|
|
|
Quest Technologies offers a variety of thermal environmental and WBGT heat stress monitors. Datalogging heat stress monitors also available.
|
|
Large, well illuminated clear display, on-hand-operation by THUMB-WHEEL, rigid housing.
Portable Digital-Thermometer:
- C100: 1 channel, for Pt 100 (4-wire)
- C110: 2 channels, for 1 x Pt 100 and 1 x Thermocouple
- C120: 2 channels, for 2 x Thermocouple, indicating also differential temperature
Portable Indicator for Humidity:
- E200: Temperature and relative humidity, with rigid probe
- C200: Temperature and relative humidity, with rigid probe
- C210: Temperature and relative humidity, with flexible probe
Portable Digital-Manometer:
- C300: Barometer (barometric air pressure)
- C310: -500...+500 Pascal pressure+vacuum+differential
- C320: -100...+100 mbar pressure+vacuum+differential
- C330: -1000...+2000 mbar pressure+vacuum+differential
Portable Universal Indicators:
- C900: for all transmitter with standard signal output (e.g. 4...20 mA, with power supply for the transmitter)
e.g., together with our pressure transmitter, as Portable Digital Manometer, ranges 0...10 mbar up to 0...2000 bar available.
|
|
- Big keys for use with gloves
- Programmable characteristic curve end points (up to 24 control points)
MIN/MAX value detection,
- Display-Hold
- Auxiliary power output for measuring transducer/sensor
- Optocoupler or relay outputs
- Programmable limit values
- Optional: with serial interface
|
|
Enhanced indicator
Double input Indicator - Transmitter with four addressable alarms
1/8 DIN 96x48
Universal input for temperature sensors, mA, mV, Volt, IR, custom
High level second input 0/4...20 mA, 0/1...5, 0...10 V
3 digital inputs
3 SPST relays NO, 1 SPDT relay
0/4...20 mA retransmission output
4 addressable alarms with delay, latching and blocking functions
ISA sequence on alarms
Display of MIN, MAX value
Hold and temporized hold to display peaks
Dedicated alarm acknowledge key
5 digits 2 colors display with different combinations
RS 485 serial communications
Power supply 100...240 Vac, 24 Vac,dc
Transmitter power supply
IP65 front panel protection
|
|
|
This versitile range of cost effective panel indicators accept all common industrial sensors and have a complete range of output options. From the cost effective DM3400 range through to the highly advanced DM3600 which can customise its function to suit your specifc application, there's a panel meter to meet every requirement.
|
|
A portable sulphuric acid dewpoint monitor (Lancom 200) is designed specifically for plant requiring only periodic monitoring of the sulphuric acid dewpoint temperature for boiler efficiency checks, corrosion protection and evaluation of the effectiveness of corrective measures such as fuel additives and changes in the combustion conditions.
A continuous sulphuric acid dewpoint monitor (Model 440) is permanently installed in order to optimize combustion conditions by maintaining the temperature of the flue gas slightly above the sulphuric acid dewpoint temperature. It can continuously monitor the changes in boiler operation and provide a direct loop input to the boiler's own combustion control system.
|
|
|
The Tecal Accu-Temp is a good choice for use as a laboratory grade reference thermometer. It's available in a single or dual channel model, along with direct temperature readout in degrees F, C and ohms. Combine the Tecal Accu-Temp with one of our secondary standard PRT's for a high accuracy temperature measurement system. Don't rely on battery operated, low accuracy hand-held model PRT indicators for your critical temperature measurements.
|
|
Features:
- Compact 1/8 DIN size fits into standard industry panel cutouts.
- Large and super bright red 0.56" LED display
- Safety screw terminals for power and signal inputs.
- Type K, J, T and RTD available
|
|
The powerful indicator N1500 offers among its universal input and the 2 relay outputs for the monitoring of the threshold values many other functions. The Min.- and Max.-values can be prompted with just a keystroke. Also there is a Hold and a Peak-Hold Function whose readouts can be deleted using either the function key or the digital input. The high tact frequency of 15 measurements/second (5 measurements/second when using linear input, thermocouples or Pt100) allows the N1500 indicator to monitor fast processes. It offers also the possibility to linearise the measurement signal when using non-linear input signals (mV, V, mA).
Features:
- Universal input
- Linearization of mV, V, mA signals
- 2 Relay outputs
- 6 Alarm features
- Voltage output 24 VDC for external 2-wire transmitter
- Memory for MAX and MIN values, hold and peak features
See more information in our shop:
***www.temperature-shop.de***
|
|
| ... products without technical information |
| |
The proven Lokotrack mobile screens are designed for high screening performance combined with good mobility. Their excellent capacity and easy adaptability to different crushing and screening processes guarantee suitability for a wide range of quarrying and contracting applications.
The ST Series track-mounted mobile screens have heavy duty frames and proven components to give long service life in most demanding screening jobs. With the ST Series, you can choose flexibly and accurately the end product fractions to be screened.
The SW Series wheel-mounted mobile screens are designed to guarantee superior mobility on wheels and the ability to produce multiple end products with constant, high capacity.
The patented design of these units allows the user to travel over roadways without special permits and set up the screen in minutes once on site.
The CV Series wheel-mounted mobile screens offer construction and recycling contractors an easy to operate, highly reliable screening plants on wheels, able to handle a wide variety of materials. Processing the materials on site minimises purchase requirements and reduces expensive hauling costs.
|
|
The TS3600 is the economic solution for producing high-quality defined grain sizes, regardless of whether it's round grain from walls or for refining building rubble that can be graded using a screen.
The tracked double-deck screen can be operated as a standalone screen to separate excavated soil, sand and gravel, plus building rubble mixed with high levels of earth and fine grain material. Thanks to the hydraulically opening feed hopper with oversized grain grating, the TS3600 can also be fed direct from a mobile RM100. Three defined final grain sizes can be produced in a single pass in combination with the RM100 and OS100 power package equipped with oversized grain re-feeding system.
The screen can be operated by one person alone and the system is available with a radio remote control. All maintenance jobs can be carried out quickly and easily, thanks to perfect accessibility.
For transport purposes the belts are moved hydraulically into the transport position so the TS3600 with its unique, compact dimensions is ready straightaway for transportation from one job to the next.
|
|
The VS60 is a compact standalone screen unit designed to sort and separate fine material from rubble, asphalt, concrete and excavated material etc.
The container-mobile twin deck screen is also an ideal complement to the RM Compact Recycler RM60 (also compatible with RM70). The two screen decks deliver the most precise level of grading by pre-screening fine grained material and considerably reducing wear in the crusher. The discharge height can be adjusted by inserting 2 additional skids.
Power can be supplied from the crusher generator - a huge advantage at more remote sites. Also available with side discharge belt, hopper extensions and container-mobile transport option.
|
|
RUBBLE MASTER CS series screens are compact linear oscillation screens that can be transported like containers. They are flexible as far as feed material is concerned an sort crushed material such as building rubble and natural rock very efficiently. Power is supplied from the crusher generator - a huge advantage at more remote sites.
The CS2500 single deck screen is perfectly matched to semi-mobile RM60 crushers. The throughput capacity of the linear oscillation screen is optimised according to the angle of the screen, mesh gap and the type of material to be processed. Even at high throughputs the CS2500 impresses with its reliable grading ability and low maintenance requirement thanks to its self-cleaning screen deck.
The two conveyor belts achieve impressive discharge heights and are integrated safely into the frame of the screen unit. They fold hydraulically for transport so the CS2500 can be loaded onto a truck equipped with a drag-on winch.
|
|
RUBBLE MASTER CS series screens are compact linear oscillation screens that can be transported like containers. They are flexible as far as feed material is concerned an sort crushed material such as building rubble and natural rock very efficiently. Power is supplied from the crusher generator - a huge advantage at more remote sites.
The CS3600/2 twin deck screen is perfectly matched to the powerful RM70 and RM80 crushers. Its throughput capacity is optimised according to the angle of the screen, mesh gap and the type of material to be processed. Even at high throughputs the CS3600/2 impresses with its reliable grading ability and low maintenance requirement thanks to self-cleaning screen decks.
The three conveyor belts achieve impressive discharge heights as well. The screened material belt is safely integrated into the framework and is folded away hydraulically prior to transport. The CS3600/2 can be transported to job sites using a truck equipped with a drag-on winch.
|
|
|
The CT224 consists of a 12-Channel Temperature Monitor and MincoSoft™ CT224 Software. It is the next generation in temperature monitoring equipment from Minco designed to meet the needs of electric machinery protection. The 12-channel scanning capability, standard RS485/RS232 interface and Windows-compatible software utility for system configuration and data logging provide overtemperature and undertemperature protection and critical feedback to safeguard expensive machinery.
|
|
The LumaSense Accufiber®TR solution provides temperature monitoring with automatic emissivity correction. Emissivity changes are due to changing material properties during certain types of material deposition or processing. For specular (smooth) surfaces, the deposition surface’s emissivity can be calculated from its reflectance. By constantly measuring this reflectance, the AccufiberTR instrument can automatically perform the emissivity correction in-situ and calculate the surface’s true temperature.
AccufiberTR seamlessly integrates ultra precise reflectance measurements with LumaSense’s class leading, lowest signal-to-noise ratio radiation detectors. If the n and k values are known for the materials, then the amplitude and periodicity of the thin film reflectance (often referred to as “fringes”) at specific wavelengths can be used to calculate film thickness. For thin films, it is critical to use both the highest quality measurement systems and shorter wavelengths to offer “resolution” into the film’s fringes to monitor film thickness.
|
|
Turbine Sentry - System Overview
An overview of the complete system and how this system is of benefit to gas turbine operators.
A typical system comprises three parts:
Blade Sentry - Measurement Pyrometer
The non-contact thermometer is mounted through the gas turbine casing and measures the temperatures of individual rotor blades.
Rotor Sentry - Data Acquisition System
The DAS logs individual blade temperature readings taken by the measurement pyrometers, samples and processes the data for use by the data analysis software, Data Sentry.
Data Sentry - Data Analysis Software
This powerful pc-based software utility has all the tools and functions necessary to obtain a complete picture of how efficiently the gas turbine is running, as well as identifying potential problems at an early stage.
|
|
| ... products without technical information |
| |
Control any size clutch or brake with optimum resolution with the PS-24 & PS-90 Power Supplies. These current regulated power supplies are used for the control of magnetic particle clutches and brakes in unwind, rewind, or intermediate tension control applications.
The PS-24 & PS-90 provide a small amount of reverse current circuitry as a standard feature to minimize the drag torque of a clutch / brake, allowing greater controllability in the lowest torque range. With selectable current ranges, these compact enclosures can be mounted inside the machine cabinet, allowing your operator to adjust torque through a remotely mounted potentiometer. Alternatively, the PS-24 & PS-90 can be controlled by a 0-10 VDC input from a PLC or other automatic control device. Both power supplies mount inside the Cygnus-E tension control as convenient package.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
