|
|
VLM corrosion test cabinets provide best conditions for the conduction of high humidity tests due to its unique design. The bottom, rear wall and roof are made of stainless steel coated with Halar (ECTFE), a fluorine polymer used in chemical apparatus engineering. Hence there is a quick transfer of the heat from the heaters below the bottom into the water bath. So the water evaporates and condensates very evenly. The best reproducibility of the climate is achieved by the patented CTD-System
VLM CON cabinets for alternating water condensation tests are equipped with the working system “AIR”. That means that ambient air is introduced into the chamber by a fan. The air is evenly distributed to the chamber by a perforated pipe in order to dry the specimen evenly.
We offer a variety of table top models with a chamber capacity of 300 L and 400 L as well as 1000 L cabinets for conducting of tests requiring:
Condensation atmosphere with constant humidity
persuant to ISO 6270-2 (CH)
Condensation climate with alternating humidity and air temperature persuant to ISO 6270-2 (AHT)
Condensation climate with alternating air temperature
persuant to ISO 6270-2 (AT)
|
|
400 L Cabinet CON 400-S A-KES to conduct fully automatic Kesternichtests persuant to ISO 6988
This cabinet is equipped with the working system water condensation „CON“ with CTD System and the working system „AIR“ and provides best climate conditions for conducting water condensation and Kesternichtests. Please note that the water is only heated up by the heaters below the water bath. As we do not apply any circulating pump the surface of the water remains quiet. This is essential concerning the absorption of the SO2 comparable to the climate in manually operated Kesternich chambers.
The SO2 is measured by an advanced massflowmeter and monitored by the PLC which controls the complete test procedure.
The CON 400-S AKES cabinet meets high requirements of safety and convenience. If necessary an extension by installing the working system “SAL” salt spray is possible, thus fully automatic cycling corrosion tests can be carried out.
|
|
- By consistent vertical and horizontal force measuring with the test stand, more accurate measuring becomes possible.
- Select a suitable stand from a wide range of the products according to your requirement.
- Contribute to simplification of testing work and reduction of the labor.
- Recommend to use the stand with the digital force gauges.
|
|
Model: TVE
- Capacity: Up to 500 Newtons
- Large and removable base plate with various holes for fixture mountings
- Max Tarvel: 297mm from base plate
- Height of upper hook above base plate: 460mm
- Travel distance per knob rotation (stroke): 3.1mm
|
|
Customization
The AEMI chambers have been designed to satisfy most customer's requirements. However, if your testing demands a unique configuration or feature(s) not provided by our standard model, AEMI will work with you to configure a chamber that meets your specific testing needs.
Subsystem Integration
AEMI provides a total turnkey chamber solution including all of the technical expertise, project management, system integration, and installation services that complement the high-quality products we manufacture. This single-source solution ensures completion of a well-controlled, successful project to our customers. AEMI will provide complete antenna measurement system solutions to meet your testing requirements.
Construction
The construction of our anechoic chambers will depend on the shielding requirements of the complete facility AEMI has constructed chambers with stud/drywall methods to welded shielded enclosures, which provide 120 dB of isolation. The most common construction methods are as follows: Standard stud/drywall (no shielding) Stud/drywall utilizing foil (minimal shielding & isolation Welded shielding (120 dB shielding & isolation)
|
|
The TA-Series is a standard line of fully-equipped tapered anechoic chambers, delivering high-performance Far-Field antenna testing capability. Ideally suited for performing a variety of measurements, the TA-Series has been specifically developed to meet the increased performance demands of today's wireless and general-purpose antenna measurement applications.
The tapered chamber is a spherical antenna range configured with one side tapering with square-to-round transitions to a true conical section.
The tapering walls bring the reflections into phase coherency so that they are all in phase in the test region, resulting in a smooth amplitude taper illuminating the antenna under test. The energy is transmitted from the conical section toward the terminating end wall absorbers at normal and near normal incidence. Chamber reflections and extraneous energy in the test region are determined primarily by the reflectivity performance of the pyramidal absorber on the end wall. By designing the chamber with high performance terminating wall absorbers, the TA-Series delivers greater accuracy for low frequency measurements (down to 200 MHz).
|
|
1. Performance Characteristic:
The resolution is 500000 Codes, Satisfy the related material experiments the method standard, Control and show automatically in experiment process, Have various control methods and curve forms(Include the true stress-strain), The trial report is programmable.
2. Basic configuration:
One host machine, one servo oil source, one computer of the upscale brand, one A4 color Ink-jet printer, one Germany DOLI EDC-120 apparatus for measuring and controlling, one displacement transducer, MOOG servo valve, one extensometer, one table for meter, accessories.
3. Main Specifications:
3.1. Max. testing tensile force:2000kN
3.2. Range of load measurement:20-2000kN
3.3. Accuracy of testing force reading:1%
3.4. Accuracy of displacement reading: 1%
3.5. Load resolution:250000 steps
3.6. Displacement resolution: 2%u03BCm
3.7. The speed of the piston:0-150mm/min
3.8. Rated pressure of pump:25Mpa
3.9. The max tensile space:0-1200mm
3.10. Amount of column:4 pole
3.11. Stroke of piston: 350
3.12. Dia. Of gripping for round specimen: %u03A615-70
3.13. Thickness of gripping for flat specimen: 5~50mm
3.14. Size of down and up flat: 280280mm
3.15. Dimension of frame:14009205060mm
3.16. Hydraulic resource dimension: 11009001200mm
|
|
This machine is mainly used for various materials of tension test, such as metal wire, thin plates, rubber, plastic, composite material, waterproof material, paper, spring, textile, yarn, wire and cable, and for all kinds of adhesive tapes of 90, 180 peel test. The material mechanical property can be obtained automatically according to different criterions, and a complete test report and curve can be printed out.
The Panasonic digital servo is introduced in control system of this machine, and equipped with high accurate pretightening ball screw for driving crosshead, photo-electric encoder for displacement feedback.
Adopt many passages of total digital CTS-500 system of AUTO measuring and controlling , having no the class to adjust, The reading accuracy is 1% , The speed accuracy is 1%,The displacement accuracy is 0.5% , The resolution is 250000 Codes, equal to 7 sections, no subsection in full-measuring, Satisfy the related material experiments the method standard, Control and show automatically in experiment process, Can print the result of experiment, Have various control methods and curve forms, (Include the true stress-strain), The trial report is programmable.
|
|
This machine is mainly used for mechanical property test of concrete, high-strength concrete cement products and other materials.
Loading by high accurate hydraulic valves in this machine, the test space is adjusted by motor screw, and loading can be controlled by manual or automatically. This machine is controlled full-automatically by computer. The whole test process is completed according to stress rate of present curve. The load, speed, data and test curve can be displayed in dynamic.
Performance Characteristic:
The reading accuracy is 1%, accuracy of loading speed is 1%, auto closed loop control are processed by computer, loading speed is set discretionarily, loading is reposeful, controlled performance is good etc. Test data can be automatically processed, test report and curve can be print.
One host machine, one computer of the upscale brand, one A4 color Ink-jet printer, a set of high quality servo valve.
Adopts double-column host machine structure below 600kN.
Another EUR 56.00 is paid for an added Grip for concrete four points bend.
|
|
This machine is mainly used for metal and non-metal of tension test, compression test, bending test and shearing test.
The oil cylinder is set on the bottom in this machine, the test space can be adjusted automatically by motor, hydraulic damp automatically, and with 4 adjustable columns.
The reading accuracy is 1% , the accuracy of extensometer is 0.5% ,Auto process data of Experiment with a computer, Satisfy the related standard of material experiments , Dynamically display load, elongation, load speed and real time trial curves, automatically calculate Rm (%u03C3b), %u03C3s, ReH (%u03C3su), ReL (%u03C3sl), Rp0.01 (%u03C3p0.01), R p0.05 (%u03C3p0.05), Rp0.1 (%u03C3p0.1), Rp0.2 (%u03C3p0.2), E and so on, can print on trial report and curves. Adopt digital frequency conversion to load, the speed is steady, consume of power is small, the noise is low, oil temperature is low for working long hours, operation is simple, safe and dependable.
Basic configuration:
One host machineCone oil source like piano ,one computer of the upscale brand, one A4 color Ink-jet printer, one load cell ,one extensometer , one table for meter, accessories for extension, compression and bend, , one high quantity pump, one auto hydraulic grip.Have not shearing clamp in test machine of 2000kN
|
|
|
This series of machine is suitable to test the mechanics properties of metal, non-metal and compound materials. It is designed according to GB, JIS, ASTM, DIN, and ISO standards. It can automatically calculate tensile strength; yield strength, elongation ratio and broken strength and other parameters of the materials. It is ideal equipment for quality control and laboratory research in factories and high schools.
|
|
|
Pendulum impact testers that can be easily changed from a Charpy configuration to an Izod configuration. A third configuration for tensile impact is also available. These testers are available in capacities of 406 J (300 in.lbf) or 542 J (400 in.lbf) of available energy and are designed primarily for metals impact testing.
|
|
The Equotip Piccolo is a revolutionary portable rebound hardness tester for precise measurements on most metals.
It integrates the display and a patented mechanism in one device where the impact body type D is launched and loaded for the next test in a single motion!
The Piccolo is designed and manufactured with the quality and precision that is expected from Proceqs Equotip product family and will comply even with the roughest manufacturing environments.
The basic kit comes with the bundle of the Piccolo device and Piccolink PC software, permitting full communication between tester and PC via USB.
|
|
Unrivalled performances
AG-X : You door to the future..
Experience unsurpassed reliability and operability with the new Shimadzu Autograph AG-X. This revolutionary new model delivers high-level controlled measurement performance utilizing a combination of patented technology from earlier models and world-class innovations.
Development of this series focused on intuitive operation and convenient support functions, resulting in standard equipment that includes both a color TFT touch panel screen for PC-free operation and the very popular Smart Controller operation featured on many of our earlier testing machines.
The TRAPEZIUM X software has also been newly developed, using cutting-edge Microsoft .NET technology to enhance user-friendliness. Shimadzu's new AG-X series advances testing in three areas performance, operability and support.
Dont miss your chance to find out more about our Universal Testing Machines, Hardness Tester and Capillar Rheometer
|
|
|
The vertical universal friction and wear testing machine model MMW-1A, is designed to develop all kinds of medium and high grade hydraulic oil and evaluate inspection testing machine, and the application and function is similar to FALEX No. 6 multi-function testing and measuring testing machine. This machine is standard testing machine to evaluate anti-wear character for lubrication grease or oil with ASTM D 4172-82, ASTM D 2266-81. And also is standard apparatus for evaluating oil, with hydraulic lubricant, anti-friction character in general petroleum and chemistry industry Corporation. With XBE34007-87. the above method is used four ball friction couple measuring relative anti-wear character for lubrication agent under the special testing condition. It is widely used in developing anti-wear hydraulic oil products.
|
|
PosiTest AT - Digital Adhesion Tester
This hydraulic pull-off tester measures the adhesion (bond strength) of coatings to metal, wood, concrete and other substrates. Kit comes complete with everything needed to perform tests with 20mm aluminum dollies.
+/- 1% accuracy
Internal memory stores maximum pull-off pressure, rate of pull, test duration and dolly size for up to 200 pulls
Self aligning dolly enables accurate measurements on smooth or uneven surfaces
Pull Rate Indicator - allows operator to monitor and adjust the rate of pull
Range: 0 - 3000 psi (0 - 20 MPa) with included 20mm dollies (20)
Optional 50 mm Accessory Kit pulls larger dollies for greater resolution. Ideal for lower bond strength finishes such as on concrete. Range 0 - 500 psi (3.5 MPa)
Optional software and RS232 cable for downloading to a PC
Includes carry case, 2-AAA batteries, epoxy, cutting tool, video, and Calibration Certificate
|
|
Feature:
● Determining the Brinell hardness of unquenched steels,
cast iron, non-ferrous metals and soft bearing alloys etc.
● High testing precision, extensive testing range, automatic
load system
● Standards: ASTM E-10, ISO6506.2
|
|
|
Model HB-3000 Brinell Hardness Tester is the winner of the national quality silver medal prize. It adopts the mechanical changeover switch. Model HB-3000B is equipped with an electrical changeover switch. They can be used to determine the Brinell hardness of unquenched steels, cast iron non-ferrous metals and soft bearing alloys, etc.
|
|
Based upon automated indentation diameter detections, not depths, this system accurately calculates and displays Brinell Hardness Values...after test load dwell time...in five seconds or less. It employs a computer, keyboard monitor, and an advanced-design optical system for production testing, report printing and data storage. Will test flats, rounds, and cylindrical parts. Complies completely with ASTM E10, ASTM E4, and ISO 6506.
|
|
Compression testing can be carried out on Lloyd Instruments extensive range of materials testing machines from 1kN-300kN. Ideal for routine quality control testing or complex multi-stage tests. Our 'Plus' Series machines are flexible and simple to use, providing high accuracy load measurement and are capable of a rapid 8 kHz data acquisition rate. The stand alone system can store up to 600 test results from 10 programmable test set-ups or, with PC integration with Lloyd Instruments powerful NEXYGENPlus material test and data analysis software, can perform advanced data analysis.
|
|
|
This series is mainly designed for compression test of building materials (such as cement and concrete, etc.) and metallic & non-metallic materials. Equipped with special accessories, it can do bending test for components. With PC-electro-hydraulic servo control system, it can complete auto-control of test stroke and loading speed. Meanwhile, With PC, it can carry on collecting, processing, displaying, and storing data and it can display test load, the peak value of test load and the curves of test load Time on screen, auto-processor (according to corresponding test method) and store the processing results. With specially designed Window software, it makes the man-machine dialogues more perfectly. By using of mouse input, it operates more easily.
|
|
|
This machine adopts loading hydraulically with accurate and reliable test data. In order to guarantee the accuracy of test load readout, it adopts oil pressure transducer to measure the load, after amplifying, the test load, peak value and loading speed can be displayed digitally. The oil source is installed at the bottom of control cabinet in which there is a double-flow high-pressure piston pump driven by the motor. The hydraulic system is controlled manually with the functions of easy operation, safety and reliability.
|
|
|