|
|
Temperature Controller - Series 32DZ
1/32 DIN, Self-Tune, Fuzzy Logic
Temperature Controller - Series 1400
1/16 DIN, Analog Setpoint, Compact, Low Cost
Temperature Controller - Series 1500
1/16 DIN, Self-Tune
Temperature/Limit Controller - Series 16L
1/16 DIN, FM Approved
Temperature Controller - Series 16C
1/16 DIN, Auto-Tuning
Temperature Controller - Series 8500
1/8 DIN, Self-Tune
|
|
INHECO Single TEC Control STC
INHECO has launched the STC, a compact high precision controller for managing single INHECO CPAC or shaker devices. The STC can be equipped optionally with slots for CPACs or shakers. The slots can be exchanged easily giving maximum flexibility. The STC can be operated manually using the touch screen display or through the USB interface. The soft- and firmware of the controller allows programming of complex temperature and shaking sequences. The STC uses basically the same firmware as its sister Multi TEC Control (MTC), so no additional integration work is required. Both STC and MTC are prepared for use in customer IVD applications.
Together with the MTC, the STC completes the replacement of the current controller TEC Control 96, which will be phased out by early 2010.
|
|
Examples:
-JUMO dTRON 304/308/316 Compact controller with program function, bezel size 48mm x 48mm, 48mm x 96mm, 96mm x 48mm and 96mm x 96mm (70.3041):
Max. two programmable analog inputs
Four programmable setpoints, two parameter sets
Program function with 8 segments, or ramp function
Math and logic module
4 limit comparators
Two timer functions
Two self-optimization procedures
Fast, user-friendly configuration through the setup program with program editor
RS422/485 interface
Profibus-DP interface
cUL/UL approval applied for
-JUMO IMAGO 500 Universal profile controllers/generators, bezel size 144 x 130mm (70.3590):
Brilliant 5" color graphics display, with 27 colors
Freely configurable screen templates
Up to 8 controller channels
50 programs, with 1000 segments under dynamic management
16 limit comparators
Modular hardware design
Recording function
Up to 4 cascade controllers
Profibus-DP interface
Math and logic functions
Teleservice via external modem
Setup program and program editor
|
|
LT450 Series (48mm X 96mm) Digital Indicating Controllers
LT470 Series (96mm X 96mm) Digital Indicating Controllers
Models LT450 and LT470 digital indicating controllers feature all functions, which are necessary for various control applications, including newly developed PID algorithms and a learning type overshoot suppression function "JyroNavi".
|
|
Complete range of controllers adapted to most of the industrial application
Quick and exact operation as result of PID action improved with FUZZY logic
It permits the calculation of the most efficient parameters thanks to the AUTOTUNING function ModBus RS485 Communication
|
|
We cooperate with innovative companies, which also realize custom-made control systems! Send us your inquiry, if you cannot find "your" device in the catalog - also controllers for other types of heaters!
Application:
Two-step controllers, controllers for heating and cooling devices in rooms (industrial sector), switchgear and control rooms, containers, cabinets, etc. Liquid or gaseous media.
|
|
|
A full range of controllers with universal input circuit and multiple alarms to suit any application. A selection of profile controllers complete the available functions.
|
|
|
|
|
|
2704 and 2704f High Performance Multi-Loop Controller and Programmer with Graphical User Interface
The world's most advanced 1/4 DIN controller combining unprecedented control performance with ease of set-up. The 2704 is a 1/4 DIN plug-in high stability temperature and process controller designed to be used in demanding applications where extensive process information is required at the local control panel. It has a high visibility graphical user interface with a bright 120 x 160 pixel dot matrix display of process information. It employs universal inputs (TC, RTD, DC) with INSTANT ACCURACY™. Direct connection of Zirconia probes is also supported for carbon potential control in atmospheric combustion applications. The advanced control algorithm and gain scheduling gives straight line control, even in difficult non-linear applications and automatic tuning simplifies commissioning.
THE 2704 IS IDEAL FOR
- One, Two or Three Control Loops - PID, Ratio, Override and Cascade Types
- High Stability, Precision and Functionality
- All Features of the 2604/2604f
- Bright Graphical Front Panel
- Semiconductors, Autoclaves, Vacuum & Glass Furnaces, Environmental Chambers, Ceramic Kilns
- Pre-Configured Melt Pressure, Carbon Potential, Vacuum Control Applications
NEW FEATURES
- Ethernet modbus/TCP
- iTools Graphical Wiring
- Dual DC Output Module
- High Resolution Retransmission Module
- User Configurable Modbus Map
- Math, Logic, Timer, RTC Functions
- Setpoint Programmer
- Modbus Master Communications
- Modbus Indirection Tables
- Faster Control Loop
- Manual Power Up Mode
- Support for Barber Colman Zirconia Probe
|
|
Infodream make enterprise level manufacturing information systems which allow you to utilise your valuable production data to improve productivity & reduce waste.
SPC Vision is a real time Data Acquisition and SPC Software system for collecting, analysing, reporting and managing shopfloor data across the complete business enterprise.
One of the key benefits SPC Vision is its ability to collect and analyse data in real time. This allows for pro-active process control resulting in defect prevention rather than detection.
Data can be automatically collected from all the factory systems and measurement instrumentation and all the data is managed in a central database.
Early warning of process shifts and changes is highlighted by automatically generated processes alarms which can be communicated using a number of methods including email. Additionally SPC Vision can be integrated into the manufacturing system forming a closed loop process control system.
|
|
|
|
|
|
The InControl 7.11 real-time open architecture control component that allows you to design, create, test and run application programs for controlling your process - faster than ever before. The software is based on Microsoft® Windows operating systems.
InControl software provides a more capable and often lower-cost alternative to PLCs. In addition to being able to run on standard, open PC operating systems, InControl software also offers a more robust control package, vastly superior open connectivity and sophisticated logic capabilities to handle complex discrete and batch processes. InControl software also offers greater overall capacity compared to micro-PLCs and lower cost-per-point than midsize PLCs.
When used in conjunction with other Wonderware products, InControl software provides advanced scripting and a real-time information application engine, plus powerful communication capabilities for easy information integration.
Key Benefits
- EC61131-3 Relay Ladder Logic (RLL)
- Sequential Function Chart (SFC) editor
- Structured Text (ST) editor
- Invaluable for process simulation
Key Capabilities
- Soft Control - PLC Logic
- OPC data access client
- I/O server capability
|
|
|
|
|
|
The InControl 7.11 real-time open architecture control component that allows you to design, create, test and run application programs for controlling your process - faster than ever before. The software is based on Microsoft® Windows operating systems.
InControl software provides a more capable and often lower-cost alternative to PLCs. In addition to being able to run on standard, open PC operating systems, InControl software also offers a more robust control package, vastly superior open connectivity and sophisticated logic capabilities to handle complex discrete and batch processes. InControl software also offers greater overall capacity compared to micro-PLCs and lower cost-per-point than midsize PLCs.
When used in conjunction with other Wonderware products, InControl software provides advanced scripting and a real-time information application engine, plus powerful communication capabilities for easy information integration.
Key Benefits
- EC61131-3 Relay Ladder Logic (RLL)
- Sequential Function Chart (SFC) editor
- Structured Text (ST) editor
- Invaluable for process simulation
Key Capabilities
- Soft Control - PLC Logic
- OPC data access client
- I/O server capability
|
|
|
IMO, a leader in factory automation, presents its range of SCADA and OPC enabled software products. Create your own PC based process control application to complete your IMO solution!
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
