Compression testing can be carried out on Lloyd Instruments extensive range of materials testing machines from 1kN-300kN. Ideal for routine quality ...
The Chatillon® TCD225 Series is an advanced force testing system optimized for production, quality control and engineering applications.
The TCD System consists of a powerful, yet easy-to-use console; a rugged frame with high performance, closed-loop motion control; and an intelligent load sensing system ...
Single Column Testing Machines 1-5 kN (225-1124 lbf)
Lloyd Instruments offers a range of affordable single column test machines for a wide ...
Simple hand-operated Sheet Metal Testing Machine, Model 100
Recommended for use in factories and workshops where a low ...
Universal Sheet Metal Testing Machine for Research, Development and
In-process Testing, Model 146-60/100
The special feature of this testing machines is the increased drawing speed of the drawing punch which, in ...
Bulge/FLC Tester, Model 161
It is possible to test specimens up to a size of 400 x 650 mm when conducting the hydraulic deep-drawing test with the Bulge/FLC tester: In addition to the actual hydraulic forming process ...
Drastic Reduction in Turn-Around Time from Design to Test
The TS6000H offers test development solutions that achieve a drastic reduction in the turn-around time from design to test and significantly increase test rates and the number of test pins, enabling wider device coverage. This allows test debug to be done prior to the process-out of the engineering sample devices, as well as reduction ...
System-on-a-chip devices are spreading rapidly in the multimedia consumer market. These modern devices have more functions and higher performance than their predecessors, and offer tremendous benefits. System-on-a-chip devices, however, are particularly cost-sensitive, and the cost of testing their advanced capabilities often is unacceptably high. One of the key issues in making these devices ...
The volume production of automative LSI, mixed LSI based digital as well as baseband cellular phones now requires more complicated and high-resolution testing, and yet the pressure to reduce the cost of testing continues to increase. The TS6800 is specifically designed to address these contradicting cost performance requirements. To deliver high throughput, ...
TesT 205 screw testing machines were newly developed based on the
experience of many years and essentially consist out of 4 components:
- 1 force/torque transducer
- 1 machine frame with regulated drive, angle measurement ...
Packaging Testing Machine
(Box-Compression-Tester)
Packagings are the dividing element between the product for packing and the environment.
Requirements ...
With Model 101 TesT offers you a compact and lightweight one-pillar traction / compression testing machine. Due to its compact dimensions ...
These test frames are very similar to their universal test frame "cousins" but all the hardware required for tensile testing functionality has been removed. These Compression ...
These rugged electromechanical testing machines are designed to test metals, composites, rigid reinforced plastics, webbing ...
Horizontal Tensile Testers
For maximum tensile testing throughput and capability, Tinius Olsen offers a range of horizontal tensile testing machines in capacities of 5 kN (1,000 lbf), 25kN (5,000 lbf), 150 kN (30,000 lbf) and 300kN (60,000 lbf).
Our horizontal ...
The 5820 bench top system from the 5800 Series range is a low cost stand-alone test solution. ...
The 5830 is a 19 inch Rack mountable version of the 5800 Series and can easily be incorporated in any solution to provide ...
Multi-Strategy Test System 5850 - Floor Standing
The 5850 is the complete test system, with a dedicated 3456 test interface actuated by a AC motor to compress over 10,000N of force. The system controller ...
It is a universal testing machine capable of carrying out tensile, compression, bending, and shearing fesfs. Operation is manual, semiautomatic, and automatic. The test instrument ...
Spring-pressing automatic equipment. It can be combined ...
It is a universal testing machine capable of carrying out tensile, compression, bending and shearing tests. Operation is manual, semiautomatic, and automatic. The test instrument can be modularised ...
Description:
* Programmable high / low setpoints for go/no-go testing. Light and sound signal output
* Peak-Hold Function
...
Description:
■Speed accuracy:2 % of Max
■Various possibilities for fixture mountings (see accessory)
■Lowest starting point of the carriage above base plate: 171 mm
■Maximum carriage height ...
Description:
■Force controlled automativ switchoff (teststop after achieving an adjusted limit load)
■Repeat ...
The TABER® Rotary Platform Abrasion Tester - Model 5135 or 5155 is commonly referred to as the Taber Abraser (Abrader). This precision built instrument was developed to perform accelerated wear testing and is capable of providing reliable data in a matter of minutes compared to the years that may be required by in-use testing. Used to test a wide ...
The TABER® Webbing Abrasion Tester - Model 5820 is used to evaluate abrasion resistance properties of seat belts and other webbing products (e.g. safety straps, tie-downs, harnesses, helmet straps, etc). Common types of materials that can be tested with this instrument include ...
The Taber® Grit Feeder Attachment is used in conjunction with the Taber Rotary Platform Abraser (Abrader) to evaluate three-body abrasion caused by the destructive action of fine, hard particles. Originally referenced as the Frick-Taber test, this instrument has been used to ...
The PinPoint II R provides industry leading capability for the test and fault finding of the most challenging circuits. Allowing you to select and apply different test techniques ...
The S790 series 2, with its advanced hardware technology, represents the ultimate high-performance, mixed signal ATE system.
...
Designed from the outset with modularity and scalability in mind, the PinPoint Alpha system is flexible, adaptable and modular, allowing you to apply different test methods as and when you ...
The cable measurement device HCP 1000 from VisioCablePro® is ...
The extrudor measuring device VCPEx ...
By using the Hot Set Test you can easily perform an expansion and a heat pressure test of your cable samples. With this hot ...
MTII recently acquired the Fullam brand of miniature tensile, compression and bend testing machines specifically designed for use in Scanning Electron Microscopes (SEMs), Atomic Force Microscopes (AFMs) and Light Microscopes (LMs). The dual ...
The Proforma 200SA is a semi-automated thickness measurement system for both semiconducting and semi-insulating wafer materials. Built around MTI Instruments' exclusive Push-Pull capacitance technology, the Proforma 200SA delivers full wafer surface scanning at the press of a button. User defined and ASTM/SEMI scan patterns are used to generate ...
The Proforma 300SA is a semi-automated thickness measurement system for both semiconducting and semi-insulating wafer materials. Capable of handling 200 mm and 300mm wafers, the 300SA provides highly accurate, repeatable measurements of thickness, TTV, bow, warp, site and global flatness. Built around MTI Instruments' exclusive Push-Pull capacitance technology, the Proforma 300SA delivers full wafer ...
