|
|
AUTORADIAL
AUTORADIAL offers a range of facing heads with automatic feed and a rapid return of the tool slide without having to stop or reverse the spindle of the machine tool.
- automatic working feed of the tool slide
- rapid return of the tool slide
- reset of the automatic feed.
AUTORADIAL heads are applicable on machining centres and on NC machines, without the need of any electronic interface. They automatically execute a working cycle of advance and return.
They automatically execute a working cycle of facing and record spiral cutting on valve body grooving both on ID or OD. The heads are produced in three models: AR100, AR125 and AR160 and are supplied with one feed rate gear. A total of six different and interchangeable feed rate gears are available upon request.
|
|
BENZ GmbH Werkzeugsysteme is one of the leading companies in manufacturing of Live tools for a vide variety of lathes. Decades of experience and high quality standards form the basis for a sophisticated range of products. The skilled and motivated BENZ team accompanies you from competent evaluation to fast and reliable order processing up to the final product.
The name premium stand for the new cor product range for live tools from BENZ. The
most comon machine- and revolver types are taken into consideration.
plus high quality through X-line gear technology
higher torque, higher revolutions (rpm), smoother and more quiet running
less heat development, less susceptance for failure and smaller design
plus high readiness to deliver
in stock or deliverable on short notice
plus attractive pricing
serial production
plus innovation
geometry and weight optimized, new design
|
|
|
|
|
|
Seco Tools EPB boring heads cover the entire 0,3-2155 mm (inches: .012-84.843) diameter range. These tools achieve positioning accuracy, hole diameter precision and flexibility.
AXIABORE FINE BORING HEADS
Fine boring heads with axially fitted tools
Ø 0,3 - 108 mm (inches: 0.12 to 4.25)
AXIABORE / AXIABORE PLUS
The AxiaBore and AxiaBore Plus offer boring capacities from 2 to 108 mm with two boring heads.
AXIALIBRABORE / AXIALIBRABORE PLUS
High speed machining, up to 1500 m/min, can be performed using the Axialibrabore™ and Axialibrabore™ Plus.
NANOBORE
For extremely small diameters, e.g. watch making, micromechanics or aerospace industries, Nanobore A 760 01 offers unique possibilities
ROUGH BORING HEADS
The A750 rough boring heads are developed for highest possible boring performance: diameter capacity of 18 to 205 mm (0.7 to 8.07 inches).
BRIDGE BARS AND JUMBO BRIDGE BARS
Seco Tools has a complete range of Bridge Bars and Jumbo Bridge bars for large diameter boring, overturning and grooving.
RADIAL TYPE FINE BORING HEADS
The radial type of fine boring heads consist of two ranges: 9 pre-balanced and 5 balanced.
CUSTOM MADE BORING SOLUTIONS
Seco Tools has solid knowledge and experience of custom made boring solutions.
|
|
Mechanical heads
First of all the milling heads must be reminded, starting from the universal continuous positioning head (TUPC), real jewel of FPT family.
This very innovative concept has characterised FPT products since 1994, making the difference in terms of exploitatation of the machines, of machining quality and low cost management, and saving tools, clamping systems and time.
|
|
SENSITIV T-TA
SENSITIV T-TA offers a range of facing and boring heads with manual and automatic feed.
easy to handle, flexibility of use and high precision in machining are the strongest points of the SENSITIV T-TA, which operate without having to stop the spindle of the machine tool. These heads can be used on milling machines, boring machines, jig boring machines track and radial drills.
SENSITIV T-TA performs external facing, back-facing, cylindrical and taper boring and internal and external grooving.
Four models are available: T100 with manual feed, TA120, TA170 and TA220, with two automatic feeds and a rapid return.
|
|
Because of their different design, large boring heads do not include Accu-set, Safety-set, or Speed-Set capability.
Two differents types:
- Direct Mount Large Boring Heads
- Adapter Mount Large Boring Heads
|
|
Split Boring Bar Holders
Benefits offered by Split Boring Bar Holders include:
• Compatibility with anti-vibration bars.
• Increased cutting performance.
• Deeper boring capability (up to 10 times diameter).
• Increased performance over standard boring bars.
• Available with Through-Tool Coolant.
Reduction Bushes
To complement our range of Split Boring Bar Holders, we also offer Split Reduction Bushes for use with smaller diameter boring bars.
|
|
Benefits offered by Split Boring Bar Holders include:
• Compatability with anti-vibration bars
• Increased cutting performance
• Deeper boring capability (up to 10 times
diameter)
• Increased performance over standard
boring bars
Reduction Bushes
To complement our range of Split Boring Bar Holders, we also offer Split Reduction Bushes for use with smaller diameter boring bars.
Our extensive range of Cap and Hinged-Type Boring Bar Holders suit machines for many leading manufacturers, including Mazak, Doosan, Okuma, Mori Seiki and Hwacheon.
* Cap-Type
* Hinged-Type
In addition to our standard range, Craftsman Tools’ in-house designers can create special Split Boring Bar Holders to suit specific requirements.
|
|
SPLIT BORING BAR HOLDERS
For use with anti-vibration bars
- Deeper boring capability (up to 10 times diameter).
- Increased cutting performance.
* Available with through-tool coolant.
The Split Boring Bar Holder will also increase the performance of standard Boring Bars.
|
|
Clamping rigidity
- Accurate cutting edge positioning
- Longer tool life
- Innovative and modern design
- "Glimpse of an eye" technology
The double clamping system provides secure clamping (pressing and pulling down of the insert) with only one action which contributes to the extention of the inserts’ tool life. Especially for interrupted cutting, the impact resistance of the insert has been drastically improved.
|
|
|
Briney Eccentric Bore Tooling, an innovative, proven end mill holder design dramatically reduces total indicator runout (TIR) typical of all end mill holders using a set screw or Weldon flat set screw. Improving the out-of-concentric condition of the tool holder bore from .0008” to .0002”, the Briney holders feature an eccentric bore, imparting .0003” eccentricity in the direction of the set screw.
|
|
As the world progresses to miniaturization, and the parts to be machined are getting smaller and smaller, the machinist is forced to find specialty tools and expert solutions to meet this growing challenge.
Together with shrinking tolerances, the requirement for repeatability and indexability increase exponentially. Having the right tools is an absolute must.
Whether you have to thread, groove or bore, the Vargus MiniPro line provides you with those perfect tools to get the job done, perfectly.., the first time.
The Vargus MiniPro line was designed to provide an answer to nearly every machining operation performed on miniature, high-precision components. MiniPro includes a wide-range of both indexable and solid carbide solutions for threading, grooving or boring holes down to 2mm diameter in a wide range of materials.
|
|
| ... products without technical information |
| |
K1BL
High-speed hole EDM by Sodick for micro-holes of 0.08 mm diameter
The K1BL is an easy-to-use micro-hole EDM machine for hole diameters up to 0.08 mm.
Its strengths lie in the machining of steels, nonferrous metals, and other difficult materials. With a linear drive for the z axis, it operates with vibration-free precision and high dynamic response in the drilling of holes between 0.08 and 0.25 mm in diameter.
Highly responsive linear motors secure continuous and high precision drilling of very small holes down to the use of 80 micron electrodes. The machinining scope of K1BL, equipped with a Sodick linear motor on the main (Z axis) completes the range. In addition the high response of the linear motor increases the machining speed and reduces the electrode wear significantly.
|
|
|
The Drill 11 is a production machine designed for the drilling of parts in hard materials such as hardened steel or carbide. Its drilling capability ranges from 0.3 to 3.0 mm diameter through a depth of 200 mm. Particularly simple and easy to use, the 3 axes (X, Y, Z) numerical control makes it possible to program a series of holes for fully automatic machining.
|
|
|
|
|
|
* NEW 3D and Multi-Axis-µEDM CNC controller SX-CU offers new possibilities on the Micro-Machining with new dedicated SARIX Technologies of 3D Micro-Milling. Its combination with a continuous automatic wear compensation spindle and a "built in "Micro Wire-EDM electrode grinding device opens up new perspectives on the micro machining of ;
* 3D Micro Milling of complexes forms with radius corner down to 3 microns
* perfect fins walls and microstructures
* high precision of smaller, deeper and more precise perfect round holes
* high surface finishing of Micro Sinking cavities
* NEW SX-MMI, "On-board", easy and user friendly unlimited programming and editing software.
* NEW SX-µEDM-CAM SARIX Modul compatible to ESPRIT CAD-CAM software, integrates the new Micro-EDMing process "Multi-Axis-Multi-Step" for the machining down to 10 microns with Ra up to 0.05.
* High precision machining and accuracy up to ±1 micron.
* High performance Micro Fine Pulse Shape generator SX-MFPS for 3D Micro EDMing machining using tubes and solid electrodes from 5 microns to 3.0 mm.
* High Speed Micro EDM Drilling Technology with automatic breakthrough detection device.
* "High production capability concept" upto 8 axis for complex work pieces with X-Y-Z, back slide W-axis (Z2), C and A/B indexing axi
|
|
Best-seller machine for drilling small holes
Drilling hardened hard materials to non-metal materials such as aluminum within seconds
Using Sodick’s original water-soluble dielectric fluid VITOL-KS developed for high-speed drilling, K1C drills holes with pipe electrodes Φ0.25 to 3.0 mmwithin a matter of seconds. The machine is capable of drilling a wide variety of materials from difficult-to-cut materials to aluminum and other non-metal materials (material: SKD11, thickness: 20 mm, electrode diameter: Φ0.8 mm, drilling time: 20 sec.).
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
