|
|
The powerful indicator N1500 offers among its universal input and the 2 relay outputs for the monitoring of the threshold values many other functions. The Min.- and Max.-values can be prompted with just a keystroke. Also there is a Hold and a Peak-Hold Function whose readouts can be deleted using either the function key or the digital input. The high tact frequency of 15 measurements/second (5 measurements/second when using linear input, thermocouples or Pt100) allows the N1500 indicator to monitor fast processes. It offers also the possibility to linearise the measurement signal when using non-linear input signals (mV, V, mA).
Features:
- Universal input
- Linearization of mV, V, mA signals
- 2 Relay outputs
- 6 Alarm features
- Voltage output 24 VDC for external 2-wire transmitter
- Memory for MAX and MIN values, hold and peak features
See more information in our shop:
***www.temperature-shop.de*** |
|
| ... products without technical information |
| |
The GammaRAE II-R is two instruments in one: it has the rapid response of a detector and the accurate dose measurement of a dosimeter. It is designed specifically to meet the needs of first responders.
This instrument contains two separate sensors. The Cesium Iodide (CsI) scintillator provides a fast, two-second response to radiological threats, while the energy-compensated PIN diode provides high dose rate range coverage and accurate dose measurements.
The GammaRAE II-R accumulates accurate total dose. Stored dosage data can be cumulative or reset for each use period. It alerts the wearer with a loud audible alarm, big, bright flashing LEDs, and a built-in vibration alarm. For stealth operations, law enforcement personnel can disable each alarm individually.
Immersible (IP67) design makes for reliable operation in wet environments and easy decontamination. IS certification permits operation in potentially flammable/explosive environments. |
|
| ... products without technical information |
| |
Application
Oil and petrol pose a great danger to groundwater and waste water.
WGA 01 monitors the level of the separated liquid in oil/petrol separators
and generates an alarm signal when it is necessary to empty
the separator. In addition, the maximum level in the separator can be
detected. This prevents overfilling caused by clogged outlets or other
circumstances. The unit prevents harmful substances from being
discharged into the mains drainage system.
Description
WGA 01 consists of an evaluation unit, a capacitance probe (WGAES4)
for detecting the layer level as well as an optional additional PTC
thermistor probe (WGA-R6) for detecting the maximum level (overflow
alarm). The evaluation unit is equipped with 2 relay outputs,
visual and audible alarms as well as test and re-set buttons. The WGAES4
probe is mounted at least 150 mm below the constant level of the
separator. As soon as the oil or petrol layer reaches the critical
level, the unit generates an alarm signal. By installing an additional
optional WGA-R6 probe above the constant level, the maximum permissible
level in the separator can also be detected. The evaluation
unit monitors the connected probes and signals short circuits or
cable breaks in the probe circuits. |
|
Level Monitoring
Level Measurement |
|
| ... products without technical information |
| |
Electromagnetic Inteference (EMI) causes equipment malfunction in many applications. EMI is an increasingly persistant problem anywhere sensitive electronics equipment is used.
Typical issues associated with EMI are equipment lock-ups, random equipment malfunction, data corruption, software and parametric errors along with many others.
|
|
Stop leaking your money!! AWS series water leak alarm provides an efficient and ecomonic way to prevent any possible damage or loss caused by leakage.
The AWS series water leak alarm equipped with LED and siren to inform you when any leakage occurred.
- Adjustable sensitivity level.
- Detecting loop provides efficient protection by warning alarm
- With water-proof and anti-insect
- Length of detecting line is adjustable upon request.
- Easy installation, with Wall mount & Rail-rack mount type for flexible applications
It is perfect for offices, storage room, data room, server room, monitoring center, pipes, or tanks. |
|
The PEX7250 Explosion Proof Alarm Annunciator offers a vast range of features and benefits normally reserved for use in safe area annunciators only. The heart of the system is our field proven Series 725 Alarm Annunciator which is available in 3 individual window sizes 30mm x 30mm, 30mm x 60mm or 60mm x 60mm. Reliability of the system is vastly improved over conventional systems with the use of ASIC's (Application Specific Integrated Circuits) for each pair of alarms, removing any reliance on common control cards. The standard enclosure is copper free cast alloy, finished in a light grey two-part epoxy paint, making it ideal for offshore applications.
Systems are available in a range of formats and sizes and are certified for use in Zone 1 hazardous areas. All systems are automatically covered by our standard 5 Year Warranty. |
|
Explosion Proof Alarm Annunciator from RTK Instruments
RTK Instruments’ PEX7250 Explosion Proof Alarm Annunciator, suitable for use in Zone 1 and Zone 2 hazardous areas, offers a vast range of features and benefits normally reserved for use in safe area annunciators only.
The heart of the system is RTK Instruments’ field-proven Series 725 Alarm Annunciator, which uses multi-redundant ASIC technology to greatly improve reliability compared with conventional systems. This high level of reliability is backed up by RTK Instruments’ 5 year warranty.
The PEX7250 Alarm Annunciator is available in a range of sizes and shapes from one to 56 points in a single enclosure, with a choice of three window sizes. Illumination is using high reliability, ultra-bright LEDs.
The standard enclosure is copper-free cast alloy and finished in a light grey two-part epoxy paint, making it ideal for offshore applications. A stainless steel enclosure is available as an option.
RTK Instruments is a leading global supplier of safe and hazardous area alarm, display and interface products and can provide specific application advice, as well as product recommendations and installation advice.
|
|
The RTK UC625 Alarm System, developed from the field proven P625 range of alarm annunciators, offers the latest in ASIC technology packed into an compact design for applications where panel space is at a premium.
However simple or complex your alarm requirement, the UC625 with compact packaging, ASIC Technology and "no master module" philosophy, will give the most cost-effective solution.
Programmable alarm sequence, signal duplicating relays, dual horn relays, LED display, proven ASIC technology and dual redundant universal power inputs make it ideal for all industry sectors.
|
|
A16B Alarm Annunciator(604 600)
• Programmable with PC or other control devices
• Easy transitions between hardware / software configurations
• 3 port 2.5kVAC isolation
• High efficiency indicator LED’s in front panel
• Low power consumption
• DIN 19235 standard compatible signal functioning
• Removable signal labels
• Wide operation temperature range
The A16B is programmable industrial 16 channel alarm annunciator with different signalization options and compatible with DIN19235 standards. A16B alarm inputs interrogated with 24/110 AC/DC voltage. High isolation is provided between input, output and power supply circuits for maximum safety. A16B is DIP switch configurable and also programmable via Windows based software which allows easy and flexible configuration of input and output characteristics. |
|
The Series 725 Alarm Annunciator provides the ideal solution to all your alarm system requirements. This innovative and unique design gives exceptional flexibility, reliability and programmability.
- Only 145mm deep
- Fully programmable with power applied and without having to remove lightboxes, backplanes or alarm cards
- Proven, ASIC-based technology: fewer components means higher reliability
- Ultra bright LED's available in a range of six colours
- Surpasses the EMC and LVD directives.
With a range of three window sizes, six colours and a choice of bulbs or ultra-bright LED illumination, a format and size will be available to match your exact requirements.
Each individual alarm way is fully programmable from the front, using the integral programming module. This allows for many different features giving thousands of possible combinations.
Numerous relay outputs are included as standard to connect to external equipment and individual repeat relays can be supplied as an option. The ASIC technology utilised in this design has a proven track record in a wide range of industries around the world.
|
|
LN1000 Intrinsically Safe Annunciator provides a unique solution for problems with hazardous area alarm indication. The annunciator provides a visual display of the alarm status including 'first-up' information and can be mounted in the hazardous area for the benefit of operators working in any Zone.
The lightweight stainless steel construction gives a compact and simple to install modular unit which can easily be expanded by the addition of extra alarm cards.
Maintenance can be carried out live without the necessity of 'gas checks' or prior shutdown. Unlike flameproof, purged and type 'N' systems, installation is simple and relatively low cost.
Power to the annunciator is supplied from the safe area through a single Intrinsically Safe interface for up to 32 channels.
With the addition of a number of ancillary devices a complete intrinsically safe alarm and control package can be provided |
|
The 9000TS is built on a rugged hardware platform suitable for the most severe of industrial environments this unit will provide true time-stamping of event occurence to a resolution of 1ms. Using the synchronisation input this can also be related to real time.
Combined with the integrated alarm annunciator features it is possible to build a system that will capture, record and display events and alarms both for immediate action on the plant and for later analysis to find the prime cause of the failure.
The system is sold with various different display and output options to suit the particular system and application.
|
|
The 725B Combined Annunciator and Event Recorder brings you the most advanced alarm monitoring system available today, offering you the best combination of reliability, flexibility and usability plus a low cost of ownership.
The 725B Annunciator uses CANBUS® communication technology coupled with RTK Instruments%u2019 unique multi-redundant (no single point of system failure) design. The 725B can be supplied as a stand alone Annunciator or with an integrated 1ms Event Recorder, allowing the user to analyse the exact sequence of events following a plant breakdown.
All alarm windows are illuminated by high reliability, ultra-bright white LEDs offering a maintenance-free solution. To reduce installation time and costs, the 725B can be supplied with integral, universal Power Supplies to connect directly to 85-264VAC or 88-360VDC.
The modular construction of the 725B Alarm Annunciator allows units to be assembled in almost any size and shape from one to 256 channels in a single housing with a choice of window sizes and colours.
Each alarm channel is fully programmable using the RTK supplied configuration utility and a standard USB programming port to connect directly to a PC or laptop. |
|
The DB5 intrinsically safe multitone sounder is ideally suited for use in areas of high ambient noise. Additionally, for extreme noise levels, they can be linked with the DA134 Xenon Beacons to combine audible and visual warnings. They are designed with a re-entrant configuration to combine compactness with maximum efficiency.
One of 26 tones can be selected using a 5-way DIL switch and by switching the incoming negative supply to a third terminal a second tone is sounded. The sounders have suitable low frequencies to conform to BS 5839: Part 1: 1988, making them ideal for fire alarm systems and other annunciator applications.
The IP65 enclosure enables the DB5 sounder to cope with the harsh environmental conditions found offshore as well as those of the onshore oil, gas and chemical industries. The tough construction enhances the reliability of the solid-state piezoelectric sounder. |
|
The RTK System 9000 Alarm Annunciator offers the latest in combined ASIC/micro-controller technology to provide an annunciator of unparalleled reliability and programmability. The system gives complete flexibility and total security at an unmatched price.
Total integrity is provided by the unique "no master module" principle, with the "no master" PSU and communications. The flexibility offered is also second to none, with easily configurable setup of hundreds of options including alarm sequence, time delays, relay operation, first-up grouping, functionality, communications etc. The range of displays to match the System 9000 is extensive, from the low cost Series 300 to flexible window size lamp arrays, mosaic mimic diagrams and hard wearing single piece mimics. |
|
Format DIN 144x144.
Automat for centralising technical faults with 12 high luminosity leds, PC parameter settings and text display.
A "top of the range" product with all the functions of the J3000 with all the flexibility of PC programming.
Many additional functions.
Application: All industries including "high risk". This product is preferable in situations requiring sophisticated or different, channel by channel settings.
Simple, user-friendly PC software supplied. Bus RS422/485 Modbus/Jbus.
Selections by input channels
Output scheduler
Scheduling and processing of alarms and indicators
Text display with History and settings menu
|
|
M1000 Alarm Monitor
- 10 channels with LED indication
- Supports both NO/NC contacts
- Paper label for alarm description
- Special indication of first alarm
- Programmable reset sequence
- Built-in siren relay
- RS232 based configuration
- RS485 MODBUS-RTU
- Certified for marine use
The SELCO M1000 is an Alarm Monitor capable of surveying the state of up to 10 potential free contacts.
The inputs of the M1000 can be used to monitor both normally open (NO) and normally closed (NC) contacts. Each contact can be sourced to a positive or negative reference. The M1000 includes a total of 10 inputs. Each input controls two bright red LEDs and an open collector output. A built-in relay provides audible alarm through control of an external siren. |
|
PANEL PC
Centralization of technical défault.
PANEL PC is a manager of technical alarm by integral BUS of the functionalities of operator assistance, of history with saving on card Compact Flash.
PANEL PC allows to manage 64 off-set modules of 12 alarms or the modules of inputs/outputs.
These modules can consist of panels of alarms J3000 or J3500. This makes it possible to preserve a treatment and a local indication (multi-task operation and degraded mode).
PANEL PC provides the following functions:
- Posting of alarms with payment to the screen.
- Operator Assistance or instruction for each way allowing to indicate to the operator the procedure according to alarm present.
- Visualization of the histories of the period.
- Visualisation of the one recorded period histories (10 000 possible pages).
- Impression with the wire of water with time-stamping.
- Carryforward of alarms at distances towards one or more subscribers by BUS (e.g.: the guard, engineering department, the control room).
- Possible remotely controllable outputs.
Use :
- Industry, Airport, Hospitals, Buildings. |
|
H0300 Event Logger
- Event logging
- Event relaying (repeater)
- On display memory log
- Printer log (hard copy)
- RS232 based configuration
- RS485 bus communication
The SELCO H300 Event Logger is a compact stand-alone unit capable of logging alarms and events from the M1000C Alarm Monitor, the M3000 Analogue Alarm Monitor, the M4780 and the H1500 Indicator Panels. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
