|
|
The SL100 Steriprobe® (Sterimaster® in the USA), load/chamber probe was developed specifically to meet the demanding conditions presented by the chamber environment found in modern autoclaves. The sensitivity and accuracy of the sensor meets the requirements of current European and USA legislation whilst being of robust mechanical design.
The ‘Steriprobe’ has been designed to withstand these conditions and offers a reliability factor surpassing that previously obtainable. During manufacture every weld undergoes NDT examination and each completed assembly is 100% tested.
These units are available as PT100 resistance thermometers to all tolerance classes and with 3 or 4 wire connection also as type 'T' thermocouples in Class 1 material. They can be supplied in single, duplex or triplex detector format with probe lengths to requirements.
The assembly materials of construction are 316L stainless steel, PTFE and silicone and all components have full traceability.
Thi |
|
Autoclave Drain/Air Filter (SD050) or Freezer (SD051) Sensor :
The SD050 series drain/air detector and freezer sensor is not presented with the same demanding conditions that are experienced by the chamber/load probe.
However the critical measurement that they transmit to the control system requires no less an integrity than that for the chamber or load probe. To maintain this integrity the same manufacturing programme as that used for the chamber and load probes is performed.
The SD050 sensors are used extensively in autoclaves manufactured by most of the major manufacturers either as original equipment or as replacement parts.
At the other end of the temperature spectrum the SD051 is designed for use in pharmaceutical freezers, refrigerators and incubators. |
|
Validation Thermocouple Wire and Looms (VTFP):
It is a regulatory requirement when validating autoclaves and lyophilizers that Type ‘T´ thermocouples of Class 1 material grade are used.
The VTFP validation thermocouple wire meets this requirement and is supplied either in pre-cut lengths from 1 metre upto 100 metre with a formed hot junction, the hot junction can be left bare or encapsulated in a Teflon tip. The cable can also be supplied on 100/300 metre long reels.
When considering the temperature mapping of large chambers and when multiple thermocouples are to be used, this material can be supplied as a cable loom. This approach eases the installation and general handling of multiple thermocouples and offers a more protective arrangement. All the conductors are identified with an ID number to ease location identity and connectivity.
When required the thermocouple cold junctions can be fitted with miniature or standard size thermocouple connectors.
|
|
Conventional methods of chamber entry for validation thermocouples allow only limited numbers of thermocouples to be used. They are relatively time consuming in their application and frequently prone to unacceptable leakage.
The TCEG/1 addresses both these problem areas by providing individual slots for 18 separate thermocouples and a rapid action, locking and securing mechanism.
By utilising a three part sealant arrangement the gland becomes a TCEG/2 with the opportunity of increasing the capacity to 36 individual thermocouples. Should even more thermocouples need to be accommodated, then a ‘Y’ adapter connected to the chamber entry port can double both these quantities.
For mounting onto the autoclave chamber the TCEG is supplied with a Tri-clamp flange with the option of having a 1½” or up to 2½” flange.
The gland body is machined from 316L stainless steel with the cap in CZ121 brass. Sealants are in medical grade silicone to Shore 40 hardness and in accordance with FDA USP Class VI.
|
|
| Placed in the autoclave, the Anabac deodorant provides a discreet and perfumed touch to the lab. Choose between Classic, Poma or Citrus fragance. |
|
| Placed in the autoclave, the Anabac deodorant provides a discreet and perfumed touch to the lab. Choose between Classic, Poma or Citrus fragance. |
|
| All series are a non-rotating rising stem design, working pressures to 150,000 psi (1379 bar). Tubing sizes range from 1/4" to 1".Tubing connections utilizes Autoclave's coned and threaded design. Operating temperatures from -423°F to 1200°F (-252°C to 649°C). 316 stainless steel construction, other options available. |
|
| ... products without technical information |
| |
| High pressure reactors can be customized with sightglasses, liners & high pressure analytical probes. Ease of cleaning & elimination of foot bearings reduces the risk of cross-contamination. It has indefinite service life & improved experimental repeatability compared to non-stirred autoclaves, laboratory bombs & reaction kettles. See AE Closure Ultra High Pressure Reactors for pressures above 5,000 psi (379 bar). See Easy Open Laboratory Reactors for pressures of 3,300 psi (227 bar) or less. |
|
| ... products without technical information |
| |
| Autoclave Engineers offers Seamless High Pressure Heavy Wall stainless steel tubing for pressures above 10,000 psi (690 bar) up to over 150,000 psi (10,000 bar). Also available in specialty materials such as Inconel, Duplex, Super Duplex, and others. A complete line of Valves, and Fittings are also available. |
|
| Autoclave Engineers’ MagneDrives® provide high speed, magnetically coupled mixing in high-pressure situations without contamination of the process. The MagneDrives® are available in wide variety of sizes from small laboratory sizes up to production plant mixer sizes. These high-speed mixers are used for gas dispersion, liquid blending and solids suspension. |
|
| Autoclave Engineers’ MagneDrives® provide high speed, magnetically coupled mixing in high-pressure situations without contamination of the process. The MagneDrives® are available in wide variety of sizes from small laboratory sizes up to production plant mixer sizes. These high-speed mixers are used for gas dispersion, liquid blending and solids suspension. |
|
| All series are a non-rotating rising stem design, working pressures to 150,000 psi (1379 bar). Tubing sizes range from 1/4" to 1".Tubing connections utilizes Autoclave's coned and threaded design. Operating temperatures from -423°F to 1200°F (-252°C to 649°C). 316 stainless steel construction, other options available. |
|
Autoclave's medium pressure and high pressure series use the coned-and-threaded connection. This metal to metal connection features orifice sizes to match the high flow characteristics of this series. Autoclave's fittings and tubing are used as fluid handling components for the chemical/petrochemical, research, and oil and gas industries and have different ranges capable of operating to 150,000 psi (10,000 bar) and range in size from 1/4" to 1" tube size.
|
|
| Autoclave's high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety of valve styles, sizes, and process connections for pressures to 20,000 psi. Our unique design innovations include an integral one-piece trunnion mounted ball and stem that eliminates the shear failure common in two piece designs, re-torqueable seat glands that result in longer seat life, and lower friction stem seal that reduces actuation torque and enhances cycle life. |
|
|
|
