|
|
| DIAS Infrared GmbH is well known as a manufacturer of high-quality pyroelectric detectors for temperature measurement, gas analysis and spectrometry. The detectors stand out due to extremely high detectivity as well as low microphonic effect. We provide a product range from single element detectors over multi channel detectors up to linear arrays with 128 or 256 pixels. All the detectors can be equipped with nearly any optical filter as well as with IR fibers. |
|
InfraTec is very flexible in the position of the used filters:
- InfraTec can deliver standard detectors with standard optical filters.
- If you need special filters either you may supply the filters or InfraTec may purchase the filters from our suppliers and will offer you a special detector with filters which meet your specifications.
- If you not know which detector/ filter meet your requirements please contact your local InfraTec representative. Together with the InfraTec R&D department they will be glad to present you a solution for your measurement problem. |
|
• Temperature range: -40 to 1200 °C (several models)
• Small sensing head fits where other sensors can’t
• 1% accuracy across the whole temperature range
• 0/4 – 20 mA, 0 – 5 V, J or K thermocouple output
• Ambient head temperatures up to 85°C without cooling
• Interchangeable sensing heads
• Adjustable emissivity, transmissivity, peak hold …
• 5-digit backlit LCD user interface
• Accessories for cooling and air purging
• Optional RS-232 or RS-485 digital communications
• Multidrop Network (max. 32 sensors with RS-485)
• Special models for glass and metals applications
|
|
- One of the smallest infrared sensors worldwide with 20:1 optical resolution for a temperature range from -40 to 900°C
- Rugged and useable up to 180°C ambient temperature without cooling
- Optional USB, RS485, RS232 interface or two relais outputs
- Installation of up to 32 sensors in one network (with RS485)
- Extra set available for hazardous, explosion-prone areas |
|
VTIR-series products are industrial temperature measuring devices using in electric power, metallurgy, petrifaction and other related fields. Digitalized circuit, factory calibration with black body, temperature compensation and linearization with MCU ensures the high accuracy and stable output of this IR sensor with the full measuring range.
VTIR-series products are industrial temperature measuring devices using in electric power, metallurgy, petrifaction and other related fields. |
|
| ... products without technical information |
| |
NDIR Carbon Dioxide - Infared Sensors
Alphasense contemporary designed miniature CO2 infra-red sensors are self-contained, plug in sensors with integrated optics contained within standard sized miniature (20.0 mm) gas sensor housings. There are no moving parts within the sensors. An internal temperature sensor is included to enable the temperature to be monitored at the detectors, thereby providing the best means of compensating for temperature effects, including ideal gas law corrections.
CO2 Gas Ranges
IR-CO2-A1 Carbon Dioxide 0 to 5,000-ppm
IR-CO2-A1 Carbon Dioxide 0 to 5% Volume
IR-CO2-A1 Carbon Dioxide 0 to 20% Volume
IR-CO2-A1 Carbon Dioxide 0 to 100% Volume |
|
The LED based CO2 NDIR sensor is a fast response, low power NDIR CO2 sensor. It uses patented Indium Antimonide technology to produce a solid state source/detector pair. This gives a fast response to changes in gas concentration, and high immunity to ambient light/heat sources.
Carbon Dioxide (CO2) is measured by recording changes in the transmission of mid IR wavelengths around the carbon dioxide absorption peak at 4.26um.
The C20 is fully solid state, using an advanced mid IR LED and photodiode pair.
This eliminates the need for heated filaments entirely.
This sensor produces a temperature compensated, linearised output via a serial line, and is extremely simple to integrate into microcontroller based instruments. |
|
| ... products without technical information |
| |
General description
di-soric infrared distance sensors OAA... are characterised by a large operating distance, while having a very good colour independence.Thanks to the large diameter of light spot uneven surfaces of stones, sintered material or rough boards will be safely detected. Due to that di-soric infrared distance sensors OAA... are especially suitable for height control in concrete and gravel works, brickyards as well as saw mills. Two independently from each other adjustable thresholds enable diverse operation possibilities.
|
|
| It consists of a sensor section, a sensor driving/signal processing circuit and a simple interface, and it can be used for incorporation into a camera or a machine. |
|
Teledyne Imaging Sensors is a world leader in the design and production of large format IR sensors. We produce the largest IR detectors in the world: 2048x2048 format, 18µm pixel pitch arrays based on our proven HAWAII-2RG readout integrated circuit (ROIC). We are supplying NASA's James Webb Space Telescope (JWST) with 4096x4096 mosaic FPAs. JWST will replace NASA's Hubble Space Telescope in the year 2011.
Teledyne Imaging Sensors infrared and visible FPA imager products provide "machine vision," serving the same function as the human retina of the eye - receiving optical images and converting them into electronic signals. Teledyne Imaging Sensors imaging sensor capability far exceeds that of the human eye; imagers are built to see in low light and infrared. Imagers can also be built to detect and determine an objects temperature and chemical composition.
Standard FPA products
Semi-custom products - mating standard readout integrated circuit (ROIC) electronics with custom detectors
Full custom services, optimized to customer requirements
FPAs for a wide range of requirements: large format, high-speed, very-low noise, high-dynamic range, background subtraction, special windowing, and on-FPA signal processing
Robust design for harsh environmental conditions including temperature extremes and radiation exposure |
|
| ... products without technical information |
| |
|
|