|
|
HT 4010 High Temperature Thermocouple
High Temperature Thermocouple Assemblies Type K, N and Platinum-Platinum Rhodium Thermocouples R,S and B for temperatures up to 1600 °C or higher with primary and secondary ceramic protection tubes. Depending on the process conditions we supply protection tubes from Kanthal, Silicium-Carbide, Tantalum, Titanium, Hasteloy-alloys, Haynes, Monel etc. for temperature sensing applications like blast or carburizing furnaces, kilns, ovens, galvanising baths and fluegas, where their robust construction ensures long sensor life.
|
|
|
Mineral Insulated Thermocouples are manufactured from mineral oxide insulated metal sheathed cable. Mineral Insulated Cable consists of thermocouple wire insulated by compacted magnesium oxide surrounded by a metal sheath. TCP's Thermo-Pak M. I. Cable is manufactured to exacting standards from the highest quality materials available to ensure accurate and reliable performance with long life. Mineral insulated thermocouples are more durable, faster responding, longer lasting and capable for use at higher temperatures than ceramic insulator or fiberglass insulated thermocouples because the wires are encased and protected by compacted insulation and the metal sheath. Maximum operating temperatures of thermo-pak manufactured thermocouples are determined by the wire calibration type and the sheath alloy selected.
|
|
Mineral Insulated (MIR and MIT) Sensor
Both the MIR and MIT sensors are manufactured from ready made, stock lengths of stainless steel sheathed, mineral insulated signal or thermocouple wire.
These sensors can be produced in either PT100 RTD or thermocouple formats.
The soft annealed stainless steel sheath is flexible and allows the user to bend and shape the sheath when required. MI´s are available from as small as 0.5mm in diameter, far smaller than is possible with fabricated rigid stems and as such are extremely flexible, though not as robust.
Various diameters and grades of stainless steel are also available to suit process requirements. These sensors are supplied as plain stems with lead wire as standard, alternatively terminal heads are available when required and various process connections to suit.
Sensors are available in single, duplex or triplex formats with resistance thermometers available in 2, 3 or 4 wire connection.
|
|
Application Notes:
Suitable for quick replacement on plants
Can be used on equipment for fast assembly
Tough design for industrial use
Special Options:
Socket instead of plug
Duplex
Diameters between 0.5 and 10.8mm
Reduced tips
Sensors bent to shape
Compression fitting
Weld pads or weld on tips
High vibration schemes
High Temperature plug/socket available to 350 ° C
Ceramic plug/socket available to 500 ° C
Insulated exposed or grounded junction
Tagging
|
|
ME 1053 Mineral Insulated Thermocouple with 3-pin Plug
Mineral insulated Thermocouples are metal sheathed and have magnesiumoxide (MgO) insulation offering a sealed rugged enclosure capable of withstanding not only very high temperatures, pressure but also excessive vibration.
MI sensors are flexible and are available as of 0,25 mm
|
|
- Compact
- Bendible
- Vibration resistant
- Fast response
- Fixed cable, plug as also conncetion head
Applications
Chemical engineering
Petro Chemistry
Food and Beverage
Thermprocess
Boiler
Plast and Fibre
Pulp and paper
Research and Development
Main attributes
Type L to DIN 43710
Type J and K to DIN EN 60 584
Sheath made of 1.4541 (max. 800 °C)
or 2.4816 (max. 1100 °C)
Response time depending from dimensions
T50 from 0,06 s (0.5 mm diam) onwards
|
|
Tempsens produces a range of miniature thermocouples in 0.5mm, 1mm, 1.5mm, and 2mm diameters in mineral insulated formats.These sensors are available with various termination configurations like flying leads, miniature connectors, LEMO connectors, heads etc.
Our miniature section is equipped with 1 laser welding, 2 micro plasma welding and 6 argon welding machines.We have capacity to produce miniature thermocouples more than 10,000 sensors per month.
Features:
- All Products are available in variety of material
- Temperature range -200°C to 1600°C
Application:
- Power Plant
- Glass Industry
- Semi-conductor Industry
- Chemical Industry
- Petrochemical Industry
- Industrial storage tanks
- Oil & Refinery
- Steel Industry
|
|
5500 Series Pencil Thermocouple
Ideal for Applications Under 900°F (480°C)
Small Diameter Thermocouple with Fiberglass Insulation
Used Extensively for Food Application
Commonly Installed with Compression Fittings
Used in a Variety of Industries
Other products available:
|
|
|
|
|
|
Thermocouple & RTDs
Tempsens an ISO 9001:2000 company offers a wide range of Thermocouples and RTDs that are reliable, accurate and fast responding.
Tempsens Thermocouples are available as
o Base Metal Thermocouples (Type J, K, T, E, N),
o Noble Metal Thermocouples (Type R, S, B) and
o Special Thermocouples such as Squzeed Thermocouple, miniature sensors, vibration proof sensors, Trilevel Thermocouple, multipoint sensors, high accuracy sensors, Coated Thermocouple, Thermocouples with Thermowells.
Features of thermocouples
- Temperature range -200°C to 1700°C
- Simplex/Duplex/Multipoint configuration
- Protection sheath of SS316, SS310, HRS446, inconel, Monel, ceramic 99.7% Allumina, silicon carbide etc. depending on the application.
Tempsens RTDs Features:
- Temperature range 0°C to 400°C, special sensors upto 850 deg C can be provided
- Accuracy available in class A, B, 1/2,1/3, 1/5, and 1/10 Din
- Wire connection 2, 3, 4
- Outer protection sheath of SS304, SS316,SS310, inconel
- Special RTDs such as Slide shoe RTD, RTD with Thermowells, Vibration proof RTD for DG sets, Bearing & Winding Temperature RTDs are also available.
Application:
%uF076 Power Plant
%uF076 Oil & Refinery
%uF076 Gas Plant
%uF076 Steel Industry
%uF076 Water Lining
|
|
PT100 – Temperature probes Part No.: 3173-..
- 4-wire DIN A temperature probe, -50° C..+120°C
- Screw-in probe R1/8", stainless steel
- Sensor diameter 3 mm
- Sensor length 24 mm
|
|
WORM Flexible Temperature Sensor
Unlike straight temperature sensors, our WORM flexible RTD and thermocouple temperature sensors bend and slide right into a thermowell without having to remove the enclosure or assembly components.
|
|
Type Designation: CTE
Measuring Range: -100 to + 300 ° C
Common Sensor Types: K,J,N,T,E
Common Insulation : PVC, silicon rubber, PTFE, glass fibre
Common Stranding: 1x0.2, 1x0.315, 1x0.5, 7x0.2, 13x0.2
Common Eye Size: M4, M5, M6, M8, M10, BA sizes.
Tail detail: 50mm tails, 10mm tinned
Application Notes:
Good for high volume manufacture and fixing on to original equipment.
Special Options:
Duplex
Insulated or grounded junction
|
|
Thermocouples can measure temperatures over wide ranges, inexpensively. They are very rugged, but they are not as accurate as RTDs and thermistors.
A thermocouple is basically two strips of wires of dissimilar metals. These metal wires are joined at one end and the voltage is measured at the other end. Changes in the temperature at the juncture induce a change in electromotive force (emf) at the other end. As the temperature goes up, this output emf of the thermocouple rises, though not necessarily linearly.
|
|
ATEX or PED pyrometer assemblies
Different ranges of temperature assemblies specially developed for the chemical and petrochemical industries.
Temperature assemblies with or without thermowell
IP54 to IP67 ingress protection
Simple protection or EEx "i", "e" or "d" safety protection
DAN, DAN V, PSX V type connection head, etc.
J thermocouple from -20 °C to +700 °C
K thermocouple from 0 °C to 1,100 °C
Other types available as an option: T, N, R, S, B, W
Standard material - 316L stainless steel. Various materials and coatings available as an option
ATEX and PED directives: see the ATEX/PED and EMC chapter, on the right-hand side of the home page.
|
|
Predection tube Form AM, AK, B, BM, MA
Measuring range -200.. +570 up to -200... 1600 °C
Connection G1/2, sliding flange
Material of predective tubes steel, st. st., ceramics
Sensor FeCu-Ni, NiCr-Ni, class 2
Option head mounted transmitter 4-20 mA
|
|
- Thermocouple Type J, K, S
- Protection tube made from heat resistant steel
- or from ceramics
- Easy transmitter mounting in high doomed connection head
Applications
Dryer, heater,
Recuperators
Boiler, Energy
Chemical engineering
Combustion processes
up to 1600 °C
Main attributes
Rugged
Meets DIN EN 60 584 for thermovoltages
Class 2
Long duration
Various sizes
|
|
Magnetic surface thermocouple
Magnetic surface probe
Calibration Type K.
Measures surface temperature of ferrous materials such as bearings on induction heaters.
Magnet diameter Ø 14mm.
Response time 7 sec.
Maximum temperature at tip 220°C
|
|
These industrial thermocouples are used in industrial processes where temperatures are very high.
Thermocouples are protected by one or two ceramic protectors. The choice of the tube material depends on the temperature to be measured and on the working conditions.
Connection to the regulating system is made through a connecting head, generally in aluminium, equiped with a ceramic terminal block or a transmitter.
|
|
|
Mineral insulated thermocouples are widely used for temperature measurement in many applications. To their essential characteristics -sensing element, insulation, protecting sheath material and connection- those thermocouples add unique properties such as bending possibilities (to suit any environment) and a wide range of dimensions (from miniaturization to great lengths). The bare ends termination offers flexible and direct connection possibilities.
|
|
|
|
|
|
Measuring range : from 0/+10 Pa to -10 000/+10 000 Pa
Configurable intermediary and central zero ranges
Air velocity and airflow functions
Interchangeable measuring sensor (SPI technology)
Simultaneous display of 1 to 4 parameters
External transmitter unputs (KIMO class 200 and 300) and thermocouple K
2 output 4-20 mA or 0-10 V (4 wires), RS 232, 2 RCR relays 6A/230 Vac
2 visual (dual color LED) and audible (buzzer) alarms
Software, keypad or remote control configuration
MODBUS network RS 485 system (optional)
ABS or ALU IP 65 housing, with or without backlit gaphic display
Mounting with the 1/4 turn system with wall-mount plate
CP301 : -100/+100 Pa (resolution : 0.1 Pa)
CP302 : -500/+500 Pa
CP303 : -1000/+1000 mbar
CP304 : -10 000/+10 000 mbar
• Barbed fittings Ø 5,2 mm
• Unit of measurement : Pa, mmH2O, mbar, inWG, mmHG
• Power supply : 24 Vac /Vdc, 115 Vac or 230 Vac
• Outputs : 2 x 4-20 mA or 2 x 0-10 V
• Functions : pressure, air velocity, airflow with Pitot tubes, Debimo and other coefficients, integration of measure, self-calibration, measuring correction factor, temperature compensation : manual or automatic (thermocouple K input).
Join our distribution network all over the word....Contact us !
|
|
|
|
|
|
ComfortSense
Thermal comfort measurement according to EN 13182, ISO 7736 and ASHRAE standard 113
Dantec Dynamics’ ComfortSense system is designed for research and development of heating and air conditioning systems requiring multi-point measurements of air velocity and temperature. Draught measurements require omnidirectional sensors with a frequency response of at least 2 Hz, which is fulfilled by the present system.
ComfortSense elements
The ComfortSense system consists of a main frame with anemometer circuits for up to 16 probes. The omnidirectional probes measure both air velocity and temperature. Six frames can be connected so that up to 96 probes can be monitored simultaneously. The ComfortSense main frame has a built-in A/D converter with USB 2.0 interface.
Easy-to-use
It is easy for the user to setup a measurement sequence and make a measurement grid with selection of probes from a user library. The software delivers statistical results based on user-defined measurement cycles. The ruggedly designed probes and cables are perfectly suited for large test rooms.
|
|
The Activa Sensor Array provides fl ow,
temperature and pressure signals in a compact
unit that requires only one hydraulic line break.
Each sensor transmits an output signal that is
easily integrated with PCs, PLCs, recorders or
panel displays. Signals can also be transmitted to
Flo-tech’s F6700/F6750 Series digital displays.
|
|
Conax Technologies high pressure special limits of error type J thermocouple temperature sensor assemblies have proven their durability and reliability in a variety of high pressure and high temperature environments. Our extensive knowledge of the science of temperature measurement and the physical properties of materials, enables our engineers to recommend the most effective solutions for your application needs. Conax has the in-house equipment to proof pressure test and certify units for these extreme applications.
High Pressure Special Limits of Error Type J Thermocouple:
*316SST Sheath and High Pressure Tube Connector Fitting
*Design conditions: 40,000 PSI @ 600°F
*Proof Pressure Tested to 60,000 PSI @ 68°F (20°C)
|
|
Conax Technologies Type J Thermocouple temperature sensor assemblies have proven their durablility and reliability in a variety of high pressure and high temperature environments. Our extensive knowledge of the science of temperature measurement and the physical properties of materials, enables our engineers to recommend the most effective solutions for your application needs. Conax has the in-house equipment to proof pressure test and certify units for these extreme applications.
High Pressure Special Limits of Error Type J Thermocouple:
*Hastelloy C276 sheath and high pressure tube connector fitting
*Design conditions: 20,000 PSI @ 400°F
*Proof Pressure Tested to: 30,000 PSI @ 68°F (20°C)
|
|
| ... products without technical information |
| |
|
|
