Resato has designed a robust power pack, containing a build in pump with 320 mm air drive section.
Thie ...
Portable single BOP control unit
This portable compact unit is ideal for opening and closing all sizes of single or twin hydraulic ...
Portable Power Pack type WPS/DPS
The Resato portable power pack is a self-contained air-driven unit of proven design. Not only can it be used to pressurize valves, fittings, hoses, piping, vessels ...
The RapidScan3D is an innovative solution to the need for Ultrasonic NDT of modern engineering structures. Using high speed electronics, an ergonomic scanning arm, and a set of array probes based on patented technology, the RapidScan3D offers true 3D scanning at a fraction of the cost of contour following scanning gantries. the RapidScan3D now ...
Developed for pipe, pipeline and vessel testing the evolutionary ergonomic design of the Corrosion WheelProbe enables constant and even pressure to be applied in the testing environment, thanks to the conformable WheelProbe tyre, resulting in consistent and repeatable amplitude response. Excellent coupling
is achievable, even on rough corroded surfaces, thanks to the conformable water filled tyre. ...
The veo Phased Array ultrasonic flaw detector reinforces Sonatest's reputation for innovative technician focussed product development. The veo's simple controls, superior performance, advanced features and rugged enclosure deliver simplicity, capability and reliability to the technician's finger tips.
The veo's robust design, intuitive user interface and extensive online help brings the power ...
CP-1 QUALITY ASSURANCE SYSTEM
The quality of the riveted parts is guaranteed by using the CP-1 to control the riveting operation (OK/NOK). A pressure transducer and a linear transducer monitor the process and provide feedback to accept o reject the riveted part.
The riveting machine with this solution is suitable for units ...
ROMER Tube Inspection Solution
The ROMER Tube Inspection System can inspect and measure round metallic and non-metallic wire, tubing, and piping used in almost any industry - automotive, aerospace, shipbuilding, medical, machinery, ...
In-Process Wall Measurement
Adding to the success of the UltraGauge+™ ultrasonic measurement system, LaserLinc now offers the UltraPipe™, for in-process ultrasonic ...
AUTOMATIC NON DESTRUCTIVE TESTING EQUIPMENT FOR SURFACE DEFECTS
N. D. CAMSHAFT INSPECTION - AUTOMATIC NON DESTRUCTIVE TESTING EQUIPMENT FOR SURFACE DEFECTSEnlarge the imageEnlarge the image
A) Problem Description
Camshafts for automobile engines are manufactured using a variety of methods.They can cause a variety of quality defects, such as:
...
Life Cycle and Fatigue Product Testing
* Tests keyboards, keypads, membranes, snap-action switches, micro switches, general purpose switches and any product requiring fatigue testing.
* Up to 10 cycles per second (programmable).
* Measure circuit resistance ...
Measure Switch Resistance, Force and Displacement
FUNCTION:
* Force/Displacement
* Contact Resistance
* Test System
* PC Controlled
FEATURES:
...
Automatically Test & Verify Switches for Precise Force, Resistance and Displacement
The Model 951A Automatic Switch Test Station provides switch designers, manufacturers and distributors, as well as OEMs incorporating switches in their products with the most accurate, thorough, and reliable test station ever. Programmable features made the Model 951A equally suited for production, ...
Hydraulic pressure testing system that monitors and diagnoses fluid systems in a snap. Snap-Check enables machinery manufacturers to test system pressure quickly, easily, and leak-free. In the case of larger equipment, Snap-Check enables system pressure to be checked both after it is assembled at the factory and following ...
The PullTester 25 is a dual-range, motorized benchtop device for measuring pull forces of crimp connections ...
TRA3000 is a technically advanced CE tester. Individual modules or any
combination of modules can be fitted ON-SITE to give the most flexible and
cost efficient system available today.
Atmospheric sensors add Humidity, temperature and pressure to the test report.
TRA3000 ...
TRA2006
Capable of being equipped with ESD up to 15kV air discharge (requires ESD2000),
EFT, CWG up to 6kV (1.2/50μs open circuit and 8/20μs short circuit), plus the ability
to perform 100kHz Ringwave and 10/700μs surges up to 6kV.
AC dips/interrupts & variations plus DC interrupts. TRA2006 features a single phase
16A AC/DC CDN enabling ...
Repetitive damped oscillatory waves are phenomena associated with the opening and
closing of high voltage (HV) busbars in high voltage (HV) and medium voltage (MV)
power transmission stations. The physical environment influences the fundamental oscillation
frequency and repetition of the impulses. The most common type of switch used
in power distribution is an air insulated ...
DARE!! Instruments designed the RadiCentre® in order to enable full automated testing. All necessary devices and measuring instruments as well as the connections made between amplifiers, power meters, antennas and measurement receivers are controlled in an automated manner.
Where RadiMation® acts as ...
DARE!! Instruments introduces the RadiSwitch® plug-in cards that can be used with the RadiCentre® modular multifunctional EMC test system.
EMC test systems are complex installations with many test and measurement instruments ...
Monoblock suitable to roll and assemble pre-cut liners, mono-laminated discs ...
Online safety valve test system, PreVenTest
Pressure safety valves are installed on process equipment to release excess pressure due to upset process operations, external fires and other hazards. Or simply said; the safety valve serves to protect life and property. Failure of pressure safety valves to function properly when needed could result in the over ...
PORTABLE GRINDING AND LAPPING MACHINE FOR GATE-, PARALLEL SLIDE-, CHECK- & GLOBE VALVES 4 - 40" / DN100 - 1000 mm.
The ORBIT 24 is a robust, but light weight grinding and lapping machine for 'in-situ' or 'in-shop' repair of damaged valve seats. The unique set up ...
The V-Lap F6 is standard equipped with a range of grinding and centre plates for grinding and lapping any type and size of 'flat' seat up to 6" / DN150 mm. The centre plate keeps the grinding plate in position, but also gives ...
Distribution transformers are "mass production equipment"; high testing-throughput is ...
Tettex 2820a
(C, L & tan δ (Dissipation Factor) Measuring Bridge)
Accuracy capacitance 0.1%, tanδ 1x10E-4
The Dielectric-Loss Analyzing System 2820a ...
2840
[ High-Precision C, L & tan δ (Dissipation Factor) Measuring Bridge ]
Accuracy capacitance 0.02%, tanδ 1x10-5
The High-Precision Dielectric-Loss Analyzing System 2840 is designed ...
The ERSA mobile scope is a compact and handy, portable video microscope to inspect solder joints in electronic production environments. The device has been designed for optical inspection and digital image recording including measurements of solder joints on Ball Grid Array (BGA), µBGA, CSP and Flip-Chip packages. ...
The ERSASCOPE 2 now uses megapixel, digital USB 2.0 camera technology offering up to 400 % more resolution! Enhanced images allow for increased ...
The ERSASCOPE 1 is a re-designed system offering the award winning, original ERSASCOPE inspection capability at the lowest price possible.
ERSASCOPE 1 - Value ...
The CPC 100 + CP CU1 measure line impedances and k-factors on overhead lines and power cables. Ground impedances can also be determined on large systems with the CP CU1, as well as touch and step voltages.
Mains ...
The CPC 100 + CP CU1 measure line impedances and k-factors on overhead lines and power cables. Ground impedances can also be determined on large systems with the CP CU1, as well as touch and step voltages.
Mains ...
Combined with the CPC 100, the CP TD1 measures the capacitance and dissipation factor (power factor) with laboratory precision.
This allows the insulation condition of transformers, generators and other parts of high-voltage systems ...
