|
|
Transducer and switching modules for temperature, humidity and pressure, explosion proof
Elektrical, explosion proof trandsucer, series ExCon-A, Red-Con-A, ExCon-D, RedCon-D and EXL-IMU-1 as well as switching modules series EXL-IRU-1, to connect modulating or binary temperature, humidity and pressure sensors, in acc. with ATEX 94/9/EG for use in hazardous areas zone 1, 2, 21 and 22 (in acc. to sensor type), for all kind of gas, mixtures, vapours and dust. 24 VAC/DC supply, adjustable on site, integral display for programming and for actual value indication.
series ExCon-A for modulating, analogue sensors (type ExSens) and ExCon-D for modulating, digital sensors (type ExPro), for use in hazardous areas zone 1, 2, 21 and 22. series RedCon-A modulating, analogue sensors (type ExSens) and RedCon-D for modulating, digital sensors (type ExPro), for use in hazardous areas zone 2 and 22.
series EXL-IMU-1 for modulating, analogue sensors (type ExSens) for use of sensors in zone 1, 2, 21 and 22, the module must be installed in the safe are and is prepared for DIN rail mounting.
series EXL-IRU-1 for binary, analogue sensors (type ExSens) for use of sensors in zone 1, 2, 21 and 22, the module must be installed in the safe are and is prepared for DIN rail mounting. |
|
EE10 Series
HVAC Humidity & Temperature Transmitter for Indoor Applications
EE16 Series
Humidity & Temperature Transmitters for HVAC Applications
EE21 Series
High-Precision Humidity / Temperature Transmitter for HVAC
EE22 Series
Humidity / Temperature Transmitter with interchangeable Probes
Specific for the EE22 series are the interchangeable sensing probes EE07 with connectors.
The calibration data is stored in the probes, which are interchangeable and therefore probe replacement does not affect the performance of the EE22.
The outstanding accuracy over the entire temperature range is based on very precise calibration methods and on the latest microprocessor technology. Well-proven E E humidity sensor elements ensure excellent long-term stability.
EE23 Series
Multifunctional Humidity / Temperature Transmitter
|
|
Minco humidity and humidity plus temperature transmitters are designed using an advanced microprocessor. Digital signal processing allows these transmitters to precisely match the characteristics of the humidity sensor to a wide range of RH and temperature values found in the many applications the product serves.
The humidity sensor is comprised of an integrated circuit (IC) with a stable polymer element and platinum RTD that is used for temperature compensation. This sensor offers outstanding resistance to airborne contaminant and chemicals, and is protected by a sintered stainless steel filter which resists condensation.
Wall/Duct/OSA mounting configurations
Accuracies of ±1% or ±2% RH
Temperature compensated
Temperature output option
Two-point field calibration
NIST traceable calibrations
|
|
New! The Vaisala Combined Pressure, Humidity and Temperature Transmitter PTU300
Vaisala introduces a new generation barometric pressure, relative humidity and temperature transmitter series, the Vaisala Combined Pressure, Humidity and Temperature Transmitter PTU300. The PTU300 features fully digital measuring electronics for all three parameters, several small RH&T sensor heads for different applications, and calculated humidity variables. The new backlit display shows three-hour graphical trends and up to one year of historical data. The recorded measurement data can be viewed on the display or transferred to a PC. Seven languages options are also available.
The PTU has four different probe options: PTU301 for laboratories, PTU303 for outdoor use, the warmed PTU307 probe for demanding meteorology, and the PTU30T for pressure and temperature measurement only.
The Vaisala BAROCAP® sensor is used for pressure measurement and the Vaisala HUMICAP® sensor measures humidity. Both sensors are known for their high accuracy and long-term stability. The temperature sensor is a platinum RTD sensor.
Applications include environmental monitoring in calibration laboratories, GPS meteorology and weather stations.
|
|
HumiTracTM features a NIST traceable, field-replaceable sensor tip module that allows the end user to replace the sensor on-site and maintain ±2% RH accuracy and NIST traceability. This virtually eliminates the need for time consuming and costly factory calibration, while reducing downtime during service intervals to near zero. HumiTracTM is designed to be highly configurable in the field - by minimizing the necessary number of orderable configurations, GE reduces distributor inventory costs and provides maximum flexibility to the installer. All versions feature field-selectable outputs (0-5V, 0-10V, 4-20mA) and passive temperature versions incorporate both a 3K and 10K O thermistors. Signal-conditioned temperature versions are available scaled from 0 to 50°C or -40 to 60°C. HumiTrac is available in humidity accuracies of ±2% or ±5%, and offered in wall mount, duct mount and outdoor air configurations.
|
|
Humdity- and Humidity-and Temperature Transmitters for use in air-conditioning systems, building services management systems and ventilation technology. Use of capacitive humidity sensors is a guarantee of high long term stability, resistance to dew formation, small hysteresis and good dynamic performance.
In this product group Galltec+Mela offers transmitters, specially adapted to the needs of the ventilation and air-conditioning sector but as well standard transmitters for all applications where air humidity and temperature has to be monitored. For more difiicult applications we offer our transmitters for industrial use.
|
|
EE32/33 Series
Humidity / Temperature Transmitter for High Humidity and Chemical Applications
The highly accurate EE32/33 series are designed for fast and reliable measurement of relative humidity / dew point temperature / absolute humidity / ...under the most demanding conditions.
Neither condensation nor heavy chemical pollutions will affect prompt and reliable measurements. Process pressures as high as 100 bar (1450 psi) and continuous high humidity are also no problem for the EE32/33 series.
EE31 Series
Multifunctional Humidity / Temperature Transmitter for Humidity / Temperature / Dew Point / Absolute Humidity...
The optimal hardware structure of transmitters of the EE31 series for varying applications is achieved by combining various standard mechanical and electronic modules.
Besides relative humidity and temperature following quantities are also measured:
absolute humidity
dewpoint temperature
frostpoint temperature
specific enthalpy
wet bulb temperature
water vapour partial pressure
mixture ratio
EE30EX Series
Humidity / Temperature Transmitter for Intrinsically Safe Applications
EE29 Series
Multifunctional Humidity / Temperature Transmitter up to 180 degC
EE23 Series
Multifunctional Humidity / Temperature Transmitter up to 120 degC
EE22 Series
Humidity / Temperature Transmitter with interchangeable Probes
|
|
Product Description:
Libratherm offers Relative Humidity and Temperature transmitter model HTX-3000 for measuring and transmitting the analogue and digital values proportional to these two parameters. HTX-3000 is designed using the latest micro-controller, incorporating Pt-100 class A element for temperature sensing and Monolithic sensor for %RH sensing. The two independent loop current outputs of 4-20mA proportional to both the parameters are available for remote measurement and indication. To suit industrial requirement the transmitter is available in both duct type and wall mounting type
assembly, and for the local indication of %RH and Temperature, two independent 4 digit 7 segment red LED displays are provided. For serial interface with PLC or DCS or with any other process controller – digital serial communication on RS485 bus with MODBUS RTU protocol in slave mode is also provided. Using RS 485 interface is advantageous, since number of wires as with the three wire of 4-20mA per transmitter can be avoided (3 wires multiply by no. of transmitters), since only two wires can be looped with multiple transmitters in multi-drop wiring. These transmitters finds application in HVAC, Climatic control, Stability chamber, Hospitals, Green houses, useful for Validation agencies and for regulatory requirement of FDA, CGMP, ISO14644 etc….
|
|
| Michell Instruments offers a wide range of humidity and temperature measuring sensors and instruments, including relative humidity transmitters, humidity and temperature transmitters, handheld indicators and humidity generators. |
|
Minco humidity and humidity plus temperature transmitters are designed using an advanced microprocessor. Digital signal processing allows these transmitters to precisely match the characteristics of the humidity sensor to a wide range of RH and temperature values found in the many applications the product serves.
The humidity sensor is comprised of an integrated circuit (IC) with a stable polymer element and platinum RTD that is used for temperature compensation. This sensor offers outstanding resistance to airborne contaminant and chemicals, and is protected by a sintered stainless steel filter which resists condensation.
- Wall/Duct/OSA mounting configurations
- Accuracies of ±1% or ±2% RH
- Temperature compensated
- Temperature output option
- Two-point field calibration
- NIST traceable calibrations
|
|
X-Hum Analog is a new & modern intelligent temperature and humidity transmitter based on a revolutioning CMO Sens technology. It combines sensors, AD converting and calibration in the same technology. Serial communication and digital sensor techniques are the keywords X-Hum Analog talks to the sensor in a serial fashion.
X-Hum Analog is based on this new intelligent sensor element, and uses
all the features that follows. It needs never to be calibrated , as the sensor itself is digital and calibrated from the factory.. 10 bit accuracy / small tolerances combined with great repeatability in different environments makes It ideal for high precision temperature and humidity transmitters.
X-Hum Analog is a digital transmitter with an analog interface,
12-24V ~/= supply with polarity protection and supports a 0-10V output for the RH measurements.
X-Hum Analog can be delivered in 2 different tolerances, 3% and 5% .
X-Hum Analog has an integrated cable moulded to a cable entry and is terminated with a M12 sensor plug with 4 poles for connecting to older equipment, as well as new equipments.
X-Hum Analog is capsulated in a Polycarbonate cabinet, with separate lid and sealing , that makes the unit IP67 tight. The sensor itself is protected from a PP+PTFE protective cap and an O-ring |
|
Features:
Accuracy up to ±1.7 % RH
Digital probe of the 6600 instruments: can be calibrated and exchanged and is equipped with its own order number
Wall, duct and cable probes, can be configured upon customer request and are heat resistant up to +120 °C
Highest availability by means of early warnings, e.g. in the event of sensor failure, condensation etc. (preventative maintenance)
Different assembly variants:
Wall-mounted version
Duct version
Probe version
Optimum calibration concept with
adjustment of entire signal chain, including analog adjustment, without dismantling the transmitter
1-point adjustment can be performed on-site easily and quickly using t400 or t650
2-point adjustment via P2A software or user menu |
|
The Vaisala HUMICAP® Humidity and Temperature Transmitter Series HMT330 was developed for demanding industrial applications where stable measurement and wide customization possibilities are important.
As a totally new feature in this product class, the HMT330 has a large numerical and graphical display with multilingual user interface. It allows the user to easily monitor measurement trends with 1-year history.
Vaisala HUMICAP® products have been the market leaders in industrial and meteorological humidity measurements for over a decade.
The new HMT330 series consists of six models covering the full humidity measurement range from 0 to 100 %RH. The temperature ranges are between –70 and +180 °C, and pressure ranges between 0 and 100 bar, depending on the model. In very humid or chemically harsh conditions, Vaisala's unique warmed probe and chemical purge features help to maintain measurement reliability.
The HMT330 can output multiple humidity parameters, and the outputs available include three analog outputs, serial interfaces, and alarm relays. A choice of mains or DC power and several optional mounting accessories make it easy to install the instrument.
|
|
The humidity sensor FG80 with Polyga® sensor element for the measurement of relative air humidity or as combined transmitter with additional temperatur sensor element for simultaneous temperature measurement.
The very robust Polyga® sensor element offers a very good long-term stability and hight accuracy at high humidity. |
|
The humidity and temperature transmitters for industrial applications measure relative humidity and temperature f.i. in air and other non-aggressive gases within a (working) temperature range up to 200°C or under pressure up to 25 bar.
Galltec+Mela offer as well versions for applications in gases containing ammonia or transmitters in die cast housing for outdoor use.
|
|
| ... products without technical information |
| |
Transducer and switching modules for temperature, humidity and pressure, explosion proof
Elektrical, explosion proof trandsucer, series ExCon-A, Red-Con-A, ExCon-D, RedCon-D and EXL-IMU-1 as well as switching modules series EXL-IRU-1, to connect modulating or binary temperature, humidity and pressure sensors, in acc. with ATEX 94/9/EG for use in hazardous areas zone 1, 2, 21 and 22 (in acc. to sensor type), for all kind of gas, mixtures, vapours and dust. 24 VAC/DC supply, adjustable on site, integral display for programming and for actual value indication.
series ExCon-A for modulating, analogue sensors (type ExSens) and ExCon-D for modulating, digital sensors (type ExPro), for use in hazardous areas zone 1, 2, 21 and 22. series RedCon-A modulating, analogue sensors (type ExSens) and RedCon-D for modulating, digital sensors (type ExPro), for use in hazardous areas zone 2 and 22.
series EXL-IMU-1 for modulating, analogue sensors (type ExSens) for use of sensors in zone 1, 2, 21 and 22, the module must be installed in the safe are and is prepared for DIN rail mounting.
series EXL-IRU-1 for binary, analogue sensors (type ExSens) for use of sensors in zone 1, 2, 21 and 22, the module must be installed in the safe are and is prepared for DIN rail mounting. |
|
New! The Vaisala Combined Pressure, Humidity and Temperature Transmitter PTU300
Vaisala introduces a new generation barometric pressure, relative humidity and temperature transmitter series, the Vaisala Combined Pressure, Humidity and Temperature Transmitter PTU300. The PTU300 features fully digital measuring electronics for all three parameters, several small RH&T sensor heads for different applications, and calculated humidity variables. The new backlit display shows three-hour graphical trends and up to one year of historical data. The recorded measurement data can be viewed on the display or transferred to a PC. Seven languages options are also available.
The PTU has four different probe options: PTU301 for laboratories, PTU303 for outdoor use, the warmed PTU307 probe for demanding meteorology, and the PTU30T for pressure and temperature measurement only.
The Vaisala BAROCAP® sensor is used for pressure measurement and the Vaisala HUMICAP® sensor measures humidity. Both sensors are known for their high accuracy and long-term stability. The temperature sensor is a platinum RTD sensor.
Applications include environmental monitoring in calibration laboratories, GPS meteorology and weather stations.
|
|
|
|
see the results for the following category