|
|
|
|
|
|
The Falling Dart Impact Tester is intended for the determination of mechanical properties of packaging material such as plastic films, laminates and paper.
The tester comprises a horizontal base-plate on which a vertical column of steel has been erected and which on its top carries a release mechanism in which the falling dart can be inserted.
The dart consists of a hemispherical part of aluminium with polished surface and a diameter of 38.1 mm (1.5 in.), having a vertical shaft in the center of the flat top surface. Around the shaft additional weights can be fitted.
On the base-plate in the vertical center line of the inserted dart, a circular clamping device has been fitted. This clamping device consists of a firm and a movable cylinder, both having an inner diameter of 127 mm (5 in.).
By means of a handle operated excenter, a sample can be clamped slippage free between both cylinders.
The bottom of the firm cylinder has been provided with a 2-3 mm thick disc of soft rubber in order to eliminate damage of the falling dart.
SPECIFICATIONS
Falling Height: 660 mm (26 in.)
Weight of falling dart without additional weights: 50 g ± 0.5%
Additional weights: 5 pcs. of 5 g ± 0.5%
25 pcs. of 15 g ± 0.5%
5 pcs. of 100 g ± 0.5%
Falling speed on sample: Approx. 3.5 m/sec.
Meets ASTM Standard D 1709-62 Procedure A
Commercial Standard CS 227-59
TNO-Standard I.v.V. 2.15 1968
|
|
|
|
|
|
The Digital Ink Rub Tester is designed to measure scuffing or rubbing resistance. Several tests can be performed
including dry rub-the amount of transfer ink from one dry surface to another, wet rub-the amount of transfer of ink from wetted surface to another, wet bleed or transfer-ink transfer to a water-saturated blotter, wet smear-similar to wet bleed with the addition or rub cycles, functional rub/wet rub-smear or transfer tests using a liquid other than water and hot abrasion. An optional heated weight provides a uniform test for evaluating “hot abrasion” resistance of printed cartons, labels etc.
APPLICATIONS
Printing, Coatings, Packaging, Inks
SPECIFICATIONS
* Includes (1) 1.8 kg(4 lb) weight, (1) 0.9 kg(2 lb) weight, spare rubber pads, and scoring fixture
* Heated weights 2 lb and 4 lb available
* Replacement Pads available
STANDARDS
Meets TAPPI T-830 and ASTM D5264
* ASTM D5264 Standard Practice for Abrasion Resistance of Printed Materials
* TAPPI T-830 Ink rub test of container board
FEATURES
* Three speeds- The standard speed (42 cycles per minute) and two higher speeds (85 and 100 cycles per minute) allow you to decrease the testing time for samples requiring a higher number of rubs
* Large character LCD Display
* Displays count up, count down, test status and configurations
* Preset counts remain in memory
* Automatic shut-off
* Selectable “test complete” alarm
* Two-year warranty
|
|
|
|
|
|
Model: ZCJ1302-1, ZCJ1302-2, ZCJ1302-3, ZCJ1302-4
Max impact energy: 300J
Features:
This machine is for impact resistance test of various flats and pipes. It's the necessary test instrument for factories and scientific research institutes.
Full automatic control allows that automatically preventing a second time impact, automatically crosshead adjusting to zero , automatically specimen adjusting to zero, automatically crosshead returning to a predetermined height, and automatically detecting door closing state.
Special control panel and display can satisfy user operation and display requirements, for example, display real-time test data, height, velocity, and impact height setup. This system has power-off protection function, preset impact height data may not lose at power failure.
This instrument is applicable to test impact energy of plastics, ceramics, nylons, construction materials and other non-metal pipes and flats. Provide with automatic height control, display and drop control. Lower test platform adjustment is driven by motor automatically, which reduces labor intensity of operator and improves productivity.
|
|
Model: ZBC1400, ZBC1251
Capacity: 4J, 25J
Features:
The model ZBC1000 Pendulum Impact Testing Machine is mainly designed to perform special tests for plastic material to determine impact resistance performance under dynamic loading.
It allows continuous impact test for large quantities specimens. Special control panel and display can real-time display impact energy, impact ductility, pendulum raising angels.
Two display methods are available, dial type and digital type (LCD monitor).
It complies with ISO179, ISO180, ASTM D256, ASTM D4812, ASTM D4508, ASTM D950 and other similar standards.
Two models are available
ZBC1400, max Charpy impact energy 4J, max Izod impact energy 2.75J
ZBC1251, max Charpy impact energy 25J, max Izod impact energy 22J
|
|
|
|
|
|
TEAR TESTING
Tear testing determines the force required to continue the tearing of an initial cut in sheet materials. This is also used to evaluate strength of perforated materials such as postal reply cards.
The Monitor/Tear™ is an automated tear tester equipped with an optical encoder, measuring the angular
position of the pendulum during the tearing operation,
and converting this measurement to tear units.
FEATURES
•Digital display
•Storage and editing of up to 500 readings
•Easily interchangeable pendulums ranging from 200g to 6400g
•Auto calibration of pendulum
•RS-232
•Selectable units (percentage, millinewtons, grams)
•Settable limits, Statistics, Average, Standard deviation,
high/low results
•Grips and pendulum releases are pneumatic
•Clamp pressure in psi and kg/cm2
•Calculates and displays average tearing force for single ply values in millinewtons or gram force
•Report printout with optional printer
APPLICATIONS:
Paper, Foil, Film, Textiles, Nonwovens
PENDULUMS
•200 gram pendulum 83-11-02
•800 gram pendulum 83-11-04
•1600 gram pendulum 83-11-05
•3200 gram pendulum 83-11-06
•6400 gram pendulum 83-11-07
•Universal pendulum 200, 400, 800 & 1600 gram pendulums;
the required calibration weights are included 83-11-08
SPECIFICATIONS
Model: 83-11-01
Air: 600 kPa (instrument quality)
Weight: 10.4 kg (23 lbs)
Dimensions W x D x H: 12 in x 12 in x 20 in
(305 mm x 305 mm x 508 mm)
STANDARDS
Conforms to TAPPI T-414, ASTM D1922 and D1424, ISO 1974, CPPA d.9, AS/NZ 1301.400S, BS 4468 and SCAN P-11
Other Models
Standard Elmendorf Tear Tester (TMI 83-10-00)
|
|
|
|
|
|
Tear testing measures the force required to continue the tearing of an initial cut in sheet materials. Models and weights are available to test material with a variety of strengths. This is also useful to evaluate strength of perforated materials.
Also known as the Elmendorf test, the tearing test has been performed in the paper industry for more than half century in order to measure the mean internal resistance of cellulose or papers to the propagation of a deliberately initiated tear. It enables rapid determination of the dynamic resistance of materials designed to be subjected to strong shearing loads (e.g. newspaper) or liable to be damaged by sharp or heavy objects (e.g. paper bags, seat belts, protective clothing).
FEATURES
- Automatic specimen notching
- Mechanical-pneumatic clamping avoids sample slippage to ensure repeatable results
- Automatic pendulum reset with lifting device
- Tearing force displayed digitally
- RS-232 data output
- Small, table-top instrument
- Maintaining a uniform quality level
- Safety Hood protects operator from injury while pendulum is in motion.
|
|
|
|
|
|
The model ADF-Automated Yarn Strength tester is a robust, single end yarn tester designed to exceed the most stringent testing requirements for measuring yarn strength. The ADF-Automated Yarn Strength tester is capable of providing a variety of calculations including tensile strength, elongation, tenacity, work and modulus of an extensive range of yarns.
The unit is a fully automatic yarn tester and can continuously measure up to 20 bobbins of different types of yarns. Test result and data storage is made possible through the instruments serial port to a PC to collect test information. Advanced software provides multiple plots, force/elongation histogram, linear regression and average force curve of a bobbin.
STANDARDS
Meets ASTM 2256, BS 1932/1, DIN 53834/1, UNI EN ISO 206
SPECIFICATIONS
ADFW Automatic Yarn strength tester complete with one cell load, one set of clamps with faces, 20 positions creel - max. diameter 250 mm (9.8 in)
Measure Method C.R.E.- Constant Rate of Extension
Available Load Cells 20N, 50N, 200N, 500N
Speeds 20-5000 mm/min. (.78-197 in/min.)
Specimen Length 100-500 mm (3.9- 19.6 in)
Bobbins Can test up to 20
Power Supply 110V/60 Hz or 220 V/50Hz
|
|
|
|
|
|
The Internal Bond™ Tester is designed to determine the internal bond strength of a variety of Paper and Board materials according to TAPPI T 569. The instrument design is based on a falling pendulum which creates a high speed impact on a paper specimen. The paper specimen is sandwiched between two double-coated tape substrates. The pendulum impact measures the total energy required to delaminate the internal fibers of a specimen in a “Z” type direction into two separate piles. The system also incorporates an automatic sample preparation station which allows five specimens to be accurately prepared simultaneously.
APPLICATIONS
Newsprint, Fine Paper, Liner Board, Book Stock, Carton Board, Medium, Coatings, Laminates
FEATURES
* Storage and editing of up to 500 readings
* Selectable units (ft.lb/in², J/m² and kg•cm)
* RS-232 serial output
* Report printout with built-in printer
* Magnetic hammer release and magnetic brake
* Automatic calibration
* Automatic specimen hold-down during test sequence
* Settable limits, statistics-average, standard deviation, high/low results
* Automatic cutting of samples saves you time and keeps you safe
* 5.7 inch LCD color display with 320 x 240 resolution
* 15 Character alphanumeric keypad
* 6 function keys for easy test setup
* 10 soft key icons allow simple intuitive navigation of test functions
* Conforms to TAPPI standard T 569
|
|
Features
·Adjusting impact energy by adjusting the lifting height and mass of the weights.
·The buffer is equipped to absorb the residual energy after breaking the specimen to protect
the weight and anvil from destroying. Also install the safe outfit, such as safety net, safe pin for
maintenance and hanger locking.
·Equipped with the specimen-carrying outfit, anti-falling of outfit for the specimen, centering
outfit to guarantee quick, accurate and reliable tests.
|
|
Impact testing machine for metal and non-metallic
Impact test conforms to ASTM, ISO and GB standards with Charpy Izod and Tensile impact includes analogs, digital and computer. It is also with instrumented to get the curves and characteristic data for impact test.
From the applications, it includes:
- Measuring range from 300J up to 800J for metal
- Measuring range from 1J up to 50J for non-metal
- Charpy, Izod, Tensile impact for metal and non-metal
- Instrumented function can be with the impact test
- Lower temperature bath is optional for environment test
|
|
| ... products without technical information |
| |
|
|
