- Hydraulics - Pneumatics >
- Valve >
- Threaded check valve
Threaded check valves
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 0.375 in
Pressure: 150 psi
Temperature: 32 °F - 230 °F
... needle and check valve flow control that enables you to control the air flow from air cylinders thus controlling the piston strokes speed, while extending or retracting, depending on their circuit location. ...
Clippard
Pressure: 250 psi
Temperature: 32 °F - 230 °F
Shuttle Valve, #10-32 Male Outlet, #10-32 Female Inlets Notes Shuttle valves should not be used as a pressure selector. Flow from "A" to "C" or "B " to "C". Additional ...
Clippard
DN: 0.125 in
Pressure: 1,000 psi
Temperature: 32 °F - 230 °F
Check Valve, 1/8 Ports Notes Not intended for pressure relief Additional Information Air Flow 20 scfm @ 50 psig; 36 scfm @ 100 psig; 580 l/min @ 6 bar Force Cracks at approximately 1/2 psig Max PSI 0-300air/0-1000hyd Mount Direct ...
Clippard
DN: 10, 6, 12, 8 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: -5 °C - 60 °C
• Pilot check valve, Metal Body Type • For drop prevention and temporary intermediate stops • Three female thread / one-touch fitting port combinations • Body sizes: 1/8, 1/4, 3/8, ...
SMC
DN: 0.25 in - 2 in
Check valves These one-way valves are made with bronze and brass with a seal in NBR nitrile rubber or, upon request, in Viton®, only for series 10 ... 11. To ensure a practical assembly ...
DN: 0.25, 0.375, 0.5, 1, 0.75 in
Membrane check valves These valves have the same features of the previously described check valves, but they are made with anodised aluminium, which ...
DN: 0.125 in - 1 in
Pressure: 0 bar - 414 bar
Temperature: -56 °C - 204 °C
... broad choice of end configurations (variety of threads - BSPP and metric). Series 2000 is available with two valve options - Poppet valve or ball valve. This coupling system can be used ...
DN: 0.125 in - 1 in
Pressure: 0 psi - 3,000 psi
Temperature: 100 °F - 400 °F
Parker's CB Series check and filter check valves are a unique ball check design. These check valves handle uni-directional flow control ...
DN: 0.125 in - 1 in
Pressure: 0 bar - 414 bar
Temperature: -56 °C - 204 °C
Parker's CO Series check valves are designed for uni-directional flow control of critical fluids and gases in industries such as pharmaceutical,research and microelectronics. Parker’s CO Series Check ...
Flow rate: 38.3 l/min - 616.7 l/min
These check valves are mainly used on vacuum gripper systems containing multiple suction pads in order to shut off individual suction pads which are not covered. Thread size M5, G1/8, ...
DN: 0.25, 0.125 in
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 70 °C
... EAN code: - 8056686166792 Quantity per package: - 5 Minimum order quantity: - 5 Unit of measure: - items Thread type - Cylindrical Threaded port - 1/8"
DN: 8, 6, 4 mm
Pressure: 0.5 bar - 12 bar
Temperature: -20 °C - 60 °C
... thread-pipe connection with a brass nickel-plated male thread and a push-in fitting.It is still the only check valve with holes for wall mounting.
DN: 0.125, 0.25 in
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 70 °C
... two directions. EAN code: 8024986016567 Quantity per package: 10 Minimum order quantity: 10 Unit of measure: items Threaded port: 1/8"
DN: 10 mm
Pressure: 450 bar
Flow rate: 60 l/min
Size 10, A → B, hydraulically actuated Industrial hydraulic valve in a high performance range. Reliable blocking of the oil flow at selected ports. Seat valve Direct actuated
Bosch Rexroth - Industrial Hydraulics
DN: 6 mm - 30 mm
Pressure: 0 bar - 320 bar
Temperature: -30 °C - 100 °C
Size 06, 08, 10, 16, 20, 25, 30 • Qmax 400 l/min (106 GPM) • pmax 320 bar (4600 PSI) Poppet type check valve, guided in-line mounting or slip-in design Hardened precision parts Sharp-edged ...
Pressure: 12 bar
Temperature: -20 °C - 80 °C
... Technologies: • - Function fitting • - Pneumatic system • - Pneumatic fittings • - Control valve • - Pressure regulating valve • - Pressure regulator valve Technical Characteristics: • ...
DN: 0.125 in - 1 in
Pressure: 0.5 bar - 12 bar
Temperature: -10 °C - 120 °C
Controllable valves for compressed air control For regulating the compressed air supply to consumers
DN: 5 mm - 50 mm
Pressure: 420, 315 bar
Flow rate: 2.3 l/min - 400 l/min
... direction. No bypass check valve is therefore required. The flow control valve type SB and SQ is used to control the lowering speed of single-acting consumers. The flow control valve ...
Pressure: 0.5 bar - 10 bar
Temperature: -20 °C - 80 °C
Enables air to be exhausted quickly from air reservoirs and cylinders Allows higher cylinder speeds to be achieved Simple, compact design and construction Very reliable in operation Medium: - Compressed Air Port size: ...
Pressure: 0.7 bar - 10 bar
Temperature: -20 °C - 80 °C
... function Can be combined to operate from three or more sources Valves can be ganged together Medium: - Compressed Air Port size: - G1/4 Mounting: - Through holes in valve body
Pressure: 0.3 bar - 16 bar
Temperature: -20 °C - 80 °C
Allows free flow in one direction only Simple reliable design High operating pressure and temperature Spares kit available Medium: - Compressed Air Port size: - G1/2
DN: 0.5 in
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 70 °C
... non-return valves for reliable protection against dangerous reverse gas flow. Flow-optimised valve system causes very low pressure drop at minimal noise emission. Every non-return valve ...
WITT-Gasetechnik
DN: 0.5, 1, 0.75 in
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 70 °C
... non-return valves for reliable protection against dangerous reverse gas flow. Flow-optimised valve system causes very low pressure drop at minimal noise emission. Every non-return valve ...
WITT-Gasetechnik
DN: 1.5 in
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 70 °C
... non-return valves for reliable protection against dangerous reverse gas flow. Flow-optimised valve system causes very low pressure drop at minimal noise emission. Every non-return valve ...
WITT-Gasetechnik
DN: 0.125 in - 3 in
Pressure: 1,000 bar
... The check valves are available for inert/flammable gases and for oxygen and come complete with the seals suitable for the relevant medium. All check valves comply with ...
WEH GmbH Verbindungstechnik
DN: 10 mm - 20 mm
Pressure: 0 bar - 250 bar
Temperature: -20 °C - 200 °C
WEH® Check Valve TVR2-S1 stainless steel - Product family Thanks to their extreme leak tightness, the WEH® TVR2 check valves from stainless steel are perfectly suited ...
WEH GmbH Verbindungstechnik
DN: 3, 4 mm
Pressure: 0 bar - 100 bar
Temperature: -40 °C - 200 °C
... TVR300 Miniature check valves made of stainless steel are ideal for applications with liquid and gaseous media up to max. 100 bar. The possible applications are just as varied as the design and the ...
WEH GmbH Verbindungstechnik
DN: 0.17, 0.125, 0.063 in
Pressure: 0 psi - 75 psi
Temperature: 5 °C - 48 °C
Check valves will prevent flow in one direction and facilitate flow in the opposite direction. Check valves are sometimes called non-return valves. Floating ...
DN: 0.062, 0.125 in
Pressure: 0 psi - 75 psi
Check valves will prevent flow in one direction and facilitate flow in the opposite direction. Check valves are sometimes called non-return valves. Normally ...
DN: 0.88 mm - 1.01 mm
Pressure: 0 psi - 250 psi
... cracking pressures around 0.5 psig. Check valve elements are typically actuated by reverse pressure and are best suited for applications with over 5 psig of back pressure. If the valve ...
Beswick Engineering Co, Inc.
DN: 0.88 mm - 3.2 mm
Pressure: 0 psi - 250 psi
... cracking pressures around 0.5 psig. Check valve elements are typically actuated by reverse pressure and are best suited for applications with over 5 psig of back pressure. If the valve ...
Beswick Engineering Co, Inc.
DN: 2, 0.125 mm
Pressure: 0 psi - 100 psi
... cracking pressures around 0.5 psig. Check valve elements are typically actuated by reverse pressure and are best suited for applications with over 5 psig of back pressure. If the valve ...
Beswick Engineering Co, Inc.
DN: 2.7 mm - 14.3 mm
Pressure: 1,550 bar
Temperature: -20 °C - 200 °C
The O-Ring check valves are suitable for applications that require non-leakage sealing. It can be operated within the pressure of 1, 500 bar and is used for stopping the directional liquid and gas flow. ...
Maximator GmbH
Pressure: 4,500 bar
Temperature: -20 °C - 200 °C
... O-Ring check valves are capable of shutting off directional flows of gases and fluids. They are incorporated with a leakage-resistant sealing feature. The O-Ring and Ball Check Valves ...
Maximator GmbH
Pressure: 4,500 bar
Temperature: -50 °C - 350 °C
These Maximator Ball check valves can shut off directional flows of fluids and gases with maximum working pressure of 4,500 bar and in - 50°C to +350°C operating thermal range. These valves ...
Maximator GmbH
DN: 8 mm - 100 mm
Pressure: 63 bar
Temperature: 0 °C - 180 °C
SPRING LOADED 3 PIECES CHECK VALVE - FEMALE / FEMALE BSP OR NPT - STAINLESS STEEL 316
DN: 25 mm - 100 mm
Pressure: 10 bar
Temperature: -10 °C - 100 °C
CHECK VALVE PLAIN END / MALE END - NBR GASKETS - STAINLESS STEEL 316L JOINTS NBR
DN: 15 mm - 108 mm
Pressure: -0.9 bar - 16 bar
Temperature: -20 °C - 120 °C
NON-RETURN VALVE NP16 TO PRESS - M TYPE PROFIL M Inox 316L - EPDM
DN: 0.25 in - 2 in
Pressure: 0 bar - 15.9 bar
Temperature: -18 °C - 93 °C
... high-quality Check Valves are specially manufactured in the U.S.A. by ANVER, for ANVER lifting systems. Versatile, one-way Check Valves work with nearly all of ANVER’s ...
DN: 0.125, 0.25 in
Pressure: 5, 0.6 bar
Flow rate: 0 l/min - 340 l/min
Closes the vacuum line when ejectors are inactivate, thus maintaining the vacuum pressure within the system.
DN: 6, 8, 12 mm
Pressure: 350, 500 bar
Temperature: -40 °C - 120 °C
C2.940 Flow control valves C2.940 Flow control valves max. operating pressure 500 bar ports: G 1/4
DN: 0.25 in - 0.5 in
Pressure: 500 bar
Flow rate: 15, 55 l/min
C2.9511 Pilot-operated check valves C2.9511 Pilot-operated check valves without/with pre-release pipe-thread type max. operating pressure 500 bar connections: ...
DN: 0.375, 0.125, 0.5, 0.25 in
Pressure: 0.3 bar - 25 bar
Temperature: -10 °C - 120 °C
FEMALE-FEMALE NON RETURN VALVE The 66.000 serie is made of stainless steel AISI 316L function fittings: flow controls for cylineders, in-line and banjo fittings, unidirectional valve, ...
DN: 15 mm - 125 mm
Ensures airflow is uni-directional. Lightweight swinging disc design
DN: 10 mm - 80 mm
Pressure: 6, 16, 10 bar
Temperature: 0 °C - 80 °C
... design Seal materials - EPDM, FPM Connections - flange, PE fusion socket, PE fusion spigot, solvent socket, solvent spigot, threaded socket Approvals - Declaration of Conformity acc. to Annex VII of the Directive ...
Praher Plastics Austria GmbH
DN: 10 mm - 80 mm
Pressure: 8, 6, 10 bar
Temperature: 0 °C - 80 °C
... series concept Floating cone design Seal materials - EPDM, FPM Connections - flange, fusion socket, fusion spigot, threaded socket Approvals - Declaration of Conformity acc. to Annex VII of the Directive 97/23/EG, ...
Praher Plastics Austria GmbH
DN: 10 mm - 80 mm
Pressure: 10, 16, 6 bar
Temperature: 0 °C - 60 °C
... turbulence Seal materials - EPDM, FPM Connections - flange, PE fusion socket, PE fusion spigot, solvent socket, solvent spigot, threaded socket Approvals - Declaration of Conformity acc. to Annex VII of the Directive ...
Praher Plastics Austria GmbH
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: 0 °C - 100 °C
The Easyfit check valve line developed with Giugiaro Design offers two different versions: SXE with ball shutter and SSE with spring loaded shutter. Easyfit check valves ...
FIP - Formatura Iniezione Polimeri
DN: 65 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 100 °C
The Easyfit check valve line developed with Giugiaro Design offers two different versions: SXE with ball shutter and SSE with spring loaded shutter. Easyfit check valves ...
FIP - Formatura Iniezione Polimeri
DN: 10 mm - 100 mm
Pressure: 6, 16, 10, 4 bar
Temperature: 0 °C - 100 °C
The VR is an angle seat check valve with weighted PVC piston that allows the passage of fluid in one direction only. • Connection system for solvent weld, threaded and flanged joints • ...
FIP - Formatura Iniezione Polimeri
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining