|
|
|
|
|
|
The systems of tests of table of Series 5860 are appropriate ideally for the tests of force lower than 50 kN requiring a precise alignment or to test the large test-tubes. These systems use the electronics of acquisition and the most powerful order and the software Bluehill® 2 standardized in industry. Compared to the systems monocolonnes, the design bicolonne improves alignment and increases rigidity. These systems can be equipped with a vast range with jaws and accessories for the inflection, compression, tensile tests and component. The accessories available include/understand extensometers for the measurement of the deformations and the climatic chambers for the tests at varied temperatures.
Characteristics
Very high degree of accuracy: + 0.4% of the posted load (up to 1,0% of full capacity)
Very broad beach: Measurement bracket of force 500:1 (use of the sensor of force up to 0,2% of its capacity without loss of precision) with + 0.5% of the posted load
Precision of load +-0,5% of the posted load
High-speed acquisition of the data: 5000 Hz, synchronous on all the channels
Manual control panel studied for the operator well-being
Automatic recognition of the sensors of force and the extensometers
Compatible with the software Bluehill® 2 and FastTrack for 5800
Exist in extra-high and extra-broad version
The second space of test in option
Library of testing methods ASTM and ISO
Open architecture for programming of personalized tests
Total conformity with label EC
|
|
|
The new MultiTest range of compression & tension testers features test stands which are manufactured using a rigid aluminium base casting. The test stands have a fabricated metal housing, thus providing rugged instruments with a high degree of rigidity and strength.
|
|
Allround-Line
The Allround-Line satisfies strictest demands and performs superior test tasks. Add-ons are available and harmonized with the test machines for clear-cut operability. These test machines cover a wide range of applications.
High Capacity Machines
These are static testing machines for load forces up to 2000 kN.
|
|
|
|
|
|
Equipment manually operated for right and left torque control on springs with two ad{ustabfe stops for the angular position, with horizontal enb/oc structure with precision ball type guides- Its high definition electronic cell allows torque measurements while the angular positions are controlled by digital encoder with 0. / degree minimum division. The elasticity of the torquemeter cell is automatically compensated. This torquemeter is supplied with tables, adjustable in order to set the torsion point, and either operates with the relative zero given by the spring contact, or with the absolute zero given by the anvil contact. How it is conceived: The instrument provides direct torque measurement, which means it provides the same measurement at all times, including when connection points vary. Therefore, there is no need for accurate positioning of the drive arms.
DIGITAL
The digital part has a push button panel in order to visualize on two displays the torques and angles. Kgmm and Nmm are the commutable units and on request, British measures con be supplied. These functions are set with keyboard and they provide for:
• AUTOMATIC ZEROSETTING. Possibility to zeroset angle and torque on any point
• RECALIBRATION. Keys are provided far setting the sample torque, together with a key for storage.
• MULTICELI (optional). Electronic commutation key in case of more cells
• TOLERANCES. Three leds are far rates over/under/within tolerance
• DATA TRANSMISSION. The instrument is supplied with an RS 232 output
|
|
|
|
|
|
Instron's line of torque testers extends Instron's materials testing solutions by providing dependable torsion and axial-torsion testing capability.
These torsion testers utilize the familiar 5500 and 8800 electronics you've come to rely on. Available in capacities from 12 Nm (100 in-lb) through 13,000 Nm (120,000 in-lb) these test frames are versatile and easy-to-use for many applications including biomedical, automotive, aerospace and other industrial and consumer products.
The 55MT Series is a family of two table-top torsion testers.
55MT1 offers a 22 Nm (200 in-lb) capacity
55MT2 offers a capacity of up to 220 Nm (2,000 in-lb)
The 55MT Torsion Testers are based on a dual linear slide design, which provides for high torsional stiffness and minimal axial friction. The system torque cell is attached to a movable crosshead, which can be left free floating or clamped during testing. When left free floating, the user can apply an axial pre-load to the specimen using a weight and pulley arrangement. Closed loop servo control of the electromechanical drive is provided by Instron's standard 5500 electronics and Partner torsion software.
|
|
|
|
|
|
UNIVERSAL TESTING MACHINE CAPABLE OF CARRYING OUT TENSILE, COMPRESSION, BENDING AND SHEARING TESTS.
Operation is manual, semi-automatic, and automatic.
Testable objects include: springs, metal wires, plastics, cables, chains, hooks and other. The test instrument can be modularised taking into account that the structure can house 3 permanently installed load cells for compression tests, and 3 sefs of tensile grips for tests, including at break. Our system uses several cards (for axis and cell reader control) that are connected via CanBus to enable displacements to position or force at a feedback speed of Ì 000 Hz. Load celt reads are effected 1,000 times per second. Minimum indexing is 1/32.700 ¡this can be increased by slowing down load cell reading). The universal testing machine operates with computerized numerical control and includes a computer with HD and touch screen. It is a self-supporting, two-columns structure with ball screws. Its electronic setup enables cycles of stress of sinusoidal form which result in machine preservation and remarkable performance - notwithstanding the boll screw mechanism. DC power driven, encoder (or optical ruler}. The computer programme for this machine has entirely been developed by Easydur based on Windows XP, with internal files, statistics and certificate management in Excel format, which allows users free modularisation and customisation.
|
|
|
The inspekt mini is a very lightweight testing machine, which has been designed for simple standard tests or customer-specific, more challenging tests. It stands out due to its convincing cost/performance ratio and the user-friendly manner of operation. In connection with the testing software LabMaster, Inspekt mini machines can determine material characteristics of wires, foam plastics, elastomers, plastics, paper, cardboard, textiles, foodstuffs, and components in a quick and easy way.
|
|
|
The Inspekt series of universal testing machines offers the highest mechanic precision of all Hegewald & Peschke machines. It is also characterised by its first-class frame stiffness, modern control electronics, and a convincing cost/performance ratio. The size of the test spaces of the individual machines can be customized. Naturally, it is also possible to add one or more test spaces. Thus, the top-quality, rugged machines can be used for almost any testing task at the best reliability and accuracy.
|
|
Universal testing machines Inspekt table blue up to 20kN
The materials testing machines of the series Inspekt table blue are especially suitable for standard applications in quality assurance. Due to the high demand for cost-efficient testing machines, Inspekt table blue has been equipped with a simple, but multifunctional load frame. Depending on the demands and complexity of the testing task, it is possible to carry out tests with or without an external computer.
Universal testing machines Inspekt table up to 250kN
The material testing machines of the Inspekt table series have been designed for universal application in many different sectors of industry. Typically, they are employed in incoming and outgoing goods departments, research and development, and material testing laboratories. Hegewald & Peschke GmbH attaches great importance to the reliability and flexibility of its machines. Thus, Hegewald & Peschke GmbH uses only high-quality components.
|
|
|
|
|
|
Allround-Line
For optimum harmonization with the requirements of your test, the Allround-Line offers a variety of load frames, e.g. table-top or floor machines, with different maximum forces up to 250 kN, various heights and widths, or even with a second test area. And, of course, accessories like safety shields, temperature chambers, and further test equipment are also available in a wide range to meet your particular needs.
The test machines from the Allround-Line can also be operated with or without a PC as desired. The operation with standard PCs (no additional card necessary) and the test software testXpert® offers you the highest operating comfort, efficient data analysis and statistics, and performant networking functionality.
The test machines are all equipped with our proprietary electronics console testControl.
Advantages:
Mechanics, electronics and software as a modular system for customization with our add-ons
Crossheads with uniform mechanical interfaces for shorter re-equipment times, ideal when alternating test types
High crosshead travel and a wide test area
Robust and sturdy industrial drive system
Wide range of test equipment available for a large spectrum of applications
Ergonomic working in a seated or standing position
|
|
|
The vertical universal friction and wear testing machine model MMW-1A, is designed to develop all kinds of medium and high grade hydraulic oil and evaluate inspection testing machine, and the application and function is similar to FALEX No. 6 multi-function testing and measuring testing machine. This machine is standard testing machine to evaluate anti-wear character for lubrication grease or oil with ASTM D 4172-82, ASTM D 2266-81. And also is standard apparatus for evaluating oil, with hydraulic lubricant, anti-friction character in general petroleum and chemistry industry Corporation. With XBE34007-87. the above method is used four ball friction couple measuring relative anti-wear character for lubrication agent under the special testing condition. It is widely used in developing anti-wear hydraulic oil products.
|
|
|
The TABER Oscillating Abrasion Tester – Model 6100 is best known as an “oscillating sand tester” and is used to measure the resistance of a material to surface abrasion and scratching. It’s primary application is for transparent materials and coatings utilized in windows and lenses, but it can also be used to evaluate organic coatings, plastics, metals and other materials.
|
|
|
|
|
|
Coated and uncoated surfaces need to be tested for resistance to abrasion caused by a brush, sponge, or other means. Examples for testing include interior paints, wall coverings, carpets, floor tiles, polishes, bath tubs, shower stalls, and furniture.
Abrasion instruments producing repeated small-scale patterns of damage caused by attrition or erosion under controlled conditions simulate best everyday use or wear patterns. The rubbing method may also be used to test efficiencies of detergents or cleansers or to test the durability of an abrading or cleaning device such as a scouring pad.
The BYK-Gardner Abrasion Tester helps evaluate washability and abrasion resistance of a material. The tester reciprocates an abrasive force linearly over the sample.
- Reciprocating linear motion at 37.0 ±1 cycles per minute with a constant speed over a 10 inch travel
- Utilizes a brush, sponge, or abrasive paper to simulate real life situations that must meet several standards
- Completely enclosed electrical and mechanical components - for dry or wet testing
- Preset count-down counter with automatic shut-off and standard cycle counter provided for versatile testing
- Heavy-duty drive system allows for easy maintenance and a long-life
- Meets ASTM D 2486
The drive mechanism consists of a gearhead motor driving the motor drive pulley gear. The rotary motion of this gear drives a smaller gear, the chain drive pulley, using a timing belt. The smaller gear drives a set of sprockets and continuous loop mechanism. The cable pair ends are attached to the virtual center of the chain, transforming the rotary motion of the chain into the reciprocating linear motion.
|
|
|
This series is mainly designed for compression test of building materials (such as cement and concrete, etc.) and metallic & non-metallic materials. Equipped with special accessories, it can do bending test for components. With PC-electro-hydraulic servo control system, it can complete auto-control of test stroke and loading speed. Meanwhile, With PC, it can carry on collecting, processing, displaying, and storing data and it can display test load, the peak value of test load and the curves of test load Time on screen, auto-processor (according to corresponding test method) and store the processing results. With specially designed Window software, it makes the man-machine dialogues more perfectly. By using of mouse input, it operates more easily.
|
|
|
This machine adopts loading hydraulically with accurate and reliable test data. In order to guarantee the accuracy of test load readout, it adopts oil pressure transducer to measure the load, after amplifying, the test load, peak value and loading speed can be displayed digitally. The oil source is installed at the bottom of control cabinet in which there is a double-flow high-pressure piston pump driven by the motor. The hydraulic system is controlled manually with the functions of easy operation, safety and reliability.
|
|
Hydraulic universal testing machine
Thousands of applications worldwide prove that the hydraulic universal testing machines are with top quality, high accuracy and high reliability. It is ideal products for Q.C, Q.A. and R&D.
From the applications, the load frame includes:
1.Actuator at bottom
2.Top actuator
3.Load cell measured
4.Pressure transducer measured
5.Dual testing spaces
6.One testing space
7.Load capacity from 50kN up to 3000kN
Whenever you need quick operation or high accuracy servo control test, there is one suitable machine that can meet your requirement for different materials.
|
|
|
|
|
|
1. Performance Characteristic:
The resolution is 500000 Codes, Satisfy the related material experiments the method standard, Control and show automatically in experiment process, Have various control methods and curve forms(Include the true stress-strain), The trial report is programmable.
2. Basic configuration:
One host machine, one servo oil source, one computer of the upscale brand, one A4 color Ink-jet printer, one Germany DOLI EDC-220 apparatus for measuring and controlling, one displacement transducer, ATOS servo valve, one extensometer, one table for meter, accessories.
3. Main Specifications:
3.1. Max. testing tensile force:2000kN
3.2. Range of load measurement:20-2000kN
3.3. Accuracy of testing force reading:±1%
3.4. Accuracy of displacement reading: ±1%
3.5. Load resolution:250000 steps
3.6. Displacement resolution: 2%u03BCm
3.7. The speed of the piston:0-150mm/min
3.8. Rated pressure of pump:25Mpa
3.9. The max tensile space:0-1200mm
3.10. Amount of column:4 pole
3.11. Stroke of piston: ±350
3.12. Dia. Of gripping for round specimen: %u03A615-70
3.13. Thickness of gripping for flat specimen: 5~50mm
3.14. Size of down and up flat: 280×280mm
3.15. Dimension of frame:1400×920×5060mm
3.16. Hydraulic resource dimension: 1100×900×1200mm
|
|
|
|
|
|
Electro-hydraulically driven Weld Seam Testing Machine, Model 138
A testing machine made to the demand of several customers, to determine the properties of weld seams of Tailored Blanks. These are sheets "made-to-measure" enabling the production of components with optimum weight and function used to a great extent in the manufacture of automobiles to reduce weight. The high-strength metal sheets used require a high punch force for the deep-drawing test. The weld seam testing machine is a special version of our Universal Sheet Metal Testing Machine, Model 142-20, and is provided with a drawing force of max. 200 kN. The four-column frame with integrated test tool enables the test of sheets up to 300 mm wide. The infinitely variable blank holder force can be read on a pressure gauge whilst the deep-drawing index and the required drawing force are displayed digitally. The sensitivity of the integrated crack detector can be adjusted to the sheet metal quality by way of a potentiometer. After specimen failure the machine returns automatically to its initial position. To evaluate and store the measured data, it is possible to connect the machine to a PC using the corresponding interfaces. The Windows based software calculates and displays the measured values from the ERICHSEN cupping test, e. g. index E, elongation at rupture E in %, tensile strength E, n-value E. Furthermore the force-displacement diagram is recorded. Several tests can be shown in a chart.
|
|
Electromechanical Universal Testing Machine
Thousands of grips and standards for metal and non-metallic used in the worldwide of electromechanical universal testing machine provide a suitable solution of your demands.
From the applications, the load frame includes:
1.Single column
2.Dual columns with single testing space
3.Dual columns with dual testing space
4.Table and floor
5.Grips and software meets ASTM, ISO, DIN JIS, GB standards 6.Environmental test from -400 Deg. to 1100 Deg.
7.Load capacity from 1kN up to 600kN
|
|
|
|
|
|
This machine is mainly used for various materials of tension test, such as metal wire, thin plates, rubber, plastic, composite material, waterproof material, paper, spring, textile, yarn, wire and cable, and for all kinds of adhesive tapes of 90, 180 peel test. The material mechanical property can be obtained automatically according to different criterions, and a complete test report and curve can be printed out.
The Panasonic digital servo is introduced in control system of this machine, and equipped with high accurate pretightening ball screw for driving crosshead, photo-electric encoder for displacement feedback.
Adopt many passages of total digital CTS-500 system of AUTO measuring and controlling , having no the class to adjust, The reading accuracy is ±1% , The speed accuracy is ±1%,The displacement accuracy is ±0.5% , The resolution is 250000 Codes, equal to 7 sections, no subsection in full-measuring, Satisfy the related material experiments the method standard, Control and show automatically in experiment process, Can print the result of experiment, Have various control methods and curve forms, (Include the true stress-strain), The trial report is programmable.
|
|
|
|
|
|
This machine is mainly used for mechanical property test of concrete, high-strength concrete cement products and other materials.
Loading by high accurate hydraulic valves in this machine, the test space is adjusted by motor screw, and loading can be controlled by manual or automatically. This machine is controlled full-automatically by computer. The whole test process is completed according to stress rate of present curve. The load, speed, data and test curve can be displayed in dynamic.
Performance Characteristic:
The reading accuracy is ±1%, accuracy of loading speed is ±1%, auto closed loop control are processed by computer, loading speed is set discretionarily, loading is reposeful, controlled performance is good etc. Test data can be automatically processed, test report and curve can be print.
One host machine, one computer of the upscale brand, one A4 color Ink-jet printer, a set of high quality servo valve.
Adopts double-column host machine structure below 600kN.
Another EUR 56.00 is paid for an added Grip for concrete four points bend.
|
|
|
|
|
|
|
The machines adopt main unit, which is exported to Shimadzu Corporation Japan for the production of UH-F100A.It use Electrohydraulic Servo oil source, and servo valve imported from Japan. With reasonable construction, beautiful out-looking and high stability. With PC control system, they can realize the close loop control of test load, deformation of specimen, displacement of piston and test processor, and the screen display function of test load, peaking value, specimen deformation, piston displacement. The data processing result can be printed out and can be stored on disk in form of ASCII and can be transmitted through network. Especially the machine is supplied with analogue intelligent setting specialist system. The machine is mainly used to do tensile, compression, bending and shearing test for metal and non-material materials. The customer could set the test control mode automatically according to their requirement so as to conform the customers' special requirement.This series is mainly designed for compression and bending test of building material items, such as concrete, cement specimen and component, etc, also used for compression performance test of rubber pad and top forge test of metal.
|
|
|
Hydraulic static universal materials testing machines with seven different frame capacities to a max of 3,000 kN
|
|
|
|
|
|
WAW series are ideal for high-capacity tension, compression, bend/flex, and shear testing. It accords with the relative requirements of ISO, ASTM, JIN, GB and many other testing methods. These frames feature dual spaces so users can quickly change between tension and compression testing without having to remove heavy fixtures.
The oil cylinder is set on the bottom in this machine, the test space can be adjusted automatically by motor, hydraulic damp automatically, and with 4 adjustable columns.
The reading accuracy is ±1% , the accuracy of extensometer is ±0.5% ,Auto process data of Experiment with a computer, Satisfy the related standard of material experiments , Dynamically display load, elongation, load speed and real time trial curves, automatically calculate Rm (%u03C3b), %u03C3s, ReH (%u03C3su), ReL (%u03C3sl), Rp0.01 (%u03C3p0.01), R p0.05 (%u03C3p0.05), Rp0.1 (%u03C3p0.1), Rp0.2 (%u03C3p0.2), E and so on, can print on trial report and curves. Adopt digital frequency conversion to load, the speed is steady, consume of power is small, the noise is low, oil temperature is low for working long hours, operation is simple, safe and dependable.
|
|
These series are mainly designed for tensile, compression, bending and shearing test of metallic and non-metallic materials. With special accessory, they can complete mechanics performance test of rubber, belt, chain, steel, cable, cement, brick, concrete and other materials. They are wildly used in machinery, building engineering and material, space flight & aviation, railway, metallurgical, textile, petrochemical and production industry, scientific research institute, college, university and other fields.
|
|
Simple hand-operated Sheet Metal Testing Machine, Model 100
Recommended for use in factories and workshops where a low rate of metal forming is carried out on thin material. As a useful accessory, an attachable microscope with illumination is available making the detection of the cracks much easier. The blank holder force of 10 kN conforming to the standards, is applied by means of saucer springs. The deep-drawing index is displayed on an electro-mechanic pulse counter with a resolution of 0.1 mm.
|
|
|
The universal testing machines of Instron make it possible to test in traction and compression on the same frame. Moreover, some built permit the tests of constraints reversed. The tests can be of the traction type, compression, shearing, inflection, peeling, tearing, cyclic and inflection.
|
|
Tinius Olsen's line of Benchtop Materials Testing Machines are designed to test a wide spectrum of materials including metals, plastics, rubber, textiles, paper, yarn, wire, adhesives, ceramics, timber, foils, composites and finished components in tension, compression, flexure or shear. Maximum frame capacities from 1kN (200lbf, 100kg).
All testing hardware is fully complemented by Tinius Olsen developed software that turns your hardware into a sophisticated quality analysis system. Be sure to examine the software products to determine which package is right for your application.
|
|
These rugged electromechanical testing machines are designed to test metals, composites, rigid reinforced plastics, webbing etc. in tension, compression, flexure, shear, tear and peel. These machines feature high precision interchangeable loadcells, superior pre-loaded ballscrews and powerful drive systems that mean they can easily tackle the most challenging of applications.
Load frame capacities are 100kN (22,500 lbf), 150kN (33,750 lbf), 200kN (45,000 lbf) and 300kN (67,500 lbf).
All testing hardware is fully complemented by Tinius Olsen developed software that turns your hardware into a sophisticated quality analysis system. Be sure to examine our software products section to determine which package is right for your application.
|
|
The advanced 701 Universal Test System is ball screw driven test stands, excellent for affordable, precision tensile and compression testing of a wide variety of materials or products up to 500 pounds.
This variable speed tester has increased speed ranges and include adjustable travel limit switches. With the unique dual testing area, users can setup for two tests, tensile and/or compression, without having to switch out fixtures.
Sturdy ball screw drives allow for smoother operation and precise positioning. Stand include the ComTouch Total Control system on reverse side. These systems benefit from supporting a wider range of load cell capacities than other Com-Ten systems.
|
|
|
|
