|
|
BENCHMIKE 283 - Off-line tube samples ID/OD/Wall Measurement System
For precision ID, OD, and Wall Thickness measurements, simply place a tube sample on the ID/OD/Wall fixture and the BenchMike will calculate all the dimensions. The ID/OD/Wall fixture can also automatically rotate a sample to a pre-defined number of positions for measurements at multiple points around the product. This rotation allows for the calculation of concentricity and ovality of the tube. The graphical user interface has options to view the rotational cross section of the product and a graph that shows deviation or variation at the various rotational degrees of measurement.
Features:
* Measures over tube samples of diameter from 0.075 up to 50mm (depending on fixture used)
* accuracy of +/-0.9micron
Benefits:
1- Ease of use & repeatability from one operator to another
2- Accuracy of measurements thanks to the laser scanning technology
3- User-friendliness of the graphical interface and of the principle of measurement
Several fixtures are offered to measure outside diameters/other dimensions of tubes: V-blocks, rotating mandrels, translation slides...
|
|
Model SC104V:
- Three independent channels allow full control of three devices
- Modular design permits addition or removal of channels
- Soft limits always visible on display
- Variable speed control through front panel or GPIB interface
- Rack mount option
- Fiber optic interface; ST connectors
- Full manual control from front panel
- 115 or 230 volts AC
- System diagnostics
- Six channels for remote switching of auxiliary equipment
- Compatible with industry standard automation software
- User friendly
- Expanded command set: SPEED, TARGET, SCAN, AUX
- LCD display
- Independent jog keys
- GPIB TARGET command
- Self-test
- Fully IEEE488.2 compatible
|
|
The innovative hydraulic pipe measuring points serv-Clip® for the MAINTENANCE OF YOUR HYDRAULIC SYSTEMS.
No only better …different!
* QUICK INSTALLATION (ONLY 3 MINUTES) - NO NEED TO CUT OPEN PIPES
* Type 1 NO SHUTDOWN of installations for mounting on pressurized pipes
installation of pressure switch, gauge and sensors, particle counters
* Type 2 SHORT SHUTDOWN of installations for mounting on NON-pressurized pipes.
add. to type 1- installation of flow rate, leackage, pressure, temperature and aqua sensors.
* Up to 630 bar / 9100 psi – screwed coupling M 16 X 2
* Particle measurement according to ISO or NAS classes
Technical Data :
* for diameters 10 - 42 mm / Tube (OD) 3/8" - 2"/ Pipe (ID) ¼" to 3"
* Working pressure up to 630 bar/ Steel wall thicknesses up to 5mm
* Working temperature from -40°C to +120 °C
* Viton O-Ring in leak proof clamp up to 200°C
COMBINE SERVCLIP WITH OUR FLOW RATE AND LEAKAGE SENSORS FLUID-CHECK AN ECONOMICAL AND INNOVATIVE CHOICE FOR YOUR MAINTENANCE.
|
|
The innovative hydraulic pipe measuring points serv-Clip® for the PROFESIONAL MAINTENANCE OF YOUR HYDRAULIC SYSTEMS.
No only better …different!
* QUICK INSTALLATION (ONLY 3 MINUTES) - NO NEED TO CUT OPEN PIPES
* Type 1 NO SHUTDOWN of installations for mounting on pressurized pipes
installation of pressure switch, gauge and sensors, particle counters
* Type 2 SHORT SHUTDOWN of installations for mounting on NON-pressurized pipes.
add. to type 1- installation of flow rate, leackage, pressure, temperature and aqua sensors.
* Up to 630 bar / 9100 psi – screwed coupling M 16 X 2
* Particle measurement according to ISO or NAS classes
Technical Data :
* for diameters 10 - 42 mm / Tube (OD) 3/8" - 2"/ Pipe (ID) ¼" to 3"
* Working pressure up to 630 bar/ Steel wall thicknesses up to 5mm
* Working temperature from -40°C to +120 °C
* Viton O-Ring in leak proof clamp up to 200°C
COMBINE SERVCLIP WITH OUR FLOW RATE AND LEAKAGE SENSORS FLUID-CHECK AN ECONOMICAL AND INNOVATIVE CHOICE FOR YOUR MAINTENANCE.
|
|
Engine Specific Fuel Consumption Measure-ment To Check The Engine-Specifications And To Control Fuel Cost And Engine Adjustments Is Now Possible.
Engine-related fuel consumption measurement in multi-engine systems is now possible with the KRAL Volumeter®. The further development of the approved fuel consumption measurement for Diesel Engines offers now:
The high measuring accurancy of the overall system is only possible by the precision of the individual KRAL Volumeter®.
The connection to standard-bussystems such as modbus and CANbus.
Improved casings, electronic, cable and sensors.
Improved spindle bearings for more resistance against abrasive fuels.
A monitoring function for analysing maladjustments of the fuel system.
Please consider that we are a manufacturer of high quality displacement pumps and flowmeters for liquids. The products (pumps with magnetic couplings, high pressure flowmeters and flowmeters – chemically resistant) mentioned on this portal are only part of our product range. Please find more detailed information on our website or directly from us.
|
|
KRAL Volumeter® for research and production test stands. Laboratory measurement precision is achieved despite fast flow changes and fluid oscillations.
The ideal conditions at the Bureaus of Standards however show the potential of KRAL precision. The screw spindle-metering from the KRAL Volumeter is on one hand very robust and handles the oscillation from pressure waves. On the other hand, the spindles are very quick and can follow fast changes of the flow velocity. Optional pressure pulse compensation is available that detects transient fluid waves.
Please consider that we are a manufacturer of high quality displacement pumps and flowmeters for liquids. The products (pumps with magnetic couplings, high pressure flowmeters and flowmeters – chemically resistant) mentioned on this portal are only part of our product range. Please find more detailed information on our website or directly from us.
|
|
DIRIS has been developed by Socomec over the last 10 years. It is a complete system for the operation of low and high voltage electrical networks and offers measurement and monitoring of electrical values, energy metering and management (electricity, water and gas), command and remote control of equipment and network protection.
3 highly-innovative products are being added to this range: the DIRIS A20, A40 and A41
Application:
All industrial or commercial LV/HV electrical installations
Original features and advantages:
The DIRIS A products meet all the requirements of installers and users:
- Easy to fit (compact casing, plug-in terminal blocks, a self test diagnostic menu to identify incorrect connection)
- Extremely accurate with high quality measurements using an ASIC component developed by Socomec
- Optimum readability with backlit, high-resolution LCD display
- Direct access to data via 4 or 6 keys
- Board can be upgraded with additional modules (communication, harmonics, alarms)
|
|
USB 1MS/s, 16-bit multifunction module with BNC inputs
- 1 MS/s 16-bit A/D converter
- 16 BNC differential analog inputs, with 7 programmable input ranges from ±100 mV to ±10 V full scale
- Over-sampling mode, including line-cycle rejection for low-level voltage measurements, even in the presence of AC power line noise
- 1 MS/s, 16-bit analog outputs
- 16 digital I/O
- 4 counter inputs capable of measuring frequency, period, pulse width, or quadrature encoders up to 20 MHz
- 2 timer outputs
|
|
Measurement Computing today announced the release of three new 1-MHz, 16-bit multifunction USB data acquisition devices, and a cost-saving expansion module for high channel count applications. The USB-1616HS, the USB-1616HS-2, and the USB-1616HS-4 deliver outstanding performance with synchronous analog, digital, and frequency I/O in one compact package. The AI-EXP48 plug-in expansion module coupled with any of the USB-1616HS series modules can quadruple the analog input channel count.
The USB-1616HS series modules have a unique, low-latency control output mode, whereby any input—analog, digital, or counter, can control an output—digital, analog, or timer, based on pre-defined limits, including hysteresis. The outputs are controlled directly from the USB-1616HS series module, and do not require PC intervention. This results in response times that are measured in microseconds instead of milliseconds
The USB-1616HS series offers extensive trigger options, ranging from analog trigger with 1 µs max latency, to multichannel triggering, where any combination of analog, digital, and counter input channels can be combined to initiate the trigger. Other trigger modes include digital pattern, level, edge, inside/outside window, and pre- and post-trigger.
|
|
Analog I/O
12-bit or less resolution
14 and 16 bit resolution
Temperature
Analog Output
High-drive Voltage
Voltage/Current
Voltage
Digital I/O
High Voltage
Parallel
Counter-Timer
|
|
|
The E-PDISO16 has one built-in 10/100 BASE-T auto-negotiation, high-speed communication port. With the Ethernet interface, you can remotely access and configure your E-PDISO16 from anywhere on the network. Only one computer can control the E-PDISO16 at one time. The networking protocol is TCP/IP. You can send your data over 100 meters at data speeds of up to 100 Mbps using only one Ethernet cable connected to your computer.
|
|
MCC has announced the addition of two battery powered temperature dataloggers to its growing datalogger line. These battery powered dataloggers are offered in two models: the USB-501 for remote temperature logging, and the USB-502 for remote temperature and relative humidity logging. These products are the perfect, cost-effective solution for long or short-term data logging applications. Both the USB-501 and USB-502 log up to 16,382 temperature measurements in the -35 to +80 ºC (-31 to +176 ºF) range. The USB-502 additionally supports up to 16,382 additional relative humidity measurements over the full 0 to 100 percent range. Rates for both dataloggers can be set from 10-second to 12-hour intervals. The loggers plug directly into a standard PC or laptop USB port for setup and data download. The included USB-500 Series Data Logging Application software supports both products. This user-friendly, intuitive software is used initially to configure the loggers, program alarm thresholds, logging rates, start times, and measurement units. When the loggers are retrieved from the field, the software provides simple one-click access to download, display, and export the data.
With the included USB-500 Data Logging Application software, the user can display time-stamped temperature, relative humidity, dew point, and alarm limits on a powerful strip chart graph. The data can also be downloaded to a text or a .csv (comma separator values) file. Supporting these file types allows users to easily export the logged data to Excel. With one mouse click, spreadsheets and reports are easily generated. The software and USB-500 series dataloggers are compatible with Windows 2000/XP.
|
|
8-channel, Web-enabled temperature measurement modules :
- WEB-TEMP supports J, K, R, S, T, N, E,
& B type thermocouples, 2-, 3-, or 4-wire RTDs and thermistors,
and semiconductor temperature devices
- WEB-TC supports thermocouples only
- Built-in ambient CJC temperature sensor
- Independent temperature inputs
- Built-in Web server/Web page
|
|
| ... products without technical information |
| |
HBM supplies a wide range of digital and analog amplifiers, transducers and software for monitoring and optimizing production and assembly processes.
In the light of ISO9000 and legislation on the subject of liability and warranty, quality assurance is taking on an ever greater significance in present day manufacturing processes.
We supply a wide range of process monitoring and signal conditioning instrumentation for quality assurance or statistical process control in:
Monitoring of component assembly, e.g. engine and transmission assembly
Monitoring and control of machines and machine tools
Monitoring of metal forming, e.g. stamping processes
Monitoring of raw materials forming, e.g. injection molding, tablet pressing
Functional testing, e.g. force displacement testing.
|
|
Analog
Channel Expansion & Signal Conditioning
ISO-5B Analog Input Module Racks
ISO-5B Analog Output Module Racks
ISO-5B Series Modules
Simultaneous Sample & Hold Boards
Digital
DIN Rail Mounted Solid State I/O Modules
Electro Mechanical Relay Racks
Solid State Relay Racks
Solid State Relays for SSR-RACK48 Products
Solid State Relays for all other products
|
|
| ... products without technical information |
| |
With the PCI board APCI-3701 from Addi-Data the user can acquire up to 16 inductive displacement transducers of the type LVDT or Half-Bridge directly with a precision of
0.1 µm according to the transducer type. Now the board is also available as 1-channel version, and is delivered with the calibration and update tool SET3701. The new unique calibration tool SET3701 is divided in two parts: In the first one, the administration area, boards and transducers are selected and in the second one, the calibration part, the transducers have micro-calibration. In the administration part the installed boards of the type APCI-3701 are recognised automatically. In the board firmware 14 common transducers with all parameters are already available. The user also can select pre-calibrated transducers or just add customer-specific transducers. The assistant, with integrated help-file, supports the user step by step. After the calibration a board test is possible: For each channel a window with a graphic opens, which reflects all acquired data. The standard delivery also includes programming samples for LabView, Delphi, C, VB, etc.
|
|
Analog I/O
12-bit or less resolution
14 and 16 bit resolution
Temperature
Analog Output
12 bit or less resolution
14 and 16 bit resolution
Digital I/O
Counter-Timer
High Voltage
Parallel
Quadrature Encoders and Interrupts
Serial Communications
16 Port
4-8 Port
Single & Dual Port
|
|
Original Equipment Manufacturers-Use our USB- and
PCI-2500 series boards to build synchronous and
simultaneous analog, digital, and counter/timer I/O into your
own products and systems, and save money.
|
|
Analog Input & I/O
12-bit or less resolution
14 and 16 bit resolution
Analog Output
12-bit or less resolution
Digital I/O
Counter-Timer
Parallel
Special purpose
Serial Communications
LPT Port and 2
|
|
Analog Input & I/O
12-bit or less resolution
14 and 16 bit resolution
Analog Output
12-bit or less resolution
Digital I/O
Parallel
Quadrature Encoders and Interrupts
|
|
- 24 channels of digital I/O with selectable 3.3 V and 5 V logic levels:
- 8-bit Port A, 8-bit Port B, 8-bit Port C (may be made up of 4-bit C-HI, and 4-bit C-LO)
- Fully plug and play
- Emulates 82C55 mode zero
- Software selectable pull-up and pull-down resistor configurations
- Digital I/O lines are accessed through a 37-pin D-type connector
The PCIe-DIO24 is a 24-channel digital I/O board with selectable 3.3 V or 5 V logic levels for PCI Express bus compatible computers. The 24 bits function as an 8-bit Port A, an 8-bit Port B, and an 8-bit Port C, which may be further divided into two 4-bit ports (Port C-HI and Port C-LO).
There is a 10 kilohm pull-up/pull-down resistor network associated with each digital port. Their direction is software selectable and stored on the board, so the user can use the board in a different PC without running configuration software: simply set the board number in InstaCal.
The PCIe-DIO24 is connector and software compatible with Measurement Computing's highly popular PCI-based PCI-DIO24 and ISA-based CIO-DIO24 boards, making migration from the ISA or PCI bus about as simple as unplugging the digital I/O cable’s 37-pin connector from the old board and plugging it into the new one. The PCIe-DIO24 is also supported by the same wide variety of external relay and solid state I/O module racks.
The PCIe-DIO24 is completely plug-and-play. There are no switches, or jumpers on the board. All board addresses, interrupt channels, etc. are set by your computer's plug-and-play software.
|
|
| ... products without technical information |
| |
|
