|
|
Standard Features
Output: 0.12 up to 7.5kW
Multivoltage - (220-240/380-415//440-460V or 380-415/660-690//440-460V)
Self Ventilated (TEFC)
EFF2 Improved Efficiency
Aluminium frames (63 up to 132M)
Mounting: B3T
Degree of Protection: IP55
Terminal block
Squirrel cage rotor /Aluminium die cast
V'Ring on both endshields
Stainless steel nameplate AISI 316
Continuous duty - S1
Ambient temperature: 40°C , 1000 m.a.s.l.
Metric thread cable entries in terminal box
Suitable for Inverter Duty applications*
Paint color: RAL 5007
*For additional details about Inverter operation, please contact our technical support.
*Special Insulation for voltage above 575V
Optional Features
Single voltage (other voltages)
Degree of Protection: IP56, IP65 or IP66
Other mounting configurations
Ventilation Motor, TEAO
Forced Ventilation, TEBC
Thermal protection:M
Thermistors
Thermostats
RTD-PT 100
Space heaters
Class "H" insulation
Mounting information
The foot mounting system offers great flexibility and it is quite simple allowing change on the mounting configuration without requiring any machining or modification on the motor feet.
Motor terminal box can also be rotated at 90 degrees allowing motor leads to be connected on any motor side.
|
|
| the assisted power cooling system of the Delphi SV series is three-phase 400/50 440/60, IP55, with separate terminal box |
|
Pacesetter 30R AC Inverter Duty Motor
Quintsulation 5-stage insulation system designed to meet NEMA MG 1-1993, Section IV, Part 31.
230VAC, 60 Hz, 3-phase for operation with a wide range of inverter products.
Inverter-Grade magnet wire and Class "F" insulation system for increased protection against spikes and corona damage caused by the inverter.
UL recognized for construction, CSA certified, and in compliance with the Low Voltage Directive "CE".
Standard Features:
Totally enclosed, non-ventilated IP-20 rating.
Class "F" insulation system for long life.
Aluminum endshields for high thermal efficiency and light weight.
Permanently lubricated, noise tested ball bearings.
Locked bearing design minimizes shaft endplay.
Application Information: Face mounting is standard.
|
|
| We invite you to see motive catalogue to understand the peculiarities of this product. Few words are not enough to illustrate its advantages. |
|
Construction
Mechanical protection: IP55
Insulation: Class F
Temperature rise: 80 K
Frames: are in cast iron, (except frames 180 - 225 which are in steel)
Terminal boxes: are in cast iron
Endshields/flanges: are in cast iron
Fans:
- Up to frame size 315 are in polypropylene, (except frames 180 - 225 which are in steel)
- On frames 355 and above, are in polypropylene or aluminium alloy.
Fan cover: in cast iron or pressed steel, capable to withstand impact of 7 Joule.
Finish: Industrial paint system, standard color RAL 5010.
Motor series BFGC (IIC): kW RPM
0.37 up to 450 kW 3000 RPM
0.25 up to 500 kW 1500 RPM
0.18 up to 450 kW 1000 RPM
0.12 up to 400 kW 750 RPM
Motor series BFG (IIB): kW RPM
250 up to 710 kW 3000 RPM
250 up to 900 kW 1500 RPM
200 up to 710 kW 1000 RPM
160 up to 630 kW 750 RPM |
|
| The standard motors in the designs B3, B5, B14 can be used with frequency inverters, also available as motors with integrated inverters. |
|
We provide a wide range of IEC Norm-Motors in EFF1 and EFF2. All motors are available in several designs. The power range starts at 0.09KW and stops at 7.5 KW in a aluminium case.
Our motors are for applications like pumps, compressor, ventilation systems, machines, conveyor systems and many other applications.
The technical construction of all motors is based on IEC and VDE.
All motors were constructed for Frequency Converter operation. The retrofitting of a seperately driven fan and of a break is possible at any time.
All motors are in protection class IP 55, ISO-class F and contains three PTC-thermistor. The motors are available wit B3 feet, B5 flange or B14 flange. |
|
MS series three phase electric motor
Technical spec:
Totally enclosed fan cooled (TEFC) three phase, squirrel cage type induction motors.
Beautiful modeling, compact structure, low noise, high efficiency, large starting torque, easy operation, etc
Ambient temperature: -15C
Altitude: not exceed 1000m
Rated voltage: 380V or any voltage between 220V-760V
Rated frequency: 50Hz, 60Hz
Protection class: IP54, IP55
Insulation class: F
Cooling method: IC0141
Duty: S1 (continuous)
Connection: Star-connection for up to 3kW, delta-connection for 4kW and above.
Application:
Widely used in various machines and equipments, such as drilling machines, blowers, pumps, compressors, transporters, agricultural and food processing machines.
MSN: hmm789 at hotmail.com |
|
Slip ring motors S..R 132 to 315, duty S1, continuous operation S..H 132 to 315, duty S3, intermittent duty
Output range 2.2 kW to 315 kW
Speeds 3,000; 1,500; 1,000; 750; 600; 500; 375 rpm
Features Designed to DIN EN 60034 (IEC 72), mounting dimensions and assignment of output ratings to DIN 42679 (S..R) and DIN 42681 (S..H), robust, low-vibration grey-cast iron design, degree of protection IP 54 / IP 55, higher degrees available on request, class F insulation, class H available as an option, energy-efficient and environment-friendly, various modifications possible |
|
Series: B... 63 to 355
Output range: 0.12 kW to 500 kW, higher output ratings available on request
Speeds: 3,000; 1,500; 1,000; 750 rpm, pole-changeable versions available on request
Brake types: Lenze BFK458, KEB .08.210, Mayr 800.410.3, Stromag BZFM
Features: Energy-efficient and environment-friendly, designed to DIN EN 60034 (IEC 72), mounting dimensions and assignment of output ratings to DIN 42673, 42677 or progressive, robust low-vibration grey-cast iron design, degree of protection IP 55, higher degrees up to IP 65 on request, class F insulation with thermal reserve, class H available as an option, terminal box optionally top-mounted, RHS or LHS up to frame size 315, various modifications possible |
|
G2.. 132 bis 355
Output range 4.3 kVA bis 500 kVA
Speeds 1,500; 1,000; 750; 600; 500 rpm, lower speeds available on request
Features Designed to DIN EN 60034 (IEC 72), mounting dimensions and output assignment to DIN 42673, 42677 or progressive, robust, low-vibration grey-cast iron design, degree of protection IP 55, higher degrees up to IP 65 available on request, class F insulation, class H available as an option, terminal box optionally top-mounted, RHS, or LHS, various modifications possible |
|
WATT EUSAS motors are top quality three-phase AC industrial models from Watt Drive’s customer-oriented modular WATT MAS 2000 motor system.
EUSAS stands for EUROPA - USA - ASIEN and means that the wide voltage range and simple voltage selector in the terminal box enable the motor to be operated with virtually any supply voltage and frequency worldwide.
|
|
Standard three-phase motors with squirrel cage rotor
Design industrial motor with aluminium housing
Main applications water and vacuum pumps, fans, compressors, drive systems, transmissions
Special applications machine tools, garden equipment, vehicles, elevator doors, food machines, extruders
Performance range 0,06 - 37 kW
Size 56 - 200
Standard three-phase motors with squirrel cage rotor
Design industrial motor with cast iron housing
Main applications chemical industry, ship and marine engineering, use under difficult environmental and general conditions
Special applications agricultural and construction machinery, hydraulic systems, mixing machines, stone processing equipment, separators
Performance range 37 - 315 kW
Size 225 - 355 |
|
- Ambient temperature: -15°C
- Altitude: not exceed 1000m
- Rated voltage: 380V or any voltage between 220V-760V
- Rated frequency: 50Hz-60Hz
- Protection class: IP44-IP54-IP55
- Insulation class: B-F
- Cooling method : IC0141
- Duty: S1(continuous)
- Connection: Star-connection for up to 3kW, delta-connection for 4kW and above. |
|
Standard type of motors range from 1/8HP to 20HP to met differing requirements, suited to individual needs.
Economical and general purpose-driproof type (EFOUP).
Rugged under most severe operating conditions-totally enclosed fan, cooled type (TFO).
Compactly designed equipment-flange mounted, totally enclosed, fan-cooled type (VTFO).
Internationally interchange ability/ Original "Hitachi WR grease".
High efficiency fan/ Low noise/ Low vibration/ Safety-assured design.
|
|
FRAME SIZE:
56 to 160 - aluminium deign
180 to 315 - cast iron design
OUTPUT:
0.09 to 22 Kw
30 to 200 kW
POLARITY:
single - 2, 4, 6, 8 poles (series AM)
pole-changing - 4/2, 8/4, 4/6, 6/8 poles (series AM and AMV for fan drives)
RATED FREQUENCY:
50 - 60 Hz
MOUNTING:
IM B3, IM B5, IM B35, IM B14, IM B34
DEGREE OF PROTECTION:
IP55 or higher
MAIN FEATURES:
motors comply with IEC requirements
TEFC construction
temperature rise to class B
aluminium design up to frame size 160
cast iron design from 180 frame size
up to 1.1 kW 2 and 4 poles, standard rating comply with efficiency class EFF2 according to CEMEP Voluntary Agreement
efficiency class EFF1 as standard from 180 frame
progressive motors on request
63 bearings from 160 frame
regreasing facility as standard from 200 frame
OPTIONS:
cURus certification
CSA certification
from frame size 90 operate on static frequency converters
encoder
forced ventilation
mechanical and electrical design on specific demand |
|
Signature Series™ and Ultimate E® ODP three-phase AC motors provide both premium energy-efficiency and outstanding performance. They meet the energy efficiency requirements of the United States and Canada for general-purpose industrial motors while delivering new levels of starting torque, overload capability and reliability.
Signature Series Motors
Frames 48-256T
Features: Industry leading 1.25 service factor, frames 143T-256T
Two levels of premium efficiency, 1800 RPM
Nameplated for 208V/60Hz and 50Hz Operation
Continuous Duty
Inverter-Rated
Premium Class F Insulation System
UL Recognized Component Listing and CSA certified
Warranty (sine-wave power) - 48 & 56 frames: 12 months from date of first use or 18 months from date of manufacture, whichever period expires first. 143T-256T frames: 5 Years
Warranty (inverter-power) - 48 & 56 frames: 1 year.
143T-256T frames: 2 years (see LC100 catalog for details)
Ultimate E Motors
Frames 284T-449T
Features: Industry-leading 1.25 service factor through 200 HP
Superior speed-torque curves - most models nameplated Design B & C
Two levels of premium efficiency
Nameplated for 208V/60Hz and 50Hz Operation
Continuous Duty
Inverter-Rated
Construction Materials - steel frame and NEW! cast iron end brackets
Premium Class F Plus Insulation System
Solvent-based, Class H phenolic varnish provides superior bond strength
E-coat prime paint
Y-delta start capability frames 284T - 449T
UL Recognized Component Listing and CSA certified
Warranty (sine-wave power) - 5 years
Warranty (inverter-power) - 2 years (see LC100 catalog for details)
Made in U.S.A. |
|
Voltage: 230/400 V
Moreover we supply Three Phase Motors for all voltages up to 575 V.
Frequency: 50 or 60 Hz
Power: 60 - 1100 Watt
Number of Poles 2-pole, 4-pole
Other numbers and pole-changing version on request
Type of protection: IP 54 |
|
Series A2../ARC 112 to 355, for frequency converter operation, ARB 22 to 65, heavy version for mains operation
Output range 0.4 kW to 500 kW (ARB series from 0.4 to 5.5) Acceleration torques 40 Nm to 3,000 Nm
Speeds 3,000; 1,500; 1,000; 750; 600; 500 rpm, lower speeds available on request |
|
dSKgw series motors are used for driving mining organ of combined-cutter-loaders and conveyors in extremely tough conditions in underground headings with class “a”, “b”, “c” of methane explosion danger and class “A” and “B” of coal dust explosion danger. Motors of this series are three-phase squirrel cage induction motors in explosion-proof execution with EExdI characteristics confirmed with ATEX certificate issued by KD “BARBARA”.
Basic characteristics:
Execution EExd I acc. To PN-EN 50014, PN-EN 50018 which comply with ATEX 100A Directive.
Protection degree IP55 insulation class H.
Water cooling, ICW37 cooling system according to PN-EN 60035-6.
Continuous duty S1 and intermittent duty S4-60% (40c/h; Jext/Jm=1).
Declutching device with safety shaft.
Durable welded frame with double coat.
Low noise and vibrations.
Atmospheric pressure 800-1070hPa, ambient temperature 0-40°C.
Relative humidity at 35°C 97-100%.
Altitude <1000m, dustiness <1000mg/m3.
Operation in areas with class “a”, “b” and “c” of methane explosion danger and class “A” and “B” of coal dust explosion danger.
Allowable inclination of shaft from horizontal position 30°.
Parameters of cooling water (on inlet): max. temp. 30, max. stat. pressure 3MPa, flow 15dm3/min.
|
|
Servo-ventilated three-phase motors - Series W...- Servo-ventilated motors with single-phase motor Papst
- Servo-ventilated motors with three-phase motor
|
|
Three-phase motors - series X... - One speed motors
- Two speed motors, one winding (Dahlander) - for general purpose
- Two speed motors, two windings - for general purpose
- Two speed motors, one winding (Dahlander) - for ventilation
- Two speed motors, two windings - for ventilation
- Three speed motors, two windings - for ventilation
Servo-ventilated three-phase motors - Series W...- Servo-ventilated motors with single-phase motor Papst
- Servo-ventilated motors with three-phase motor
|
|
Three-phase AC motors
Standard three-phase AC motors; 0.25 to 22.0 kW 3 x 230/400 V; enclosure IP 54; mountings B3, B5 or B14; these motors are optimised for operation with a frequency inverter
Detailed information
Three-phase AC motors with motec
Standard three-phase AC motors; 0.25 to 7.5 kW 3 x 230/400 V; enclosure IP 54; mountings B3, B5 or B14; the 8200 motec inverter is integrated
Detailed information
Three-phase AC motors with starttec
Standard three-phase AC motors; 0.25 to 4.0 kW 3 x 230/400 V; enclosure IP 54; mountings B3, B5 or B14; the starttec motor starter is integrated
|
|
|
|