|
|
Screw-clamp feed-through terminal blocks, CBC Series, polyamide insulating body, UL94V-0 flame behaviour, reduced overall dimension, cross-connections (PTC) by ?Easy bridge? patented system, with no need of additional protection.
To be mounted onto TH35 - 7.5; TH35 ? 15 type rail, according to IEC 60715.
|
|
SCREW TYPE TERMINAL BLOCKS ( AVK )
AVK type screw terminals are manufactured from thermoplastic raw material.Grey as being the main colour , 6 different colours give users chance for grouping.
DIFFERENT TYPES OF SCREW TERMINAL BLOCKS ARE AS BELOW;
Standard Feed Through Terminals
Multi Level Terminals
Fuse Terminals
Fuse and Disconnect Terminals
Test and Disconnect Terminals
One-input-two-output Terminals
High Current Terminals
Distribution Terminals
Sensor Terminals
|
|
RIA CONNECT’s RIACON product series consists of pluggable and solderable screw type terminal blocks.The terminal bodies are made of copper alloy - RIA does not use wrapped terminal bodies. The surface is electro-nickel plated. Versions with soldering pins are initially electro-nickel-plated, and then hot-dip galvanized to achieve high resistance to corrosion and outstanding soldering properties.
All terminal bodies are captive in their moldings.
Terminal screws sizes M2, M3 and M3.5 are made of different materials, varied upon needs. The bottom surfaces are rounded off, permitting leads to be connected without wire protectors.
All screws are hot-dip galvanized, 4 µm nickel plating over 8 µm copper to provide a better protection against corrosion. The screws are usually secured in a fashion as to prevent them from working loose during shipment.
|
|
Differents kinds and possibles uses:
- Single Level
- Multiple Connection
- Double Level
- Triple Level
- Distribution Blocks
- Micro
- Modular Panel Mount
- Single Level Fuse
- Double Level Fuse
- Disconnect & Test
- Thermocouple
- Earthing
- Neutral/Earth Clamp
- Corrosive/Explosive Env.
|
|
|
For all cable-to-board connections relevant to maintainance, large variety of types. Lead sections up to 4.0 mm². For signal and load currents up to 15 A, pitch 3.5 mm, 3.81 mm, 5.0 mm, 5.08 mm, 7.5 mm and 10.0 mm (.138", .150", .197", .200", .295" and .394").
|
|
Heyco® Standard Appliance
Terminal Blocks
Screw to Screw
Features
Allows standardization of the SOLID WIRE Cordset. Input and output wires are always secured with a screw.
Modern low profile design occupies less "real estate" inside the appliance.
No exposed metal parts. "Dead front" designed safety.
Pressure clamp connectors are supplied in the open position, ready to accept single or multiple solid conductors.
To meet European requirements, your application may need a terminal block between the power supply cord and internal electricals.
All sizes are rated at 300 volts (450 volts in Europe).
Metal parts feature galvanized steel screws and Ni or tin plated brass inserts.
Available in 94V-0 flame retardant (FR), glass-filled 6/6 Nylon material.
Material Temperature Index: 284°F (140°C), except TB 3B- 338°F (170°C).
Consult Heyco for other pole configurations.
|
|
Optimum contact ensured through the patented and renowned clamping yoke system which is based on the classical increase of force of the screw. Requring only small effort, the screw thread produces high contact power.
A high contact force is only effective when continuously excerted on the conductor. The Weidmüller clamping yoke system works as follows: When the clamping screw is tightened, the resultant force causes the upper thread overlap to spring open, thus causing a locking action to be exerted on the screw. Movement of the connected conductor is compensated by the elastic behaviour of the clamping yoke.
Result:
The connection is vibration-resistant and makes retightening of the clamping screw unnecessary.
|
|
| ... products without technical information |
| |
Fasteners with self tapping screws for heavy duty belt up to 18 mm thick:
- No drilling preparation, no template
- The screws drill themselves trough the belt
- Clamping effect of the plates against the belt
Material:
Fastener made of galvanized steel or non magnetic stainless steel.
Installation:
By using an electric screw driver or a pneumatic screw driver or a hand brace (for underground mines).
Packaging:
In pieces made for the requested belt width up to 3,000 mm in one piece.
The screws are provided in a plastic bag.
|
|
Flexible lacing with self tapping screws for heavy duty belts up to 30 mm thick:
- No drilling preparation, no template
- The screws drill themselves through the belt
- Good compatibility with scrapers
- Very long life time.
- Installation regardless of weather conditions
- Possible to use for an emergency splice of a steel cord belt
Material:
Reinforced rubber corresponding to conveyor quality: wear resistant, heat resistant, oil resistant, fire resistant, white FDA, textile on the bottom and non magnetic.
Installation:
By using an electric screw driver, a hand brace or a pneumatic screw driver.
Packaging:
In length up to 3 m in one piece or on roll up to 25 m long.
|
|
|
|
|
|
Flexco® Bolt Solid Plate fasteners are engineered to meet the demands of the toughest material-handling applications. They can be applied to belts mechanically rated up to 620PIW (105 kN/m), and are commonly used on higher-tension main-haulage belts used for highly abrasive materials such as sand, gravel, and crushed stone, as well as coal, cement, and salt.
Bolt Solid Plate fasteners provide a strong, sift-free splice with superior holding ability. The strength of this fastener is derived from the compression of the plates with high tensil strength bolts. The bolts compress top and bottom plates to distribute splice tension evenly across the entire width of each fastener plate. For added strength and pull-out resistance, specially formed teeth penetrate deep into the belt carcass - without damaging the carcass fibers.
Specially designed templets, punches and boring tools make it easy to quickly and accurately punch holes into belts. Fasteners can then be installed on site using portable hand or power tools. The exclusive Flexco piloted bolt speeds installation. The piloted bolt tip cradles nuts securely in place, and simplifies installation by automatically aligning the bolt and nut threads.
|
|
|
|
|
|
For belts operating over smaller pulleys - such as in construction equipment and road machinery - Flexco® Bolt Hinged fasteners are strong, dependable and easy-to-install.
Designed as a compression fastener, Bolt Hinged is fastened to the belt ends with high tensile strength bolts. These compress the plates in the belt cover. Additional holding capability is provided by the fastener teeth that inbed in the belt without damage to the belt carcass. So splice tension is distributed across the entire plate width and teeth secure the fastener to resist pull-out.
Hinged construction makes Bolt Hinged fasteners ideal for applications requiring frequent belt-length alterations, the joint can be separated simply by removing the hinge pin. A variety of hinge pins are available to match your application.
On-site installation requires only portable hand or power tools. A specially designed templet and boring tool or belt punch quickly and accurately punches bolt holes into belts. Installation is also simplified by our exclusive piloted bolt. Tapered bolt tips cradle nuts securely in place and eliminate the need to twist nuts onto bolts by hand during installation set-up.
|
|
Traditional fastener for rip repair and lacing.
Typ 140, 190, 1 ½, 2, 2 ½ & 3 for belts up to 25 mm thick.
Installation with a template, a driller and a wrench.
Material:
Fastener made of carbon steel galvanized or wear resistant special steel or stainless steel with a nylon washer holding the bolts.
Installation:
A template helps to make the holes with a driller. Using a wrench for screwing the nuts and a bolt breaker.
Packaging:
Standard box with 25 pre-assembled fasteners Type 140, 190, 1 ½, et 2.
Standard box with 10 pre-assembled fasteners Type 2 ½ et 3.
Bucket wit 100 pre-assembled fasteners.
|
|
|
Our ability to design and manufacture some of the industry's most advanced and widely-used feedscrews is one reason we have been an extrusion leader for more than 50 years. With our R&D facilities and team of experienced polymer process engineers, we offer customers world class screw design and technical capabilities.
|
|
The DRFF-520 Precision Screw Feeder incorporates an adjustable rail which accomodates screw thread diameters from 1.0-5.2mm (#0-#10). A rail adjustment kit is included with the feeder to facilitate quick and easy setup. Three potentiometer adjustments give the user control of feed intensity and time.
*single rail accomodates all screw sizes
*multiple adjustments to optimize feed rate
*less moving parts for increased durability
*quiet operation
*Economical way to increase Production
The DRFF-520 compliments Delta Regis Tools Core Business - Electric Screwdrivers. Visit our web site at www.deltaregis.com to view all our products.
|
|
Accu-Flo Screw Feeder
Series 495
The Series 495 Accu-Flo screw feeder is used for feeding weigh scales or other process equipment where a precise or consistent flow of dry bulk solids needs to be conveyed. Fabricated of all mild steel or stainless steel tubular construction, it is also available with air purged bearings, a fixed rate or variable speed drive and a TEFC motor. A standard inflatable seated butterfly outlet valve is also available upon request..
|
|
A-100 Series Screw Feed Systems
Increase productivity in your assembly area with the Acra-Feed® Automatic Screw Feed System which automatically feeds screws of up to one inch in length to your driver. The Acra-Feed® is custom adjusted to your work piece and fastener.
A-315V Series Screw Feed Systems
Includes the same features as the A-100 Series, but uses a vibratory track. Designed for feeding fasteners with captive washers.
|
|
| ... products without technical information |
| |
Our product line consists of proven technology including PneumaticScaleAngelus' Pneumacapper and Consolidated Capem Cappers. We also offer a wide variety of sorters to accommodate any size and shape.
-Proven technology from PneumaticScaleAngelus including Consolidated's Capem Cappers
-Reliable, minimal-maintenance, highly versatile capping solutions from the industry leader in packaging automation
-Widest range of cap and containers with maximum speeds of 750 CPM
-Superior customer service and technical support
|
|
The capping station is composed of a column where the cap distributor, the chute with the releasing head and the capping heads are installed.
The screw capping machines are manufactured in two versions:
PPV for pre-threaded plastic screw caps with a positive Pick&Place system. The capping station is equipped with closing heads having a magnetic friction to adjust the closing force and are hermetically sealed to prevent water or stream ingress.
VA for aluminium screw caps with direct pick system. The capping station is equipped with closing heads in stainless steel, complete with rolls that seal the cap to the container (ROP or ROPP).
In the event of no container, the head doesn't release the cap.
The caps distributor automatically and continuously feeds the chute and it is equipped with a no cap sensor.
In case the machine has to treat PET/PE/HDPE bottles, the filler can be equipped with a neck holding system.
|
|
The electronic screw capper stands out because of its operating simplicity and precision.
- The system doesn't require stars, mechanical clutches, or complex lifting mechanisms.
- The closing torque can be set from touch screen; the vectorial frequency converter allows to manage it with high precision.
- The handling parts to move the bottle in the machine are reduced to the minimum, so as the change-over downtimes.
|
|
| ... products without technical information |
| |
|
Internal anti-backlash leadscrew drives ball slide or crossed roller slide assemblies. Available in one two or three axes. shaft coupling and motor mount included.
|
|
|
Small, step motor driven stages for light weight (1-15 kg) payload scanning and positioning. Travel ranges from 5 cm to 75 cm. Includes stages, motors and programmable motor controller.
|
|
|
|
|
|
|
These stages feature exceptionally long life without the need of adjustment, lubrication or maintenance. The integration of a splined linear guide and leadscrew results in a torsionally stiff stage that can be operated in either a horizontal or vertical axis. These stages are ideal for: Pick-and-place, parts transfer, water jet cutting, laser cutting and laser etching, inspection, testing, packaging, and assembly applications. Designed for loads up to 100 lbs. (45 Kg) and speeds to 30 in/sec. (762 mm/sec) the stages can be specified in compound multi-axis configurations such as an X-Y-Z axis gantry robot. To suit the requirements of an application a variety of stepper motors, DC brush and brushless motors, or AC motors can be mounted to the stage. Options to enhance performance and ease integration into a new or existing application are: Custom drilled and/or tapped holes in the stage and/or carriage, end of travel limit switches which can disable the amplifier, linear encoder, cable carrier, and protective bellows.
|
|
|
The EMA series of electric actuators are available with Machine Screw and Ball Screw drives . They are suitable for low load, medium duty and high speed applications with dynamic ratings up to 10kN and 5500 mm/min.
|
|
Venture Ball Screw Actuators combine a highly efficient long life Ball Screw with a DC voltage electric motor providing a high performance ready to install electric linear drive system.
Standard strokes 4, 8, 12, 18, 24, 32, 36, and 40 inches (custom lengths available)
30% duty cycle motor rating
Available options;
Clutch
Limit switches
Reed, Hall Effect, Potentiometer and other sensor options
3000 lb static capacity / 1500 lb dynamic compression or tension
Lifetime lubrication
Designed for outdoor use
Compression or tension loads
Trunnion, Clevis, or Tube clamp mounting
High strength steel tube assembly with all-steel load support members
Efficient, long life Ball Screw
12VDC, 24VDC, 36VDC, 90VDC, or 120VDC for use with Rectified 120VAC Gearbox Design
|
|
|
|
|
|
The Eliminator HD™ Heavy Duty ball screw linear actuator provides a strong, durable, and precise linear motion actuator for industrial automation.
The Eliminator HD™ ball screw actuator converts the latest motor technology into high load, high speed, and high accuracy linear motion. Eliminator HD™ replaces hydraulic and pneumatic linear actuators, cams, levers, and linkages, with controllable motion, repeatable position, and easy adjustment.
E-DRIVE Design, Incorporated has shown consistent success in the toughest applications, e.g. High loads, high speeds, high precision, and extreme durability. Precision ball screw systems, tailored for maximum life, load and speed, provide the motion while fully enclosed, thus eliminating contamination related failures. A long bronze nose bearing provides support for the extended piston. Rugged bronze keys in opposing steel slots provide anti-rotation and counter the tangential forces created during high speed, high frequency, and high load operation.
While other actuator designs force a particular motor decision, the Eliminator HD™ is designed to suit virtually any motor, gear box, or gearhead the customer chooses to use. In-line as well as parallel offset configurations are standard with 1:1 and 2:1 synchronous gearbelt ratios available.
Dual, nonferrous dovetail switch tracks provide a simple method of placing and adjusting switches for over travel protection as well as "home" detection. Hall effect type limit switches are available.
|
|
|
|
see the results for the following category : 
