|
|
| These series are mainly designed according to ASTM & ISO standards for tensile, compression, bending and shearing test of metallic and non-metallic materials. With special accessory, they can complete mechanics performance test of rubber, belt, chain, steel, cable, cement, brick, concrete and other materials. The Machines can process test data, screen display test results and print test reports with a printer. Equipped with a (X-Y) recorder, they can plot the testing curves. |
|
Simple to set up, operate and maintain
Load measuring system exceeds the requirements of all recognised international standards
Uses high accuracy interchangeable XLC load
cells (0.5% of reading)
Crosshead travel 855 mm (33.66 in)
Speed range 0.001- 510 mm/min (0.00004 to20.08 in/min)
Data sampling rate 8 kHz
Saves up to 600 test results
10 programmable test set-ups
High resolution backlit LCD display with intuitive operator interface
Multi-lingual and multi-unit display options as standard
Flash memory upgradeable
Can be mounted above floor standing compression cage for large sample/complete assembly testing
Full PC integration with ISO TickIT accredited
NEXYGENPlus material test and data analysis software. |
|
Lacquer and Paint Testing Machine, Model 202 C
Version with electro-hydraulic drive for coated sheets up to 1.5 mm thick. Infinitely variable control of drawing speed up to 50 mm/min. Automatic clamping of specimen. By virtue of the C-form test head aperture it is possible to test sheet metal panels in addition to sheet metal strips.
Option:
Camera module VIDEOMASTER USB comfortable observation of the deep drawing process or stereo microscope. |
|
Instron's line of torque testers extends Instron's materials testing solutions by providing dependable torsion and axial-torsion testing capability.
These torsion testers utilize the familiar 5500 and 8800 electronics you've come to rely on. Available in capacities from 12 Nm (100 in-lb) through 13,000 Nm (120,000 in-lb) these test frames are versatile and easy-to-use for many applications including biomedical, automotive, aerospace and other industrial and consumer products.
The 55MT Series is a family of two table-top torsion testers.
55MT1 offers a 22 Nm (200 in-lb) capacity
55MT2 offers a capacity of up to 220 Nm (2,000 in-lb)
The 55MT Torsion Testers are based on a dual linear slide design, which provides for high torsional stiffness and minimal axial friction. The system torque cell is attached to a movable crosshead, which can be left free floating or clamped during testing. When left free floating, the user can apply an axial pre-load to the specimen using a weight and pulley arrangement. Closed loop servo control of the electromechanical drive is provided by Instron's standard 5500 electronics and Partner torsion software. |
|
They are used for tension-compression, torsion, fatigue, sorting and strength test of various kinds of springs, I.e. helix spring, worm spring, papilionaceous spring etc.
TNS-L Series: 50-5000Nm 7 kinds of specifications, digital display torque and torsion angle, vertical construction and easy to operate.
TNS-S Series: 500-100000Nm 8 kinds of specifications, digital display torque and torsion angle & printing test report.
TNS Series: 500-5000Nm 4 kinds of specification, digital display torque and torsion angle, horizontal construction.
|
|
bottle or jar opening tester : ANDITORK EA
The ANDITORK EA bottle or jar opening tester is specially designed to measure opening torques for bottles and jars.
Opening tester with ring securized cap : ANDITORK ST
If the cap has a security ring, the test can be carried out using the ANDITORK ST
Tester for small bottles : MICROTORK
The MICROTORK is specially designed for small bottles, and it is equipped with a small grip plate whose fingers can be used to hold small containers.
Available in Easy and Star versions.
Anditork Security : ANDITORK DL
The ANDITORK DL product is designed to measure opening torques with downward force.This procedure is used to check safety caps.
motorized opening torque measuring instrument : DRIVETORK
The DRIVETORK motorized opening torque measuring instrument is just the right equipment for production teams that have to carry out a lot of opening tests and want to eliminate the variability linked to operators.
Torsion test stand : TWIST
To carry out a precise, repetitive torque measurement,
it is often necessary to use a torsion test
stand.
The TWIST, a 1 to 12 NM torsion test stand
with combined Torque/Angle measurement provides this function.
Torque wrench calibrator : CENTOR Meter W
The CENTOR Meter W torque wrench calibrator enables verification of torque wrenches thanks to a series of reference sensors ranging from 22 to 222 NM.
torque screwdriver calibrator : CENTOR Meter H
A set of low-capacity reference torque sensors enables use of the CENTOR Meter H torque screwdriver calibrator to verify torque screwdrivers from 1 Nm to 6 Nm. |
|
Features
- High Accuracy and Repeatability
- Wide Range of Materials Testing
- Enhanced Control Panel
- Easy - to - Use
- Computer Control and Enhanced Software
- Modular Design
- Interchangeable Load Cells, Grips and Fixtures
SANTAM Universal Testing Machine is used for industrial quality control laboratories and research centers The machine is able to test the mechanical properties of a wide range of the materials such as:
Plastics, Rubber, Metals, Composites, Textiles, Yarn, Wire, Timber, Adhesives, Paper, Foams, Foils, Food, Film, Graphite, Finished Components
With additional accessories , the following test can be performed:
Tension, Compression, Bending
Peel, Shear, Flexure
Stiffness, Buckling, Ring Stiffness
Creep, Foam Hardness, Relaxation
|
|
This kind of machine is mainly suitable to measure and test the mechanics properties of metal, rubber, plastic and other materials. Equipped with EDC digital controller (made in Germany) and high precision load cell (made in Japan), the whole system has high liability and stability. It benefits and absorbs clients in all aspects. It is widely used in machinery, metallurgy, aviation& space flight, building, transportation, vessel, ceramic, vehicle, medical, electronic and other industries.
|
|
Early detection of developing faults in materials or products is essential for the prevention of costly losses in manufacture and claims resulting from faulty products, which can include consequential damages.
By establishing essential parameters for new products at the outset against which materials can be monitored, risks in safety and the
resulting possibilities for financial penalties are minimised.
Dealing with forces is dangerous. TesT attaches great importance to industrial safety. Universal testing machines made by TesT are fitted with electrically interlocked polycarbonate guarding.
Special safety guards for higher levels of risk or to enclose extra large
specimens are available on request. The safety provision meets the requirements of the European Community directives. Universal Testing machines made by TesT are CE-labelled and delivered with the CE conformity declaration, without any restriction. |
|
Early detection of developing faults in materials or products is essential for the prevention of costly losses in manufacture and claims resulting from faulty products, which can include consequential damages.
By establishing essential parameters for new products at the outset against which materials can be monitored, risks in safety and the
resulting possibilities for financial penalties are minimised.
Dealing with forces is dangerous. TesT attaches great importance to industrial safety. Universal testing machines made by TesT are fitted with electrically interlocked polycarbonate guarding.
Special safety guards for higher levels of risk or to enclose extra large
specimens are available on request. The safety provision meets the requirements of the European Community directives. Universal Testing machines made by TesT are CE-labelled and delivered with the CE conformity declaration, without any restriction. |
|
the simple BAT Stand : BAT 750
To insure the correct positioning of the force gauge in relation to the sample to be tested, the simple BAT Stand is the ideal solution.
Basic motorized test stand : BATDRIVE
The BATDRIVE basic motorized test stand is a force gauge support designed to test samples at a regular speed; it is especially well suited for small parts, and for tests requiring low force levels (less than 500 N).
The 1 to 5KN test machine : STENTOR
The STENTOR 1000, 2500 and 5000 are designed to carry out tests for all applications in which the displacement speed is specified by a standard, together with all applications in which the speed can have an influence on the measurement itself.
The 5 to 50KN test machine : ATLAS
The ATLAS 5 to 50 KN test machine is designed to carry out tests in all cases where the force necessary is greater than 5 KN. |
|
Universal testing machines SATEC Series kN
Planned for tensile the tests, compression, folding/inflection and shearing with high capacity, the design of models kN gets height as regards adaptability.
Characteristics
The space of single test ultra-broad can receive a range of sizes of test-tube, jaws, fixings, furnaces and extensometers.
High speeds of test and the long useful race make it possible to adapt to various conditions of test.
The electronics of numerical control ensures a high precision and the speed of answer. The integrated controller recognizes and calibrates automatically the sensors, thus eliminating the switches, the potentiometers and the dials.
The choice of the universal software of tests Partner™ material; or BluehillŽ 2 ensures the height flexibility facility of use.
The hydraulic jaws with side action standards facilitate the loading and the unloading of the test-tubes. |
|
| The universal testing machines of Instron make it possible to test in traction and compression on the same frame. Moreover, some built permit the tests of constraints reversed. The tests can be of the traction type, compression, shearing, inflection, peeling, tearing, cyclic and inflection. |
|
The systems of tests of table of Series 5860 are appropriate ideally for the tests of force lower than 50 kN requiring a precise alignment or to test the large test-tubes. These systems use the electronics of acquisition and the most powerful order and the software BluehillŽ 2 standardized in industry. Compared to the systems monocolonnes, the design bicolonne improves alignment and increases rigidity. These systems can be equipped with a vast range with jaws and accessories for the inflection, compression, tensile tests and component. The accessories available include/understand extensometers for the measurement of the deformations and the climatic chambers for the tests at varied temperatures.
Characteristics
Very high degree of accuracy: + 0.4% of the posted load (up to 1,0% of full capacity)
Very broad beach: Measurement bracket of force 500:1 (use of the sensor of force up to 0,2% of its capacity without loss of precision) with + 0.5% of the posted load
Precision of load +-0,5% of the posted load
High-speed acquisition of the data: 5000 Hz, synchronous on all the channels
Manual control panel studied for the operator well-being
Automatic recognition of the sensors of force and the extensometers
Compatible with the software BluehillŽ 2 and FastTrack for 5800
Exist in extra-high and extra-broad version
The second space of test in option
Library of testing methods ASTM and ISO
Open architecture for programming of personalized tests
Total conformity with label EC |
|
Adhesion Test Apparatus, Model 525
for Pull Off Tests
To measure adhesion of coatings in accordance with ASTM D 4541 by pulling off stuck on dolly. Robust unit requiring no electrical supply and therefore particularly suited to application in the field. Complete test case with necessary accessories. 3 versions for measuring ranges 5/10/25 N/mm2.
Adhesion Test Apparatus, Model 525-B
Special pull off test instrument version for concrete surfaces with 50 mm diameter dollies and measuring range up to 4.5 N/mm2. |
|
With the S-20 Tungsten Carbide Tool, Taber's Shear/Scratch Tester can evaluate coating adhesion on a variety of materials. A precision cutting tool is attached to a balanced and calibrated scale beam, then placed on the specimen. As the turntable rotates the specimen, the cutting tool will shear the coating, allowing you to verify proper adhesion. By changing the load on the cutting tool, you can determine the point of failure.
|
|
| Our compression equipment falls into two categories, set (constant strain) and stress relaxation. Compression stress relaxation is being increasingly adopted by aerospace, automotive and construction industries to characterise elastomeric seal. |
|
Wallace flexing machines test specially moulded rubber samples for resistance to cracking or cut growth by repeated flexing.
Wallace-MRPRA Fatigue Tester
The Wallace MRPRA Fatigue Tester measures the tensile fatigue resistance of rubber samples prepared in the form of standard Schopper rings.
De Mattia Flex Testing Machine
Tests specially moulded samples for resistance to cracking or cut growth by repeated flexing. Flex testing is recommended when flexing encountered in service can be simulated by the action of the test - as for example in the sidewall of tyres or soles of shoes.
De Mattia Flex Testing Machine in Oven
The heated version of the above product. Features digital temperature control with a range from 60°C to 150°C. |
|
Hardness (resistance to indentation) is one of the most widely measured properties used to characterise rubber - as it is a practical way of determining the degree of vulvanisation.
IRHD Micro Hardness Tester H12
Four models of the H12 are available, ranging from the basic model H12/1 to the H12/4, a PC controlled model.
IRHD Dead Load Hardness Tester
The Dead Load Hardness tester, Model H14, is a digital, fully automatic bench mounted instrument which is designed to conform to international standards for testing rubber and elastomers.
Shore A Hardness Tester
The H17A Shore 'A' Scale Hardness Tester is available in four different models. The design of each is robust and constructed from aluminium castings which with anti-vibration feet results in exceptional stability.
Shore D Hardness Tester
A bench mounted instrument which measures the hardness of harder rubber and plastics and displays the result in Shore D scale values.
Shore M Hardness Tester
Three models are available, H17M/1, the basic stand-alone instrument; H17M/2, with printer; H17M/3, with printer and data input terminal. |
|
| TABER's Linear Abraser was designed to test virtually any size or shape specimen and is especially useful to evaluate ink adhesion of decorated plastics or other products. This versatile instrument can also be used to evaluate material properties including resistance to wear, scratch (single or multiple pass), marring, scrape, color transfer [commonly referred to as crocking or a crockmeter], plus others. With the universal or a custom attachment, 'real world' testing and other forms of material durability can be performed. |
|
The Rubproofness Tester, model A7, measures how effectively printing ink adheres to paper or board. Conforming to BS 3110, the instrument evaluates the extent of colour transfer from printed or coated materials due to rubbing - a condition which frequently occurs during the handling and shipment of packaged goods.
The Wallace Rubproofness Tester measures the resistance to rubbing of printed paper or board. It can also be used to measure colour transfer from printed or coated material during rubbing. |
|
- Split Drum Mechanism for destruction testing of synthetic flat bed materials
- Hold material up to 300mm wide
- Maximum capacity 75 tonnes
|
|
Rope Grip Wedge Box
- Available for all machines up to 200 tonne capacity.
- Suitable for most materials.
- Grips smooth surfaces eg. Wire Rope, Synthetic Nylon & Aluminium Conductor Cable.
- Grips material without damage & can be used through to destruction on rope.
- Easy to use mechanism. Self releasing when load is dispersed
- Supplied with 10 varying sizes of inserts to suit application.
|
|
Cylindrical Mandrel Bending Tester, Model 266
To test adhesion and flexibility. Instrument with bending lever and 14 easily exchangeable cylindrical bending mandrels (2-32 mm dia.). To establish the smallest diameter of mandrel which causes the specimen
coating to fail after bending. Special adjustment and plastic bending roller for quick reproducible test results. |
|
Semi-Automatic Gum Content Determination by Jet Evaporation up to 280 °C
Gum content is the residue of substances mainly aircraft fuels and motor gasoline) under investigation which can not be evaporated under test conditions. The gum content is measured in units of mg/100 ml.
Suitable for: Aviation Fuel, Fuel, Gas Oil, Gasoline, Jet Fuel, Motor Gasoline, Turbine Fuel |
|
Indentation Hardness Tester acc. to Buchholz, Model 263
A steel block with an inserted impression body is applied onto the test surface and produces a pressure mark, the length of which is measured with a microscope. The impression hardness in accordance with Buchholz is established from the length of the impression, using the standard table. |
|
SCRATCH HARDNESS TESTER 413
Compact rotary table instrument for determination of the scratch hardness and scratch resistance of lacquered, glass or plastic surfaces (especially HPDL coatings). If proceeding in the appropriate manner, it is also possible to test small parts of different geometries. Four interchangeable diamond or carbide test tools with defined test geometries are available. Including two weights movable on the graduated load arm, load range 0.01 to 1 N
and 0.1 to 10 N. |
|
SCRATCH HARDNESS TESTER 430 P
Versatile instrument for mechanical tests: cross hatch cut, scratch (mar) resistance, scratch hardness and writing effect. Manual setting of the loading force (max. 50 N) (Model 430 P I) or motor-driven adjustment (Model 430 P II). 9 preset cross-cuts in compliance with the most commonly used standards; in addition one freely programmable cross-cut pattern. Two cutting speeds and two cutting lengths can be combined as required. Rapid clamping device for test panels and visual display upon cutting through insulating layers to metal subtrate. |
|
|
|
