|
|
|
|
|
|
For the testing of furniture and furniture parts in correspondance with the standard we´ve developed, in cooperation with reputable and certificated testing institutes, a wide range of furniture test rigs and accessories. The basis of modular construction of our test rigs enables us to react with high flexibility to the broad testing requirements of industry and research. With our solution to run various testing modules with one complex control unit and an extensive testing software, we meet the demands with regard to analysis and documentation of testing results.
alternating bending test rig:
- testing of seat, back rest, arm rests, foot rest etc.
- basic test frame with variable-height main arm (electromotoric setting) and transversal arm (manual setting)
- wide range of fixtures included
- it´s possible to be equipped with up to 4 load controlled or load/path-controlled actuators (pneumatic test axles)
- testing forces up to 1500 / 2500 / 4500 (!) N depending on actuator module
- testing height up to 500 mm
- Operation with the central control unit
|
|
General features :
- Springtester for Traction and Compression tests
- Integrated Printer (thermal)
- RS 232 Data Output to PC
- Digital length measuring unit (Output only in its display)
High / low limits: Programmable high / low setpoints for go / no-go testing. Light and sound signal output
- Up to 10 mesured results can be stored internally
- Average result calcultion of the stored value possible
- Peak-Hold-Function to capture the max value
- Auto-Peak-Hold that automatically Re-Zeroes after 0 - 10 sec.
- Automatic Power-Off, programmable after 1 - 60 minutes
- Selectable Units: kg, lbf, Newton
|
|
For the testing of furniture and furniture parts in correspondance with the standard we´ve developed, in cooperation with reputable and certificated testing institutes, a wide range of furniture test rigs and accessories. The basis of modular construction of our test rigs enables us to react with high flexibility to the broad testing requirements of industry and research. With our solution to run various testing modules with one complex control unit and an extensive testing software, we meet the demands with regard to analysis and documentation of testing results. Our plc-controlled test rigs are conceived for users which need both furniture testing corresponding with the standards and an easy handling.
|
|
A full range of Valve Test Rigs and Benches are available from Hydratron which are suitable for testing all kinds of valves including pressure relief, safety relief, ball, needle, gate, butterfly, globe and actuator controlled valves.
Valves can be tested using either gas or liquid as the test medium at pressures of up to 30,000 PSI ( 2,000 Bar )
Hydratron can supply test rigs having either screwed test stubs on to which test flanges can be screwed or fully adjustable hydraulic clamping systems. Interlocked test compartments can be included so test pressure cannot be applied to the valve under test until the valve is fully clamped in position.
Basic manual controls are standard but fully automated PLC controlled test rigs can be especially manufactured to order.
Full instrumentation is provided whilst full data logging is an option which allows charts of the test to be printed and data to be stored for future reference.
|
|
|
Spring-pressing automatic equipment. It can be combined with different elements: vibrator, further pressing systems, camera for image analysis, dynamometer measuring both power and/or position, multi-way sorter.
|
|
Fully automatic test bench to test all compressed air breathing apparatus, masks and total encapsulating suits. Bar code and transponder reader, Web Cam to record the pressure gauge indication. Comes with complete test and administration software.
- Fully automatic
- Preset test programmes
- Barcode- und transponderreader integrated
- Webcam for gauge check
- Linked to material management software
|
|
Pressure range up to 1250 bar / 18,000 psi
Suitable for Air, Nitrogen, Argon, Helium and a wide range of other gases
Provided with Resato air-driven single acting, double acting or two-stage gas booster
Water-cooled Oxygen boosters available
All stainless steel construction
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
Pressure range up to 3650 bar / 50,000 psi
Flow up to 50 L/min
Suitable for water, oil, and a wide range of chemicals
Provided with reliable Resato air-driven pump
Low noise level even at high cycling speed
All stainless steel construction
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
|
These standard systems are made of stainless steel and have a working pressure up to 2400 bar and a flow capacity from 0 to 37 ltr/min. They are compact, easy to handle and ready for use. These systems are often used for pressurising vessles, tubes, fittings, fire extinguishers, hoses and valves.
|
|
Resato has designed a robust power pack, containing a build in pump with 320 mm air drive section.
Thie biggest benefit of this unit is the high flow combined with high pressureoutput, by use of only one pump. Simple construction leads to easy and low maintenace.
This mult-purpose unit is suitable for:
- Pressure testing of large objects.
- Chemical Injection.
- Generating hydraulic power.
|
|
|
Test Benches, Cold generator group, Air generator group, Pulse benches, vibration benches with two or three axes Y or Z...
|
|
MECHANICAL TEST RIGS
Rigs for automotive, railway, aerospace and civil engineering testing :
- Seating test rigs
- Safety belt test rigs
- Suspension component test rigs
- Steering test rigs
- Transmission test rigs
- Test rigs for structures
- Test rigs for shock-absorbers
- Test rigs for rail bogies
- Tribometers
- Crash-test installations, etc.
FLUIDS TEST RIGS
Rigs for automotive, railway, aerospace, agricultural and civil engineering testing, measuring instruments :
- Static pressurisation
- Dynamic pulsed high-pressure testing
- Bursting tests
- Characterisation of circuits and components
under flow and under pressure
- Leak-testing...
Types of fluids that can be used :
Mineral oils, PAG oils, Skydrol, organic esters, glycol solutions, pure ethylene glycol, fuels, air, nitrogen.
|
|
TesT 205 screw testing machines were newly developed based on the
experience of many years and essentially consist out of 4 components:
- 1 force/torque transducer
- 1 machine frame with regulated drive, angle measurement and table
- 1 PC with integrated data acquisition board and motor control
- 1 Software package
The evaluation takes place in real time processing and online during
the test sequences. The force/torque transducer is patented. Its shaping permits the measurement of the 3 quantities: total torque, head friction torque and clamping force without influence of one quantity by one of the others.
Sequences can be programmed by yourselves using the general instructions existing in the software. The available finished software packages according to international standards or standards of the car manufacturers can be adapted to the individual desires of the user at any time.
|
|
|
Automatic production test stand for assembling, running in and testing of rear brakes of operating machines.
|
|
CLUTCHES TEST STAND
Automatic production test stand for multidisk clutches. It executes running in and understanding slipping torque.
|
|
High-pressure hoses or hose assemblies have to be tested before delivery. The requirements are going further then only pressure testing. More often end users ask suppliers for more specific characteristics of hoses.
Resato hose testing machines are delivered to end users in a production environment as well as hose distributors and hose testing laboratories. The Resato machine will give you a certificate which is your quality release document.
Examples of applications in the hose tes
Hydraulic pressure testing.
Gas pressure testing.
Burst pressure testing.
Length, rotation and expansion measurements during pressurization.
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
|
|
|
|
Control valve test rig
Ventil manufactures a wide range of control valve test units for testing and (re)adjusting all sorts of Globe-, Camflex-, and Waver type control valves according to the international test standards as ANSI/FCI. The Ventil test units can be used for;
* Seat leakage testing and classification
* Body testing
* Stroking the trim
The optimal functioning of the Control valve not only exists of sufficient body & seat tightness, but more important, the total "performance" of the valve and its controls! For an accurate and reliable working effect the valve body, actuator, positioner, regulators etc. most work in a strict harmony!
Control valve test unit capabilities
* Range DN15 - 900 mm. / ½ - 36"
* Horizontal (stem vertical) or tilting clamping system.
* Clamping on the inlet flange, both flanges or (proportional clamping) between the clamping tables.
* 1 - 2000 tons of clamping force.
* With no or limited linear force on the valve body.
* Test pressure range: from vacuum up to 2000 bar / 30,000 PSI.
* Leakage range 0 - 1000 ln/min. 2100 scfh.
* Test- & operation of all sorts of linear or quarter turn actuators and controls.
* Test medium: Liquid, Compressed Air, Nitrogen, Helium or Hydrogen.
Optional features
* Computer registration system.
* Valve performance testing, considering; measuring of the stroke measuring,
open/close time and torque measuring.
* Fugitive emission and cryogenic test facilities.
|
|
HYDRAULIC PUMPS AND MOTORS TEST STAND
Automatic production test stand for hydraulic pumps and motors.
|
|
BPVF1 is a test stand used for the check of the obstruction degree of oil filters.
Particularly it is used to check the efficiency of overhauled filters.
The test carry out an equal oil flow, at the same time, trough the new filter and the overhauled filter.
With a check of the pressure drop we can identify the acceptability or not of the filters
|
|
|
Four-ball friction testing machine is used under extraordinary high point touch pressure, through sliding friction, to evaluate the character of lubrication. Include index of PB, PD, ZMZ etc.
|
|
|
The MEDUSA Series Fuel Cell Test Stations are designed, engineered, and built by engineers and technicians that have been designing and manufacturing reliable electrochemical hydrogen systems for over 35 years. Teledyne's experience is unsurpassed resulting in the most precise, user friendly, and reliable Fuel Cell Test Stations available. Test stations are available in 3 model series -- the MEDUSA RD Series Stations for applications up to 3 kW, the MEDUSA RD Elite Series for applications up to 4 kW and the LS Series Stations for multiple kilowatt fuel cell stack testing applications up to 12 kW.
|
|
|
|
|
|
Cylinder Test Stand
Standard:
• ISO 11439 • ISO9809_Part1
Application:
•Computerized cycling test stand widely used for (CNG) cylinders'inspection and testing, such as cycling & strength test as well as other pressure vessels, portable fire extinguishers, etc.
•Service Object: product inspection, R&D Dep of cylinder manufacturers, supervision and examination station of product quality, labs of institutes, etc.
Technical data:
•Test pressure: Max.80Mpa
•Test port: 1 port (or Customized)
•Test medium: Hydraulic oil/ Water
•Constant pressure precision: -2%～+2%；
•Timing Range: 0~1000h
•Frequency: Max.15cycles/min
•Pulsing cycles: ≥1 million cycles
•Power source: 220V AC
•Dimension:a)Power Station: 1800 mm ×1000 mm × 1800mm
b)PC console: Customized Size
Features:
•Automatic operation controlled by PC + PLC. High speed data acquisition system supports real-time display of pressure values, time and pressure-time curves, etc.
•Test result saved automatically when emergency or power down happens accidently.
•User configuration on output pressure, frequency and the rate of pressure rise is allowed.
•Stable and reliable IVS test software, easy operation and monitor.
•Emergency stop system protects operators and equipment to the utmost extent.
•World-class Pumps, valves, tubing and fittings provides high test precision, stability, and easy maintenance.
•All hydraulic parts are made of 316 stainless steel material, suitable for most of the liquid medium.
|
|
GEARBOX TEST STAND
Test stand for RTM 322 engine gearbox Speed: 45.000 rpm Fluids: MIL-L-7808 oil, JP4 jet fuel
|
|
|
|
|
|
Hose Test stand
Standard:
• ISO 6803 • SAE J 343 • SAE J 1405
Application:
•For impulse test on automobile steering hose, brake hose, air-conditioner hose, fuel pipe, cooling water pipe, radiator hose, heater hose, air filter hose, turbo, Booster system hose , engineering hydraulic hose, aerospace hose & hose assemblies, other pipes or end fittings , heat exchanger , air conditioner, filter, etc
Technical data:
•Max impulse pressure: 70Mpa (Accuracy: 0.1Mpa)
•Test waveform: Basic Square Waveform, T Waveform, Triangle Waveform, Sine Waveform *(Optional)
•Frequency: 0~1.5Hz (Depends on the total volume & physical character.)
•Ambient temperature: Normal Temp or -40~150±3℃
•Medium temperature: Normal Temp~150±3℃ or -40~150±3℃
•Test pieces: 2-8 pcs (Depends on the total volume & physical character.)
•Test medium: Hydraulic oil or DOT
•Pulsing cycles: >10 million cycles
•Test waveform: Basic Square Waveform, T Waveform, Triangle Waveform, Sine Waveform *(Optional)
•Mounting mode: 1800 or 900 (As per the standard)
Features:
•Automated test system with high speed data acquisition system.
•History screen and real-time display of pressure-time curves.
•Test data saved automatically when emergency happens accidently.
•IVS test software is programmable, stable and reliable.
•Automatic pressure maintaining reduced the system working time, enhanced the stability, life time and testing pressure precision.
•Emergency stop against Overpressure/overload, rupture or leaks etc.
•Installing distance adjustable freely as per hoses’ minimum bend radius and test standards.
•Impulse test with flexing or without flexing. *(Optional)
|
|
.Hose size : 1/4" to 2"
.Max. test pressure 1.500 bar (21.000 PSI)
.Maximum hoses per test : 5 hoses
.Manifold : 5 outputs 3/8" Whitworth
.Test liquid : water
.Air inlet : 8 bar
.Internal light is optional
|
|
"BPSXX/A" are test stands for burst test and static test of flexible hoses or other hydraulic components. (Versions up to 3000, 5000 or 6000 bar)
BPS XX / A are test stands for burst test and static test of flexible hoses and other components as coupling, valves, cylinders etc, through a circuit with an
air driven pump.
The machines allows to test one component at the same time.
The connection system has two manifolds, one fixed and one movable. Is possible to test hoses with every type of fittings. The connection is made screwing the hose fitting to the adaptors thread.
The cycle of test stand allows:
- connection of the hose ( component );
- control of screw type;
- proof test: min. pressure 150 bar (2,175 psi) for BPS30 30 bar (435 psi) for the others
- burst test;
The test stand can use a hydraulic oil or also emulsion water-oil.
|
|
|
|
|
|
Hydraulic Test Stand
Standard:
•ISO 11439 •ISO9809
Application:
•Proof pressure test and volumetric expansion measuring for cylinders as well as other pressure vessels and portable fire extinguisher, etc.
Technical data:
•Test pressure: 0～200MPa
•Test port: 1 port (Or Customized)
•Constant pressure precision: ±2% F.S
•Constant pressure range: 2%～100%F.S
•Drive method: Air Driven (7bar compressed air)
•Volumetric expansion precision: ±0.1ml
•Water jacket sealing: Cylinder automatic seal
•Sensor accuracy: ≤±0.5% F.S
•Clamping Method: Hoisting
•Dimension: a) Power station: 1200mm×600mm×1000mm
b) Water Jacket: (according to the cylinder size)
Features:
•Water jacket method to measure the rate of expansion.
•Automatic operation controlled by PC. High speed data acquisition system supports real-time display of pressure values, time and pressure-time curves, etc.
•Test result saved automatically even when power down happens accidently.
•User configuration on output pressure and the rate of pressure rise.
•Stable and reliable IVS test software, easy operation and monitor.
•Large flow capacity water pump and weighing devices is provided, automatic reading of cylinder volumes, testing pump made in USA provides a wide range of output pressure.
•All high pressure valves, tubing and fittings made in USA with 316SS to guarantee high test precision and stability.
•Most of the liquid medium is available.
•water jackets designed as explosion-proof structure, safer and easier in operation.
•Emergency stop and automatically unloading the high pressure against power off, unnormal pressure or leaks etc.
|
|
|
|
|
|
Hydrostatic Test Stand
Standard:
• SAE.J517-100R • SAE.J2044-2002
Application:
•For Burst test and Proof Pressure test on various of Hose, Tubing, Pipe and Coupling.
Technical Data:
•Test pressure: Max. 400Mpa
•Test medium: Water/Oil (Optional)
•Medium temperature: -40℃~150℃±3℃ (Optional)
•Test pieces: 1 pc
•Pressure precision: ±0.5%FS (For higher precision, please contact the factory )
•Timing range: 0~999 h
•Driven air:≤7 bar compressed air
•Power: 220V AC
•Dimension: 1500mm×1000mm×1200mm
Features:
•Fully automatic operation controlled by PLC, supports real time display of pressure values and time, etc.
•Test time can be set freely, and automatically stops after finishing the test.
•Unmanned testing site monitored by camera at real time, (optional).
•All high pressure valves, pump, tubing and fittings made in USA with 316SS to guarantee the high testing precision and stability, and suitable for most of the liquid test medium.
•Automatically alarms and terminates the test against over-load,overtime and leakage.
|
|
Test benches
L’Orange developed a manual test stand that is designed for servicing fuel injection valves of medium class diesel engines. It combines assembly device, test stand and booster to one unit and is suited excellently for assembling and testing work on injection pumps, safety valves and similar precision components that require special care.
|
|
|
|
|
|
Online safety valve test system, PreVenTest
Pressure safety valves are installed on process equipment to release excess pressure due to upset process operations, external fires and other hazards. Or simply said; the safety valve serves to protect life and property. Failure of pressure safety valves to function properly when needed could result in the over pressure of vessels, exchangers, boilers, or other equipment they where installed to protect. It is essential to maintain your pressure safety valves and relief valves in good condition.
Periodically testing is one of the most important elements to proof that the safety valves will provide the so important protection. Obviously, the most desirable type of test is one that subjects the pressure relief valve to the full operating conditions that it is to endure in practice.
The Ventil PreVenTest system is a robust, but ingenious build system for testing all types and sizes of spring operated safety valves on-line, in process and under the normal operating conditions. The portable system enables you to proof the correct working and performance or identify safety valves in need of repair without plant shut-down.
Capabilities
- Unlimited range.
- Robust portable system.
- Universal and equipped for all brands.
Optional features
- ATEX Intrinsically safe version.
- 50 kN set for testing with no or a limited process pressure.
|
|
|
|
