|
|
Since 1984 B&B Thermo-Technik develop and manufacture successfully temperature probes.
New ideas were always a reason why B&B is one step further than its competitors. Our customers are the focus of our thinking and acting. For them we investigate, analize and realize almost everything in the temperature measurement.
Just send us your inquiry and we will supply you with an detailed offer and the solution for your measuring problem.
A range of standard sensors you will find in our Online-Shop:
www.temperature-shop.eu
There you will also get more information about our range of temperature measuring technics:
- Temperature / Humidity Sensors
- Thermocouple Connectors
- Digital Thermomters
- Infrared Thermomters
- Stationary Pyrometers
- Controllers
- Data Loggers
- Hygrometers
- Transmitters
|
|
|
|
|
|
Thermocouple Assemblies - Components and Descriptions
Conax Technologies thermocouple assemblies represent the culmination of 50 years experience in the design and manufacture of temperature sensors. Conax Technologies thermocouple designs have proven their durability and reliability in applications ranging from large industrial processing plants to highly specialized laboratory testing and validation. Our extensive knowledge of the science of temperature measurement and the physical properties of materials used for sheathing and insulation enables our sales engineers to recommend the most effective solutions to your application needs.
Conax Technologies thermocouple assemblies offer a wide variety of termination styles and mounting fittings, as well as extensive choices in sensor calibration, sheath diameter and sheath material. This section outlines the key choices needed to specify the correct Conax Technologies part description for your needs. In each case, you will be asked to select the:
*sensor calibration
*sheath material and size
*tip configuration
*termination style
*optional mounting configuration
*sheath length
If at any time you require assistance, call 1-800-223-2389.
|
|
In oder to meet with all applications, this new range is composed of thermocouple probes with connection head, heat resisting steel sheath, mounted on cable or malleable mineral insulated, with a measuring range from –40 to +1100°C.
The new range is also composed of Pt100 probes with standard connection head, threaded compression fitting, contact, ambient end, for food industry, penetration and with a measuring range from –40 to +400°C.
A large choice of accessories ( mounting brakets, compression fittings, connectors, cables ….) and converters offered by KIMO allow you to enlarge thermocouple and Pt100 working conditions.
Join our distribution network all over the word....Contact us !
|
|
- Tip-sensitive (260°C) feature fast-responding copper tip in stainless sheath.
- Mineral insulated (600°C): Stable and rugged for demanding industrial environments.
- High temperature (850°C): Laboratory grade precision in an industrial probe.
- Diameters options include 0.125", 4 mm, 0.188", 0.215", 6 mm, 0.250"
- Single and dual elements
- Wide selection of adjustable fittings, thermowells, and connection heads available from stock
- Cut-to-length option lets you adjust probe length in the field
|
|
K, T, J and E Thermocouple Types
Made from Class 1 Tolerance Wire
PFA Insulation. (max. 260°C)
Kapton Insulation (max. 315°C)
Glass Braid Insulation. (max. 480°C)
1 and 2m Lengths Standard
Max Service Temp for Connector Body 220°C
|
|
| ... products without technical information |
| |
Max. Temp: 150°C for Standard Probe
36" Insulated, 26 AWG Stranded Lead Wire
316SS Sheath
1/8, 3/16 and 1/4 " Diameter Sheaths Available
2252 Ohm, 0.2°C Elements Standard, Other 44000 Series Elements Also Available
|
|
- PT100, PT1000, PTC, NTC
- Liquids and gas application
- Brass or St. Steel probe material
- 1/8" to 3/4" male process connection
- Pmax = 50 bar
- Protection class IP65
|
|
General description:
Multi-purpose temperature probe with 2-1/2" (64 mm)-long stainless steel housing.
Use to measure temperature of air, soil, or water. Add up to four probes to a single Leaf & Soil Moisture/Temperature Station. Includes 15' (4.6 m) direct-burial cable.
Compatible with both original Vantage Pro and Vantage Pro2.
|
|
Temperature
The Hydrolab temperature sensor is a 30k ohm variable resistance thermistor. The temperature sensor is included with every Hydrolab sonde.
Features:
- 316 Stainless Steel, 30k ohm thermistor
- Variable resistor
Benefits:
- Provides critical compensation for Dissolved Oxygen, Conductivity, pH, and nutrient sensors
- Compliant with EPA170.1 and SM2550B
|
|
| ... products without technical information |
| |
Since 1984 B&B Thermo-Technik develop and manufacture successfully temperature probes.
New ideas were always a reason why B&B is one step further than its competitors. Our customers are the focus of our thinking and acting. For them we investigate, analize and realize almost everything in the temperature measurement.
B&B Thermo-Technik is specialized in the production of gas analysis probes. Just send us your inquiry and we will supply you with an detailed offer and the solution for your measuring problem.
You will find our range of standard sensors in our Online-Shop:
www.temperature-shop.eu
There you will also get more information about our range of temperature measuring technics:
- Temperature / Humidity Sensors
- Thermocouple Connectors
- Digital Thermomters
- Infrared Thermomters
- Stationary Pyrometers
- Controllers
- Indicators
- Data Loggers
- Hygrometers
- Transmitters
|
|
Conax Technologies retractable Sample Probe Assemblies are used to hot tap or inject into basically any type of liquid or gas stream. Typical applications of a sample probe are gas sampling, oil samplling, oxygen sampling, potable water sampling, waste water sampling, water quality sampling, and water or chemical injection.
Optional materials
Optional materials for the Sample Probe and the Conax Technologies Packing Gland body (wetted components) are available. Refer to the Conax Pressure and Vacuum Sealing Assemblies Catalog #5001C or our website for available options such as:
316L SST
316 NACE SST
316L CRN (gland body only)
Monel 405
Hastelloy C276
Inconel 600
Temperature and Pressure Ratings
Refer to the Conax Technologies Pressure and Vacuum Sealing Assemblies Catalog #5001C for temperature and pressure ratings for static conditions. Pressure ratings are reduced when the sealing gland cap is loosened to allow for the insertion or extraction of the Sample Probe.
|
|
|
|
|
|
Either in environmental related gas analysis like stack testing, continuous emission monitoring (CEM), vehicle emission testing or LEL warning indication and in process applications like combustion efficiency monitoring, boiler trim, ethylene plants or petro chemistry, sample gas needs to be extracted from the gas stream.
It is obvious, that for a reliable analysis the sample gas must be extracted free of ambient gas leaking into the system and at the same time the dew point of the sample must remain stable.
This explains why the sample gas probe is the important interface between the process and the analyser system.
Quality, reliability and low operation cost have been the main targets for the development of this programme. The results are outstanding: the modular design allows application specific combinations in a very price effective manner.
The GAS 222 series of sample probes provides "down to earth" solutions based on advanced modular designs.Depending on the application, a variaty of heated or unheated basis units can be combined with in-situ or downstream filters. The filter material can be chosen from sintered ceramic to sintered stainless steel or even pleated stainless steel. Filters with large surfaces provide long life time. For the in-situ filters a highly efficient blowback system is available at reasonable cost.
Bühler sample gas probes are the best solutions if cost effective installation and low operational cost are a concern!
|
|
|
The Clif Mock sample probe was the first truly isokinetic sampler available for crude oil sampling and is still the most accurate and reliable method for extracting a sample from a pipeline for BS & W analysis. Designed to be used with C-22 Isokinetic Samplers, the CD20 drive units are available in four configurations and are capable of pulse counting, timing, pacing from computer and sending out a "loss-of-signal" alarm. In the last few years, there has been increasing demand for much more elaborate systems. These CLIF MOCK True Cut systems commonly have multiple receptacles for separate products or batching operations and have controllers, which interface with central computer systems.
|
|
The gas sample probes are used for continuous extraction of gases from dust loaden, high temperature or humid processes for the gas analysis.
Unheated, heated, explosion proof and portable versions are available.
Due to its modular design the gas sample probes can be adapted to nearly all process conditions.
.
|
|
| ... products without technical information |
| |
Split-Core Type Transformer for AC Currents Type FEA6049
Perfectly suitable for use in maintenance and monitoring of
electrical systems without interrupting their current supply.
Application oriented design, particularly suitable for
measurement in dense wiring.
Ideal for non-contact control measurements with ALMEMO®
hand-held devices, e.g. for fault currents or at devices with
low current consumption.
|
|
Conducted currents can be measured without making direct contact with the source conductor or metallic surface by means of clamp-on broadband current probes. The BCP-5xx EMC Current Probes are designed to permit field intensity meters, spectrum analyzers, and other 50W impedance instruments to measure quantitative magnitudes of current. Measurements can be made on single and multi-conductor cables, ground and bonding straps, shielded conduits and on coaxial cables. We have 11 models of Broadband Current Probes. Please vist our website for more details. www.AHSystems.com
|
|
| ... products without technical information |
| |
|
Qmax also offers useful accessories like micro grabbers, sharp needle Test probes, miniature Test leads, Board Under Test Power Cables etc. for effective troubleshooting.
|
|
|
Since its introduction, the PrecisionPoint™ VX platform has been the industry standard for dependable test, analysis and rework of your probe cards. The PrecisionPoint VX3 carries on this tradition for today's fine-pitch, small array probe cards. From logic to LCD drivers, the PRVX3 provides the necessary tool set to meet your testing needs for planarity, alignment, Cres, leakage, probe force and more.
|
|
| ... products without technical information |
| |
|
|
|
|
The Series JFM-P FloSen® Airflow Meassuring Probes provide accurate, repeatable measurement of air movement in HVAC ducts. Its patented elliptically-shaped sensor design with improved aerodynamic characteristics outperforms more traditional devices, and overcomes loss of accuracy caused by fluid separation at the sensor body. It is designed to maintain a constant parallel airflow pattern over the static sensing ports for more accurate, steady signals under all duct conditions. The elimination of separation results in a stabilized static pressure signal, helping to eliminate “hunting” during fan control.
FloSen® Airflow Probes utilize a unique in-line groove for total pressure sensing and dual ports for static pressure sensing which produces a higher differential pressure for very low velocity measurements. The total and static pressure measuring points are distributed for equal-area averaging of flows resulting in improved accuracy and reliability. This design permits accurate and stable measurement in highly turbulent flow locations with directional pitch and yaw varying up to 20 degrees without the need for air flow straighteners which restrict airflow and can easily become clogged. The elliptical shape of the FloSen® Airflow Probes allows air to glide unrestricted around the aerodynamically designed sensors and offers the lowest pressure drop of any airflow measuring device available minimizing HVAC operating costs.
The FloSen® Airflow Probes have been designed for easy installation and maintenance. The insertion-style probes can be completely installed from outside the duct.
|
|
|
|
|
|
initial smallest measurable flow rate dependent on type of vane wheel:
in gases 0.2...1.6 m/s; in liquids 0.01...0.1 m/s
terminal flow rate dependent on type of vane wheel:
in gases 3 m/s; 20 m/s; 40 m/s; 80 m/s;120 m/s;
in liquids: 3 m/s; 7.5 m/s; 10 m/s; condition: no cavitation
probe diameter:
16 mm; 25 mm; 25/27 mm and 30 mm
working temperature range:
up to 100° C; 260 °C; 370 °C; 450 °C and 500 °C
maximum working pressure:
up to 10 bar overpressure (higher on demand)
explosion-proof type of protection:
Category 1G, 1D (Zone 0, Zone 20); Category 2G, 2D (Zone 1, Zone 21)
probe tube material:
aluminium, stainless steel, titanium
optional incl. direction indication
optional incl. integr. temperature measurement
special designs on request
====================================================
Compact units for use in Ex-applications:
for gas: Ex II 1/2 G Ex d e [ia] IIC T6 and
for dust: Ex II 1/2 D Ex iaD20/tDA21 IP6x TX
sensor for use in category 1 (Ex-zone 0 rsp. 20)
transducer housing for use in category 2 (Ex-zone 1 rsp. 21)
probe with diameter 25 mm in different lengths between 250 mm and 650 mm
initial smallest measurable flow rate:
in gases 0.3 m/s; in liquids 0.03 m/s
terminal flow rate:
in gases 20 m/s; 40 m/s; 80 m/s; 120 m/s
in liquids: 7,5 m/s; 10 m/s;
condition: no cavitation
working temperature range:
up to 100 °C; 260 °C; 370 °C und 500 °C
|
|
|
|
|
|
design ZG7 (standard sensor):
probe with probe tube diameter of 21.3 mm with sliding probe guide piece for installation in pipelines/ducts; probes with an installation length of 500 mm or 1000 mm,
probe material:
stainless steel for use in non-hazardous areas
design ZG2 (standrard for mobile measurement):
extendable probe with probe tube diameter of 42 mm for greater insertion depths and mobile measurements
design ZG4 (universal sensor):
probe with probe tube diameter of 21.3 mm, with sliding probe guide piece for installation in pipelines/ducts
design ZG5:
probe with probe tube diameter of 21.3 mm, with lapped flange and welded, integral flange
for making contact with the medium
initial smallest measurable value:
approx. 0.5 m/s
terminal measurable value:
40 m/s; 60 m/s and 80 m/s
working temperature range:
-20 °C... 100 °C; 180 °C; 240 °C
maximum working pressure:
3 bar above atmospheric
explosion-proof type of protection:
EEx ia IIC T6 for zones 1 and 0
probe materials:
stainless steel, titanium, tantalum and HASTELLOY
necessary diameter of insertion opening: 42 mm
====================================================
Compact units for use in Ex-applications:
for gas: Ex II 1/2 G Ex d e [ia] IIC T6 and
for dust: Ex II 1/2 D Ex iaD20/tDA21 IP6x TX
sensor for use in category 1 (Ex-zone 0 rsp. 20)
transducer housing for use in category 2 (Ex-zone 1 rsp. 21)
design ZG8:
probe with probe tube diameter of 21.3 mm, with sliding probe guide piece for installation in pipelines/ducts, probes with different lengths from 500 mm up to 2000 mm
|
|
|
|