|
|
Assembling of hose and tube parts for automotive applications.
Our standard assembly machine LTM-106 has a frame with variable height, lockable wheels, illumination, pneumatic system and a Lantz Control System. This machine can be equipped with different types of tools or fixtures for assembly operations. It can have one fixed table for a high volume product or we can use a quick change system. Change the assembly fixture and the machine will run the corresponding program. |
|
The EMB patented technique of pre and final assembly of cutting rings reduce assembly time and costs whilst providing superior "leak free" characteristics and reliable reproducible assembly results. The entire process of tube preparation untill the final coupling run like clock work in no time at all, thank to our investment in "state of the art" machinery.
Our SPS controlled assembly units, in paricular, provide supreme functional and cost effective performance. |
|
UNISPEED US-FL/01 - MODEL MAN
PRE-ASSEMBLING 6 > 42x4 mm
37° FLARING 6 > 42x4 mm
MATERIALS AISI 316 TI - ST 37.4
WEIGHT 40 KG
DIMENSIONS L x D x H 350 x 400 x 270 mm
TOOLS HOLDER OPTIONAL
OIL included
UNISPEED US-FL/01 - MODEL EL
PRE-ASSEMBLING 6 > 42x4 mm
37° FLARING 6 > 42x4 mm
MATERIALS AISI 316 TI - ST 37.4
WEIGHT 58 KG
DIMENSIONS L x D x H 430 x 600 x 270 mm
STANDARD VOLTAGE 400V 50Hz 3PH
MOTOR POWER 0.75 KW
TOOLS HOLDER OPTIONAL
OIL included
|
|
PRE-ASSEMBLING: 6 > 42x4 mm
37° FLARING: 6 > 42x4 mm
CUTTING: MAX Ř 100 mm
BENDING: 6 > 42x4 mm
DEBURRING: MAX Ř 42x4 mm
MATERIALS: AISI 316 TI - ST 37.4
DIMENSIONS L x D x H: 830 x 1260 x 1210 mm
WEIGHT: 262 KG
STANDARD VOLTAGE: 230V 50Hz 1PH
MOTOR POWER: 4.6 KW MAX
CONTROL BOARD: included
OIL: included
COMPRESSED AIR: 220 L/MIN.
TOOLS HOLDER: OPTIONAL
37° FLARING BLOCK: OPTIONAL
|
|
Pace1 Press
Pace1 Press is the first battery operated pre-assembling machine for cutting rings. It's weight is only 7kg and that makes it very easy to use. It is designed for 6-42mm pipes and there is plenty of force even for stainless steel assemblies. Pressure is fully adjustable. Machine has been tested with all leading cutting ring and fitting solutions on the market. |
|
CAPACITY: 2"
PNEUMATIC INPUT: MAX 7 BAR
WEIGHT: 85 KG
DIMENSIONS L x D x H: 900 x 650 x 1100 mm
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
TM Robotics offer a series of SCARA robots from the TH-250 through to the SR-1504. All have unique handling capabilities for varying workloads. The SCARA range can offer robots with arm lengths of 250mm to 1500mm, and workload capacitys from 3kg to 70kg.
Perhaps the most innovative of the Toshiba Machine SCARAs are the TH-250 and TH-350, which provide better accuracy and repeatability than comparable SCARA's, and offer quicker cycle times and faster motion. These new SCARA’s are so precise that they can even be used to good effect in the electronics industry. The TH-250 and TH-350 feature payloads of up to 3kg and repeatability of ?0.01mm. These robots are suited to applications in the handling of small components, such as electrical, mobile phone and camera parts, assembly and test equipment. Other applications that demand similar accuracy are hard disk drive assembly, as well as very high precision work, such as optical lens grinding and watch assembly. Furthermore, the TH-250 and TH-350 allow the user to place electronic components on PCB boards, or even handle the optical ‘pick up’ lenses used in CD and DVD disc drives. |
|
| The pcba|inspector is a high-resolution microfocus X-ray inspection system designed for inspecting solder joints in board assemblies. |
|
Special features:
Max. inspection area 24“ x 20“
Detail detectability of <2µ
Max. tube voltage of 100kV
Automated calculation of offset and annular ring width
Multiple-axis manipulation
Maintenance-free X-ray tube
Integrated noise suppression system
User-friendly image processing software
Easy and intuitive operation |
|
Detecting manufacturing defects such as positional, missing, skewed, misplaced, incorrect device, incorrect polarity, solder and lead defects is fast and reliable. Unique dual lighting delivers the capability of inspecting laser marking on IC’s and SOT devices. An additional benefit is that it also delivers enhanced inspection of 0603 and 0402 devices.
Developed by DiagnoSYS for operator ease of use, this true AOI software is the most advanced available. Each system utilises the same software for extended ease of use. Comparator software, included, is a perfect solution for inspecting low volume assemblies without the need for programming.
Full manufacturing integration
The ScanPoint DT addresses prototype through to medium volume requirements complementing the ScanPoint 50 in-line system which targets medium to high volume. The family is complete with off-line programming allowing programs to be generated without interfering with production. Programs can be shared across multiple DiagnoSYS AOI systems. Data logging of test results is complimented with a full rework station capability |
|
| ... products without technical information |
| |
| The pcba|inspector is a high-resolution microfocus X-ray inspection system designed for inspecting solder joints in board assemblies. |
|
Special features:
Max. inspection area 24“ x 20“
Detail detectability of <2µ
Max. tube voltage of 100kV
Automated calculation of offset and annular ring width
Multiple-axis manipulation
Maintenance-free X-ray tube
Integrated noise suppression system
User-friendly image processing software
Easy and intuitive operation |
|
Detecting manufacturing defects such as positional, missing, skewed, misplaced, incorrect device, incorrect polarity, solder and lead defects is fast and reliable. Unique dual lighting delivers the capability of inspecting laser marking on IC’s and SOT devices. An additional benefit is that it also delivers enhanced inspection of 0603 and 0402 devices.
Developed by DiagnoSYS for operator ease of use, this true AOI software is the most advanced available. Each system utilises the same software for extended ease of use. Comparator software, included, is a perfect solution for inspecting low volume assemblies without the need for programming.
Full manufacturing integration
The ScanPoint DT addresses prototype through to medium volume requirements complementing the ScanPoint 50 in-line system which targets medium to high volume. The family is complete with off-line programming allowing programs to be generated without interfering with production. Programs can be shared across multiple DiagnoSYS AOI systems. Data logging of test results is complimented with a full rework station capability |
|
In spite of all accuracy in the production process the repair / reworking of electronic PCBs belongs to the daily business. Relating to the components and used circuit boards (double-sided, Multilayer etc.) there are different requests imaginable. Also the quantity, in other words the complete quantity of repairs plays a decisive role. Beside the processes Dispensing, Placing and Soldering the process Removing und Cleaning of components is certainly added. Our µPlacer is a complex rework system, which considers all these elements with high precision.
|
|
| ... products without technical information |
| |
The tank and the blade are out of stainless steel.
The depth and the beat of the blade adapt automatically to the level of filling, in order not to brew the components unnecessarily. Good resistance to clogging.
Ideal for the coated components, painted, or of which surface treatment polluting east.
High rates. (For example 5000 parts/hour for a screw M4x30.) Capacity ZSE 151: 1,5l.
Possibility of adding a hopper great capacity.
Mechanical selector Weber.
System in advance on rail without silentblocs. Balanced linear rail: few transmitted vibrations, low noise level.
The system makes it possible to distribute components without head. Management integrated for distribution alone, or distribution and unit of screwing (of installation). |
|
| The LAYING can be carried out with or without efforts of installation and thus allows the automatic installation of the rivets, the axes, the pins and the pawns with a control of effort so necessary. One can notice that its design is close to that of the screw drivers. |
|
Air Logic manufactures a comprehensive line of nylon and polypropylene plastic fittings; the polypropylene fittings ar more chemically resistant than our standard nylon fittings. Polypropylene also provides more dimensional stability.
The fittings include Barbed Crosses, Elbows, Tees, and Unions. Barbs are available for 1/16", 1/8", or .170" I.D. tubing. The nylon fittings can be provided in black or white; the polypropylene fittings are gray. |
|
Multiline - (4 / 6 / 8 Line) - QDC
Description: The snap-type multiple line quick disconnect features a releasing sleeve that permits one-hand connecting or disconnecting of several fluid lines simultaneously. Simply push the sleeve in to disconnect the fluid lines and push the internal and external ends together to connect the lines. The design incorporates a keyed location pin to insure correct orientation of the fluid lines during connection. The internal end is designed with an automatic shut-off valve.
Material: Internal: brass or 303 stainless steel components; acetal releasing sleeve; stainless steel mounting plate, springs, ball bearings, set screw, crescent “C” rings and steel “E” ring. External: 303 stainless steel components; stainless steel backing plate
Seals: Internal: three Buna-N O-rings, OR-QDC-B (3 O-rings), for each line. Optional materials: EPDM, Viton®, Silicone, Chemraz® and Fluorosilicone.
Note: Multiple line quick disconnect can also be ordered in 316 stainless steel and double shut-off configurations. Contact factory for ordering information.
|
|
|
|
see the results for the following category
