|
|
|
Temperature transmitters are fitted with either Pt100 or Pt1000 sensors. Their change in resistance relative to temperature is transformed into an electric output signal or used to control relay contacts.
|
|
Features
- Operating temperature range of -20C to +50C
- 10 kOhm resistance at 25C 10%
- Small size, comformally coated for durability and stability
- Solid nickel wires with Teflon insulation
- Works with all ILX Lightwave Temperature Controllers
The TS-520 is an uncalibrated NTC 10 kOhm leaded thermistor with a baked on phenolic coating for durability and long-term stability. These have solid nickel 30 AWG wires with Teflon insulation to provide insulation when assembled in a heat sink or plate with a lead length of 3 inches (76 mm). They are ideal for measuring the temperature of a laser diode or other component during testing. These devices can be calibrated with accuracies to 0.05C over their temperature range using the Steinhart-Hart model
|
|
Our innovative temperature sensor products include:
Full range of industry-standard temperature sensors and temperature switches
The fastest-growing line of thermal-management products
Temperature sensors with accuracy from 0.5C to 3C
Temperature sensors for accurately measuring temperature of up to six remote diodes, such as those found in industry-standard CPUs, GPU (VGA) and High-density FPGAs and ASICs.
Wide range of temperature sensors with industry-standard bus interfaces: I2C, SMBus, SPI, PWM, Analog, 1-Wire, etc.
The world's most comprehensive line of low-cost thermal switches
Highly integrated temperature sensor solutions for notebook PCs, industrial control and automotive applications
Comprehensive array of temperature sensor application notes
|
|
These sensor families offer a variety of options for measuring most common materials in low temperature (0-1000F / 0-500C) applications.
Standard Features:
- Broad temperature ranges -40 to 932F (-40 to 500C)
- 8-14um operating wavelength
- Line of Site and (optional Laser Sighting Tool)
- D/2 and D/20 optics
- Two-Wire 4-20mA output
- Compact design with a rugged stainless steel enclosure (NEMA 4 / IP65)
- A wide selection of accessories
|
|
HICTS06-03
Application: Using protective ceramic tube for encapsulation, which excellent in resisting water and shake. These sensors can be used in many areas, including medical instrument, intelligent instrument, oven, also be suit for extreme environments measurement.
Sensitive element: Pt 100, Pt200, Pt 500 or Pt 1000 (single or double)
Tolerance: all conform to the requirements of IEC 751
Temperature range: -50--300
Shell:
-- diameter: 3.00 mm, length: 15 mm
-- diameter: 4.00 mm, length:20 mm
-- diameter: 5.00 mm, length:25 mm
-- diameter: 6.00 mm, length:30 mm
Other types can be customized
Wires: 2, 3 and 4-wire or connector
-- length: can be customized
-- type: glass fiber (max temperature 650)
PTFE (Max. temperature 300)
FEP (Max. temperature 250)
Protective grade: all conform to the requirements of IP 54
Option:
-- Protective gradeIpxx
-- Higher precision ( Glass A, DIN1/3DIN1/10)
|
|
VITO temperature measurement systems for gauging temperature and volume
Anybody that wishes to determine the quantity of product present in bulk storage tanks has to take the product temperature into account. After all, temperature is a determining factor for the volume and hence the density of a product. ENRAF offers a comprehensive line of products for accurate temperature measurement. That line ranges from single spot temperature probes to the advanced VITO 16 element multiple thermosensor thermometer (MTT) for temperature and volume measurement.
Virtually the entire range is equipped with ENRAFs well-known VITO interface, which guarantees faultless communication with level gauging systems based on radar or servo technology. The gauging systems can easily be provided with an additional functionality for water bottom measurement. In that way the number of instruments and components in and on the tank is kept to a minimum.
Temperature gauging systems by ENRAF stand out by their reliability and robust design. That assures you not only of high measurement accuracy but also of minimal maintenance cost. Add to that their flexibility and simplicity of installation and you will understand just why so many companies benefit from ENRAF temperature gauges.
|
|
Application: Using protective stainless steel tube for encapsulation, which excellent in resisting oil, water, shake. This kind of product can be used in measuring temperature for common instrument, constant temperature equipment, pipe, etc.
Sensitive element: Pt 100, Pt200,Pt 500 ,Pt 1000 (single or double)
Tolerance: According to DIN EN 60751
Temperature range: For low temperature type: -200--{400
For high temperature type: -50--{1200
Shell:
-- diameter: 3.00 mm to 16 mm
-- thread: all types(NPT, BSPT, BSPP)
-- length: can be customized
Wires: 2, 3 and 4-wire or connector
-- length: can be customized
-- type: metal protective wire (Max. temperature 800)
glass fiber (Max. temperature 650)
PTFE (Max. temperature 300)
FEP (Max. temperature 250)
silica gel (Max. temperature 125)
PVC (Max. temperature 105)
Combine type:
Crimping, tightness, crimping
Thread: all types(NPT, BSPT, BSPP)
Material: Cu, stainless steel
Option:
-- shellfs diameter
-- screening wire
-- higher precision: class A, DIN1/3CDIN1/10
-- screwd wire
-- protective tube
-- protective spring
-- curving stainless steel
-- non protection
|
|
In addition to long-term stability, interchangeability and accuracy, elementary sensors are additionally characterized by small size footprints of only a few square millimeters. The temperature application range, however, is extremely high: from -196 Celsius to +1000 Celsius!
To increase the ease of use in mass production applications, Heraeus Sensor Technology has enhanced the capabilities of elementary sensors. DBS sensors, for example, are equipped with rectangular connecting wires that offer superior directional stability when compared to round wires. The DBS sensors, which are available in several different standard wire lengths, can eliminate the need for expensive extension leads.
Ideas developed by Heraeus Sensor Technology have simplified the need for further processing of SMD sensors. The FC-type SMD sensor, for example, which have no edge-metallization, can be die-bonded on PCBs instead of soldered, saving time and costs for automated manufacturing processes.
|
|
Application: Using protective minisize ceramic tube for encapsulation, which excellent in resisting water and shake. These sensors can be used in many areas, including medical instrument, intelligent instrument, oven, also be suit for extreme environments measurement.
Sensitive element: Pt 100, Pt200, Pt 500 or Pt 1000 (single or double)
Tolerance: all conform to the requirements of IEC 751
Temperature range: -200--300
Shell:
-- diameter: 3.00 mm, length: 15 mm
Other types can be customized
Wires: 2, 3 and 4-wire or connector
-- length: can be customized
-- type:
PTFE (Max. temperature 300)
FEP (Max. temperature 250)
Protective grade: all conform to the requirements of IP 54
Option:
-- Protective gradeIpxx
-- Higher precision ( Glass A, DIN1/3DIN1/10)
|
|
Heraeus Sensor Technology develops, manufactures and markets products whose function is based on structured thin films of platinum (Pt). With such an orientation the company is intentionally positioning itself at the start of the added value chain, i.e. the manufacture of components.
The customers of Heraeus Sensor Technology are generally manufacturers of equipment for process measurement technology, the life science sector, the complete bandwidth of heating, ventilation and air conditioning, or subcontractors for mass markets such as household appliances and motor vehicles, just to name a few as examples.
|
|
Probe for temperature measurement of surfaces, with clamp hole
ASLEC - Study and manufacture of temperature sensors starting from a sensitive element (generally thermister CTN or CTP - Resistance Pt 100 - Thermocouples) electrically welded or to Laser YAG, at the end of a cable and inserted in a metal tube with a resin of filling.
|
|
|
The Ni1000SOT is a nickel thin film resistance temperature detector (RTD) that is suitble for use in contact temperature sensing. The characteristics of the temperature sensor comply with DIN 43760. The Ni1000SOT is manufactured by PVD-depositon on a silicon substrate. The thin film structure is covered by a passivation layer for environmental protection and enhanced stability. The nickel elements are mounted on lead frames and encapsulated in SOT23 packages. This technology allows the production of miniature, low cost, high precision temperature sensors. The Ni1000SOT sensor is qualified for the most demanding automotive applications (including exposure to hot oil) and is suitable for many more applications in harsh environments.
|
|
Measuring range : from 0/+10 Pa to -10 000/+10 000 Pa
Configurable intermediary and central zero ranges
Air velocity and airflow functions
Interchangeable measuring sensor (SPI technology)
Simultaneous display of 1 to 4 parameters
External transmitter unputs (KIMO class 200 and 300) and thermocouple K
2 output 4-20 mA or 0-10 V (4 wires), RS 232, 2 RCR relays 6A/230 Vac
2 visual (dual color LED) and audible (buzzer) alarms
Software, keypad or remote control configuration
MODBUS network RS 485 system (optional)
ABS or ALU IP 65 housing, with or without backlit gaphic display
Mounting with the 1/4 turn system with wall-mount plate
CP301 : -100/+100 Pa
CP302 : -500/+500 Pa
CP303 : -1000/+1000 mbar
CP304 : -10 000/+10 000 mbar
Barbed fittings 5,2 mm
Unit of measurement : Pa, mmH2O, mbar, inWG, mmHG
Power supply : 24 Vac /Vdc, 115 Vac or 230 Vac
Outputs : 2 x 4-20 mA or 2 x 0-10 V
Functions : pressure, air velocity, airflow with Pitot tubes, Debimo and other coefficients, integration of measure, self-calibration, measuring correction factor, temperature compensation : manual or automatic (thermocouple K input).
|
|
| ... products without technical information |
| |
|
|