visibility graphical user interface with a bright 120 x 160 pixel dot matrix display of process information. It employs universal inputs (TC, RTD, DC) with INSTANT ACCURACY™. Direct connection of Zirconia probes is also supported for carbon potential control in atmospheric combustion applications. The advanced control algorithm and gain scheduling gives straight line control, even in difficult non-linear applications and automatic tuning simplifies commissioning.
THE 2704 IS IDEAL FOR
- One, Two or Three Control Loops - PID, Ratio, Override and Cascade Types
- High Stability, Precision and Functionality
- All Features of the 2604/2604f
- Bright Graphical Front Panel
- Semiconductors, Autoclaves, Vacuum & Glass Furnaces, Environmental Chambers, Ceramic Kilns
- Pre-Configured Melt Pressure, Carbon Potential, Vacuum Control Applications
NEW FEATURES
- Ethernet modbus/TCP
- iTools Graphical Wiring
- Dual DC Output Module
- High Resolution Retransmission Module
- User Configurable Modbus Map
- Math, Logic, Timer, RTC Functions
- Setpoint Programmer
- Modbus Master Communications
- Modbus Indirection Tables
- Faster Control Loop
- Manual Power Up Mode
- Support for Barber Colman Zirconia Probe
|
|
Temperature Controller - Series 32DZ
1/32 DIN, Self-Tune, Fuzzy Logic
Temperature Controller - Series 1400
1/16 DIN, Analog Setpoint, Compact, Low Cost
Temperature Controller - Series 1500
1/16 DIN, Self-Tune
Temperature/Limit Controller - Series 16L
1/16 DIN, FM Approved
Temperature Controller - Series 16C
1/16 DIN, Auto-Tuning
Temperature Controller - Series 8500
1/8 DIN, Self-Tune
|
|
INHECO Single TEC Control STC
INHECO has launched the STC, a compact high precision controller for managing single INHECO CPAC or shaker devices. The STC can be equipped optionally with slots for CPACs or shakers. The slots can be exchanged easily giving maximum flexibility. The STC can be operated manually using the touch screen display or through the USB interface. The soft- and firmware of the controller allows programming of complex temperature and shaking sequences. The STC uses basically the same firmware as its sister Multi TEC Control (MTC), so no additional integration work is required. Both STC and MTC are prepared for use in customer IVD applications.
Together with the MTC, the STC completes the replacement of the current controller TEC Control 96, which will be phased out by early 2010.
|
|
Examples:
-JUMO dTRON 304/308/316 Compact controller with program function, bezel size 48mm x 48mm, 48mm x 96mm, 96mm x 48mm and 96mm x 96mm (70.3041):
Max. two programmable analog inputs
Four programmable setpoints, two parameter sets
Program function with 8 segments, or ramp function
Math and logic module
4 limit comparators
Two timer functions
Two self-optimization procedures
Fast, user-friendly configuration through the setup program with program editor
RS422/485 interface
Profibus-DP interface
cUL/UL approval applied for
-JUMO IMAGO 500 Universal profile controllers/generators, bezel size 144 x 130mm (70.3590):
Brilliant 5" color graphics display, with 27 colors
Freely configurable screen templates
Up to 8 controller channels
50 programs, with 1000 segments under dynamic management
16 limit comparators
Modular hardware design
Recording function
Up to 4 cascade controllers
Profibus-DP interface
Math and logic functions
Teleservice via external modem
Setup program and program editor
|
|
LT450 Series (48mm X 96mm) Digital Indicating Controllers
LT470 Series (96mm X 96mm) Digital Indicating Controllers
Models LT450 and LT470 digital indicating controllers feature all functions, which are necessary for various control applications, including newly developed PID algorithms and a learning type overshoot suppression function "JyroNavi".
|
|
Complete range of controllers adapted to most of the industrial application
Quick and exact operation as result of PID action improved with FUZZY logic
It permits the calculation of the most efficient parameters thanks to the AUTOTUNING function ModBus RS485 Communication
|
|
We cooperate with innovative companies, which also realize custom-made control systems! Send us your inquiry, if you cannot find "your" device in the catalog - also controllers for other types of heaters!
Application:
Two-step controllers, controllers for heating and cooling devices in rooms (industrial sector), switchgear and control rooms, containers, cabinets, etc. Liquid or gaseous media.
|
|
|
A full range of controllers with universal input circuit and multiple alarms to suit any application. A selection of profile controllers complete the available functions.
|
|
Infodream make enterprise level manufacturing information systems which allow you to utilise your valuable production data to improve productivity & reduce waste.
SPC Vision is a real time Data Acquisition and SPC Software system for collecting, analysing, reporting and managing shopfloor data across the complete business enterprise.
One of the key benefits SPC Vision is its ability to collect and analyse data in real time. This allows for pro-active process control resulting in defect prevention rather than detection.
Data can be automatically collected from all the factory systems and measurement instrumentation and all the data is managed in a central database.
Early warning of process shifts and changes is highlighted by automatically generated processes alarms which can be communicated using a number of methods including email. Additionally SPC Vision can be integrated into the manufacturing system forming a closed loop process control system.
|
|
|
|
|
|
The InControl 7.11 real-time open architecture control component that allows you to design, create, test and run application programs for controlling your process - faster than ever before. The software is based on Microsoft® Windows operating systems.
InControl software provides a more capable and often lower-cost alternative to PLCs. In addition to being able to run on standard, open PC operating systems, InControl software also offers a more robust control package, vastly superior open connectivity and sophisticated logic capabilities to handle complex discrete and batch processes. InControl software also offers greater overall capacity compared to micro-PLCs and lower cost-per-point than midsize PLCs.
When used in conjunction with other Wonderware products, InControl software provides advanced scripting and a real-time information application engine, plus powerful communication capabilities for easy information integration.
Key Benefits
- EC61131-3 Relay Ladder Logic (RLL)
- Sequential Function Chart (SFC) editor
- Structured Text (ST) editor
- Invaluable for process simulation
Key Capabilities
- Soft Control - PLC Logic
- OPC data access client
- I/O server capability
|
|
|
|
|
|
The InControl 7.11 real-time open architecture control component that allows you to design, create, test and run application programs for controlling your process - faster than ever before. The software is based on Microsoft® Windows operating systems.
InControl software provides a more capable and often lower-cost alternative to PLCs. In addition to being able to run on standard, open PC operating systems, InControl software also offers a more robust control package, vastly superior open connectivity and sophisticated logic capabilities to handle complex discrete and batch processes. InControl software also offers greater overall capacity compared to micro-PLCs and lower cost-per-point than midsize PLCs.
When used in conjunction with other Wonderware products, InControl software provides advanced scripting and a real-time information application engine, plus powerful communication capabilities for easy information integration.
Key Benefits
- EC61131-3 Relay Ladder Logic (RLL)
- Sequential Function Chart (SFC) editor
- Structured Text (ST) editor
- Invaluable for process simulation
Key Capabilities
- Soft Control - PLC Logic
- OPC data access client
- I/O server capability
|
|
|
IMO, a leader in factory automation, presents its range of SCADA and OPC enabled software products. Create your own PC based process control application to complete your IMO solution!
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
|
|
With Q-DAS' popular procella SPC software, measurement and inspection data can be quickly acquired either by manual input or on-line, via the serial interface of the measuring device. On-line visualization of the acquired data enables timely detection of trends and out-of-control conditions.
The user is therefore in an excellent position to initiate timely corrective action. Data are checked against individually defined alarm thresholds (violation of tolerance or control limits) as soon as they are collected. If an alarm occurs, the operator is required to acknowledge the alarm. Actions taken, events and causes can be documented.
The user can be required to enter supplementary data (cavity, machine, batch, etc.), which allows for traceability throughout, and for object-related analysis of relevant information.
In advanced enterprise solutions, integration via an IDI interface connection with SAP/R3 QM makes it possible to load inspection lots generated by SAP into procella for data acquisition. Once the examination is completed, the acquired data are transferred back to SAP. In this way, users can benefit both from the flexibility of procella in terms of data acquisition and on-line visualization, and the advantages of a centralized umbrella system such as SAP.
|
|
|
|
|
|
ProFicient is the latest version of our No. 1 ranked SPC software with new features and enhancements.
Making informed business decisions in real-time can be challenging. Thorough data analysis often occurs after products have already been produced, making it impossible to control quality during the manufacturing process. ProFicient™ is InfinityQS' industry-leading Statistical Process Control (SPC) software. It automates data collection and analysis on the plant floor, helping quality professionals make intelligent decisions to improve their manufacturing processes in real-time, before defects occur.
Robust Functionality
InfinityQS ProFicient suite of software provides extensive functionality, allowing you to chart and analyze data in a way that's most meaningful to you. Unlike other charting applications, such as Microsoft Excel, ProFicient offers unlimited data mining and sorting, so that your reporting options are virtually endless.
+ Advanced Control Charting Tools
Process Event Handling and
Sophisticated Comparative Analysis
Full support for FDA's 21 CFR Part 11
Lot Acceptance Sampling
Easy to Integrate, Implement and Use
ProFicient software can smoothly integrate into any manufacturing environment. A single setup supports hundreds of parts and machine tools, simplifying deployment and system management.
Project Based
Ease of Integration
User-Friendly Interface
Simple Data Acquisition
Database Independence
|
|
Infodream make enterprise level manufacturing information systems which allow you to utilise your valuable production data to improve productivity & reduce waste.
SPC Vision is a real time Data Acquisition and SPC Software system for collecting, analysing, reporting and managing shopfloor data across the complete business enterprise.
Developed with our prestigious industrial partners, SPC Vision is a user friendly and flexible system, packed with rich, useful, and most importantly relevant functionality focused on the end goal of process improvement.
Key Features
Business Integration
Compliance & Traceability
Real Time Data Acquisition (Process and Product)
Real Time SPC, Quality Analysis & Process Supervision
Robust & Comfortable HMI
Industrial Integration
Reporting
|
|
Wonderware's QI Analyst 8.0 real-time SPC software can give your production team the quality information they need to adjust process parameters on the fly, which can decrease costs and improve product quality. Traditional off-line SPC systems use historical process data and don%u2019t allow real-time corrections of process excursions.
QI Analyst software is an important part of Wonderware's software solutions for Production and Performance Management. Its comprehensive, real-time SPC monitoring keep Wonderware customers informed regarding developing product-quality problems.
|
|
Wonderware's QI Analyst 8.0 real-time SPC software can give your production team the quality information they need to adjust process parameters on the fly, which can decrease costs and improve product quality. Traditional off-line SPC systems use historical process data and don%u2019t allow real-time corrections of process excursions.
QI Analyst software is an important part of Wonderware's software solutions for Production and Performance Management. Its comprehensive, real-time SPC monitoring keep Wonderware customers informed regarding developing product-quality problems.
|
|
| ... products without technical information |
| |
|
|
|
|
Infrared thermography is an effective approach to non-contact measuring of temperature distribution for a range of applications. To use this approach also in industrial process control, InfraTec offers INDU-SCAN as a modular test system based on thermographic cameras for a variety of performance ranges for stationary applications.
The thermographic camera is installed in the immediate proximity of the process to be monitored. To withstand unfavourable environmental conditions, the camera unit can be protected with a housing and an air purge unit. To cover large monitoring requirements, the camera can be mounted on a pan/tilt head. Using digital data output is an excellent pre-requisite for flawless and long-term stable processing of all pixel temperature values of the image. The image can be synchronised with the process rate. Over a connection line with varying length, if required a glass fibre transfer line, the data is passed on to the evaluation unit based on an industrial PC with a colour display.
|
|
|
|
|
|
|
Raytek announces the launch of its new GS110 Infrared Thermal Imaging System for Low Emissivity (Low-E) Glass. This system is specifically designed to monitor one-side coated flat glass during the tempering process. The GS110 scanns the topside of the glass and measures simultaneously the temperature on the uncoated side of the glass where the emissivity is both known and significantly higher. The measured data are transferred to the Windows-based GS110 software which is included in the GS110 system. The software automatically corrects the thermal image of the topside of the glass to provide a more accurate result. Further, the GS110 allows the user to set-up predefined recipes to accommodate frequent product changes typical in glass processes. OPC server functionality is included as an integral part of the proprietary software allowing for seamless integration of the data into other process control software packages. By quickly detecting thermal irregularities within the glass and identifying defective heating elements, the GS110 allows glass processors to improve product quality and uniformity, and to reduce scrap. The GS110 can be used for non-contact infrared temperature measurement in other secondary glass-processing applications such as bending, forming, and annealing.
|
|
Small size. Big performance.
The XC-EI50/CE and XC-EI30/CE incorporate the latest 1/2 type and 1/3 type Interline (IT) CCD with near-infrared sensitivity. Sony surface mount technology results in an ultra compact, rugged unit that provides high quality images.
IR lighting has become very popular in machine vision applications. When used with an IR LED illuminator, these cameras can capture clear images because of their sensitivity at infrared wavelengths. In addition the XC-EI Series camera modules have high overall sensitivity. This makes them suitable for low light environments as well as for special IR lighting conditions.
A single standard 12-pin connector provides control of input/output signals as well as power.
The recommended camera adaptor for these units is the compact and lightweight DC-700/CE.
|
|
Iron and Steel Slag Detection System
The definitive infrared thermal imaging system for steel slag monitoring
When liquid steel is tapped from a basic oxygen or electric arc furnace, it is advantageous to minimise the quantity of slag carried over into the ladle.
Previously this has been done by visual observation of the tapping stream or by the use of electromagnetic induction coils mounted onto the furnace. However, neither of these methods has proved to be entirely reliable.
The LAND thermal imaging Slag Detection System SDS has been developed using LAND’s expert knowledge of the application and over 60 years of experience in the steel industry to monitor and aid control of slag carry-over from one process to another.
|
|
|
Infrared vision systems are used worldwide in a variety of industries to monitor continuous processes. Infrared can easily detect thermal information on product quality and/or production efficiency that is difficult or impossible to capture using conventional means such as thermocouples or visible light cameras. The ThermoVision A40-M is an affordable and accurate temperature measurement system. It is the ideal choice for industrial and automation applications requiring accurate non-contact temperature measurement.
|
|
|
|
see the results for the following category : 
