|
|
The product family SITANS T offers a complete spectrum at manufacturers of temperature sensors and industrial transmitters. Select the suitable product to your application, from simple applications to intelligent and devices with fieldbus communication.
Head transmitter SITRANS TH100, TH200, TH300, TH400
These devices are installed in the connection head of the temperature sensor. Here they amplify the weak sensor signals and reduce plant noise on signal line.
Field Transmitter SITRANS TF
Field Transmitters are installed directly on the sensor thermowell or near the sensor, if the conditions like vibration or ambient temperature allow no installation of head transmitters. Available for intrinsic safety and explosion proof application according to international standards.
Panel Transmitter SITRANS TW
Four wire transmitters are installed in the control room. Connected directly with auxiliary power they allow universal use. Extended diagnosis, simulation and signal switch are further features.
Temperature Sensors
Whether flue gas measurement in combustion plants, in pipes and vessels, Food and Beverage, Pharmacy or other applications. A broad range of temperature sensors and complete measuring points are available.
Digitales display professional thermometer SITRANS TF2
Combines three devices in one! A PT100-Thermometer, a 4..20mA Transmitter with simple setup via 3 push buttons as well as a digital display. Thermowell and housing are made from stainless steel.
|
|
| Datapaq prides itself on having the most comprehensive range of temperature profiling equipment available to suit many applications including systems for narrow or low clearance industrial ovens, high temperature processes and confined space systems. We have systems for electronics manufacturing, food processing, high temperature metal heat treatment and ceramics firing. Whether your process challenge is high temperature (up to 1300°C), has a duration of days, includes wet or steam environments, requires real-time monitoring, and many more, we have the range and the price to suit. |
|
MOLTEN METAL TEMPERATURE INDICATOR
PRODUCT DESCRIPTION:
Libratherm offers microcontroller based Molten Metal Temperature Indicator model LMI-2010, which is designed to accurately measure temperature of the molten metals, both ferrous and non ferrous. The measurement of this temperature is a critical process, since the expendable thermocouple manufacturers is dipped for merely 3 to 4 seconds and then withdrawn. In this short measurement time, the operator is guided through the measurement cycle by audio/visual alarms for thermocouple continuity, measurement in progress and measurement over. Any error in measurement or thermocouple open condition is also immediately detected by activating the audio/visual alarm.
User can select the desired type of thermocouple (either K, R, S, or B type, (depending upon the measuring range from 1200 to 1800oC), and can also set other parameters using front panel key board. During measurement, the indicator ignores the slag temperature and the Average or Plateau reading is determined using the advanced algorithm and the same is latched and displayed on the bright 7 segment 2” LED display. This reading can also be displayed on 4” remote display LRU-2010 and can be logged on to a computer using serial RS485 MODBUS RTU protocol for recording and analysis purpose. Libratherm offers supporting window based software.
|
|
The SCAN infrared line professional scanner is used for remote temperature map measurement (thermography) for process driver monitoring.
This fast speed infrared imaging (up to 400 lines per second) has applications in a wide range of industries such as:
• cement
• glass
• steel
• metallurgy
• paper
• tobacco
• plastic
• electronics
|
|
| One of the most comprehensive ranges of products in the world today are offered in the category of measurement and sensing products driven by temperature technologies. These include high temperature thermistors, gauge drivers, sensors, and elements. GE Sensing provides solutions to temperature sensing challenges faced by the various industry segments - such as medical, automotive, and telecommunications - across the globe. |
|
This is the key tool for all professionals in HVAC and industry fields.
AMI 300 can measure, store up to 12,000 values and restore on PC (wireless communication) up to 6 parameters alternately.
Pressure, temperature (RTD, manufacturer of thermocouple, NTC), humidity, air quality (CO/CO2), air velocity and airflow (vanes or hotwire), tachometry.
For visual comfort, AMI has a large colored display and easy browsing is done thanks to its industrial joystick on keypad.
Innovative and evolutive :
- AMI can be equipped with wireless probes (Radio frequency) supplied with a multifunctional key allowing measurement and settings.
- It can be equipped with interchangeable measurement modules which are individually calibrated and are automatically recognized by the instrument thanks to the Smart-plus system.
- These measurement modules are available for pressure, thermocouple temperature (4 channels), climatic conditions (hygrometry, air pressure and temperature) and current/voltage parameters.
- For instance, AMI can be equipped with several pressure measuring modules with different measuring ranges. This new system allows evolution according to measurements that must be carried out…
- Based on the same principle, all probes have the Smart-plus system and are therefore automatically recognized by the instrument. Probes are available with adjusting or calibration certificate.
* exept thermocouple probes
- A large choice of probes allows a step-by-step evolution of the instrument according to your needs : vanes Ø 14 mm, 70 mm and 100 mm, high resistance gooseneck–shaped hotwire, CO/.CO2, multifunction, high temperature hygrometry, RTD probes, thermocouple... |
|
The Rosemount 248 Temperature Monitoring Assembly was designed to meet temperature monitoring application requirements. This head mount professional transmitter with HART® protocol can easily be ordered with a variety of sensors, connection heads, and thermowells. All of this comes in a Rosemount product design to provide an accurate, reliable reading.
Easy to Order. Transmitter and Sensor Assembly in a Single Model Number
Ready to Install. Remove It from the Box and Install into the Process for significant cost savings
Unsurpassed Performance for Temperature Monitoring Points
Industry Standard DIN Form B Size Enables Mounting in Any Connection Head
Reliable EMC Performance by Meeting NAMUR NE 21 Recommendation
Communicates Using Open HART / 4-20 mA Protocol |
|
| Measurement Professional computing Corporation, a market leader in low-cost manufacturers of data acquisition, has announced the release of two Web-enabled temperature input devices, the WEB-TEMP and the WEB-TC, which allow users to take measurements and monitor them via the Internet. The new products, modeled after MCC’s popular USB-TEMP and the USB-TC products, have corresponding performance, but are Ethernet compatible with built-in Web professional servers that write temperature data to their own Web page for immediate Internet access from virtually everywhere! The WEB-TEMP provides eight temperature input channels, each supporting all of the common temperature sensors manufacturers (J, K, R, S, T, N, E, and B supplier of thermocouples; 2-, 3-, or 4-wire RTDs; thermistors, and semiconductor temperature sensors), and 8 bits of digital I/O. Each channel of the WEB-TEMP is capable of monitoring any of the supported input types, so users can mix and match the sensor to the measurement without additional signal conditioning. Moreover, the internal measurement electronics accuracy of the WEB-TEMP vastly exceeds the accuracy specifications of the temperature sensors, thereby recording the most accurate data possible. The WEB-TC specifications are similar to those of the WEB-TEMP, but support thermocouple sensors only. All eight WEB-TEMP (or WEB-TC) inputs have 500 VDC isolation to the power dispensing and Ethernet port, protecting both the computer and the input device from damage. The WEB-TEMP and WEB-TC ship with an impressive array of software included in the MCC DAQ Software CD. The disk includes applications, drivers, and libraries that meet the needs of programmers and nonprogrammers alike. |
|
| ... products without technical information |
| |
Features:
VTM-1510 video toolmaker microscope manufacturer can measure many kinds of data. It has many data processing functions such as displaying, magnifying, inputting and outputting. With color Ccd camera specification (with C-mount interface), the microscope can input and output the data by connecting with the computer. It is very convenient for the user to measure with standard M2D-AT software.
For more details, please refer to www.carmar-tech.com |
|
Measurement microscope MF-A:
- Maximum height of workpiece 220 mm (MF-A1720/H, 1730/H)
- Quick release mechanism
- For detailed information, leaflet is available on request.
High-accuracy Universal Measuring microscopy Hyper MF-U:
- World's Highest Accuracy is Achieved
- High-accuracy Measurement with the Professional laser AF (Auto-Focus)
- For detailed information, leaflet is available on request.
Vision Measuring Microscope:
- Effective Measurement with the Auto Edge Detection Tool
- Measurement Navigation Function
- For detailed information, leaflet is available on request. |
|
| The measuring software SAPHIR makes this stereo microscope an universal, though manual 2D-microscope, state-of-the-art tool. Esspecially while making first samples, the WM1 in combination with SAPHIR takes full advantage of its strenghts and capabilities. |
|
AM313T - DinoLite Plus (VISTA supported)
Featured with unique Microtouch snapshot, the AM313T offers the user another option of the way taking the picture. Without visible physical snapshot button, the Microtouch was designed to minimize the vibration when taking the picture under microscope manufacturers. The Microtouch had also seamlessly integrated with the DinoCapture professional software along with other AM313's features like measurement and PROFESSIONAL LED professional control.
Product Features:
*Resolution: 640* 480pixels (VGA)
*Adjustable magnification: 10x~50x, 200x
*Built-in 8 white-light LED illumination (software switchable)
*MicroTouch snapshot
*Frame rate: up to 30fps
*Professional interface: High speed USB image transmission (PROFESSIONAL PC)
*Dimension:10cm (Height) *3.2CM (R)
*Weight: 90g
*Software: DinoCapture
*With measurement capability
Support Operation System: Windows Vista, XP Professional x64 Edition, XP, 2000, or Windows Professional server 2003
|
|
| Nikon's Measurement microscopes offer performance, convenience and an unprecedented degree of flexibility for upgrading and expansion. The newest models are the MM400/800 Series, which deliver complete digital control for maximum measuring accuracy in demanding industrial environments. |
|
VMM-S/D series Non-contact Vision Measuring System are one of the best developed products in Carmar's scope of supply. Providing customers with precise, cost effective and high quality products are our business philosophy. Video Measuring System can satisfy all kinds of two dimensional measurements with M2D professional software.
Features:
1. High accuracy with fixed working table and granite pedestal;
2. Supplied with RS-232 professional interface and working with professional M2D measuring software:.
3. High resolution Sony 1/2" color Ccd imager and U.S. made NAVITAR professional zoom lens;
4. The user can manage and output the graph by connecting with PROFESSIONAL PC and running the M2D program.
5. One-click edge detection. |
|
Kestrel is the first non-contact measuring system to combine quality control laboratory accuracy, repeatability and optical quality, with in-line speed and ease of use in one low investment system.
Kestrel utilises Vision Engineering's patented optical projection technology to give a high resolution, high contrast view of parts to be measured. In comparison to profile projectors/shadowgraphs or video-based systems, the Kestrel's high performance pure optical system gives crisp and colour true views of intricate parts of optically difficult colour and texture (metals, plastics, ceramics). |
|
| State of the art video microscope system for Visual Inspection, Digital Image Recording, Non-contact Dimensional Measurement, Documentation & Reporting of any object in any location. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
