|
|
|
|
|
|
The Lab Master® Slip and Friction is designed to precisely determine the friction characteristics of numerous materials. It removes operator variability from the test procedure with specially designed features to control sled placement rate, orientation/angle, dwell time, and removal.
APPLICATIONS
Flexible packaging, Foils, Paper, Corrugated, Coatings, Metal, Wood, Printing, Nonwovens, Rolling resistance, Writing instruments, Medical devices, Composites, Rubber, Linoleum, Textiles and Leather
SPECIFICATIONS
* Selectable speeds from 0.4 to 550 in. per minute (10 to 13,970 mm per min.)
* Travel distance is selectable from 1 to 8.5 in. (25 to 216 mm )
* Load Cell 50 newtons (11 lb)
* Meets TAPPI T549 and T816, ASTM D1894 and D4521, DIN 53375, and ISO 15359
FEATURES
* Integrated PC system running Windows™ based software
* User can pre-select test speed, delay time, and test distance
* Units are displayed in gram force or COF
* The ability to create user-defined test setup with built-in ASTM, ISO and TAPPI methods.
* Individual test speed selection for both static and kinetic COF
* A high-speed data acquisition system accurately locates and captures the static peak
* A computer controlled elevator system automatically lowers and raises the sled at a repeatable rate
* Automated Elevator System removes operator variability from the test procedure with specially designed features to control sled placement rate, orientation/angle, dwell time, and removal
* Optional peel attachment available for 180° adhesion or release measurements
* Optional heated platen available
|
|
|
A system specially designed for high precision measurements of compression. With its high reduction ratio, this manually operated test stand is well suited for the measurement of small springs with low force levels. The displacement sensor gives a measurement of the flexion or height measured under load with a resolution of 5 µm. The test stand is equipped with a set of adjustable limit stops. The measurement display shows the force and the displacement simultaneously and plots the graph curve for the spring. These data can be exported via the RS232 output of the display unit. The parallelism of the lower plate can be adjusted to ensure correct seating for the spring. An accessory kit can be used to make measurements on tension springs.
|
|
|
With its Centor Dual force gauge, fixed plate and adjustable plate, this unit can be used to test high capacity tension and compression springs. The command automatically determines the origin of the displacements and then stops the machine at a predetermined flexion value to measure the height under load. It is also possible to measure flexion, and cycles can be programmed. The instrument has an RS232 to store the results on a computer. Additional sensors are available to provide high levels of precision for springs with low force levels. Ready to use system. Supplied with a Ø 4 in fixed plate.
|
|
|
It is a universal testing machine capable of carrying out tensile, compression, bending, and shearing fesfs. Operation is manual, semiautomatic, and automatic. The test instrument can be modularised taking into account that the structure can house 3 permanently installed load cells for compression tests, and 3 sets of tensile grips for tests, including at break. Our system uses several cards (for axis and cell reader control) that are connected via CanBus to enable displacements to position or force at a feedback speed of 1000 Hz. Load cell reads are effected ì,000 times per second. Minimum indexing is 1/32,700 (this can be increased by slowing down load cell reading).
|
|
SF1491 EMSY Spring Tester
Capacity:
Model 1491:
Axial force: 50 kN (11,000 lbf)
Lateral force: 2.5 kN (560 lbf)
Applications:
The SF1491 EMSY Spring Tester is specifically designed to determine detailed force line (load center) information on automotive suspension springs.
About the SF1490 Series Spring Testers:
The SF1491 EMSY Spring Tester is a floor standing electro-mechanical testing machine equipped with Instron's EMSY load cell system that determines the true response vector of a coil compression spring under load. This information is used by spring manufacturers and suspension design engineers to develop suspensions for automobiles and light trucks with better and safer ride characteristics.
The system uses nine load cells to accurately determine the center of load position on the upper and lower spring bearing surfaces as well as all axial and lateral loads and moments generated by the spring.
|
|
|
|
|
|
The SPRINGTEST T1 series is a very simple and economical system for checking compression springs in one point. The force gauge gives the force applied, the displacement sensor on the side shows the flexion or height measured under load. With its revolving hand crank, it is designed to perform tests from low capacity (10N) to high capacity (2000N) with quick results. The manual test stand features a small footprint, durable design, portable and a optional a digital travel display. Combined with our Centor force gauges, the SPRINGTEST T1 can measure any compression spring in production or laboratory for an affordable price. The parallelism of the lower plate can be adjusted to ensure correct seating for the spring.
This package includes:
- Manual test stand TEX555
- Force gauge Centor Easy with internal sensor up to 1000N or external sensor for the 2000N version
- Digital ruler length 150mm
- Compression plate diameter 50mm
- Self-levelling plate diameter 80mm
- Certificate of calibration
|
|
Equipment for force and length control on compress/on and tension spring.
Manually operated spring tester with slow and fast speed.
Two adjustable loks to execute tests on two measures are pre-set.
C structure with 197 mm working height It's possible to insert o guiding
spring pin.
The instrument is equipped with diigital optic line for length measures with
0.01 division and electronic load cell for spring load measuring.
Automatic compensation of load cell' give.
DIGITAL
Force and lengths are visualized on two displays by operating the push button pane/. Kgs and Newtons are the commutabile units, however pounds and inches are available too, on request. The following functions can be pre-set m rough keyboard.
• AUTOMATIC ZEROSETTING.
• RECAllo-RATION.
• MULTICELI.
• TOLERANCES.
• DATA TRANSMISSION PS 232,
|
|
General features :
- Springtester for Traction and Compression tests
- Integrated Printer (thermal)
- RS 232 Data Output to PC
- Digital length measuring unit (Output only in its display)
High / low limits: Programmable high / low setpoints for go / no-go testing. Light and sound signal output
- Up to 10 mesured results can be stored internally
- Average result calcultion of the stored value possible
- Peak-Hold-Function to capture the max value
- Auto-Peak-Hold that automatically Re-Zeroes after 0 - 10 sec.
- Automatic Power-Off, programmable after 1 - 60 minutes
- Selectable Units: kg, lbf, Newton
|
|
|
Spring-pressing automatic equipment. It can be combined with different elements: vibrator, further pressing systems, camera for image analysis, dynamometer measuring both power and/or position, multi-way sorter.
|
|
TesT 205 screw testing machines were newly developed based on the
experience of many years and essentially consist out of 4 components:
- 1 force/torque transducer
- 1 machine frame with regulated drive, angle measurement and table
- 1 PC with integrated data acquisition board and motor control
- 1 Software package
The evaluation takes place in real time processing and online during
the test sequences. The force/torque transducer is patented. Its shaping permits the measurement of the 3 quantities: total torque, head friction torque and clamping force without influence of one quantity by one of the others.
Sequences can be programmed by yourselves using the general instructions existing in the software. The available finished software packages according to international standards or standards of the car manufacturers can be adapted to the individual desires of the user at any time.
|
|
CLUTCHES TEST STAND
Automatic production test stand for multidisk clutches. It executes running in and understanding slipping torque.
|
|
|
Four-ball friction testing machine is used under extraordinary high point touch pressure, through sliding friction, to evaluate the character of lubrication. Include index of PB, PD, ZMZ etc.
|
|
Spring tension-compression machine
Product info:They are used for tension-compression, torsion, fatigue, sorting and strength testing...
Spring Fatigue Testing Machine
Product info:They are used for tension-compression, torsion, fatigue, sorting and strength testing...
Spring Torsion Testing Machine
Product info:They are used for tension-compression, torsion, fatigue, sorting and strength testing...
Spring Sorting Testing Machine
Product info:They are used for tension-compression, torsion, fatigue, sorting and strength testing...
|
|
|
This machine is a new spring testing instrument,which use several advanced technologies so as to further improve the test accuracy and ensure the testing efficiency. The test load is divided into 3 grades so that the testing range is expanded. The machine can test 9 testing points at different speeds and return to the initial position automatically. 6 types of files can be stored for future usuage. It can also auto-revise the dis[lacement of the load cell. What's more, the machine also has function of peak value holding, overload protection, zero clearing at any test point, stiffness calculation, data retrieval, etc. It's suitable for the test of all precision extension & compression springs and testing fragile materials.
|
|
|
The T4B Spring Tester provides accuracy, repeatability and ruggedness in a system that that makes it adaptable to the users needs for spring and resilient material testing. A rotary encoder is incorporated into the head which allows the user to test a wide variety of springs on one tester while maintaining accuracy and repeatability.
|
|
|
The Model 2909 Clutch Durability Test Machine is used to measure clutch wear over extended operating conditions. Accelerated results of clutch durability may be examined over shorter periods of time and under extreme or typical operating conditions. Characteristics such as wear, slip, travel and engagement time may be viewed in real time.
|
|
|
|
|
|
The G500 PEM test station is specially designed to meet the needs of customers testing fuel cell stacks in the 12 to 30kW range. The FCATS™ G500 is the most stable and accurate fuel cell stack test station available. We have supplied approximately 100 FCATS test stations of this size to customers around the world; the majority to automotive OEMs and key stack developers. Compare that to our competition.
The G500 comes standard with HyWARE II, our proprietary control and automation software, the most stable, flexible and user-friendly testing control software available.
BENEFITS
Outstanding performance:
- Dew point control: +/-1°C
- Gas temperature control: +/-1°C
- Backpressure control: +/-2kPa
- Data acquisition rate: 10Hz
Superior reliability and maintainability: We have achieved superior reliability and maintainability through selection of the most dependable components, reduction in the number of parts, process flow simplification, and improved access to components.
- Only the highest quality components have been selected
- All electrical components are positioned for easy access via the front doors
- Reliability of the I/O has been improved by adopting an industrial I/O system
- Motors and pumps have electrical quick-connectors allowing easy removal for serviceability
- Use of sanitary and zero-clearance fittings allows easy removal of key components for serviceability
- Industrial door design includes mechanical hinge pins for easy removal of doors
- Robust welded steel frame, with powder-coated finish
|
|
|
|
|
|
The G700 PEM test station is specially designed to meet the needs of customers testing large stacks, generally for transportation and stationary applications. The G700 is the most sophisticated large stack tester in the world. It includes precise gas flow control using mass flow controllers, accurate gas humidification using contact humidifiers, stack coolant proprietary pressure control using a patented process, and expandable cell voltage monitoring capability. Reformate simulation and steam humidification are available as options. Several types of load banks including water-cooled as well as regenerative, are also available.
The G700 comes standard with HyWARE II, our control and automation software.
BENEFITS
Outstanding performance: After surveying our customers, we have developed the highest performing test stations available:
- Dew point control: +/-2°C
- Gas temperature control: +/-2°C
- Backpressure control: +/-2kPa
- Data acquisition rate: 10Hz
Superior reliability and maintainability: We have achieved superior reliability and maintainability through selection of the most dependable components, reduction in the number of parts, process flow simplification, and improved access to components
- Only the highest quality components have been selected
- All electrical components are positioned for easy access via the front doors
- Reliability of the I/O has been improved by adopting an industrial I/O system
- Motors and pumps have electrical connectors allowing easy removal for serviceability
|
|
|
|
|
|
SOLID OXIDE FUEL CELL TEST STATIONS
Our SOFC test stations are integrated measurement, testing and analysis systems, designed for the unique needs of the SOFC market. These test systems include gas mixing, humidification, pre-heating, furnace, heat recovery and water balance modules. Systems can operate on gaseous or liquid fuels. Operating temperatures range up to 1000°C and operating pressures may be controlled within 2 kPa even in low pressure / high flow applications. Systems come complete with a load bank and cell voltage monitoring.
Systems can be tailored to meet your specific requirements.
FEATURES
- Conditioning of reformed gas at precise temperatures and pressures to simulate SOFC reaction products
- MFCs can be bypassed and removed for calibration while the test station is operating
- Up to 9 inlet gases available
- Manual and fully automated testing capability
- Reliable and stable PLC control
- Programmable electronic load control with reactant-sensitive ramp rates
- Built-in protection from carbonization
- User-controlled alarm settings
APPLICATIONS
- R&D testing: Extremely flexible control system perfectly suited for R&D testing
- Durability: Reliable unattended operation, automated scripting capability facilitates long-term testing
|
|
|
|
|
|
The G100 and G200 complement our test product line and expands our capability in PEM single cell and short stack R&D testing. They have been designed to offer an accurate test station for the low power test market at a very attractive price.
HyWARE II: Our control and automation software offers exceptional functionality with a user-friendly graphical interface. HyWARE II, enhanced with our proprietary HyAL automation language and load following technology, comprehensively manages the full range of FCATS™ system parameters, including test station control, data acquisition, diagnostics, and safety subsystems. HyWARE II enables safe and reliable unattended operation.
BENEFITS
The G100 and G200 test stations have a number of distinct advantages, including:
- Optional workspace enclosure
- Automatic Nitrogen purge on safety shutdown
- Hydrogen sensor
- 2 separate PID loops for cell endplate heaters
- 17" LCD monitor and PC
- Generous workspace for the test article with Dri-Dek™ work surface
- Extensive 19" rack space available
- Optional liquid cooling capability
- Optional dry gas by-pass
- Optional water balance capability
- DMFC, and high-temperature PEM capability also available
- Performance Commitment: Review test data from our library of results or put your own fuel cell on one of our machines to try before you buy. Unlike others, our performance commitments are backed by extensive R&D using actual stacks, correct gases and by test engineers using traceable metrology.
|
|
The G20 is an economical complement to our PEM test product line with expanded capability in low power fuel cell characterization. The G20 has been designed for small active area, single cell R&D testing, with all the capability and sophistication of our larger test stations. The G20 comes equipped with the standard FCATS™ control software HyWareII, including HyAL automation language for dynamic 24-hour operation.
BENEFITS:
- Small footprint, convenient benchtop design
- Mass flow controllers for hydrogen and air with 100:1 turndown
- Humidifier bypass included
- Automatic nitrogen safety purge on shutdown
- Automated humidifier refill capability
- Zero-volt capable load bank
- 2 software controlled PID loops for cell endplate heaters
- Optional automated backpressure control
- 17" LCD monitor and desktop PC included
- Hydrogen sensor
|
|
500W PEM Fuel Cell Test Station:
The G40 and G60 test stations have a number of distinct advantages, including:
- Small footprint
- Optional fuel cell enclosure for operator safety
- Automatic nitrogen purge safety shutdown
- Hydrogen sensor
- 2 separate PID loops for cell endplate heaters
- 17" LCD monitor and PC
- Available 19" rack space
- Optional liquid cooling capability
- Optional water balance capability
- Optional dry gas bypass
- Optional software-integrated AC Impedance capability
- DMFC and High-temperature PEM capability also available
- Generous workspace for the test article, with Dri-Dek™ work surface
|
|
|
The MEDUSA Series Fuel Cell Test Stations are designed, engineered, and built by engineers and technicians that have been designing and manufacturing reliable electrochemical hydrogen systems for over 35 years. Teledyne's experience is unsurpassed resulting in the most precise, user friendly, and reliable Fuel Cell Test Stations available. Test stations are available in 3 model series -- the MEDUSA RD Series Stations for applications up to 3 kW, the MEDUSA RD Elite Series for applications up to 4 kW and the LS Series Stations for multiple kilowatt fuel cell stack testing applications up to 12 kW.
|
|
FCATS™ PEM fuel cell test systems offer full flexibility to test, control, and monitor the performance of fuel cells and stacks
FCATS (Fuel Cell Automated Test Systems), are designed to meet the wide-ranging needs of PEM fuel cell stack manufacturers, material developers, system integrators and research organizations. They offer full flexibility to test, control, and monitor the performance and durability of individual cells and stacks under a wide range of operating conditions.
|
|
Our high temperature systems are tailored to meet your specific requirements while providing certain consistent standards:
High precision instrumentation for reliability and repeatability
Rapid transient response capability
State-of-the-art HyWARE II software and diagnostics
Dynamic control of humidification
Reliable unattended operation
Advanced safety features
Worldwide service and support
Designed for serviceability with easy access and removal of components
Upgradeable with the ability to easily add new hardware
|
|
| ... products without technical information |
| |
|
|
