|
|
|
|
|
|
Measuring range : from 0/+10 Pa to -10 000/+10 000 Pa
Configurable intermediary and central zero ranges
Air velocity and airflow functions
Interchangeable measuring sensor (SPI technology)
Simultaneous display of 1 to 4 parameters
External transmitter unputs (KIMO class 200 and 300) and thermocouple K
2 output 4-20 mA or 0-10 V (4 wires), RS 232, 2 RCR relays 6A/230 Vac
2 visual (dual color LED) and audible (buzzer) alarms
Software, keypad or remote control configuration
MODBUS network RS 485 system (optional)
ABS or ALU IP 65 housing, with or without backlit gaphic display
Mounting with the 1/4 turn system with wall-mount plate
CP301 : -100/+100 Pa (resolution : 0.1 Pa)
CP302 : -500/+500 Pa
CP303 : -1000/+1000 mbar
CP304 : -10 000/+10 000 mbar
• Barbed fittings Ø 5,2 mm
• Unit of measurement : Pa, mmH2O, mbar, inWG, mmHG
• Power supply : 24 Vac /Vdc, 115 Vac or 230 Vac
• Outputs : 2 x 4-20 mA or 2 x 0-10 V
• Functions : pressure, air velocity, airflow with Pitot tubes, Debimo and other coefficients, integration of measure, self-calibration, measuring correction factor, temperature compensation : manual or automatic (thermocouple K input).
Join our distribution network all over the word....Contact us !
|
|
|
|
|
|
ComfortSense
Thermal comfort measurement according to EN 13182, ISO 7736 and ASHRAE standard 113
Dantec Dynamics’ ComfortSense system is designed for research and development of heating and air conditioning systems requiring multi-point measurements of air velocity and temperature. Draught measurements require omnidirectional sensors with a frequency response of at least 2 Hz, which is fulfilled by the present system.
ComfortSense elements
The ComfortSense system consists of a main frame with anemometer circuits for up to 16 probes. The omnidirectional probes measure both air velocity and temperature. Six frames can be connected so that up to 96 probes can be monitored simultaneously. The ComfortSense main frame has a built-in A/D converter with USB 2.0 interface.
Easy-to-use
It is easy for the user to setup a measurement sequence and make a measurement grid with selection of probes from a user library. The software delivers statistical results based on user-defined measurement cycles. The ruggedly designed probes and cables are perfectly suited for large test rooms.
|
|
The Activa Sensor Array provides fl ow,
temperature and pressure signals in a compact
unit that requires only one hydraulic line break.
Each sensor transmits an output signal that is
easily integrated with PCs, PLCs, recorders or
panel displays. Signals can also be transmitted to
Flo-tech’s F6700/F6750 Series digital displays.
|
|
Since 1984 B&B Thermo-Technik develop and manufacture successfully temperature probes.
New ideas were always a reason why B&B is one step further than its competitors. Our customers are the focus of our thinking and acting. For them we investigate, analize and realize almost everything in the temperature measurement.
Just send us your inquiry and we will supply you with an detailed offer and the solution for your measuring problem.
A range of standard sensors you will find in our Online-Shop:
www.temperature-shop.eu
There you will also get more information about our range of temperature measuring technics:
- Temperature / Humidity Sensors
- Thermocouple Connectors
- Digital Thermomters
- Infrared Thermomters
- Stationary Pyrometers
- Controllers
- Data Loggers
- Hygrometers
- Transmitters
|
|
|
|
|
|
Thermocouple Assemblies - Components and Descriptions
Conax Technologies thermocouple assemblies represent the culmination of 50 years experience in the design and manufacture of temperature sensors. Conax Technologies thermocouple designs have proven their durability and reliability in applications ranging from large industrial processing plants to highly specialized laboratory testing and validation. Our extensive knowledge of the science of temperature measurement and the physical properties of materials used for sheathing and insulation enables our sales engineers to recommend the most effective solutions to your application needs.
Conax Technologies thermocouple assemblies offer a wide variety of termination styles and mounting fittings, as well as extensive choices in sensor calibration, sheath diameter and sheath material. This section outlines the key choices needed to specify the correct Conax Technologies part description for your needs. In each case, you will be asked to select the:
*sensor calibration
*sheath material and size
*tip configuration
*termination style
*optional mounting configuration
*sheath length
If at any time you require assistance, call 1-800-223-2389.
|
|
In oder to meet with all applications, this new range is composed of thermocouple probes with connection head, heat resisting steel sheath, mounted on cable or malleable mineral insulated, with a measuring range from –40 to +1100°C.
The new range is also composed of Pt100 probes with standard connection head, threaded compression fitting, contact, ambient end, for food industry, penetration and with a measuring range from –40 to +400°C.
A large choice of accessories ( mounting brakets, compression fittings, connectors, cables ….) and converters offered by KIMO allow you to enlarge thermocouple and Pt100 working conditions.
Join our distribution network all over the word....Contact us !
|
|
- Tip-sensitive (260°C) feature fast-responding copper tip in stainless sheath.
- Mineral insulated (600°C): Stable and rugged for demanding industrial environments.
- High temperature (850°C): Laboratory grade precision in an industrial probe.
- Diameters options include 0.125", 4 mm, 0.188", 0.215", 6 mm, 0.250"
- Single and dual elements
- Wide selection of adjustable fittings, thermowells, and connection heads available from stock
- Cut-to-length option lets you adjust probe length in the field
|
|
K, T, J and E Thermocouple Types
Made from Class 1 Tolerance Wire
PFA Insulation. (max. 260°C)
Kapton Insulation (max. 315°C)
Glass Braid Insulation. (max. 480°C)
1 and 2m Lengths Standard
Max Service Temp for Connector Body 220°C
|
|
Magnetic surface thermocouple
Magnetic surface probe
Calibration Type K.
Measures surface temperature of ferrous materials such as bearings on induction heaters.
Magnet diameter Ø 14mm.
Response time 7 sec.
Maximum temperature at tip 220°C
|
|
|
Conax Technologies offers thermocouple assemblies specifically designed for durability and reliability in applications to 4200˚ F (2315˚ C). Such applications generally involve oxidizing, reducing or inert gas atmospheres that challenge the life of the thermocouple. Numerous options in thermocouple type, sheath materials and termination styles are available. Assemblies can also include adjustable mounting fittings, thermowells and ceramic tubewells.
|
|
Push-in thermocouple probes with terminal head are intended for industrial measurement of high temperatures of hot gases and fluids at pressure ~1 bar. The main applications are combustion control, metal, cement, ceramic and glass industries.
-For measuring temperatures from -200 to +1600 ° C
-K, J, N, S or B type thermocouple
-Mineral insulated or thick-wall protection tube made of
heat-resistant alloy or ceramics
-Variety of terminal heads and connection fittings
-Head-mountable transmitters available — to provide
0-10 V / 4-20 mA or RS485 Modbus RTU communication
|
|
In numerous branches of industry heat-treatment and combustion processes play a decisive role during production and in the quality of the final product.
These applications have one thing in common:
Due to the high temperatures thermocouples are almost always used. Besides the non-precious-metalcontaining ones, mainly types E, J or L, K and N, platinum thermocouples types S, R or B are increasingly being used.
These must be protected against contaminating, corrosive and/or abrasive ambient influences.
For various applications we offer different combinations of ceramic and metallic protection resp. mounting tubes. You will find a list of the designs AM and BM, resp. AMK and BMK, resp. AK and BK, resp. AKK and BKK in our product information ''Straight Thermocouples''.
|
|
|
OMEGA® Exotic Thermocouple Probes are designed for use in extreme temperatures, up to 2315°C (4200°F). These probes utilize either Platinum/Rhodium (types R, S, or B) or Tungsten/Rhenium (types G, C, or D) elements, with a variety of insulations and sheath materials. Depending upon the sheath material selected, these probes may be used in inert, oxidizing, reducing or vacuum conditions. The maximum temperature is based on the lowest max. temperature of the element, insulation and sheath material. Five cold end probe terminations are available: replacement probe, subminiature or standard size ceramic connector, heavy-duty standard size, molybdenum-sheathed nylon connector, or transition joint with 72-inch lead wire.
|
|
Tempsens an ISO 9001 company offers a wide range of temperature sensors used in Glass Industry for accurate temperature measurement.
These are:
- Trilevel Thermocouple
- Simplex/Duplex Thermocouple for Fore Hearth/Distributor
- Glass Level Probes for Level Control,
- Thermocouples for Furnace Crown, Bottom, Regenerators and
- Spout Thermocouples
Features:
- Available in R, S, B type sensors with special coating
- Temperature measuring range of 100° to 1600°C
- Protection sheath of recrystallised alumina KER 710(C-799) tube with hole at one end
- Special hardered platinum thimble.
- Specially established quality system
|
|
HT 4010 High Temperature Thermocouple
High Temperature Thermocouple Assemblies Type K, N and Platinum-Platinum Rhodium Thermocouples R,S and B for temperatures up to 1600 °C or higher with primary and secondary ceramic protection tubes. Depending on the process conditions we supply protection tubes from Kanthal, Silicium-Carbide, Tantalum, Titanium, Hasteloy-alloys, Haynes, Monel etc. for temperature sensing applications like blast or carburizing furnaces, kilns, ovens, galvanising baths and fluegas, where their robust construction ensures long sensor life.
|
|
These industrial thermocouples are used in industrial processes where temperatures are very high.
Thermocouples are protected by one or two ceramic protectors. The choice of the tube material depends on the temperature to be measured and on the working conditions.
Connection to the regulating system is made through a connecting head, generally in aluminium, equiped with a ceramic terminal block or a transmitter.
|
|
Mineral Insulated (MIR and MIT) Sensor
Both the MIR and MIT sensors are manufactured from ready made, stock lengths of stainless steel sheathed, mineral insulated signal or thermocouple wire.
These sensors can be produced in either PT100 RTD or thermocouple formats.
The soft annealed stainless steel sheath is flexible and allows the user to bend and shape the sheath when required. MI´s are available from as small as 0.5mm in diameter, far smaller than is possible with fabricated rigid stems and as such are extremely flexible, though not as robust.
Various diameters and grades of stainless steel are also available to suit process requirements. These sensors are supplied as plain stems with lead wire as standard, alternatively terminal heads are available when required and various process connections to suit.
Sensors are available in single, duplex or triplex formats with resistance thermometers available in 2, 3 or 4 wire connection.
|
|
Integrated Thermopile Module TPMI
Our Thermopile sensors represent the latest development in thermopile technology. The sensors include thermopiles and full signal processing circuit in one tiny TO type housing.
The PerkinElmer TPMI™ thermopile sensor with integrated electronics and optics is the industry's first pre-calibrated, single-housed remote temperature module.
Click here to learn more about our TPMI™
Applications of the TPMI™: automotive climate control, home air conditioning, printer/copier temperature control, microwave ovens, and industrial applications.
|
|
Since 1984 B&B Thermo-Technik develop and manufacture successfully temperature probes.
New ideas were always a reason why B&B is one step further than its competitors. Our customers are the focus of our thinking and acting. For them we investigate, analize and realize almost everything in the temperature measurement.
Just send us your inquiry and we will supply you with a detailed offer and the solution for your measuring problem.
You will find our range of standard sensors in our Online-Shop:
www.temperature-shop.eu
There you will also get more information about our range of temperature measuring technics:
- Temperature / Humidity Sensors
- Thermocouple Connectors
- Digital Thermomters
- Infrared Thermomters
- Stationary Pyrometers
- Controllers
- Indicators
- Data Loggers
- Hygrometers
- Transmitters
|
|
|
Conax Technologies thermocouples are available in a wide range of thermocouple material types and are available in both standard and custom configurations to meet your specific installation requirements, from bare wire for fast response, metal sheath magnesium oxide insulated configurations for vibration/shock environments, to noble metal thermocouples configured with ceramic tubewells for extended life at high temperatures (up to 4,200° F/2300° C), with accuracies to standard or special limits of error.
|
|
|
|
|
|
Examples:
-Screw-in melt thermocouples (90.1090)
for temperatures from -40 to +600°C
available with different thermocouples
with stainless steel thermowell
system insulated or non-insulated
for applications in the plastics industry
Screw-in melt thermocouples are preferred for measuring melt temperatures in the plastics industry. Depending on the requirements, sword-shaped or plane probe tips provide for the ideal measuring conditions. The compensating cables are appropriate for temperatures ranging from -40 to 400°C.
The measuring insert contains standard thermocouples (elements) according to
EN 60 584.
-Push-in thermocouples with compensating cable (90.1105)
for temperatures from 0 to 600°C
available with different thermocouples
with stainless steel protection tube
silicone compensating cable or with metal braiding
also with 90° cable entry
Push-in thermocouples are preferred for measuring temperatures on solids, such as hotplates and welding jaws. Applications include ovens, plant engineering and machinery.
Depending on the version, compensating cables are suitable for use in dry areas within the temperature range -20 to 350°C. The connection of the cable to the protection tube incorporates strain relief. A cable protector is available as an option.
Protection tubes in stainless steel protect the measuring insert from chemical influences and mechanical damage.
The measuring insert is fitted with thermocouples to EN 60 584 and DIN 43 710
|
|
The probe sensing tip is constructed of copper alloy which is twenty times more conductive than stainless steel. The sensors react more quickly to changes and indicate tip temperature instead of stem temperature. The result is better accuracy in thermowells, bearings, and other installations.
- 0.250" diameter is recommended for use in thermowells.
- Copper alloy tip for fast response
- Accurate sensing to 260°C (500°F)
- Non-armor models can be user-shortened
|
|
Application Notes:
Suitable for quick replacement on plants
Can be used on equipment for fast assembly
Tough design for industrial use
Special Options:
Socket instead of plug
Duplex
Diameters between 0.5 and 10.8mm
Reduced tips
Sensors bent to shape
Compression fitting
Weld pads or weld on tips
High vibration schemes
High Temperature plug/socket available to 350 ° C
Ceramic plug/socket available to 500 ° C
Insulated exposed or grounded junction
Tagging
|
|
Type Designation: CTE
Measuring Range: -100 to + 300 ° C
Common Sensor Types: K,J,N,T,E
Common Insulation : PVC, silicon rubber, PTFE, glass fibre
Common Stranding: 1x0.2, 1x0.315, 1x0.5, 7x0.2, 13x0.2
Common Eye Size: M4, M5, M6, M8, M10, BA sizes.
Tail detail: 50mm tails, 10mm tinned
Application Notes:
Good for high volume manufacture and fixing on to original equipment.
Special Options:
Duplex
Insulated or grounded junction
|
|
|
|
|
|
The EL Series is a range of high quality, low cost, miniature sensors which measure the temperature of inaccessible or moving objects and materials.
They measure temperatures from -20°C to 500°C accurately and consistently, with an outstanding response time of 200 ms.
These sensors are available as either 2-wire units with a 4-20 mA output, or 4-wire units with voltage or thermocouple
outputs. This choice of outputs makes the EL series compatible with almost any indicator, controller, recorder or data-logging instrument.
The EL21 has 2:1 optics making it suitable for most applications where the sensor can be mounted close to the target.
The EL101 is designed for small or distant targets and has an optical resolution of 10:1.
The EL301 is designed for very small or distant targets and has an optical resolution of 30:1.
These compact sensors are small enough to fit almost anywhere and their rugged stainless steel housings make them ideal for applications where cleanliness and hygiene are paramount.
The EL Series Sensors are easy to install and will operate in ambient temperatures up to 50°C. For more hostile environments or difficult mounting conditions a wide range of accessories is available.
|
|
TC6M Mineral Oxide Thermocouples for a wide range of industrial applications
Temperature limits:
-40 ... +350°C for type T
-40 ... 750°C for type J
-40 ... 900°C for type E
-40 ... 1000°C for type K (see table for sheath diameters)
Tolerance (IEC standard 584.2/Class 2):
for type T: ± 1°C (-40 ... 133°C) ± 0.0075 [t] (t > 133°C)
for type J, E, K: ± 2,5°C (-40 ... 333°C) ± 0.0075 [t] (t > 333°C)
Mineral insulated (MgO) thermocouple element and continuous metal sheath
Application versatility
|
|
Features
- Designed by Hart’s primary standards design team
- Two sizes available, with or without reference junction
- Calibration uncertainty of ±0.5 °C to 1100 °C, ±3 °C to 1450 °C
|
|
TC with protective armatures
Against chemically and mechanically harsh environments thermocouples are mounted inside protective armatures. The optimum design depends on the individual application.
The alternatives are straight thermocouples, angular thermocouples (preferred for salt baths, metal melting plants, etc.) and thermocouples with exchangeable measuring inserts.
The protection tubes are made of ceramic or metallic highly temperature-resistant materials. The thermocouples are available in different mounting techniques, e.g. screw-in, weld-in or plug-in, with connection flange, or other.
|
|
|
|
|
|
Thermocouple Probes ( Model: K Type TPK-xx / T type TPT-xx )
Bead Probe TPK-01
-50 °C ~ 200 °C / -58 °F ~ 392 °F
Bead Probe TPK-01G Glass Fiber
-50 °C ~ 450 °C / -58 °F ~ 932 ° F
Bead Probe TPK-01-40G
-50 °C ~ 180 °C / -58 °F ~ 356 °F wire diameter
40 gauge for measuring of air temperatures. 4ft. wire
Flat Leaf Surface Probe
-50 °C ~ 300 °C / -58 °F ~ 572 °F
for measuring of surface temperatures.
Model: TPK-02A 0.1 mm thickness (measuring point)
2.0 mm width, L: 84mm (Flat leaf) + 930 mm (Straight Cable)
Model: TPK-02B 0.1 mm thickness (measuring point)
5.0 mm width, L: 84mm (Flat leaf) + 930 mm (Straight Cable)
Probe: TPT-01 ( T Type)
-199 °C ~ 200 °C / -58 °F ~ 392 °F
Bead Probe TPT-01-40G ( T Type)
-50 °C ~ 180 °C / -58 °F ~ 356 °F
Immersion Probe TPK-03
-50 °C ~ 800 °C / -58 °F ~ 1472 °F
General purpose needle
type with stainless point head.
Immersion Probe TPK-03S
-50 °C ~ 800 °C / -58 °F ~ 1472 °F
Surface Probe TPK-04, TPK-04L, TPK-04L Surface
temperature probe.
-50 °C ~ 500 °C / -58 °F ~ 932 °F
Fast response probe.
Air Probe TPK-05
-50 °C ~ 600 °C / -58 °F ~ 1120 °F
Fast response probe.
Roller Probe TPK-06
-50 °C ~ 250 °C / -58 °F ~ 482 °F
Fast response probe.
Magnetized Probe TPK -07
-50 °C ~ 250 °C / -58 °F ~ 482 °F
Fast response probe.
Immersion Probe TPK-03XP
-50 °C ~ 800 °C / -58 °F ~ 1472 °F for measuring temperature of liquids, semi solid such as oils, rubbers, plastics, powder, clays, meats, fruits, frozen foodstuffs.
|
|
|
|
|
|
Watlow provides more than 80 years of manufacturing, research and quality for your temperature sensing needs. A tremendous stock of general application, mineral insulated, base and noble metal thermocouples are available.
Watlow’s MICROCOILTM, Radio Frequency Thermocouple Probe (TR)and True Surface Thermocouples (TST) all incorporate isothermal physical principles to achieve superior surface temperature measurement. The isothermal design provides accurate sensing because the areas of the sensor that are exposed to normal process variances are positioned outside the thermal gradient.
Features
Wide temperature range from -200 to 2200°C (-328 to 4000°F)
Fiberglass insulated thermocouples are capable of temperatures up to
480°C (900°F) for continuous operation
Grounded, ungrounded exposed junctions
Same day delivery on millions of products
Custom manufactured thermocouples
Applications
Plastic injection molding machinery
Food processing equipment
Engine and turbine exhaust gas
Semiconductor processing
Heat treating and metals processing
Medical equipment
Aerospace industries
Packaging equipment
Test stands
|
|
|
|
