|
|
Do you attach special value to the durability and performance of your vacuum instrumentation? We as developer and manufacturer of vacuum transducers, gauges, vacuum meters and controllers supply products which will exceed your expectations.
Thyracont Vacuum Instruments GmbH supplies vacuum measurement and control instruments for rough to ultrahigh vacuum.
All our products are “Made in Germany”
|
|
Many vacuum applications operate only in a specific pressure range. Analog and digital total vacuum or pressure measurement instruments are employed to measure and control the total pressure in a vacuum system. Pfeiffer Vacuum offers you three different lines of total pressure gauges.
|
|
Alcatel Vacuum Technology is proud to introduce the Adixen 2000 vacuum measurement series, blending experience and innovation.
The 2000 gauge series provides pressure measurement from atmosphere down to 4.10-10 mbar. The Adixen gauges and controllers give you more than a simple pressure measurement, connected to a network with 2 set-points, 0-10 V or RS 485, the gauges can drive a production process or record the pressure trend and more.
|
|
With the magnetic distance- and angle measuring systems of SIKO, compact single systems can be assembled. Thereby a resolution of up to 0,005 mm and a measuring accuracy of up to 0,05 mm is realisable.
Advantages of the magnetic measuring principle are, insensitive against dirt and a flexible magnetic tape. Also with adverse environmental influences, a successful operation and an individual application is guraranted.
|
|
With the magnetic distance- and angle measuring systems of SIKO, compact single systems can be assembled.
Besides distance and angle also rotation can be recorded. Special sensors register the incremental segmentation of magnetic rings with a resoultion of up to 20.000 pulses per revolution. Advantages of the magnetic measuring principle are, insensitive against dirt and a flexible magnetic tape. Also with adverse environmental influences, a successful operation and an individual application is guaranted.
|
|
Merit ME110
Battery powered digital readout with the following fixing ways :
1) panel mountable by relevant brackets
2) surface mountable by metallic supports
Flexible cable max lenght 2 meters.
Magnetic reader head with small dimension.
Fixing by M3 or M4 screws.
Wide aligning tolerances.
To be used with magnetic tape Givi MP200.
Resolution (programmable): 1 - 0,1 - 0,05 - 0,01 mm
0,01 - 0,001 - 1/16 - 1/32 - 1/64 inch
1° - 0,1° - 0,01° - 0,001° angolare
Accuracy: ± 30 µm
Repeatibility: ± 1/2 digit
|
|
- Mounting gap between sensor and tape: max. 2,0 mm (0,8mm CO2)
- Sensor Housing: ABS
- Protection class: IP 65
- Operating temperature: 0° + 50°C
- Output current: max. 20 mA per channel
- Output: Push-Pull, short circuit protected
- Index: Cyclical
|
|
OPTIPACT Optical length and velocity sensor
- Contact-free optical measurement principle
- Measurement in 2 orthogonal axes
- Compact industrial design (120mm x 47,5mm x 42mm)
- Velocity range up to 4 m/s
- Detection of standstill and direction of motion
- Allows deviation from nominal working distance
- Suited for rough and smooth surfaces
- Measurement uncertainty <1 %
- Self adapting to measurement object
- Long life LED illumination
- Programmable via Graphical User Interface
- Protection class IP 65
- Price for one piece: < 1000€
|
|
LIMES Measuring system:
- Magnetic sensor is scanned along a magnetic band
- Not affected by dust, shavings, humidity
- Resolution up to 0.005 mm
- Simple mounting
- Measuring length up to 90 m
Draw wire encoder:
- Convert linear motion to rotary motion and
- simply measure with an encoder
- Measurement length up to 40000 mm
- Output signal as incremental or absolute encoder or potentiometer 0 ... 10 V, 4 ... 20 mA
|
|
The magnetic measurement system includes a sensor an electronic converter and a magnetic tape. The sensor head detects the position as it is moved over the magnetic tape.
Magnetic rings are also available for rotary motion as alternative to linear magnetic tape. Different shapes, dimensions and custom-made versions are available.
The magnetic rings can be completely integrated on customer machine; they are available for diameter up to 500 mm and they can be mounted with any Lika sensor.
The measuring system is non-contacting and therefore wear-free.
Application areas are woodworking machines and sheet metal machines.
Some features are:
- IP67 protection level
- Reduced dimensions
- Resolution up to 1 mm
Low application cost is one of the system’s advantages. Moreover the system is protected against contamination and works even with strong vibrations, or in humid or dirty environment.
|
|
LASERSPEED 4000 - Non-contact Length & Speed Measurement System
With the ability to measure length and speed non-contact with accuracy better than ±0.05%, LaserSpeed is the ideal gauge for replacing contact tachometers that are prone to a variety of measurement errors and high maintenance costs. LaserSpeed uses the non-contact laser doppler velocimetry (LDV) technique with all signal processing and intelligence built directly into the gauge, allowing it to integrate with a variety of other systems from simple length counters to advanced control systems.
LaserSpeed is able to measure length & speed on continuous and in-line processes, on most kind of material and surface types.
Specifications:
* measures from 0.4 to 4000m/min
* accurate by +/-0,05%
* stand-off distance 300mm, depth-of-field 35mm
* working temperature 5-40°C for the specified accuracy
* sealing against IP67
* Outputs:analog, RS232, 2x pulses as standard
Benefits:
1- non-contact Laser Doppler technology ensures high accuracy ( +/-0,05%) and high repeatability ( /-0,02%)
2- no moving parts: no wear or drift to the accuracy
3- independent to product size and no markings
|
|
LASERSPEED 9000 - Non-contact Length & Speed Measurement System
With the ability to measure length and speed non-contact with accuracy better than ±0.05%, LaserSpeed is the ideal gauge for replacing contact tachometers that are prone to a variety of measurement errors and high maintenance costs. LaserSpeed uses the non-contact laser doppler velocimetry (LDV) technique with all signal processing and intelligence built directly into the gauge, allowing it to integrate with a variety of other systems from simple length counters to advanced control systems.
A Bragg cell is built in the optical system to allow for measurement of speeds from 0m/min, et to detect the direction of travel of the product without the need for external information.
LaserSpeed is able to measure length & speed on dis-/continuous and in-line processes, on most kind of material and surface types.
Specifications:
* measures from 0 to 4000m/min
* accurate by +/-0,05%
* stand-off distance 300mm, depth-of-field 35mm
* working temperature 5-40°C for the specified accuracy
* sealing against IP67
* Outputs: analog, RS232, 2x pulses as standard, Ethernet
Benefits:
1- Measures from 0m/min, ideal for applications where the speed profile is variable with frequent stops or reverse speeds,
2- high accuracy ( +/-0,05%) and high repeatability ( /-0,02%)
3- no moving parts: no wear or drift to the accuracy
4- independent to product size and no markings
|
|
Four models/cross sections
- 0.1, 0.2, 0.5, 1, 2, 2.5, 5, or 10 µm
(4 µin to 0.0004") resolution with
internal electronics
- RS-422 differential line driver output
- Three accuracy grades
|
|
OPTIPACT Optical length and velocity sensor
- Contact-free optical measurement principle
- Measurement in 2 orthogonal axes
- Compact industrial design (120mm x 47,5mm x 42mm)
- Velocity range up to 4 m/s
- Detection of standstill and direction of motion
- Allows deviation from nominal working distance
- Suited for rough and smooth surfaces
- Measurement uncertainty <1 %
- Self adapting to measurement object
- Long life LED illumination
- Programmable via Graphical User Interface
- Protection class IP 65
- Price for one piece: < 1000€
|
|
Linear Position Sensing:
Comprehensive systems expertise: technological variety for the right sensor type for your drive control, machine monitoring or sensing moving processes in robotics, automation, packaging technology or the process industry.
Benefits:
- Mature technology
- Continuous innovation
- Maximum customer orientation
|
|
Based on the high-precision evaluation of several coil systems, the new position measurement systems are a combination of proven inductive sensor technology and innovative microcontroller technology. Due to the simultaneous evaluation of multiple coil systems, these positioning systems provide very high repeatability, accuracy and resolution. Because of their inductive principle of operation they do not need ferrites or magnets as counterparts. Like an inductive proximity switch, the target can be made of any metal. Integrated safety functions, which for instance display the removal of the target out of the detection range, ensure additional system safety. Due to integrated temperature compensation, the inductive positioning systems are also well suited for harsh environments and critical positioning tasks.
Advantages:
High resolution and accuracy
Very good repeatability
Minimum temperature drift
Non-contact detection
Absolute
Teachable
|
|
Glass scale technology is the industry standard and is preferred worldwide for position feedback. For nearly four decades, ACU-RITE's precision glass scale technology has proven its superior reliability through consistent accuracy and durability.
Glass is an inherently stable material that resists changes in size, shape or density due to variations in temperature or humidity. This stability allows for the generation of numerous ultra-fine line patterns; providing ACU-RITE precision glass scales with exceptional accuracy down to ±1.5µm (.00006").
ACU-RITE scales are available in travel lengths from 1"-773" and in resolutions from 0.5µm (.00002") to 10µm (.0005").
|
|
Heavy duty measuring unit, dual measuring wheels for better stability and contact, frame/bulkhead mounted.
This rugged instrument has a wide range of applications where an accurate record of length is required. It is a strong, heavy duty unit for use on calenders, tenters, rolling, ribbon winding textile machinery and almost all other continuous manufacturing processes. The unit can incorporate any of the heavy duty mechanical revolution counters described in the totalising and predetermining sections of this site.
• Available with shaft encoder for driving electronic counters or computers.
• Sturdy die-cast construction.
• Uses standard measuring wheels.
• Can tilted out of the way when not in use.
• Supplied with stand as an option.
The 2300 bolts directly onto a bulkhead or frame member. The intregal hinge arrangement allows the unit to be positioned at any angle.
The measuring wheels supplied can be 0.5m or 0.3m (18in or 12in) circumference (specify when
ordering). The weight of the assembly holds it in contact with the material being measured.
|
|
Highest quality in most compact form, that is that
SENC 50 of ACU RITE.
The small dimensions and the high accuracies of this taper roller bearingled top illumination measuring system are ideal conditions for the employment in the measuring technique.
* Compact dimensions
* Dissolutions of 0,5 µm to 5 µm
* TTL and similar signals
* Measuring lengths from 50 mm to 525 mm
* Coded reference marks %u2013
Position Trac
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
