|
|
|
Thermtrol’s versatile TS Series of bulb and capillary thermostats is ideal for temperature switching applications requiring variable temperature setting ability and remote control. The standard Single Pole Double Throw contact configuration permits use of the thermostat as both a circuit shut down device and alarm signal simultaneously (if so desired). Fixed temperature and Manual Reset designs are also available. A variety of available features; a large in-stock inventory; custom design capability; UL, CSA & VDE approvals; and a surprisingly low price combine to make the Thermtrol TS Series an excellent value. Thermtrol Corporation…Your Partner in Thermal Protection!
|
|
|
|
|
|
We offer you a comprehensive program of metalblock thermostats for precise tempering of samples in the range of -20 up to + 600°C. The thermostats up to 210 °C are furnished with heating bathes for interchangeable or with permanently installed heating blocks. The standard product lines you will find on the following pages are:
HP "High Performance" Thermostats up to 130°C /210°C
BIO "BIO"Thermostats up to 130°C
HT "High Temperature" Thermostats up to 300°C/400°C
HC "Heating, Cooling" Thermostats -20°C up to + 130°C
EC "Economy" Thermostats up to 130°C / 210°C
LS "Life Sciences" Thermostats up to 130°C
QS "Squared heating sink" Thermostats bis 130°C/210°C
SPA "Special Applications" Thermostats dedicated for determined analytical methods or for material testing
Moreover we offer "tailor made" Thermostats pursuant to your individual requirements. Benefit from our experience in chemistry and particularly in the design of advanced metalblock thermostats. A qualified consultancy belongs to our range of performances. If you are searching for a safe nad most convenient solution by applying a "dry bath" instead of an water- or oilbath please give us a call +49 (0) 5205 87 963-0
|
|
Thermobil®
The Thermobil is the most flexible of the Liebisch thermostats. The interchangeable heating blocks (mono blocks) make it possible to perform different functions with one unit. If the dimensions of sample vessels change, replace the mono block.
The standard bore hole depht is 65 mm, the bore hole base is round or plane.
Technical data
- Sample places: 24 to 108
- Bore hole diameter: 5 to 20 mm
- Temperature range. AT to +200°C
- Heating rate: up to 5 K/min.
- Heating power: 750 - 1100 W
- Operating voltage: 230 V
- Housing dimensions: W x D x H in mm: 330 x 230 x 130 or 450 x 230 x 130
|
|
Thermtrol offers Texas Instruments' line of 1NT Klixon® fixed temperature thermostats. Approved by numerous testing agencies, all 1NT thermostats pass a series of rigorous quality control checks including continuity, function, contact resistance and dielectric strength. A wide range of operating temperatures, as well as a small size and a variety of physical configurations, pen-nit the flexibility to meet specific customer needs. In addition, a 1/2 disc thermostat can be packaged within a probe thermostat assembly to accommodate an even greater array of industrial and commercial applications.
|
|
The Thermtrol M Series is a premium thermostat for premium applications
requiring a long life, regulating thermostat. The long life capability of the M Series derives from its semi-permanent snap spring with flat, non-distorting twin bi-metal construction. A narrow differential maintains uniform temperature stability and a low thermal-resistant plastic housing permits the M Series to react quickly to temperature variations. All M Series thermostats are built on a per order basis to your temperature specifications and are not available from stock.
|
|
Available Temperature Range & Tolerances:
All models available over the range of 49ºC to 177ºC and are available in 1ºC increments (tolerances apply).
Contact Configuration and Current Ratings:
Model Contact Configuration Current Capacity
70M Normally Closed 120Vac/8Amp, 240Vac/6Amp
70MR Normally Open 120Vac/8Amp, 240Vac/6Amp
75M* Normally Closed 120Vac/10Amp, 240Vac/8Amp
120M Normally Closed 120Vac/14Amp, 240Vac/10Amp
325* Normally Closed Up to 50Amp LR
*Various current sensitivities available. Please inquire.
Tolerances:
Set 49ºC (120ºF) to 148ºC (299ºF): +/-5ºC (9ºF)
Set 149ºC (300ºF) to 177ºC (350ºF): +/-9ºC (16.2ºF)
|
|
Bulletin 837 Temperature Controls are heavy-duty control circuit devices used in industrial applications where the temperature must be maintained within preset limits. These devices use a vapor pressure technology to sense changes in temperature.
Bulletin 837 Temperature Controls:
Operating Ranges From -60%u2026570°F
Adjustable Range and Differential
Remote Bulb Sensing or Direct Immersion Types
Stainless Steel Bulb, Capillary and Armor Available
Variety of Contact Blocks Available
Open Type, Type 1, Type 4 & 13, Type 4X and Type 7 & 9 and 4 & 13 Combination Enclosures
|
|
Fields:
- Pharmaceutical and Biotechnical Industry
- Heating, Ventilation and Air Conditioning
Type: RT2E - Explosion proof
Fields:
- Pharmaceutical and Biotechnical Industry
- Heating, Ventilation and Air Conditioning
- Machine and Process Industry
- Power Plants and Distribution
- Automotive Industry
Type: RT2N
Fields:
- Pharmaceutical and Biotechnical Industry
- Heating, Ventilation and Air Conditioning
Type: RT2Y - Intrinsically safe
Fields:
- Pharmaceutical and Biotechnical Industry
- Heating, Ventilation and Air Conditioning
- Machine and Process Industry
- Power Plants and Distribution
- Automotive Industry
Type: RT
|
|
Horstmann's best selling, big value 425 Series programmers are the simplest way to control water and central heating in the home.
*Simple to use with easily understood settings adjusted in seconds.
*Easy to install, uses a 9 way standard backplate
*Diadem / Tiara 6Amp rated, Coronet 13 Amp rated
*Advance control to allow manual override switching ON or OFF
*Gives real comfort throughout the home
*Reduces heating costs
*Greatly increased energy savings
|
|
Electronic Temperature Switch TDD
Temperature Switch TWR
Thermal Reed Switches TRS
Frost Predection and Capillary Thermostat TEA-F, -K
Room and Surface Thermostat TEA-R,-A
Rod and Air-DuctThermostat TEA-L, -S
Thermostats for industrial Applications TER
|
|
Danfoss produces and markets a wide variety of Thermostats and Pressure Controls for refrigeration applications. The Appliance Controls product range comprises CFC-free electromechanical and Electronic Thermostats for refrigerators, freezers and light commercial applications produced to customer specifications as well as service thermostats for all refrigeration and freezing applications.
The Pressure Controls and Thermostats for commercial and industrial refrigeration covers numerous applications within refrigeration and air conditioning, and are divided into two categories: KP as standard and RT for heavy duty purposes. They are available for fluorinated refrigerant as well as ammonia.
Furthermore the category contains Oil Differential Pressure Controls, Cartridge Pressure Controls and Flow Switches.
|
|
Temperature sensors Thermotronik TT-77
- electronic temperature switch
- up to 4 programmable set points
- alternative continuous temperature signal plus 1 programmable set point
- window and hysteresis function
- two outputs programmable 1-100 Hz
- max/min. memory
- direct or remote installation
- LED display with status indication 270° rotatable
- standardized manu structure
- dip tube length up to 1 meter
|
|
Digital Temperature Switch - Series TSX
Dual Probe Input, Single or Dual Relay Output
Digital Temperature Switch - Series TST
Dual Probe Input, Three 8 Amp Relay Output, Alarm
Digital Temperature Switch - Series TSS2
PTC Thermistor Input, Two Independent Relay Outputs
Temperature Switch - Series M-51
Bi-metal, Double Adjustable, Automatic Reset
Temperature Switch - Series FM
Adjustable Deadband, Immersion Type
Temperature Switch - Series DA-7035N
Adjustable Deadband, Bulb and Capillary Type
|
|
Bimetal temperature switch with fixed switching point (60.8301)
electromechanical temperature switch with a fixed switching temperature
IP67 protection (max.)
simple installation
contact rating up to 2.5 kVA
The bimetal temperature switch lends itself to universal use. Areas of application include temperature monitoring/control and signaling in cooling and heating systems, compressors and motors.
The temperature switch can, to a limited extent, also be used as a temperature controller.
The temperature change is transferred to a mechanism via the fitting. When the switching temperature is reached, the temperature switch is activated.
|
|
* TS-3.5-3H freeze protection Switches :
TS-3.5-3H temperature switches is used for freeze protection or a low-temperature process control solution. such as gas-fired boiler,central air-conditioner, water pipes and solar power system.
* TSB-16-4L temperature switches :
TSB-16-4L temperature switches is used for temperature compensating of lower ambient temperature of ice-box.
* Temp.Switches for Toilet Seat TSB-45-8L :
The TSB-45-8L Temperature Reed Switches are best for heated water bidet type toilet seat and water temp heating control. It is optimum products for this appliance, high precision temp, measurement or temp. control in liquid, long service life, the electrical parts is epoxy sealed, ensure safety in using, good quality and low cost.
* Temp. Switches for Fish Bowl TSB-31-4L :
TS-31-4L Temperature switches is specially idea for fish bowl temperature controlling. With high reliability and durability.
|
|
|
Barksdale temperature switches offer superb stability and are the ideal choice for accurate stable measurments in critical applications.
|
|
PDTF Series
Temperature Switch
70°F to 285°F (20°C to 140°C)
Withstands Acceleration to 8G
Small Capillary for harsh applications
Gems PDTF Series is a factory set temperature switch for the protection of all types of internal combustion engines, pumps, compressors, gear boxes, hydraulic reservoirs, marine and industrial power plants. Model PDTF will withstand acceleration to 8G. Its compact and rugged construction allows it to be mounted in the toughest OEM applications. The PDTF utilizes a liquid filled capillary to sense temperature changes. The liquid expands as the temperature increases causing the capillary pressure to increase.
|
|
ASCO pressure and temperature switches are a range of miniature to industrial size switches designed to signal when process media reaches a set point of pressure or temperature. The transducer will operate a mechanical snap switch when the set point has been reached, and will reset when the process media conditions drop below the dead band. Options include fixed or adjustable dead band and a a wide range of set points of vacuum to 8000 psi and temperatures of -60ºF to 640ºF (-51ºC to 337ºC).
All switches incorporate a diaphragm-piston type pressure sensor or vapor-filled temperature sensor transducer with a fully adjustable electrical switch unit. The modules are mix 'n match, and can be field or factory assembled into more than 20,000 pressure or temperature switch variations right off the shelf.
|
|
Temperature Switch TSP 01 in Stainless Steel
TSP 01
Characteristics
Electronic temperature switch in stainless steel
pnp output
Temperature sensor: Pt100
Max. temperature measuring range: -30°C up to +150°C
Max. 2 switch points: closer or opener
Electrical connection: plug M12 or cable
Protection: IP65
Process connection: BSP ½"
Reasonable prices
Areas of application
Hydraulics, Pneumatic, Plant construction, Machine tools, Process technology, Chemicals, Water treatment etc.
|
|
|
Model 8253 Temperature Switches are ruggedly constructed and have precise set point adjust-ments for use where reliable monitoring of critical temperature conditions such as high water or oil temperature is necessary in engine installations or other high or low temperatures in heavy duty industrial applications.
|
|
-Precision stainless steel mechanism for arduous
atmospheres and high humidity.
- Set point adjustable over whole range against calibrated
scale with tamperproof adjuster.
- Weatherproof and Flameproof models.
- Models for fixed switching differential,
adjustable differential and HI-LO operation.
- Hermetically sealed microswitch option
|
|
800 Series
Product Overview
No external power required
SPDT or dual switch outputs
Stainless steel bulb and capillary
NEMA 4 enclosure
Optional capillary lengths & materials
Adjustable ranges: -180 to 650ºF; -117 to 340ºC
Approvals: UL, CSA, CE
|
|
Dresser Instruments manufactures a full line of high quality Ashcroft® pressure switches for the shutdown and control of many types of processes. The array of Ashcroft® pressure switches offered, meets application needs for industries such as off-road equipment, generators, compressors, turbines, off-shore applications, panels, pipelines, filters, blowers, wastewater applications and more.
|
|
Infrared switches recognize without contact hot objects in its measuring beam, to trigger a switch process. They are e.g. used for recognizing, counting or positioning of hot objects. The IMPAC Infrared temperature switches cover a temperature range between -40°C and 1500°C.
For detailed information please see:
www.impacinfrared.com/EN/products/temperature-switches.html
|
|
| ... products without technical information |
| |
|
|
