|
|
Since 1984 B&B Thermo-Technik develop and manufacture successfully temperature probes.
New ideas were always a reason why B&B is one step further than its competitors. Our customers are the focus of our thinking and acting. For them we investigate, analize and realize almost everything in the temperature measurement.
Just send us your inquiry and we will supply you with an detailed offer and the solution for your measuring problem.
A range of standard sensors you will find in our Online-Shop:
www.temperature-shop.eu
There you will also get more information about our range of temperature measuring technics:
- Temperature / Humidity Sensors
- Thermocouple Connectors
- Digital Thermomters
- Infrared Thermomters
- Stationary Pyrometers
- Controllers
- Data Loggers
- Hygrometers
- Transmitters
|
|
|
|
|
|
Thermocouple Assemblies - Components and Descriptions
Conax Technologies thermocouple assemblies represent the culmination of 50 years experience in the design and manufacture of temperature sensors. Conax Technologies thermocouple designs have proven their durability and reliability in applications ranging from large industrial processing plants to highly specialized laboratory testing and validation. Our extensive knowledge of the science of temperature measurement and the physical properties of materials used for sheathing and insulation enables our sales engineers to recommend the most effective solutions to your application needs.
Conax Technologies thermocouple assemblies offer a wide variety of termination styles and mounting fittings, as well as extensive choices in sensor calibration, sheath diameter and sheath material. This section outlines the key choices needed to specify the correct Conax Technologies part description for your needs. In each case, you will be asked to select the:
*sensor calibration
*sheath material and size
*tip configuration
*termination style
*optional mounting configuration
*sheath length
If at any time you require assistance, call 1-800-223-2389.
|
|
In oder to meet with all applications, this new range is composed of thermocouple probes with connection head, heat resisting steel sheath, mounted on cable or malleable mineral insulated, with a measuring range from –40 to +1100°C.
The new range is also composed of Pt100 probes with standard connection head, threaded compression fitting, contact, ambient end, for food industry, penetration and with a measuring range from –40 to +400°C.
A large choice of accessories ( mounting brakets, compression fittings, connectors, cables ….) and converters offered by KIMO allow you to enlarge thermocouple and Pt100 working conditions.
Join our distribution network all over the word....Contact us !
|
|
- Tip-sensitive (260°C) feature fast-responding copper tip in stainless sheath.
- Mineral insulated (600°C): Stable and rugged for demanding industrial environments.
- High temperature (850°C): Laboratory grade precision in an industrial probe.
- Diameters options include 0.125", 4 mm, 0.188", 0.215", 6 mm, 0.250"
- Single and dual elements
- Wide selection of adjustable fittings, thermowells, and connection heads available from stock
- Cut-to-length option lets you adjust probe length in the field
|
|
K, T, J and E Thermocouple Types
Made from Class 1 Tolerance Wire
PFA Insulation. (max. 260°C)
Kapton Insulation (max. 315°C)
Glass Braid Insulation. (max. 480°C)
1 and 2m Lengths Standard
Max Service Temp for Connector Body 220°C
|
|
Magnetic surface thermocouple
Magnetic surface probe
Calibration Type K.
Measures surface temperature of ferrous materials such as bearings on induction heaters.
Magnet diameter Ø 14mm.
Response time 7 sec.
Maximum temperature at tip 220°C
|
|
| ... products without technical information |
| |
•High-speed response time 100ms/ 90%
•Waterproofing ability in compliance with IP67
•High heat resistance up to 70°C of ambient temperature
•High noise resistance and accurate temperature measurement with stable operation due to SUS body and silicon lens
•Analog output of 4-20mA highly resistant to noise
•Cylindrical shape enabling installation in a limited space
•Temperature measurement range: 0-400°C (SA-80T-4A)
•Area size: φ80mm/ 500mm
|
|
|
|
|
|
thermoMETER: Precise non-contact temperature measurement from -40 to 1,800°C
The thermoMETER product group is targeted at industrial users. The infrared sensors comprise eleven products for stationary use. Amongst others, this includes products such as thermoMETER CT, which has external electronics. This sensor operates in temperatures from -40°C up to +975°C. This also includes the CT laser, which uses an integrated laser optical system to mark actual spot sizes at every distance. The CTglass version of this laser sensor is designed for use in glass production. The miniature sensors in the thermoMETER CS and CS micro series have integrated electronics located in the sensor head in the case of theCS, and directly integrated in the cable for the CS micro. This is particularly beneficial if space is restricted. The range also includes special sensors for use at high ambient temperatures of up to 250°C and for very high object temperatures of up to 1,800°C. A sensor with a response time of less than 3ms is also available very fast processes. To round off the range, an extensive list of accessories are provided for all sensors. These include various optical systems, air purge units, mounting aids and solid cases.
|
|
|
ATI Models Q45H62 and Q45H63 are reagentless and designed for on-line monitoring and control of chlorination systems. It is available in two versions: a free chlorine monitor for drinking water and cooling water, and a combined chlorine monitor ideally suited for “chloraminated” drinking water. The combined chlorine system can also be used in wastewater effluents where sufficient ammonia is present prior to chlorination to result in a predominantly monochloramine residual. Unlike on-line colorimetric and most amperometric monitors, Q45H systems utilize a membrane-covered polarographic sensor that does not require the addition of chemical reagents. The Q45H system has no moving parts, so there are no pumps or motors that burn out or tubing breaks that create maintenance nightmares. All normal maintenance items are included with each system.
|
|
|
EX900 Kit Complete with ExStik® Chlorine meter, pH electrode, ORP electrode, protective sensor cap, 5 packs of 10 reagent tablets (50 tests), 5 plastic sample cups, weighted stand, pH 4, 7 & 10buffer packs, four SR44 button batteries, carrying case, and neckstrap
|
|
Double-channel measuring and control instrument for free chlorine and pH-Value - additionaly ORP optional
- Double measurement of free chlorine and pH -optionally with additional ORP measurement
- Easy and safe operation by plain text menu guidance
- Log book function
- Graphical trend display of the last 3 h
description
The dialog W 2 CL2 PR R is a sophisticated instrument for the precise measurement and control of the chlorine concentration and the pH-value - additionally an ORP measurement is optional. It is available in a wall mounted housing.
|
|
The PCA 330 series of analyzers check pH/ORP and chlorine levels in applications such as pools and spas, drinking water and influent and effluent discharge of water to ensure public safety, prevent waste and protect the environment by reducing overdosage.
Features:
• pH regulation with both ON/OFF and proportional controls
• Separate alarms can be set for pH and chlorine controls
• Parameters can be sent through SMS
• Large graphical display with backlight
• User-friendly interface
• Can store up to 3500 data, that can be displayed or downloaded to a PC
|
|
| ... products without technical information |
| |
|
ATI Models Q45H62 and Q45H63 are reagentless and designed for on-line monitoring and control of chlorination systems. It is available in two versions: a free chlorine monitor for drinking water and cooling water, and a combined chlorine monitor ideally suited for “chloraminated” drinking water. The combined chlorine system can also be used in wastewater effluents where sufficient ammonia is present prior to chlorination to result in a predominantly monochloramine residual. Unlike on-line colorimetric and most amperometric monitors, Q45H systems utilize a membrane-covered polarographic sensor that does not require the addition of chemical reagents. The Q45H system has no moving parts, so there are no pumps or motors that burn out or tubing breaks that create maintenance nightmares. All normal maintenance items are included with each system.
|
|
|
EX900 Kit Complete with ExStik® Chlorine meter, pH electrode, ORP electrode, protective sensor cap, 5 packs of 10 reagent tablets (50 tests), 5 plastic sample cups, weighted stand, pH 4, 7 & 10buffer packs, four SR44 button batteries, carrying case, and neckstrap
|
|
Double-channel measuring and control instrument for free chlorine and pH-Value - additionaly ORP optional
- Double measurement of free chlorine and pH -optionally with additional ORP measurement
- Easy and safe operation by plain text menu guidance
- Log book function
- Graphical trend display of the last 3 h
description
The dialog W 2 CL2 PR R is a sophisticated instrument for the precise measurement and control of the chlorine concentration and the pH-value - additionally an ORP measurement is optional. It is available in a wall mounted housing.
|
|
The PCA 330 series of analyzers check pH/ORP and chlorine levels in applications such as pools and spas, drinking water and influent and effluent discharge of water to ensure public safety, prevent waste and protect the environment by reducing overdosage.
Features:
• pH regulation with both ON/OFF and proportional controls
• Separate alarms can be set for pH and chlorine controls
• Parameters can be sent through SMS
• Large graphical display with backlight
• User-friendly interface
• Can store up to 3500 data, that can be displayed or downloaded to a PC
|
|
| ... products without technical information |
| |
|
|
|
|
|
The TempTrackr™ Multipoint System provides a batteryless, non-invasive and low cost temperature measurement solution that is ideally suited for applications ranging from High Power Switches to Rotating Machine Components. The Starter Kit is designed to showcase the capabilities of the TempTrackr™ Multipoint System. Each Kit includes three batteryless wireless temperature sensors that are capable of reading temperatures between 0°C and 120°C. The three sensors provide the ability to monitor temperature at multiple points of interest. The Surface Acoustic Wave (SAW) resonator within each sensor is powered by bursts of electromagnetic radiation emitted by a wireless reader (also known as a wireless interrogation unit). A feedback signal, conditioned by the temperature to which the resonator is exposed, is then electromagnetically transmitted to the wireless reader where it is processed for temperature measurement. The TempTrackr™ Multipoint System is capable of tracking up to six sensors and can provide temperature data via the CAN communication protocol. The number of sensors can be extended to 12 by making use of multiple interrogation antennae. The Starter Kit is an ideal technology evaluation tool3. SenGenuity will work closely with you to adapt the TempTrackr™ Multipoint System to meet the specific needs and requirements of your application.
|
|
Wireless-based high-precision, 8-channel temperature measurement module;
requires WLS-IFC wireless gateway device
- 8 temperature input channels
- Supports thermocouples, RTDs, thermistors, and semiconductor temperature devices
- Superior performance - accuracy exceeds sensor output
- 8 digital I/O bits; user-configurable for alarming
- 802.15.4 wireless protocol
- Range: Up to 150 feet indoors, 2400 feet outdoors
- Included Software: TracerDAQ™, Universal Library, Universal Library for LabVIEW, and InstaCal
- Lifetime Warranty & Harsh Environment Warranty® included
|
|
The Radio Printer is part of a wireless system for temperature monitoring and control. It is made up by one or more temperature sensor-transmitters, like the TempStick Radio, and a radio receiver, the Radio Printer itself. It has everything it needs to work and doesn't require any PC or software : the display allows to configure the acquisitions and the printer to store easily and quickly all the stored data.
- no need of a PC nor software;
- graphic and alphanumerical LCD display;
- LED and sound alarms for thresholds set by the operator;
- display values for each sensor and all data recorded;
- rechargeable batteries and external power supply.
Applications:
stock houses and warehouses monitoring;
fridges and fridge cells monitoring;
environment monitoring;
computer rooms control;
laboratories monitoring;
transport monitoring;
catering services;
HACCP compliance temperature monitoring;
ISO compliance temperature monitoring.
|
|
|
|
|
|
|
The TempTrackr™ Multipoint System provides a batteryless, non-invasive and low cost temperature measurement solution that is ideally suited for applications ranging from High Power Switches to Rotating Machine Components. The Starter Kit is designed to showcase the capabilities of the TempTrackr™ Multipoint System. Each Kit includes three batteryless wireless temperature sensors that are capable of reading temperatures between 0°C and 120°C. The three sensors provide the ability to monitor temperature at multiple points of interest. The Surface Acoustic Wave (SAW) resonator within each sensor is powered by bursts of electromagnetic radiation emitted by a wireless reader (also known as a wireless interrogation unit). A feedback signal, conditioned by the temperature to which the resonator is exposed, is then electromagnetically transmitted to the wireless reader where it is processed for temperature measurement. The TempTrackr™ Multipoint System is capable of tracking up to six sensors and can provide temperature data via the CAN communication protocol. The number of sensors can be extended to 12 by making use of multiple interrogation antennae. The Starter Kit is an ideal technology evaluation tool3. SenGenuity will work closely with you to adapt the TempTrackr™ Multipoint System to meet the specific needs and requirements of your application.
|
|
Wireless-based high-precision, 8-channel temperature measurement module;
requires WLS-IFC wireless gateway device
- 8 temperature input channels
- Supports thermocouples, RTDs, thermistors, and semiconductor temperature devices
- Superior performance - accuracy exceeds sensor output
- 8 digital I/O bits; user-configurable for alarming
- 802.15.4 wireless protocol
- Range: Up to 150 feet indoors, 2400 feet outdoors
- Included Software: TracerDAQ™, Universal Library, Universal Library for LabVIEW, and InstaCal
- Lifetime Warranty & Harsh Environment Warranty® included
|
|
The Radio Printer is part of a wireless system for temperature monitoring and control. It is made up by one or more temperature sensor-transmitters, like the TempStick Radio, and a radio receiver, the Radio Printer itself. It has everything it needs to work and doesn't require any PC or software : the display allows to configure the acquisitions and the printer to store easily and quickly all the stored data.
- no need of a PC nor software;
- graphic and alphanumerical LCD display;
- LED and sound alarms for thresholds set by the operator;
- display values for each sensor and all data recorded;
- rechargeable batteries and external power supply.
Applications:
stock houses and warehouses monitoring;
fridges and fridge cells monitoring;
environment monitoring;
computer rooms control;
laboratories monitoring;
transport monitoring;
catering services;
HACCP compliance temperature monitoring;
ISO compliance temperature monitoring.
|
|
|
|
|
|
TEMPpoint™ is a series of temperature measurement instruments designed for high accuracy and industrial robustness. TEMPpoint utilitzes ISO-Channel™ front end architecture to eliminate common mode noise and ground loops through 1000V channel to channel galvanic isolation. These instruments allow direct thermocouple, RTD, and precision voltage or resistance measurements with a PC. Temperature and voltage values can be viewed, graphed, or exported to Excel, and allow limit checking for control or monitoring of a manufacturing process. USB and Ethernet (LXI) versions are available with 8, 16, 24, 32, 40, or 48 channels
TEMPpoint Ethernet (LXI) Instruments for Thermocouples
DT8871U: Highly Accurate Thermocouple Temperature Measurement Instruments
* 8 to 48 simultaneous differential inputs per instrument
* Connect any thermocouple or voltage directly at the front panel
* Galvanic Isolation Channel-to-Channel ±500V
* TEMPpoint datalogger application, programming examples, and web-based application included
|
|
Type Designation: FMH
Temperature Range: 0 to 1400 ° C
Common Materials: See below
Common Size: Ø 6.0mm to 26.7mm (3/4" nominal bore)
Application Notes:
Assembly component (with sensor)
Replacement sheath
Often has adjustable flange or compression fitting
High temperature
Fast response
Will withstand tough industrial use
Special Options:
Special materials available on request
Wear and Chemical resistant coatings
Ceramic lining sheath for rare metal thermocouples
Sleeve can be formed into right angle
Hygienic designs
Process fittings
Reduced tip options
Pressure testing
Material Certificates
|
|
|
|
|
|
Mobile Measurement kit FM-1-B FLUID-CHECK in suitcase for :
- Flow rate sensors
- Leakage sensors
- Temperature sensors
- Pressure sensors
Examples for :
Fixed displacement pumps Pumping capacity
Variable capacity pumps Percentage of leak oil
Oil coolers Flow characteristics
Water coolers
Differential cylinders Leak oil
Synchronous cylinders Sealing damages
Plunger cylinders Moving speed
Oil motors Leak oil
Pressure accumulators Bladder control
Charging behaviour
Nitrogen charge
Technical Data :
- With multi-purpose display with one separate analogue input, with
4 – 20 mA and scaling facility
- Suitable for display of input channel A or input channel B as well as the sum A+B, the differential A-B or the ratio A:B
- Display range +/- 4 1/2 decades at 15 mm size
- Power supply 115 / 230 VAC or 18 – 30 VDC
- Setup of zero and full scale by means of two front keys and
menu support
- Selectable linearisation functions
Included :
- Power cord 230V AC
- Connecting cable with plug
M12 connector for kit and sensors
- Suitcase made of plastic (black/blue)
Outer dimension 340 x 275 x 84 mm
- Technical documentation and operating instructions
|
|
|
|
|
|
Mobile Measurement kit FM-1-B FLUID-CHECK in suitcase for :
- Flow rate sensors
- Leakage sensors
- Temperature sensors
- Pressure sensors
Examples for :
Fixed displacement pumps Pumping capacity
Variable capacity pumps Percentage of leak oil
Oil coolers Flow characteristics
Water coolers
Differential cylinders Leak oil
Synchronous cylinders Sealing damages
Plunger cylinders Moving speed
Oil motors Leak oil
Pressure accumulators Bladder control
Charging behaviour
Nitrogen charge
Technical Data :
- With multi-purpose display with one separate analogue input, with
4 – 20 mA and scaling facility
- Suitable for display of input channel A or input channel B as well as the sum A+B, the differential A-B or the ratio A:B
- Display range +/- 4 1/2 decades at 15 mm size
- Power supply 115 / 230 VAC or 18 – 30 VDC
- Setup of zero and full scale by means of two front keys and
menu support
- Selectable linearisation functions
Included :
- Power cord 230V AC
- Connecting cable with plug
M12 connector for kit and sensors
- Suitcase made of plastic (black/blue)
Outer dimension 340 x 275 x 84 mm
- Technical documentation and operating instructions
|
|
|
|
see the results for the following category : 
