|
|
The XC31B series are ultra small CMOS temperature sensor ICs. As a bandgap type temperature sensor is built-into the
XC31B, linearity, in comparison to thermistor type temperature sensors, is much better.
The operating temperature range of the series is from -30°c to +80°c.
The XC31B comes in a mini molded SOT-25 and
USP-6B packages with a supply current of only 7µA
(@VOUT=2.0V) and as such, is suitable for use with various portable devices. Output voltage is selectable in 100mV
increments within a range of 2.0V to 6.0V (at 25°c). |
|
The automation of odd-form component placement is economically justified when a variety of components need to be placed at high production rates. The flexibility of our equipment provides the automation capability of odd-form components even for variable batch sizes and a number of different component shapes to be placed.
|
|
Board level, or PCB-mountable pressure sensors use piezoresistive silicon die technology and are suitable for air or non-corrosive gases for pressure ranges from 1 to 500 PSI. Board level sensors are used for medical applications, air flow, HVAC, leak detection and other test and industrial applications.
|
|
Model 101A
General purpose ICP® pressure sensor, 100 psi, 50 mV/psi, 3/8-24 mtg thd with Jamb Nut, ground isolated
Measurement Range: (for ±5V output) 100 psi (689 kPa)
Sensitivity: (±10mV/kPa) 50 mV/psi (7.3 mV/kPa)
Low Frequency Response: (-5%) 0.5 Hz
Resonant Frequency: >=250 kHz
Electrical Connector: 10-32 Coaxial Jack
Weight: 0.39 oz (11 gm)
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
- PCB Mountable
- Starting Voltage up to 3000 Vrms
- Boost Current Operation for Cold Starts
- For High Pressure Automotive Type Lamps
- Fully Encapsulated for Resistance to Shock, Vibration and Humidity
- Operating Range of -30 to +85 C
- External Control and PWM Dimming |
|
| With the integrated capture, simulation and layout environment of the National Instruments Circuit Design Suite, engineers have a complete PCB design and validation environment. With the integration with NI LabVIEW, measurements can be easily introduced into the design flow, with simulation results improved with real-world data (a concept called virtual prototyping), and the transfer of simulation data to the test environment to compare real vs. theoretical. |
|
| The simplest and saftest system for PCB handling during production, storage and transportation. That modular system fits into the BlackLine container and can be customised for countless applications. |
|
* 30 Series Sub-miniature D.I.L. Relays 1.25 A.
* 32 Series Miniature P.C.B. Relays 6 A
* 34 Series Ultra-slim, P.C.B. Relays 6 A
* 34 Series Ultra-slim, P.C.B. Relays 0.1 - 2 A
* 36 Series Miniature P.C.B. Relays 10 A
* 40 Series Miniature P.C.B. Relays 8 - 10 - 16 A.
* 41 Series Low-Profile P.C.B. Relays 8 - 12 - 16 A.
* 43 Series Low-Profile P.C.B. Relays 10 A.
* 44 Series Miniature P.C.B. Relays 6 -10 A.
* 45 Series Miniature PCB Relays 16 A.
|
|
... see all the products in the category
Relays
|
| Very compact EMI suppression components can directly be mounted on printed circuit boards of low-power office, medical, telecom and IT equipment, DC/DC converters and power supplies etc. Ideal low cost solution for manufacturers who have planned for EMC compliance throughout the equipment design process already. |
|
HPA Conformal Coating
Ref: HPA
Resistant to mould growth
May be removed with solvents such as Ultrasolve (ULS)
UV trace for inspection
Excellent dielectric properties and with a wide temperature range
Approved to US MIL-1-46058C
China Military Approval GJB150 and GJB4 (Naval)
For professional use only
Acrylic Protective Lacquer
Ref: APL
Offers excellent adhesion to all substrates
UV trace for inspection
May be removed with solvents such as Ultrasolve (ULS)
Wide temperature range and good dielectric properties
May be soldered through, allowing for repair
For professional use only
|
|
Flux Remover
Ref: FRC
Non-flammable
Low VOC
Effective %u2018no-clean' fluxes and many water based fluxes and p astes
Rapid cleaning and fast evaporation rate
Residue free
Plastics-safe
|
|
While you understand the importance of accurate identification, you won't tolerate identification that doesn't perform consistently. When a minor identification problem keeps your line from getting back to full production, you lose a very precious commodity; time... and in business, time equals money.
BRADY labels are known for their outstanding performance in harsh environments, highest temperature resistance, solder ball resistance and highest quality print contrast:
* PCB (Printed Circuit Board) identification
* Eprom labels
* inspection arrows
* static awareness
|
|
Model 352C33
High sensitivity, ceramic shear ICP® accel., 100 mV/g, 0.5 Hz to 10k Hz, 10-32 side conn.
Sensitivity: (±10%) 100 mV/g (10.2 mV/(m/s²))
Measurement Range: ±50 g pk (±490 m/s² pk)
Broadband Resolution: (1 to 10000 Hz) 0.00015 g rms (0.0015 m/s² rms)
Frequency Range: (±5%) 0.5 to 10000 Hz
Weight: 0.20 oz (5.8 gm)
|
|
Low-cost, general purpose, industrial ceramic shear ICP® accelerometer
- Sensitivity: (±20%) 100 mV/g (10.2 mV/(m/s²))
- Frequency Range: (±3dB) 30 to 600000 cpm (0.5 to 10000 Hz)
- Measurement Range: ±50 g (±490 m/s²)
- Mounting: Stud
- Electrical Connector: Molded Integral Cable
- Top Exit
- 10-foot (3 meter integral cable)
- NIST Traceable, single-point calibration at 100 Hz
- Intrinsically safe versions available
- Ideal for permanent installations, use in continuous on-line monitoring
systems
- Promotes safety when installed in hazardous or inaccessible locations
- Connect via switch or junction boc for route based collection schemes. |
|
High temperature, Radiation Hardened ceramic shear, charge output accelerometer, 10 pC/g, 5kHz, 10-32 side conn.(-65° to +900°F), supplied with 10 foot (3 meter) hardline cable.
Sensitivity: (±10%) 10 pC/g (1.02 pC/(m/s²))
Measurement Range: ±1000 g pk (±9810 m/s² pk)
Frequency Range: (+5%) 5000 Hz
Temperature Range: -65 to +900 °F (-54 to +482 °C)
Electrical Connector: 10-32 Coaxial Jack
Weight: 1.1 oz (30 gm)
For engines, environmental chambers, gas turbines and radioactive environments. |
|
Model 350A13
Shock, quartz-shear, ICP® accel., 0.5 mV/g, 10k g range, LP filter, 10-32 top conn.
Sensitivity: (±15%) 0.5 mV/g (0.051 mV/(m/s²))
Measurement Range: ±10000 g pk (±98000 m/s² pk)
Frequency Range: (±10%) 0.4 to 7500 Hz
Weight: 0.63 oz (17.9 gm)
|
|
Model 626A04
Seismic, low frequency, ceramic flexural ICP® accel, 10 V/g, 0.03 to 500 Hz, top exit, 2-pin conn.
Broadband Resolution: (1 to 10000 Hz) 0.5 µg (5.0 µm/s²)
Electrical Connector: 2-Pin MIL-C-5015
Electrical Connection Position: Top
Weight: 22 oz (624 gm)
Model 626A34
Seismic, low frequency, ceramic flexural ICP® accel, 10 V/g, 0.03 to 500 Hz, top exit, 3-pin conn.
Broadband Resolution: (1 to 10 kHz) 0.5 µg (5.0 µm/s²)
Electrical Connector: 3-Pin MIL-C-26482
Weight: 22 oz (624 gm)
|
|
|
