|
|
|
This system is used mainly for performance of tensile tests on metals as per DIN EN 10002-1. The modular system consists of the materials testing machine (e.g. Zwick Z050) and an automatic specimen feeding system in portal design with a triple-axis robot arm. Add-ons such as the cross-section measurement unit, roughness measurement unit, coating thickness measurement unit as well as a hardness tester complete the system. The specimen magazine can hold up to 400 specimens.
|
|
|
|
|
|
The 600 kN Hydraulic Testing System with Single Side-Acting Hydraulic Grips is completly customizable, the grips are ideal for tensile testing of stranded wire or cable and uniquely feature longer jaw faces to better accommodate gripping. These longer jaw faces are extremely important for tensile testing, as strands can easily slip from conventional grips, ultimately affecting the integrity of the test and test results.
Cost-effectively designed with multiple testing system configurations including tension, compression, bend, shear and flexure, Instron’s KN Series Universal Hydraulic Testing Systems allow for a flexible single test space. The versatility of design also enables the user to easily add test stroke or increase the test opening and the testing space is easily accessible due to upper actuator design.
For increased operator and equipment safety, Instron’s KN Series ensures that the actuator does not travel past the limits of its design. Superior accuracy is provided by Instron’s load cell system and zeroing capability. The variable pressure power pack provides pressure on demand, reducing heat generation for increased oil life, decreasing maintenance and eliminating the need for water cooling.
|
|
Servo-Hydraulic Testing Machines
The ExPress line of machines are a bold new approach to servo-hydraulic machines for static testing. Manufactured to exacting standards, these machines are accurate, tough and cost less than conventional hydraulic testing machines. ExPress frames employ strain gage load cells for direct measurement of force. No need to compensate for piston friction and other non-linearities, these frames offer exceptional accuracy and precision while reducing long-term calibration and service costs.
ExPress frames feature a simple design based upon off-the-shelf components for lower cost, faster delivery and long-term availability. Our conservative design is based upon continuous testing to maximum load for years of maintenance free operation. The hydraulic power supply and electronics are integral with the frame thereby saving valuable lab space.
|
|
|
|
|
|
A range of drop weight impact testers for measuring the fracture characteristics and fracture ductility of steel specimens according to the following standards: API recommended practice 5L3, EN 10274, ASTM-E 436 and 'Pellini'
Key features:
Very robust construction stands up to the rigours of high energy testing to provide high reliability with a minimum of downtime.
Easily interchangeable contact parts simplify maintenance and reduce cost of ownership.
State-of-the-art testing accommodates impact energies up to 100,000J and specimens up to 50mm thick.
Very high levels of safety employing multiply redundant systems, compliant with 89/392/EEC and 91/368/EEC machinery safety directives.
Automated specimen loading provides compliance with cycle times required by test methods, while maintaining operator safety.
Very rigid base and anvils ensures very low flexure under high test loads.
Guided mass system to ensure that the impact geometry is correct throughout the entire test.
Highly accurate and repeatable drop parameters.
High quality, easy to use control software ensures consistency and enhances throughput.
Optional instrumentation package to measure impact force up to 1500kN.
Provides values for peak force and energy to fail, together with a high resolution force-deflection curve to analyse failure mode.
Optional variable mass system to provide precise control over impact parameters.
Optional high speed, fully integrated video system to provide visualization of specimen failure mode.
Optional liquid cooled temperature conditioning bath.
Responsive life-time technical support.
|
|
|
|
|
|
The continuous growth in pipeline networks means that materials testing is becoming more and more important for the protection of people and the environment.
Against this background Zwick has enlarged its product program for metals testing and introduced a new DWT line of large drop impact testers from 20 to 100 kJ.
The drop weight test helps Engineers to evaluate the fractured surfaces of Ferritic steels, as the relative proportions of deformation and brittle fracture surfaces are diagnosed by visual determination. Ferritic steels are usually used for pipeline tubes or for sheet metals used in the manufacturing of such tubes.
The recommended practice 5L3 issued by the American Petroleum Institute (API) describes the testing procedure to be used on large-drop impact testers. A specimen supported at both ends is impacted with a cold-press-fitted notch, with the point of impact opposite the notch. Since the specimen thicknesses are very large sections of actual pipeline tubes, high impact energies of up to 100,000 Joule are necessary to break the specimen.
Zwick’s DWT large-drop impact testers are differentiated by their sophisticated integral safety concept that does not allow any access to the test area while in test mode. Furthermore, for drop impact tests, high rates of testing are required, so Zwick has developed a pneumatic feeding system to simplify the loading of the specimens into the testing machine.
|
|
Single Column Testing Machines 1-5 kN (225-1124 lbf)
Lloyd Instruments offers a range of affordable single column test machines for a wide variety to test applications up to 5 kN (1124 lbf).
All machines are capable of tensile, compression, flexural, peel, shear, friction testing and more. Flexible, easy to use and maintain, they offer high accuracy position measurement, rapid data acquisition, multi-lingual and multi-unit display options as well as full PC integration with ISO TickIT accredited NEXYGENPlus material test and data analysis software.
|
|
|
This series of machine is suitable to test the mechanics properties of metal, non-metal and compound materials. It is designed according to GB, JIS, ASTM, DIN, and ISO standards. It can automatically calculate tensile strength; yield strength, elongation ratio and broken strength and other parameters of the materials. It is ideal equipment for quality control and laboratory research in factories and high schools.
|
|
The Zwick servo-hydraulic testing machines are flexible and reliable testing systems. They can be adapted to multiple applications such as tests on standard specimens or individual components and assemblies (rubber-metal elements or artificial hips). All servo-hydraulic testing machines are optimized to meet your requirements.
The different load frame types have been designed to guarantee a long life and easy maintenance so that they are a reliable long term investment. Their capacity ranges from 5 kN up to 1000 kN and their testing frequency from a few Hz up to 100 Hz or 200 Hz thanks to their enhanced stiffness and increased natural frequency.
|
|
ProLine is a simple and compact test machine that was developed to meet the demand for low-price top-class test machines for functional testing of components and for standard applications on basic materials.
With the ProLine, Zwick Roell meets your demands for fastest delivery times
|
|
|
Pendulum impact testers that can be easily changed from a Charpy configuration to an Izod configuration. A third configuration for tensile impact is also available. These testers are available in capacities of 406 J (300 in.lbf) or 542 J (400 in.lbf) of available energy and are designed primarily for metals impact testing.
|
|
RKP 450
This pendulum impact tester for an impact energy up to 450 Joule is designed for determination of the impact energy according to Charpy or IZOD, for impact tensile tests and for tests according to Brugger.
Features:
Avoidance of interfering vibrations by stiff construction and one-piece fin welding construction
Easy exchange of fin, supports and abutments thanks to tight fitting
Ergonomic single-column construction for easy access to the specimen
Low-friction pendulum bearings
Use of standard pendulum fin for Charpy, IZOD, Brugger and impact tensile tests
Component testing possible due to the U profile of the fin and the single-column floor-type construction
Suited for tests to ASTM E 23 for temperature-treated specimens and for cold specimens (-40 °C), in particular, owing to fast (<5 sec) test runs
Extendible with unproblematic retrofitting of all add-ons
|
|
Zwick offers a wide range of pendulum impact testers for tests according to Charpy, IZOD, Brugger and Dynstat as well as for impact tensile tests. And, of course, we ensure that our machines fulfill the requirements of the relevant test standards such as ASTM E 23, EN 10045, DIN EN ISO 180, ISO 179 or ISO 8256 were fulfilled.
The pendulum impact testers cover a range from 0.5 Joules to 750 Joules. They are available in a variety of models, e.g. for instrumented or non-instrumented tests, with analogue or digital displays and with a range of different options especially geared for your tests.
|
|
zwicki-Line
Our zwickis are high-quality, low-cost, and space-saving test machines. They have been designed particularly for applications in the range of mechanical tests with low loads. These machines cover a wide applicational spectrum: from plastics and elastomer testing over paper, textile, and foam material testing and wire tests up to components testing.
ProLine
ProLine is a simple and compact test machine that was developed to meet the demand for low-price top-class test machines for functional testing of components and for standard applications on basic materials.
With the ProLine, Zwick Roell meets your demands for fastest delivery times with a delivery time of only 2 weeks!
|
|
Twin Column Testing Machines 5-50 kN (1124-11241 lbf)
For applications in the mid force range, Lloyd Instruments offers a wide range of testing machines and accessories for forces up to 50 kN (112241 lbf).
Ideal for routine quality control testing or complex multi-stage tests, all machines can perform tensile, compression, flexural, peel, shear, friction tests and many more. Flexible, simple to use and maintain, they provide high accuracy load measurement and are capable of a rapid 8 kHz data acquisition rate. The stand alone system can store up to 600 test results from 10 programmable test set-ups or, with PC integration with Lloyd Instruments powerful NEXYGENPlus material test and data analysis software, can perform advanced data analysis.
|
|
|
It is a universal testing machine capable of carrying out tensile, compression, bending and shearing tests. Operation is manual, semiautomatic, and automatic. The test instrument can be modularised taking into account that the structure con house 3 permanently installed load cells for compression tests, and tensile grips for tests, including at break. Our system uses several cards (for axis and cell reader control) that are connected via CanBus to enable displacements to position or force at a feedback speed of 1000 Hz. Load cell reads are effected 1,000 times per second. Minimum indexing is 1/32.700 (this can be ircreased by slowing down load cell reading',. The universal testing machine operates with computerized numerical control and includes a computer with HD and touch screen.
|
|
|
|
|
|
The systems of tests of table of Series 5860 are appropriate ideally for the tests of force lower than 50 kN requiring a precise alignment or to test the large test-tubes. These systems use the electronics of acquisition and the most powerful order and the software Bluehill® 2 standardized in industry. Compared to the systems monocolonnes, the design bicolonne improves alignment and increases rigidity. These systems can be equipped with a vast range with jaws and accessories for the inflection, compression, tensile tests and component. The accessories available include/understand extensometers for the measurement of the deformations and the climatic chambers for the tests at varied temperatures.
Characteristics
Very high degree of accuracy: + 0.4% of the posted load (up to 1,0% of full capacity)
Very broad beach: Measurement bracket of force 500:1 (use of the sensor of force up to 0,2% of its capacity without loss of precision) with + 0.5% of the posted load
Precision of load +-0,5% of the posted load
High-speed acquisition of the data: 5000 Hz, synchronous on all the channels
Manual control panel studied for the operator well-being
Automatic recognition of the sensors of force and the extensometers
Compatible with the software Bluehill® 2 and FastTrack for 5800
Exist in extra-high and extra-broad version
The second space of test in option
Library of testing methods ASTM and ISO
Open architecture for programming of personalized tests
Total conformity with label EC
|
|
|
The new MultiTest range of compression & tension testers features test stands which are manufactured using a rigid aluminium base casting. The test stands have a fabricated metal housing, thus providing rugged instruments with a high degree of rigidity and strength.
|
|
Allround-Line
The Allround-Line satisfies strictest demands and performs superior test tasks. Add-ons are available and harmonized with the test machines for clear-cut operability. These test machines cover a wide range of applications.
High Capacity Machines
These are static testing machines for load forces up to 2000 kN.
|
|
|
|
|
|
Equipment manually operated for right and left torque control on springs with two ad{ustabfe stops for the angular position, with horizontal enb/oc structure with precision ball type guides- Its high definition electronic cell allows torque measurements while the angular positions are controlled by digital encoder with 0. / degree minimum division. The elasticity of the torquemeter cell is automatically compensated. This torquemeter is supplied with tables, adjustable in order to set the torsion point, and either operates with the relative zero given by the spring contact, or with the absolute zero given by the anvil contact. How it is conceived: The instrument provides direct torque measurement, which means it provides the same measurement at all times, including when connection points vary. Therefore, there is no need for accurate positioning of the drive arms.
DIGITAL
The digital part has a push button panel in order to visualize on two displays the torques and angles. Kgmm and Nmm are the commutable units and on request, British measures con be supplied. These functions are set with keyboard and they provide for:
• AUTOMATIC ZEROSETTING. Possibility to zeroset angle and torque on any point
• RECALIBRATION. Keys are provided far setting the sample torque, together with a key for storage.
• MULTICELI (optional). Electronic commutation key in case of more cells
• TOLERANCES. Three leds are far rates over/under/within tolerance
• DATA TRANSMISSION. The instrument is supplied with an RS 232 output
|
|
|
|
|
|
Instron's line of torque testers extends Instron's materials testing solutions by providing dependable torsion and axial-torsion testing capability.
These torsion testers utilize the familiar 5500 and 8800 electronics you've come to rely on. Available in capacities from 12 Nm (100 in-lb) through 13,000 Nm (120,000 in-lb) these test frames are versatile and easy-to-use for many applications including biomedical, automotive, aerospace and other industrial and consumer products.
The 55MT Series is a family of two table-top torsion testers.
55MT1 offers a 22 Nm (200 in-lb) capacity
55MT2 offers a capacity of up to 220 Nm (2,000 in-lb)
The 55MT Torsion Testers are based on a dual linear slide design, which provides for high torsional stiffness and minimal axial friction. The system torque cell is attached to a movable crosshead, which can be left free floating or clamped during testing. When left free floating, the user can apply an axial pre-load to the specimen using a weight and pulley arrangement. Closed loop servo control of the electromechanical drive is provided by Instron's standard 5500 electronics and Partner torsion software.
|
|
|
|
|
|
UNIVERSAL TESTING MACHINE CAPABLE OF CARRYING OUT TENSILE, COMPRESSION, BENDING AND SHEARING TESTS.
Operation is manual, semi-automatic, and automatic.
Testable objects include: springs, metal wires, plastics, cables, chains, hooks and other. The test instrument can be modularised taking into account that the structure can house 3 permanently installed load cells for compression tests, and 3 sefs of tensile grips for tests, including at break. Our system uses several cards (for axis and cell reader control) that are connected via CanBus to enable displacements to position or force at a feedback speed of Ì 000 Hz. Load celt reads are effected 1,000 times per second. Minimum indexing is 1/32.700 ¡this can be increased by slowing down load cell reading). The universal testing machine operates with computerized numerical control and includes a computer with HD and touch screen. It is a self-supporting, two-columns structure with ball screws. Its electronic setup enables cycles of stress of sinusoidal form which result in machine preservation and remarkable performance - notwithstanding the boll screw mechanism. DC power driven, encoder (or optical ruler}. The computer programme for this machine has entirely been developed by Easydur based on Windows XP, with internal files, statistics and certificate management in Excel format, which allows users free modularisation and customisation.
|
|
Universal testing machines Inspekt table blue up to 20kN
The materials testing machines of the series Inspekt table blue are especially suitable for standard applications in quality assurance. Due to the high demand for cost-efficient testing machines, Inspekt table blue has been equipped with a simple, but multifunctional load frame. Depending on the demands and complexity of the testing task, it is possible to carry out tests with or without an external computer.
Universal testing machines Inspekt table up to 250kN
The material testing machines of the Inspekt table series have been designed for universal application in many different sectors of industry. Typically, they are employed in incoming and outgoing goods departments, research and development, and material testing laboratories. Hegewald & Peschke GmbH attaches great importance to the reliability and flexibility of its machines. Thus, Hegewald & Peschke GmbH uses only high-quality components.
|
|
|
The inspekt mini is a very lightweight testing machine, which has been designed for simple standard tests or customer-specific, more challenging tests. It stands out due to its convincing cost/performance ratio and the user-friendly manner of operation. In connection with the testing software LabMaster, Inspekt mini machines can determine material characteristics of wires, foam plastics, elastomers, plastics, paper, cardboard, textiles, foodstuffs, and components in a quick and easy way.
|
|
|
The Inspekt series of universal testing machines offers the highest mechanic precision of all Hegewald & Peschke machines. It is also characterised by its first-class frame stiffness, modern control electronics, and a convincing cost/performance ratio. The size of the test spaces of the individual machines can be customized. Naturally, it is also possible to add one or more test spaces. Thus, the top-quality, rugged machines can be used for almost any testing task at the best reliability and accuracy.
|
|
|
|
|
|
Allround-Line
For optimum harmonization with the requirements of your test, the Allround-Line offers a variety of load frames, e.g. table-top or floor machines, with different maximum forces up to 250 kN, various heights and widths, or even with a second test area. And, of course, accessories like safety shields, temperature chambers, and further test equipment are also available in a wide range to meet your particular needs.
The test machines from the Allround-Line can also be operated with or without a PC as desired. The operation with standard PCs (no additional card necessary) and the test software testXpert® offers you the highest operating comfort, efficient data analysis and statistics, and performant networking functionality.
The test machines are all equipped with our proprietary electronics console testControl.
Advantages:
Mechanics, electronics and software as a modular system for customization with our add-ons
Crossheads with uniform mechanical interfaces for shorter re-equipment times, ideal when alternating test types
High crosshead travel and a wide test area
Robust and sturdy industrial drive system
Wide range of test equipment available for a large spectrum of applications
Ergonomic working in a seated or standing position
|
|
|
|
|
|
The model ADF-Automated Yarn Strength tester is a robust, single end yarn tester designed to exceed the most stringent testing requirements for measuring yarn strength. The ADF-Automated Yarn Strength tester is capable of providing a variety of calculations including tensile strength, elongation, tenacity, work and modulus of an extensive range of yarns.
The unit is a fully automatic yarn tester and can continuously measure up to 20 bobbins of different types of yarns. Test result and data storage is made possible through the instruments serial port to a PC to collect test information. Advanced software provides multiple plots, force/elongation histogram, linear regression and average force curve of a bobbin.
STANDARDS
Meets ASTM 2256, BS 1932/1, DIN 53834/1, UNI EN ISO 206
SPECIFICATIONS
ADFW Automatic Yarn strength tester complete with one cell load, one set of clamps with faces, 20 positions creel - max. diameter 250 mm (9.8 in)
Measure Method C.R.E.- Constant Rate of Extension
Available Load Cells 20N, 50N, 200N, 500N
Speeds 20-5000 mm/min. (.78-197 in/min.)
Specimen Length 100-500 mm (3.9- 19.6 in)
Bobbins Can test up to 20
Power Supply 110V/60 Hz or 220 V/50Hz
|
|
|
The TABER® Rotary Platform Abraser (Abrader) was developed to perform accelerated wear testing. First introduced in the 1930's, this precision built instrument rapidly became the world standard for evaluating abrasion resistance. Since its inception, the Taber Abraser has been used for quality & process control, research & development and material evaluation. Used to test a wide spectrum of materials, the abraser (abrader) has been referenced in numerous standards and specifications and is frequently called a Rotary Platform Dual (Double) Head Tester
|
|
Washability and Scrub Resistance Tester, Model 494
Robust instrument for standard tests of washability and scrubbability of emulsion paints and similar coating materials. Available accessories: standard brushes, PVC foils (Leneta® equivalent ), dosing pump.
|
|
|
The vertical universal friction and wear testing machine model MMW-1A, is designed to develop all kinds of medium and high grade hydraulic oil and evaluate inspection testing machine, and the application and function is similar to FALEX No. 6 multi-function testing and measuring testing machine. This machine is standard testing machine to evaluate anti-wear character for lubrication grease or oil with ASTM D 4172-82, ASTM D 2266-81. And also is standard apparatus for evaluating oil, with hydraulic lubricant, anti-friction character in general petroleum and chemistry industry Corporation. With XBE34007-87. the above method is used four ball friction couple measuring relative anti-wear character for lubrication agent under the special testing condition. It is widely used in developing anti-wear hydraulic oil products.
|
|
|
The TABER Oscillating Abrasion Tester – Model 6100 is best known as an “oscillating sand tester” and is used to measure the resistance of a material to surface abrasion and scratching. It’s primary application is for transparent materials and coatings utilized in windows and lenses, but it can also be used to evaluate organic coatings, plastics, metals and other materials.
|
|
|
|
