|
|
|
High accuracy toolholder featuring one action double clamping , with strong and positive clamping , with strong and positive clamping power requiring few parts
|
|
|
|
|
|
Choose from a variety of toolholders, boring bars, cartridges, or modular systems to maximize lathe productivity.
Cartridges
Available in large range of lead angle geometries and various insert styles. Completely interchangeable in any bar, head, or tooling block manufactured to ANSI or ISO standards
Interchangeable Head Boring System
Composite, De-Vibrator, and Tunable bars perfect for machining at extended lengths without chatter, increased metal removal rates, and high precision.
KM Micro
Versatile, economical, and quick, this system is Kennametal proprietary, and it can be used to hold the conventional turning, threading, and grooving inserts. Available in shank sizes 16mm and below.
Kendex (for ID and OD machining)
Top clamp and MTS: These two systems provide the optimum pressure and additional chip wear protection for Kendex inserts.
Kenloc Combination Toolholder (for ID and OD machining)
The widely used combination holder with top clamp and pin has the largest range of sizes for all your Kenloc insert applications.
Screw On (for ID and OD machining)
Ideal for profiling and small part applications, these holders are popular for their precision, wide range of lead angles, and performance
Top Notch Turning (for ID and OD machining)
Robustness is the key: This system has been specifically engineered for cast iron machining applications.
|
|
MTC™ Toolholder System
Double V design:
- offers maximum insert stability
- optimizes insert positioning
- provides "operator friendly" insert indexing
- Integral shank toolholders are available in stub or extended DOC, right or left hand.
- Integral shank toolholders are available in stub or extended DOC
|
|
Benz Hydraulic Tool Holder. Hydraulic tool holders provide a far more accurate and positive clamping solution for your tools as compared to the standard nut and collet type toolholders.They are often used with diamond tools when high quality finishes are necessary.These units are available with most spindle connections. Clamping capacity can be supplied in both metric and imperial sizes. Stock items (current inventory) are available as a single piece purchase. Special sizes require a 5 piece minimum order.
SPINDLE CONNECTION HSK 63F, ISO 30, BT 30, BT 40, etc.
CLAMPING CAPACITY All metric and imperial sizes
GAUGE LENGTH 75 mm
|
|
MAPAL's modern clamping systems, in conjunction with MAPAL's tried and tested reaming and fine boring tools, guarantee maximum productivity and economy. Whether HSK, ISO or HFS®, these high-precision connections and interfaces provide the concentricity and changeover accuracy essential to modern production.
|
|
Toolholders
Improved Performance
. Greater Stability - allows higher feed rates without vibration
. Greater Accuracy - reliable clamping helps maintain close tolerances
. More Secure - new clamp feature grips the insert in two directions downward and back to pocket wall
. Easy Change Out - only one key required to change inserts
. Tolerances - less scrap with reduced measuring cuts required
. Flexibility - reduce inventory stock with total interchangeability of clamps and shims
|
|
Tooling system GM 300
Tool holders, clamping systems and accessories to ISO 12164, DIN 69893 and DIN 69871 for transfer lines, machining and turning centres
Flexible tooling system GE 100
a tooling system for the combined machining
operations facing, chamfering, boring, centering etc.
ISO indexable inserts, short clamping
holders and KV 400 cartridges
|
|
ER Spring Collet Chuck System
- Easy to mounting with self-tighten Keyless Chuck for use on CNC machining centers in Drilling, Boring and Milling operations.
- According to DIN, Morse, ANSI standard to produce.
- High precision ground internal and external for accurate concentricity.
Precision Tool Holder System
- Easy to mounting with self-tighten Keyless Chuck for use on CNC machining centers in Drilling, Boring and Milling operations.
- According to DIN, Morse, ANSI standard to produce.
- High precision ground internal and external for accurate concentricity.
|
|
Indexing Turrets
Clamping on HIRTH face tooth coupling, high stiffness and accuracy.
Integral drive train.
Accepts range of servo motors.
Coolant delivery system.
12 month warranty.
|
|
|
|
|
|
RINGSPANN delivers :
Clamping elements and standard clamping parts for customer designed clamping tools
Clamping tools to suit customer requirements
Clamping with Disc Pack:
Clamping diameter up to 200 mm
Clamping on workpieces onto two different diameters
Protective clamping of workpieces prone to distortion
Quick and easy changeover for other workpieces
Clamping with Elements:
Clamping diameter up to 600 mm
Clamping in/on very short locations
Protective clamping of workpieces prone to distortion
Compact design
Clamping area adaptable to design requirements
Clamping with Taper Collets:
Clamping diameter up to 200 mm
Mandrels for short lengths and blind bores from 10mm diameter
Mandrels with maximum torque transmission for heavy machining
Clamping with Hydraulic Systems:
Clamping diameter up to 400 mm
Sealed against swarf
Clamping range 0,3% of the clamping diameter, no axial pull back
Possibility of clamping several components at one time
Alternative mechanically actuated systems available if required.
|
|
F-Tool swivel block 56 and WEDM vise V 0-75 mm
Made of corrosion-resistant, hardened stainless steel. Vise delivered with clamping jaws for the stress area of 0-75 mm.
Hole pattern appropriate to electrode holders with hole distance for M6 distance 40 mm.
|
|
Benefits offered by Split Boring Bar Holders include:
• Compatability with anti-vibration bars
• Increased cutting performance
• Deeper boring capability (up to 10 times
diameter)
• Increased performance over standard
boring bars
Reduction Bushes
To complement our range of Split Boring Bar Holders, we also offer Split Reduction Bushes for use with smaller diameter boring bars.
Our extensive range of Cap and Hinged-Type Boring Bar Holders suit machines for many leading manufacturers, including Mazak, Doosan, Okuma, Mori Seiki and Hwacheon.
* Cap-Type
* Hinged-Type
In addition to our standard range, Craftsman Tools’ in-house designers can create special Split Boring Bar Holders to suit specific requirements.
|
|
SPLIT BORING BAR HOLDERS
For use with anti-vibration bars
- Deeper boring capability (up to 10 times diameter).
- Increased cutting performance.
* Available with through-tool coolant.
The Split Boring Bar Holder will also increase the performance of standard Boring Bars.
|
|
| ... products without technical information |
| |
|
|
