|
|
In oder to meet with all applications, this new range is composed of thermocouple probes with connection head, heat resisting steel sheath, mounted on cable or malleable mineral insulated, with a measuring range from –40 to +1100°C.
The new range is also composed of Pt100 probes with standard connection head, threaded compression fitting, contact, ambient end, for food industry, penetration and with a measuring range from –40 to +400°C.
A large choice of accessories ( mounting brakets, compression fittings, connectors, cables ….) and converters offered by KIMO allow you to enlarge thermocouple and Pt100 working conditions.
Join our distribution network all over the word....Contact us !
|
|
- Tip-sensitive (260°C) feature fast-responding copper tip in stainless sheath.
- Mineral insulated (600°C): Stable and rugged for demanding industrial environments.
- High temperature (850°C): Laboratory grade precision in an industrial probe.
- Diameters options include 0.125", 4 mm, 0.188", 0.215", 6 mm, 0.250"
- Single and dual elements
- Wide selection of adjustable fittings, thermowells, and connection heads available from stock
- Cut-to-length option lets you adjust probe length in the field
|
|
Max. Temp: 150°C for Standard Probe
36" Insulated, 26 AWG Stranded Lead Wire
316SS Sheath
1/8, 3/16 and 1/4 " Diameter Sheaths Available
2252 Ohm, 0.2°C Elements Standard, Other 44000 Series Elements Also Available
|
|
K, T, J and E Thermocouple Types
Made from Class 1 Tolerance Wire
PFA Insulation. (max. 260°C)
Kapton Insulation (max. 315°C)
Glass Braid Insulation. (max. 480°C)
1 and 2m Lengths Standard
Max Service Temp for Connector Body 220°C
|
|
- PT100, PT1000, PTC, NTC
- Liquids and gas application
- Brass or St. Steel probe material
- 1/8" to 3/4" male process connection
- Pmax = 50 bar
- Protection class IP65
|
|
General description:
Multi-purpose temperature probe with 2-1/2" (64 mm)-long stainless steel housing.
Use to measure temperature of air, soil, or water. Add up to four probes to a single Leaf & Soil Moisture/Temperature Station. Includes 15' (4.6 m) direct-burial cable.
Compatible with both original Vantage Pro and Vantage Pro2.
|
|
Temperature
The Hydrolab temperature sensor is a 30k ohm variable resistance thermistor. The temperature sensor is included with every Hydrolab sonde.
Features:
- 316 Stainless Steel, 30k ohm thermistor
- Variable resistor
Benefits:
- Provides critical compensation for Dissolved Oxygen, Conductivity, pH, and nutrient sensors
- Compliant with EPA170.1 and SM2550B
|
|
|
|
|
|
Contact Temperature Sensors
- Platinum Pt100, Pt1000, Nickel, NTC, KTY Sensors
- PVC, Silicone, PTFE, Stainless steel cable or in a case
- impact-resistant plastics case protection class IP65
Outdoor Temperature Sensors
- Platinum Pt100, Pt1000, Nickel, NTC, KTY Sensors
- optional case with external probe tube for fast detection
- impact-resistant plastics case protection class IP65
Screw-In Temperature Sensors
- Platinum Pt100, Pt1000, Nickel, NTC, KTY Sensors
- impact-resistant plastics case protection class IP65 optional with display, high-quality aluminium connecting head form J / form B
- brass or stainless steel immersion sleeve
Hand Infeed Sensors
- PTFE or plastic hand grip
- PVC, silicone or PTFE cable
- water-vapour-proof casted
Cable Temperature Sensors
- Platinum Pt100, Pt1000, Nickel, NTC, KTY Sensors
- PVC, Silicone, PTFE, Stainless steel cable with different lengths
- moisture sealed rolled
Duct Temperature Sensors
- Platinum Pt100, Pt1000, Nickel, NTC, KTY Sensors
- Impact resistant plastics case protection class IP65
- high-quality aluminium connecting head form J, form B
Surface Temperature Sensors
- Platinum Pt100, Pt1000, Nickel, NTC, KTY Sensors
- PVC, Silicone, PTFE, Stainless steel cable with different lengths
- self-adhesive, screw-on type, magnetic
Room Temperature Sensors
- Platinum Pt100, Pt1000, Nickel, PTC, NTC, KTY Sensors
- modern room housing design with air slots
- alternatively with rotary switch, potentiometer, LEDs, level switch etc.
Radiation Temperature Sensors
- Platinum Pt100, Pt1000, Nickel, PTC, NTC, KTY sensors
- measurement range -30...+75°C
- windchill factor
|
|
|
|
|
|
Contact Temperature Sensors
- Platinum Pt100, Pt1000, Nickel, NTC, KTY Sensors
- PVC, Silicone, PTFE, Stainless steel cable or in a case
- impact-resistant plastics case protection class IP65
Outdoor Temperature Sensors
- Platinum Pt100, Pt1000, Nickel, NTC, KTY Sensors
- optional case with external probe tube for fast detection
- impact-resistant plastics case protection class IP65
Screw-In Temperature Sensors
- Platinum Pt100, Pt1000, Nickel, NTC, KTY Sensors
- impact-resistant plastics case protection class IP65 optional with display, high-quality aluminium connecting head form J / form B, cable sensor with screw thread
- brass or stainless steel immersion sleeve
Hand Infeed Sensors
- PTFE or plastic hand grip
- PVC, silicone or PTFE cable
- water-vapour-proof casted
Cable Temperature Sensors
- Platinum Pt100, Pt1000, Nickel, NTC, KTY Sensors
- PVC, Silicone, PTFE, Stainless steel cable with different lengths
- moisture sealed rolled
Duct Temperature Sensors
- Platinum Pt100, Pt1000, Nickel, NTC, KTY Sensors
- Impact resistant plastics case protection class IP65
- high-quality aluminium connecting head form J, form B
Surface Temperature Sensors
- Platinum Pt100, Pt1000, Nickel, NTC, KTY Sensors
- PVC, Silicone, PTFE, Stainless steel cable with different lengths
- self-adhesive, screw-on type, magnetic
Room Temperature Sensors
- Platinum Pt100, Pt1000, Nickel, PTC, NTC, KTY Sensors
- modern room housing design with air slots
- alternatively with rotary switch, potentiometer, LEDs, level switch etc.
Radiation Temperature Sensors
- Platinum Pt100, Pt1000, Nickel, PTC, NTC, KTY sensors
- measurement range -30...+75°C
- measures the windchill factor
|
|
Our Advanced Thermal Products Operation specializes in the design and manufacture of custom temperature probes and assemblies that operate from -50°C to +500°C. Our sensor solutions cover a wide range of applications in both heating and cooling applications and we can manufacture a temperature probe to meet your exact needs.
Features
• Rugged, moisture resistant, temperature sensing probes and assemblies for cooling applications
• Effective in high moisture and freeze/thaw applications
• Sensor assemblies designed to handle the rigors of high temperature applications, such as gas temperature monitoring & cooking
|
|
Application Notes:
Inexpensive sensor
Replacement element
For assembly into sheath
Low thermal mass
Suitable for equipment assemblies
Special Options:
A range of standard and special housings is available for element protection
Higher accuracy sensors A, 1/3,1/5,1/10 DIN
Other stranding options
Pt 50, Pt 500, Pt 1000 and Pt 2000, Cu or Ni element
2 or 4 wires
Tagging
RT can be replaced with a thermistor
|
|
|
|
|
|
Type Designation: CRM
Measuring Range: -100 to + 500 ° C
Common Sensor Types: 1 Pt 100 B
Common Sensor Size: 2 x 2.2mm, Thin film
Temperature Coefficient: 0.3850 ohms /° C
Wiring: 3 wire, marked red/red/white
Common Pocket Diameters: Ø 2.0mm to Ø 12.7mm,
Common Insulation: PVC, silicon rubber, PTFE, glass fibre
Common Stranding: 7x0.2
Common Sheaths: 316SS, brass, aluminium
Tail detail: 50mm tails, 10mm tinned
Application Notes:
A very common sensor type
Fast sensor response possible
The enclosure has many possibilities
Highly engineered pockets are possible
Ideal for high volume manufacture and fixing in to original equipment
Very small sizes available
A wide variety of encapsulants for pocket filling
Special Options:
Threaded pocket
Machined high-tolerance metal enclosure
Cable spring relief available
Partial heat transfer paste filling
Duplex
Higher accuracy sensors A, 1/3,1/5,1/10 DIN
Other stranding options
Pt 50, Pt 500, Pt 1000 and Pt 2000, Cu or Ni element
2 or 4 wires
RT can be replaced with a thermistor
IP68 compatible designs
|
|
Magnetic surface thermocouple
Magnetic surface probe
Calibration Type K.
Measures surface temperature of ferrous materials such as bearings on induction heaters.
Magnet diameter Ø 14mm.
Response time 7 sec.
Maximum temperature at tip 220°C
|
|
|
Conax Technologies offers thermocouple assemblies specifically designed for durability and reliability in applications to 4200˚ F (2315˚ C). Such applications generally involve oxidizing, reducing or inert gas atmospheres that challenge the life of the thermocouple. Numerous options in thermocouple type, sheath materials and termination styles are available. Assemblies can also include adjustable mounting fittings, thermowells and ceramic tubewells.
|
|
Push-in thermocouple probes with terminal head are intended for industrial measurement of high temperatures of hot gases and fluids at pressure ~1 bar. The main applications are combustion control, metal, cement, ceramic and glass industries.
-For measuring temperatures from -200 to +1600 ° C
-K, J, N, S or B type thermocouple
-Mineral insulated or thick-wall protection tube made of
heat-resistant alloy or ceramics
-Variety of terminal heads and connection fittings
-Head-mountable transmitters available — to provide
0-10 V / 4-20 mA or RS485 Modbus RTU communication
|
|
In numerous branches of industry heat-treatment and combustion processes play a decisive role during production and in the quality of the final product.
These applications have one thing in common:
Due to the high temperatures thermocouples are almost always used. Besides the non-precious-metalcontaining ones, mainly types E, J or L, K and N, platinum thermocouples types S, R or B are increasingly being used.
These must be protected against contaminating, corrosive and/or abrasive ambient influences.
For various applications we offer different combinations of ceramic and metallic protection resp. mounting tubes. You will find a list of the designs AM and BM, resp. AMK and BMK, resp. AK and BK, resp. AKK and BKK in our product information ''Straight Thermocouples''.
|
|
|
OMEGA® Exotic Thermocouple Probes are designed for use in extreme temperatures, up to 2315°C (4200°F). These probes utilize either Platinum/Rhodium (types R, S, or B) or Tungsten/Rhenium (types G, C, or D) elements, with a variety of insulations and sheath materials. Depending upon the sheath material selected, these probes may be used in inert, oxidizing, reducing or vacuum conditions. The maximum temperature is based on the lowest max. temperature of the element, insulation and sheath material. Five cold end probe terminations are available: replacement probe, subminiature or standard size ceramic connector, heavy-duty standard size, molybdenum-sheathed nylon connector, or transition joint with 72-inch lead wire.
|
|
Tempsens an ISO 9001 company offers a wide range of temperature sensors used in Glass Industry for accurate temperature measurement.
These are:
- Trilevel Thermocouple
- Simplex/Duplex Thermocouple for Fore Hearth/Distributor
- Glass Level Probes for Level Control,
- Thermocouples for Furnace Crown, Bottom, Regenerators and
- Spout Thermocouples
Features:
- Available in R, S, B type sensors with special coating
- Temperature measuring range of 100° to 1600°C
- Protection sheath of recrystallised alumina KER 710(C-799) tube with hole at one end
- Special hardered platinum thimble.
- Specially established quality system
|
|
HT 4010 High Temperature Thermocouple
High Temperature Thermocouple Assemblies Type K, N and Platinum-Platinum Rhodium Thermocouples R,S and B for temperatures up to 1600 °C or higher with primary and secondary ceramic protection tubes. Depending on the process conditions we supply protection tubes from Kanthal, Silicium-Carbide, Tantalum, Titanium, Hasteloy-alloys, Haynes, Monel etc. for temperature sensing applications like blast or carburizing furnaces, kilns, ovens, galvanising baths and fluegas, where their robust construction ensures long sensor life.
|
|
These industrial thermocouples are used in industrial processes where temperatures are very high.
Thermocouples are protected by one or two ceramic protectors. The choice of the tube material depends on the temperature to be measured and on the working conditions.
Connection to the regulating system is made through a connecting head, generally in aluminium, equiped with a ceramic terminal block or a transmitter.
|
|
Mineral Insulated (MIR and MIT) Sensor
Both the MIR and MIT sensors are manufactured from ready made, stock lengths of stainless steel sheathed, mineral insulated signal or thermocouple wire.
These sensors can be produced in either PT100 RTD or thermocouple formats.
The soft annealed stainless steel sheath is flexible and allows the user to bend and shape the sheath when required. MI´s are available from as small as 0.5mm in diameter, far smaller than is possible with fabricated rigid stems and as such are extremely flexible, though not as robust.
Various diameters and grades of stainless steel are also available to suit process requirements. These sensors are supplied as plain stems with lead wire as standard, alternatively terminal heads are available when required and various process connections to suit.
Sensors are available in single, duplex or triplex formats with resistance thermometers available in 2, 3 or 4 wire connection.
|
|
|
|
|
|
Our Advanced Thermal Products Operation provides a broad range of both NTC and PTC components. NTC thermistors are metal oxide semiconductors that decrease in resistance at temperature increases and are normally used as temperature sensing elements in a wide range of applications. NTC thermistors have a well defined resistance versus temperature characteristic and are very sensitive to even the smallest temperature change.
NTC Ceramic Component Features
• Trimable to very close tolerances; better than ±0.1°C over a 70°C temperature span
• Configurations include discs, epoxy coated chips, radial and axial glass encapsulated and others
• Low cost
• Ideal for high volume OEM applications
PTC thermistors are ceramic semiconductors with a switching characteristic; a very steep resistance versus temperature characteristic near their switch temperature. Spectrum Sensors can provide a custom solution to a range of applications at a low cost with an extremely reliable product by adjusting a range of the electrical and mechanical parameters of the ceramic element.
PTC Ceramic Component Features
• Applications include: heating elements to overcurrent protection, liquid level/air flow and many more
• Adjustable characteristics include switch temperature from approximately 50°C to approximately 170°C, R25 and tolerance, voltage rating, mechanical configuration and many more.
|
|
Measurement Specialties’ glass encapsulated thermistor components are ideal for accurate and reliable temperature measurement, control, or calibration applications.
Available in a range of resistance curves and tolerances.
Temperature Sensor - Radial Glass NTC Thermistors Series A
Features:
- 2K to 500K Ohms Resistance @25ºC
- Hermetically Sealed Package
- High Temperature Stability
- Available in ±1%, ±2%, ±3% or ±5% Tolerance @25ºC
- Glass Encapsulation
- Temperature Range -40ºC to +250ºC
- Low Cost
- RoHS Compliant
|
|
Since 1984 B&B Thermo-Technik develop and manufacture successfully temperature probes.
New ideas were always a reason why B&B is one step further than its competitors. Our customers are the focus of our thinking and acting. For them we investigate, analize and realize almost everything in the temperature measurement.
Just send us your inquiry and we will supply you with a detailed offer and the solution for your measuring problem.
You will find our range of standard sensors in our Online-Shop:
www.temperature-shop.eu
There you will also get more information about our range of temperature measuring technics:
- Temperature / Humidity Sensors
- Thermocouple Connectors
- Digital Thermomters
- Infrared Thermomters
- Stationary Pyrometers
- Controllers
- Indicators
- Data Loggers
- Hygrometers
- Transmitters
|
|
|
Conax Technologies thermocouples are available in a wide range of thermocouple material types and are available in both standard and custom configurations to meet your specific installation requirements, from bare wire for fast response, metal sheath magnesium oxide insulated configurations for vibration/shock environments, to noble metal thermocouples configured with ceramic tubewells for extended life at high temperatures (up to 4,200° F/2300° C), with accuracies to standard or special limits of error.
|
|
|
|
|
|
Examples:
-Screw-in melt thermocouples (90.1090)
for temperatures from -40 to +600°C
available with different thermocouples
with stainless steel thermowell
system insulated or non-insulated
for applications in the plastics industry
Screw-in melt thermocouples are preferred for measuring melt temperatures in the plastics industry. Depending on the requirements, sword-shaped or plane probe tips provide for the ideal measuring conditions. The compensating cables are appropriate for temperatures ranging from -40 to 400°C.
The measuring insert contains standard thermocouples (elements) according to
EN 60 584.
-Push-in thermocouples with compensating cable (90.1105)
for temperatures from 0 to 600°C
available with different thermocouples
with stainless steel protection tube
silicone compensating cable or with metal braiding
also with 90° cable entry
Push-in thermocouples are preferred for measuring temperatures on solids, such as hotplates and welding jaws. Applications include ovens, plant engineering and machinery.
Depending on the version, compensating cables are suitable for use in dry areas within the temperature range -20 to 350°C. The connection of the cable to the protection tube incorporates strain relief. A cable protector is available as an option.
Protection tubes in stainless steel protect the measuring insert from chemical influences and mechanical damage.
The measuring insert is fitted with thermocouples to EN 60 584 and DIN 43 710
|
|
The probe sensing tip is constructed of copper alloy which is twenty times more conductive than stainless steel. The sensors react more quickly to changes and indicate tip temperature instead of stem temperature. The result is better accuracy in thermowells, bearings, and other installations.
- 0.250" diameter is recommended for use in thermowells.
- Copper alloy tip for fast response
- Accurate sensing to 260°C (500°F)
- Non-armor models can be user-shortened
|
|
Application Notes:
Suitable for quick replacement on plants
Can be used on equipment for fast assembly
Tough design for industrial use
Special Options:
Socket instead of plug
Duplex
Diameters between 0.5 and 10.8mm
Reduced tips
Sensors bent to shape
Compression fitting
Weld pads or weld on tips
High vibration schemes
High Temperature plug/socket available to 350 ° C
Ceramic plug/socket available to 500 ° C
Insulated exposed or grounded junction
Tagging
|
|
|
The Thermometrics Type MA400 interchangeable temperature probes have been designed to provide high reliability and performance for temperature measuring and controlling instruments. The Series 400 temperature probes are based on our 2252 Ohm interchangeable curve.
|
|
Type Designation: CTE
Measuring Range: -100 to + 300 ° C
Common Sensor Types: K,J,N,T,E
Common Insulation : PVC, silicon rubber, PTFE, glass fibre
Common Stranding: 1x0.2, 1x0.315, 1x0.5, 7x0.2, 13x0.2
Common Eye Size: M4, M5, M6, M8, M10, BA sizes.
Tail detail: 50mm tails, 10mm tinned
Application Notes:
Good for high volume manufacture and fixing on to original equipment.
Special Options:
Duplex
Insulated or grounded junction
|
|
|
|