- Power Transmission - Mechanical components >
- Motor and Motor Control >
- Three-phase motor
Three-phase motors
Power: 6 W - 180 W
Torque: 0.055 Nm - 1.27 Nm
Rotational speed: 1,600, 6,000, 4,000, 2,945 rpm
DYD 57 BL(S) 001 ① ② ③ ④ ①DYD MOTOR ②FRAME ③BRUSHLESS BRUSHLESS BRUSHLESS BRUSHLESS MOTOR WITH ROUND FRONT END BELL ④NO. General Specifications Item: Specification Winding: type Delta Hall ...
Power: 785, 1,570 W
Torque: 5, 2.5 Nm
Rotational speed: 3,000 rpm
GENERAL SPECIFICATION Winding type:YWE Hall effect angle:120 Deg. Electrical angle Radial play:0.02mm @460g End play:0.08mm @450g Max. radial force:220N @ 20mm from the flange Max. axial force:60N Insulation class:B Dielectric ...
3X MOTION TECHNOLOGIES CO.,LTD.
Power: 16, 5.2, 6 W
Torque: 0.007, 0.05, 0.016 Nm
Rotational speed: 8,000, 3,100 rpm
GENERAL SPECIFICATION Winding type:YWE Hall effect angle:120 Deg. Electrical angle Radial play:0.02mm /450g End play:0.08mm /450g Max. radial force:2N @ 10mm from the flange Max. axial force:10N Insulation class:B Dielectric strength:500VDC ...
3X MOTION TECHNOLOGIES CO.,LTD.
Power: 18.5, 25 W
Torque: 0.0118 Nm
Rotational speed: 20,000, 15,000 rpm
GENERAL SPECIFICATION Winding type:YWE Hall effect angle:120 Deg. Electrical angle Radial play:0.02mm /450g End play:0.08mm /450g Max. radial force:2N @ 10mm from the flange Max. axial force:10N Insulation class:B Dielectric strength:500VDC ...
3X MOTION TECHNOLOGIES CO.,LTD.
Power: 18.5 kW
Intensity: 33 A
Rotational speed: 3,550 rpm
All data see photo on type plate. Year of manufacture 2016. As good as new, was stored after 1 test run. The engine can be connected and tested on site, after coordination also via online video chat. Any warranty is excluded.
Power: 0.75 kW - 200 kW
Rotational speed: 1,000, 3,000, 1,500 rpm
Operating temperature: -15 °C - 40 °C
... fans, and pumps. The motors are installed in the same way as standard three-phase asynchronous motors, and can be perfectly replaced with traditional low-energy-efficiency ...
Shandong Sunvim Motor Co., Ltd.
Power: 0.75 kW - 1,000 kW
Intensity: 0.9 A - 672 A
Torque: 2.5 Nm - 2,581 Nm
SUNVIM IE4 electric motors are manufactured according to international standard IEC60034-30-1:2014. All IE4 motors are manufactured with premium grade silicon steel, low harmonics winding, ...
Shandong Sunvim Motor Co., Ltd.
Power: 0.75 kW - 375 kW
Intensity: 1.6 A - 674 A
Torque: 2.5 Nm - 3,039 Nm
SUNVIM IE3 electric motors are manufactured according to international standard IEC60034-30-1:2014. All IE3 motors are provided with premium quality cold-rolled silicon steel, low harmonics ...
Shandong Sunvim Motor Co., Ltd.
Power: 550 W - 315,000 W
Intensity: 1,430 mA - 559,000 mA
Rotational speed: 3,000, 1,500, 1,000 rpm
YE2 series high-efficiency three-phase asynchronous motor is a totally-enclosed squirrel cage three-phase asynchronous motor manufactured ...
Zhebao Group Co., Ltd.
Power: 0.03 kW - 15 kW
Intensity: 0.5 A - 40 A
Torque: 0.4 Nm - 98 Nm
Simotop series aluminum housing three-phase asynchronous motors, with latest design in entirety, are made of selected quality materials and conform to the IEC standard. Simotop motors ...
Simotop group
Power: 160 kW - 8,000 kW
Elom YAKK increased safety high-voltage three-phase asynchronous motors can be used to drive all kinds machine such as compressors, water pumps, fans and other mechanical ...
Power: 0.12 kW - 45 kW
Rotational speed: 3,000, 1,000, 1,500 rpm
SERMES
Power: 0.75, 315, 250, 200 kW
Rotational speed: 1,000, 1,500, 750, 3,000 rpm
Diameter: 158 mm - 700 mm
SERMES
Power: 0.18, 0.12, 45, 30 kW
Rotational speed: 1,000, 1,500, 3,000 rpm
Diameter: 123 mm - 465 mm
SERMES
Power: 2.2 kW - 9.3 kW
Intensity: 4.1 A - 133.7 A
Torque: 7.37 Nm - 88 Nm
Franklin Electric 4" encapsulated submersible motors, built in ISO 9001 certified facilities for outstanding performance in 4" or larger water wells. The 3-phase motor ...
Franklin Electric
Power: 0.55 kW - 315 kW
Intensity: 54.5 A
Torque: 119 Nm
... application field of high temperature and air conditioning industry. The D1CS exhaust motor is specially designed according to the engineering requirements. The series motor has the characteristics ...
Dalian Dalmo Electric Motor Co. Ltd
Power: 1.5 kW - 200 kW
Intensity: 4.25 A - 490 A
Torque: 539 Nm
... reusable wound rotor three-phase asynchronous motor products, which meet the requirements of professional standard ZBK26008-89. YZ series are products of three phase ...
Dalian Dalmo Electric Motor Co. Ltd
Power: 0.75 kW - 315 kW
Intensity: 54.9 A
Torque: 2 Nm
The YBX3 series high efficiency flameproof three-phase asynchronous motor is a series of self sealing fans, fan fans, squirrel cage and high efficiency flameproof three ...
Dalian Dalmo Electric Motor Co. Ltd
Power: 9.2 kW
... gearbox and electric motor, our product range includes standard three-phase motors and single-phase motors as well ...
Rehfuss Drive Solutions GmbH
Power: 0.09 kW - 3 kW
Torque: 0.41 Nm - 13.6 Nm
Rotational speed: 700 rpm - 3,400 rpm
GEORGII KOBOLD – The motors in the KOD series are high-quality, three-phase, squirrel-cage induction motors with special mechanical characterisics. Through the use of ...
Power: 0.2 kW - 200 kW
Rotational speed: 1,000 rpm - 3,600 rpm
Shidae Electric Co.,Ltd.
Power: 0.4 kW - 7.5 kW
Rotational speed: 1,000 rpm - 1,800 rpm
Shidae Electric Co.,Ltd.
Power: 0.2 kW - 200 kW
Rotational speed: 1,000 rpm - 3,600 rpm
Shidae Electric Co.,Ltd.
Power: 20, 22.9, 24, 27.4 W
Torque: 0.182 Nm - 0.23 Nm
Rotational speed: 1,200, 1,000 rpm
The ASM 84 Series is composed of AC synchronous electric motors with ball bearing developed by ASTRO Motorengesellschaft. The shaft of these motors have a speed of 1,000 ...
ASTRO Motorengesellschaft
Power: 8.5, 7.5, 5.3 W
Torque: 0.029 Nm - 0.098 Nm
Rotational speed: 1,800, 1,500 rpm
The ASM 24 Series is a unit manufactured by Astro company. It is a motor unit with a speed of 1000 and 1500 rpm by 50 Hz. The ball bearing of the unit conforms through the protection class of IP 40-65. The maintenance ...
ASTRO Motorengesellschaft
Power: 5.2, 6.2, 7 W
Torque: 0.042 Nm - 0.059 Nm
Rotational speed: 1,200, 1,000 rpm
The ASM 24 series, and the ASM 26 series are synchronous motors with ball bearings. The series have a shaft with speeds ranging from 1,000 rpm up to 1,500 at 50 Hz. Its rated voltage ranges from 1 V to 12 V and from 3 V up to 500 V.
ASTRO Motorengesellschaft
Power: 0.33 ch - 15 ch
Torque: 8.86 ft.lb - 223.998 ft.lb
Rotational speed: 1,200, 1,800, 3,600 rpm
... Insulation System( Class H Stator) - One-Way Brass Condensation Drains on DE & ODE - Designed to Class B Temperature Rise - Drive End Bearing Locks - VPI Insulated Winding - EISA Compliant - 24 Month Warranty
Techtop
Power: 180 W - 30,000 W
Intensity: 0.56 A - 59 A
Torque: 2 Nm - 26 Nm
... Sizes 63 up to 200 • High torque DC brake • Standard rectifier: 230V, 50/60Hz (others on request) The brake units are a single disc type mounted on the non-drive end-shield of the motor and can be ...
Torque: 3.2 Nm - 40.3 Nm
Rotational speed: 3,000 rpm
Diameter: 90, 110 mm
POWERPAC® hybrid stepper motors deliver more power in a smaller package. These rugged NEMA 34 and 42 (90 and 110 mm) motors combine optimal magnetics in a housingless frame with a large diameter rotor ...
Torque: 0.014 Nm - 3 Nm
Rotational speed: 3,000 rpm
Diameter: 60 mm
Kollmorgen T2 Series stepper motors provide high torque in a NEMA 23 frame size (60 mm). With holding torques to 421 oz-in (3.0 N-m), these steppers deliver the most torque of any Size 23 motor. They ...
Power: 1.1 kW - 22 kW
Reducing energy consumption and CO2 emissions AC motors have a significant impact on the total energy operation cost for industrial, institutional and commercial buildings. With this in mind Lafert ...
Lafert
Power: 25,000 kW
type of protection:Safe Area / Ex e, Ex n, EX p, Ex d, Ex de power range:up to 25 MW frame size:up to 1700 number of poles:all ingress protection:IP 23, IP 55 and higher temperature class:155 (F), 180 (H) method of cooling:Open Vent, ...
Power: 20 kW - 25,000 kW
type of protection: Safe Area, Ex d, Ex n, Ex p power range: 20kW to 25MW frame size: 225-1000 and above number of poles: 2, 4 ingress protection: up to 56 temperature class: F / H method of cooling: TEFC, CACA, CACW, Open vent, TEWJ
Power: 0.75 kW - 375 kW
Manufacturers of electric drives will have a key role to play in the energy-saving process: two thirds of total industrial power consumption comes from machines driven by electric motors. ...
Power: 0.25 kW - 2.2 kW
Intensity: 1.6 A - 11 A
Operating temperature: -10 °C - 40 °C
3-phase Motor with Integrated Controller. The switch to 3-phase motors is accomplished easily and impresses with a high reduction of TCO at maximum efficiency. • ...
... ABM Greiffenberger know-how. The starting current of the hoist motors is low, a dynamic ramp-up curve creates the prerequisites for high crane performance. ABM Greiffenberger hoist motors ensure precise, ...
Power: 0.06 kW - 22 kW
Operating temperature: -20 °C - 40 °C
... 2018, the manufacture of HL motors has been fully automatic. We have thus eliminated human errors that could result in qualitative shortcomings. We provide complete servicing, diagnostics and calibration of electric ...
CAG Electric Machinery s.r.o.
Power: 0.75 kW - 355 kW
Operating temperature: -20 °C - 40 °C
... 2018, the manufacture of HL motors has been fully automatic. We have thus eliminated human errors that could result in qualitative shortcomings. We provide complete servicing, diagnostics and calibration of electric ...
CAG Electric Machinery s.r.o.
Power: 355 kW - 1,500 kW
Operating temperature: -20 °C - 40 °C
... load Each HGH motor manufactured has a test under full load included in the base price. Thanks to the test, we can be sure that the motor will work well in your application. Short delivery time The ...
CAG Electric Machinery s.r.o.
Power: 0.5 ch - 50 ch
Rotational speed: 1,000 rpm
Operating temperature: -40 °C - 80 °C
Magnetek's Black Max motor meets the needs of more common crane applications. Black Max motors have a foot mounted NEMA design, and a "C" face drive end and accessory "C" face. This ...
Power: 1 ch - 400 ch
Rotational speed: 1,500 rpm
... frequency drives Class F thermostats (Klixons) in all three phases Cast Iron frame and brackets for strength and corrosion resistance Voltage 230/460, 3 phase, 60 Hz (143T to 286T ...
Power: 0.37, 0.75 kW
Torque: 1.3, 1.6, 1.8 Nm
Motor NS 65 EC motor with integrated controller | Torque up to 1,8 Nm NS 65 motors are electronically commutated (EC) motors available with or without integrated ...
Power: 0.09 kW - 30 kW
Our IEC normalized motors comply with all the applicable international standards, including the EMC and LV Directives. The power supply could be three phase with IE1, IE2 and IE3 efficiency ...
Stm Spa
Power: 21 kW - 420 kW
Intensity: 42 A - 700 A
Torque: 65 Nm - 1,340 Nm
• IEC axle heights 100-225 • Cooling type IC06 with open circuit circulation • Compact design • Very long service life • Large field weakening range • Low maintenance (brush-free) • High degree of effectiveness Therefore ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining