|
|
Toshiba offers a wide family of thermionic vacuum tube covers X-Ray tubes, X-Ray Image Intensifier, micorwaves tubes and a large variety of proportionnal counters.
Toshiba America Electronic Components, Inc. (TAEC) offers Magnetron Tubes for residential and commercial Microwave ovens as well as imaging system components for a variety of medical, dental and industrial applications. For the latter, the company has established itself as the single source for the complete image chain to meet the needs of all major applications. This product line includes x-ray tubes, a variety of image intensifiers (from 4- to 16-inches), optical units (lens, adapter and cover) and CCD cameras with up to 1K x 1K image resolution. All of TAEC's imaging components offer superior image sharpness, optimized uniformity and maximum image brightness. |
|
| ... products without technical information |
| |
The INFRA radiant module is the most classical expression for infrared heating for industrial buildings, sportshalls, ware-houses, poultry farms and glasshouses. The machine is made up of a burner working with forced induction in premix type Baf, with a multi gas head, exhaust fume electro fan, heat exchanger made up of special heat treated steel radiant pipes for high temperature; stainless steel reflecting metallic parabole and support hangers. It has low thermal inertia, and can heat single zones also with limited dimensions activating single modules, it does not move the dust in the air, does not take any space on the floor, it heats the bodies but not the air, so this means that the lower is building insulating, the higher are fuel savings that are achived with infrared radiant tubes.
|
|
Equipments suited for all environments with great height (form 4 to 20 meters) or with high thermal dispersion.
It includes a burner unit and a heat exchanger tube which reaches the temperature of 400 ÷ 550 °C., providing a very high radiation efficiency, also by means of the reflecting cover located over the tubes, which focuses the thermal flow downwards.
By means of a centralized equipment control system it is possible to heat only the areas concerned by operations |
|
2 solutions available : Radiant heaters « U-tube » (U) or linear (L)
Alimentation Natural Gaz or Propane, horizontal or inclined
4 sizes 13 / 22 / 35 / 50 KW
Option : Régulation, stainless steel reflectors, double skin, dilatation rings …
Various accessories : Regulation kit, fume kit, gas conection kit ... etc |
|
Applications:
heating or het-loss free transport of: oil, grease, wax, resin, tar, paint, water, carbon dioxide, plastics, sealants, etc...
Emplyable pressurised hoses of PTFE from DN 4 to 50 mm; pressure train depending on nominal width up to 600bar. |
|
HEATED HOSES - for gas and liquid transfer.
During Gas Analyzer Sampling, Hot Melt Transfer, Petroleum or Chemical Transfers, or Food Processing, it is needed to maintain critical temperatures, to avoid condensation of gas or drop in fluid temperature. Thermo Heated Hoses aptly cater to this need, by ensuring that the fluid in the process tube (part of the heated hose), looses no heat.
These flexible and lightweight tubes can withstand aggressive high pressure fluids and high temperatures involved in transfer of fluids.
Construction
Heated Hose comprises of a process tube bundled with insulated electrical heating element and wrapped with a heat reflecting foil. Temperature sensor is provided at about 300 mm from power connection end. This bundle is insulated and provided with an outer jacket. Ends are sealed suitably and electrical connections for both power and control are brought out. |
|
Application Pontencial:
Submersible heaters, containers, valves, pumps, form, process and plate heaters.
This mineral-insulated heating cable with a braiding of high grade stell 14541 is applicable within extreme corrosive and damp surroundings. The HIL heating cable is extremely robust and easy to bend. The stainless stell brainding is waterlight, oiltight and gastight. An utilisation temperature of up to 800°C enables a variety of applications. The cold end of the heating cable can be fed into a terminal box and connected by means of a MX20X1.5 screwed connection. |
|
| The heating sleeve is a special physical form that can be adapted to the specifications of tubes and cartridge. Conventional dimensions as well as special shapes for one or more casks can be realised. The finished heater consist of a heated inside tube, thermal insulation and an outer jacket. Theses are available in a diverse array of high- quality materials that can be selected to match the application. The compact design with self-regulating PTC heating elements or standard heaters with integrated regulation guarantee optimal functionality and the highest level of safety. |
|
| ... products without technical information |
| |
Controlled circulation, water tube boilers suitable for the production of hot water, and three gas passes.
They are realized both in vertical and horizontal version. They have elevated efficiencies (>91%) and are tested for pressures up to 36 bar and, for there dimensions, can be installed in reduced spaces.
They produce hot water in only five minutes and have minimum heat dispersions towards the atmosphere which guarantees a higher global efficiency in comparison with a traditional fire tube boiler NPR. Capacity from 116 to 10.000 kW. |
|
CT water tube type steam generators are the result of over 40 years experience of BONO ENERGIA in the industrial, petrochemical and power generation applications.
Engineered using the most advanced CAD systems, these generators guarantee the highest operating features, thanks to BONO's experience in heat transfer, welding technology and pressure vessel calculations. The production, carried out in Peschiera Borromeo facilities, is based on ISO 9001-2000 quality standards, with inspection plans for material, production process and final test.
CT series water tube steam generators represent a modern concept of "D" shaped desing, having two overmounted drums, expanded vertical tubes and full water walls type furnace. The water circulation inside the boiler is of the natural type.
The burner is housed inside the front water wall by means of properly shaped water tubes.
CONVENTIONAL FIRED WATER TUBES BOILERS (1,000 units world-wide installed)
Model
Clajtub CTD-S / Clajtub CTD
Configuration
Package / Site erected
Medium
Saturated and Superheated steam
Steam production
8 to 150 t/h
Design pressure
up to 80 bar
Steam temperature
300°C - 480°C
Thermal efficiency
up to 94%
Type of fuel
Natural Gas, Fuel Oil, Refinery gas, Lean gas, Reach gas, Coke Oven Gas, Process gas |
|
The three-pass wetback Yorkshireman range is ideally suited to heavy workloads. Add to this the latest combustion technology and control equipment and you'll achieve impressively low running costs and emissions.
Each boiler is individually tailored to your specific needs and manufactured from start to finish in our own factory. All fittings are mounted in the factory to make installation on site quick and easy.
The boiler can incorporate any make of burner to suit a wide range of gaseous or liquid fuels in single, dual or tri-fuel combinations.
Thermal efficiency (based on NCV) in excess of 90% (94% with the optional economiser unit).
External surfaces are heavily insulated and finished in tough, Aluzinc cladding.
Smoke boxes employ the latest ceramic fibre technology offering significantly less heat loss than traditional refractory.
The Yorkshireman range has larger heating surfaces and steam space than comparable boilers, meaning desirable low heat transfer rates, Low NOX emissions, easily achievable outputs, and quality dry steam throughout the firing range.
A wide range of accessories are available to further enhance the boiler; contact us for more details.
Outputs to 10MW (15,900 kg/hr) and operating pressures to 20 bar(g) available. |
|
STEAM-MATIC SM boilers have been developed upon BONO ENERGIA’s significant technical and technological expertise in manufacturing complex, high-capacity thermal equipment.
With over 10.000 installations worldwide, these boilers represent a remarkable achievement and a valid response to the needs of the industrial market which are combined with reliability and high performance.
STEAM-MATIC SM boilers are reliable: severe quality controls during all productive cycle, hydraulic and fire workshop tests before shipment, easy installation and maintenance represent, together with the proved quality of BONO ENERGIA SPA boilers design, the best guarantee for a very long service life.
STEAM-MATIC SM boilers offer superior performance: the innovative design of the pressure vessel ensures excellent heat transfer in two passes. The large volume of water and a wide steam chamber provide high working flexibility and a considerable steam reserve.
STEAM MATIC SM boilers are low consumption boilers, Bono technology ensures a thermal efficiency of 89% reducing consumption of fuel is to the minumim. Additional devices as Flue gas/air or Flue gas/water economisers or Integrated control system Optispark allow to reach 95%!
STEAM MATIC SM boilers can satisfy steam needs from 1 to 5 t/h. |
|
Byworth manufacture fire tube steam boilers in two ranges. The Yorkshireman and Yorkshireman2 ranges are highly fuel efficient three pass wetback steam boilers, available in outputs between 1000 and 18000 kgs per hour and working pressures from 100 to 300 psig (7 to 20 barg). The Yorkshireman2 achieves exceptional efficiency levels by the inclusion of unique XiD fire tubes. These increase the heat transfer from the tube passes by over 80% which in turn leads to overall efficiency of the boiler of around 93%. This is without the incorporation of a flue gas economiser. The Yorkshireman range is highly suited to arduous workloads and is extremely robust.
The MX range of fire tube boilers covers 250 to 5000 kgs per hour and is suitable for lighter workloads.
|
|
Vortex Tubes With Metal Generators, Stainless Steel Body:
Vortex Tubes are devices that work on a standard compressed air supply. Air enters the vortex tube and literally splits the air flow into two parts - cold air at one end, and hot air at the other - all without any moving parts.
Vortex Tubes have an adjustable valve at the "hot" end controls the volume of the air flow, and the temperature exiting at the cold end. By adjusting the valve, you control the "cold fraction" which is the percentage of total input compressed air the exits the cold end of the vortex tube.
Inside is the interchangeable brass "generator" which can alter the air used in the vortex tube, and control the temperature ranges you wish to have at the cold and hot ends. There are several ranges of generators for compressed air capacity. There are also two basic types of generators - one to produce the extreme cold temperatures (maximum cold temperature out called the C generator) and one type to produce the maximum amount of cooling (maximum refrigeration called the H generator).
WHY USE Frigid-X Vortex Tubes over others?
Vortex Tubes - Frigid-X are constructed of stainless steel and use a generator and valve made of brass and sealed with viton o-rings to allow their use in the widest range of environments. Others use plastic generators and standard Buna N O-Rings and charge extra for brass and viton. The unique design and quality of materials used in Frigid-XT™ products will deliver years of maintenance-free operation.
Frigid-X™ Vortex Tubes Advantages:
- No moving parts, reliable, maintenance free
- No coolant
- Compact and lightweight
- Low cost application
- Maintenance free units
- Instant cold air in environmental chambers
- No spark or explosion hazard
- Interchangeable generators |
|
Sub-Zero Temperatures From Compressed Air
Using only factory compressed air, ITW Vortec's Vortex Tubes generate temperatures down to
-30°F for spot cooling in a wide variety of industrial applications and processes. A Vortex Tube separates compressed air into hot and cold air streams, lowering the supplied air temperature by as much as 100F and delivering refrigeration up to 6000 BTUH. With no moving parts to break or wear out, Vortex Tubes offer reliable, maintenance-free operation and easy installation. Various models are available for specific cooling requirements and, at only 6" to 13" long, they serve as a very compact, cooling component on machinery and equipment.
|
|
| ... products without technical information |
| |
| Nogacool consists of a flexible Loc - Line® hose held by a magnet. It is used to easily direct cutting fluid from the coolant pump of machine tools towards the cutting area. |
|
| ... products without technical information |
| |
DIGICAT 100 Buried Service Locator
The DIGICAT 100 can be used to find live (energised) power cables, trace buried metal services which reradiate signals. The highly visible digital LED display makes a swift service location possible.
DIGICAT 200 Buried Service Locator
In addition to the well proven functions of the DIGICAT 100 the DIGICAT 200 offers a one stop depth estimation. In co-operation
with the DIGITEX 8/33 (operating in the 33kHz mode) the real depth and location of all services can be found. Available in two display formats, offering depth estimation to 3m or 10ft and an accuracy of approx. ± 10%.
DIGICAT 200 GIS Buried Service Locator
The DIGICAT200 GIS offers all the functions of the DIGICAT 200 with additional wireless connectivity. Compatible with a wide range of field proven hardware platforms and combined with simple interfacing with a variety of industry standard GIS software.
The DIGICAT 200 GIS is an ideal solution for systems integrators seeking to integrate buried service locating with GIS and survey mapping processes, using industry standard wireless connectivity. The advanced data output format provides system integrators with the opportunity to further develop innovative data capture and operational management solutions to meet new market opportunities. |
|
| For nuclear power plant steam generator tubes, Zetec's Compliant Low Noise (CLN) bobbin probe uses advanced materials, design, and production to provide clean eddy current data that is consistent through the life of a probe and the duration of inspection. The CLN probe's immunity to ambient noise sources and ability to dissipate electrostatic charges ensures reliable data quality and more consistent probe-to-probe performance. The CLN probe is highly flexible for navigating small radius u-bends, yet maintains high data quality and minimal data drift in straight sections. Whether analysis is automated or performed manually, Zetec's CLN bobbin sets a new standard for efficient and accurate inspections. |
|
The RD500 is a locator for underground plastic water pipes. A transonde is used to vibrate the water as it passes through it and across an internal spring system sending a minute sound wave back along the pipe. This sound wave is then detected using the RD500 receiver hence locating the water pipe.
Key features:
- Simple operation - a meter deflects showing pick-up of the vibrations on the water pipe
- No disruption of services while locating
- Audible and visual tracing indicator
- Variable Power Pulsers (TransOnde) supplied
- Distances up to 800 metres may be traced
- Locate up to 2 metre depth |
|
|
|
see the results for the following category