- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Screw-in fitting
Screw-in fittings
Goodridge 236 fittings are reusable fittings designed for use with our 200 series hose. The triple seal/double O-ring nitrile, cutter design ensures a secure leak free connection, easily assembled using basic hand tools. Our 1136 ...
Goodridge 811 series patented reusable fittings are designed for the G-Line XF-910 and XF-811 hoses. The 811 reusable fittings range can be assembled using basic hand tools. Compatible hose: G-Line XF 910 & 811
We’ve been designing high-performance analytical instruments for decades, so we know how important fittings are. From surface finish to leak integrity to dead volumes, all factors are taken into account and must meet our very high standards. ...
Diameter: 0.13 in - 0.5 in
Labfacility offers stainless steel compression fittings with parallel or tapered thread. They are suitable for imperial and metric probe diameters starting from 1mm. The tapered fittings are constructed with British Standard Pipe Thread ...
Diameter: 0.13, 0.25 in
These compression fittings are for use with numerous applications. There are brass compression fittings with a parallel thread and brass compression fittings with a tapered thread. Numerous other fittings are also offered by Labfacility ...
Operating pressure: 350, 700 bar
Connect 2 Quick-test XT 10,000 psi hoses together quickly and easily • Quick-test XT connection makes connecting two high pressure hoses together quick and easy • Note that these are not compatible with QT or QS hoses. Please ...
Ralston
Operating pressure: 350 bar
Connect a hose on one side of a panel, wall or enclosure with female NPT on the other side • Bulkhead seals so no liquid or moisture can get into a control panel or enclosure • Use to connect fittings on the inside of an enclosure ...
Ralston
Operating pressure: 350 bar
Connect three hoses or a combination of 3 hoses, adapters and hand pumps or manifolds • Durable forged construction • Tee has full flow through each of the ports • Made in USA
Ralston
Diameter: 1.25 in
The plug and socket fitting portion of couplings 20, 30 and 40 are interchangeable, as are those of the 400, 600 and 800 couplings. This means that a coupling 20 may be connected to a 30 or 40, the only difference being the flow capacity ...
Each set consists of two hose sockets with nuts for connection to the gas regulator and torch. Included is also a connection stub for using the set as a hose joint. Nuts and connection stub for oxygen are righthand threaded. The hose ...
QUICK COUPLING AR REG. TO HOSE 6MM Safe quick coupling for Argon / Co2 gas connection. The coupling has a black color code to prevent it from been mixed up with other gases. Prevents the hoses to become disconnected. Comes ...
Diameter: 0.5 in - 1 in
Operating pressure: 150 psi
SIZE: 1/2"~1" JOINT END TYPE 1: SOCKET (ANSI /DIN / JIS/ CNS) JOINT END TYPE 2: THREADED (PT) WORKING PRESSURE: 150PSI Key words: External teeth live joint
Xiamen Keheng Plastic Co., Ltd.
Diameter: 0.5 in
Operating pressure: 150 psi
SIZE: 1/2" JOINT END TYPE 1: SOCKET (ANSI /DIN / JIS/ CNS) JOINT END TYPE 2: THREADED (G/PT/NPT) WORKING PRESSURE: 150PSI
Xiamen Keheng Plastic Co., Ltd.
Diameter: 0.5 in - 1 in
Operating pressure: 150 psi
SIZE: 1/2"~1" CONFORM TO: ASTM D2467 (SCH80) ASTM F439 STANDARD: ANSI WORKING PRESSURE: 150PSI
Xiamen Keheng Plastic Co., Ltd.
Diameter: 6 mm - 51 mm
DIN2353 (Metric), b55200 (BSP), SAEJ514 (JIC), SAE J1453 (ORFS) JIS B 8363; It is produced in accordance with B SAE J518 (Flanged) norms. MANULI Hose Unions as the leading hose union manufacturer of Europe improves its self constantly ...
Diameter: 6 mm - 108 mm
Operating pressure: 25, 16, 10, 45 bar
The SANHA series 4000 and 5000 "SA" consist of tried and trusted solder and transition fittings for copper pipes according to EN 1057 and EN 13348 for hard and soft soldering. All products are certified according to many national ...
SANHA GmbH & Co. KG
Diameter: 15 mm - 54 mm
Description NiroSan Bend 90°, female end and male thread
SANHA GmbH & Co. KG
Diameter: 15 mm - 54 mm
9280G - NiroSan Male adaptor NiroSan Adaptor, with male plain end and male thread
SANHA GmbH & Co. KG
Diameter: 63 mm - 315 mm
This special version of our pressure class-compatible tees enables a measuring device to be connected directly via an integrated pipe thread. Its compact dimensions mean the threaded connection is situated close to the pipeline. This ...
PROCESS MASTERY Full mastery and integration of near-netshape cold-forging technology, combined with precision machining of stainless steel and 100% high-speed quality control, enables LISI AUTOMOTIVE to offer the quality, reliability ...
PROCESS MASTER ampouleOur expertise in steel deformation processes, from simulation to functional testing, combined with our skills in “Netshape” cold forging, means we can offer the quality, reliability and efficacy required of these ...
Diameter: 15 mm
Tigris K1 is a multilayer pipe system designed for potable water and heating applications. It is ideally suited for installation on commercial projects such as educational establishments, apartment blocks and hotels. The system comprises ...
Wavin
Diameter: 5 mm - 100 mm
With the standard-fitting-system according to DIN ISO 12151-2 and DIN ISO 12151-3 we offer benefits to assemble swage fitting with the applicable ferrule with or without skiving, according to the standards for hose lines. We produce and ...
So far welding nipples often have been employed in metallurgical industry and in construction of cranes and elevators, off-shore facilities and heavy-duty farming machines, but now RR-FORM® system replaces welding with a faster and more ...
TN 400 fittings have the following points of strength: • Minor change in cross section • Negligible pressure loss • Taper to DIN 3865 • Appropriate for extreme load conditions • Low tightening torque • High tensile safety • ...
Rastelli Raccordi manufactures 37° fittings for flared tubes in carbon steel and stainless steel in compliance with SAE J 514/ISO 8434-2. The particular features of the SAE J 514 – 37° fittings for ducts consisting of weldness, rolled-steel ...
Diameter: 15 mm
Operating pressure: 2 bar
Diameter: 0.5 in - 100 in
Brass fitting fire thread from 100 to 3 1/2″ and to 4″
Diameter: 0.25 in - 4 in
Operating pressure: 40 bar
Host connection for thread-stud, suitable for flexible hoses, both for high and low pressure. As required (in accordance with the stud and material), The personalised design of the piece will be studied, in which case it will be considered ...
Diameter: 58.7 mm
Operating pressure: 20 bar
Irrigation connector F inlet and F outlet, DIN 2999 threaded Cod. G64.01 Irrigation elbow for hydrant connection
Part number - MAD976ADAPTER - EAN - 8719593255811 - Unit - Each - Long description - Coupling MAD / SAD - Battery type - CR 2430 - Voltage - 3 V - Protection class IP - 65
Diameter: 16 mm - 75 mm
Clamping connector / screw connector without support tube for optimum grip and durability. The product group A3 is just right for anyone who wants to work fast, cost-effective and space-saving. The separate sealing and clamping function ...
BEULCO GmbH & Co. KG
Diameter: 4 mm - 10 mm
Operating pressure: 0 bar - 60 bar
This Fittings range dedicated to lubrication and vacuum systems, combines very high performance and manual connection. This technology secures the connection and sealing performance, even at high pressure. Fetaures/Benefrts: -Robust •Designed ...
Parker Fluid System Connectors Division Europe
To meet connection requirements, Bimba manufactures a variety of straight connector fittings. Our standard 10-32 thread features a captured o-ring design for a superior seal and the reliability of a metal-to-metal mechanical fit. Eight ...
Bimba
Diameter: 2 mm - 16 mm
Operating pressure: -100,000 Pa - 1,000,000 Pa
KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The use of a special profile seal allows the KQ2 to be used for a wide range of pressures from a low vacuum up to a pressure ...
SMC Corporation of America
Diameter: 1 in - 8 in
Male threaded nipple NPT or BSP Material: Carbon Steel, Stainless Steel, Aluminium, Brass, Polypropylene Ferrule: Carbon Steel, Stainless Steel
Trelleborg Couplings & Accessories
Diameter: 0.375, 0.5, 0.25 in
Operating pressure: 634 bar
Parker's Orifice Fittings come in both 37° flare and O-ring face seal (ORFS) configurations. These compact and cost effective orifice fittings allow OEMs to pre-set, at the factory, a specified orifice in specific hydraulic tube or hose ...
Parker Stratoflex
Diameter: 0.25 in - 0.875 in
Operating pressure: 870 psi
ZoomLock Push - Removable new tool-free refrigerant fittings provide a faster, cleaner, safer connection using a braze-free, flame-free, refrigerant piping solution for HVAC/R systems. Parker ZoomLock Push is a tool-free design that ...
Dayu Water Saving Group Co., Ltd. was established in 1999. It is a national high-tech enterprise based on the Chinese Academy of Water Sciences, the Science and Technology Promotion Center of the Ministry of Water Resources, the Chinese ...
DaYu Water-saving Group Co.,Ltd.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining