|
|
2 ROLLS BENDING MACHINE
This series consists of one model only, the CE2 with two driving rolls with a knurled surface. The machine structure is manufactured in stabilised steel, and the shafts are constructed from thermally treated NiCr steel fitted with ball-bearings to protect mechanical parts from wear, thus ensuring their long lifespan. .
The CE2 is fitted with a helical geared speed reducer, lubricated in oil-bath and is operated via the double pedal board to change the direction of rotation of the rolls.
This bending machine allows the bending not only of section bars, bars and tubes of different dimensions and materials, but also the curling of metal straps and the twisting of square iron up to 8 mm in thickness.
TYPE OF SIMASV BENDING MACHINES
TWO DRIVING ROLLS
CE2 - This series consists of one model only, the CE2 with two driving rolls with a knurled surface.
THREE DRIVING ROLLS
CHV.3360 - Consisting of a solid structure in stabilised steel, the CHV.3360 visualised bending machine is fitted.
CHV.3380 - Consisting of a solid structure in stabilised steel, the CHV.3380 visualised bending machine is fitted.
CHV.4100 - La curvatrice a tre rulli trascinatori CHV.4100 è costituita da una solida struttura in acciaio.
3 ROLLS PYRAMID
PHV.350 - HYDRAULIC PYRAMID BENDING MACHINES WITH THREE DRIVING ROLLSHydraulic Bending Machine with two stationary.
PHV.370 - HYDRAULIC PYRAMID BENDING MACHINES WITH THREE DRIVING ROLLSHydraulic Bending Machine with two stationary. |
|
The EMB patented technique of pre and final assembly of cutting rings reduce assembly time and costs whilst providing superior "leak free" characteristics and reliable reproducible assembly results. The entire process of tube preparation untill the final coupling run like clock work in no time at all, thank to our investment in "state of the art" machinery.
Our SPS controlled assembly units, in paricular, provide supreme functional and cost effective performance. |
|
Features:
- Bending Machine with inside mandrel and 1 controlled axis (bending).
- It is the evolution of the QBMS Series.
- Excellent solution for stainless steel bending.
- The curve plane is controlled by means of an index dial graduated to 360º and the distance between bends is controlled by means of slid able stops.
- User-friendly operation and programming PLC machine through a colour touch screen with a graphic representation of each component to be controlled. |
|
We have introduced a full range of sheet and profile roll-bending machines. This decision is based on our 'one-source supplier policy' and the many years of experience in building sheet metal machinery.
Three and Four Sheet Roll-Bending Machines
Our selection of sheet roll bending machines includes models with either three or four rolls for sheet lengths from 2,100 mm up to 4,100 mm and thicknesses up to and including 110 mm!
The use of planetary gearboxes and hydraulic motors results in almost maintenance-free equipment with an optimum quality/price ratio.
Range :
-3 rolls type 3HBR
-4 rolls type 4HBR
Universal Profile Roll-bending Machines
We offer affordable, high quality standard Profile Bending Machines that use the same technology as our sheet roll machines. Standard modular tooling can be configured to roll most standard sections.
|
|
Innovative machines with three-roller system for bending all types of tube and profile with wide radius bends. 80% of profiles can be bent using standard tooling. The bend radius can be set by changing the position of the central roller.
All models feature an extremely rigid pyramid structure, forged steel roller shafts, micrometric tool adjustment, and internal microprocessor for central roller position programming and readout.
Typical applications: handrails for spiral stairs, coils for heat exchangers and boilers, large metal arches for the building industry, arches for furniture, gates and railings. |
|
BENDING: 6 > 42x4 mm
MATERIALS: AISI 316 TI - ST 37.4
DIMENSIONS L x D x H: 680 x 880 x 910 mm
WEIGHT: 100 KG
STANDARD VOLTAGE: 400V 50Hz 3PH
MOTOR POWER: 1.1 KW
CONTROL BOARD: included
ELECTRICAL LIMIT SWITCH: included
OIL: included
|
|
New REINFORCED version for tubes up to dia. 76 x 2mm stainless steel
Electronically programmable machines for bending tube and profiles with very tight radii: from 1.5 to 2.5 times the tube outside diameter [the bend radius depends on tube outside diameter, wall thickness, and material]. Designed to meet the needs of users who require the maximum possible bend quality combined with very tight bend radii, ideal for medium-lowproduction volumes. Ease of use, flexibility, and rapid tooling change mean that the initial investment can be quickly recouped.
Typical applications: construction of stainless steel handrails for stairs, bullbars, roll-bars, special exhaust pipes, lamps, pipes for the air conditioning sector. |
|
Bending machine functioning on the principle of stamping.
6 standard models of bending machine allowing to curve tubes of 3/8 " to 16 ", and up to 20 " in option:
0B58 (jack 8 Tons) capacity: 3/8 " to 1 1/4 "
OB 30 (jack 12 Tons) capacity: 3/8 " to 2 "
OB 40 (jack 18 Tons) capacity: 3/8 " to 3 "
0B 50 (jack 30 Tons) capacity: 2 " to 4 "
OB 50 P (jack 30 tons) capacity: 4 " to 8 "
Super OBMP150 (jack 100 tons): 4 " to 16 " (20 " in option)
Three types of motorization: electric, pneumatic, gasoline.
Accessories available for bending until 180° for models OB 30 and OB 40
|
|
Bending machine functioning according to the principle of rolling up for tubes round or square and profiled out of carbon steel or stainless, copper, alloy of aluminum, etc...
2 standard models: Building site and Production
Capacity of bending on tube steel with hollow or the chuck: from 8 to 42.4 mm
Angle of maximum bending: 180°
Manual or electric version.
Options: arm carry-chuck and positioner of plan for bending of parts 3D (3 axes) to the chuck.
|
|
HB, Profile bending machines – Precision bending up to 180°
Easy to operate
Particularly suitable for the tight and precise bending of round and flat bars and other profiles.
Precise bending of whole series
True to size bending of whole series possible, thanks to angular and linear stops.
High bending power
with covered needle bearing and nickel plated turn-table.
Various sizes
for various different applications. |
|
Description:
- Ratchet action for increased leverage.
- Bypass the ratchet for fast, direct bending on smaller sizes.
- Heavy-duty welded construction for long, reliable service.
- Built-in bending degree indicator and easy to use bending charts for accurate, consistent bends. |
|
This inexpensive and rugged machine can be bolted to any solid surface. The fully welded construction ensures that it will give years of maintenance-free service. It is simple and quick to use and has all the necessary features to ensure accurate repeatability.
The bender features an eccentric quick-clamping block which locks the copper bar in place. An extension bar provides the leverage to bend the copper round a 10mm radius former. An adjustable stop can be positioned to limit the bending angle and an adjustable length stop can be set to ensure that the bend is at the correct distance from the end of the bar.
|
|
Bending machine functioning on the principle of stamping.
6 standard models of bending machine allowing to curve tubes of 3/8 " to 16 ", and up to 20 " in option:
0B58 (jack 8 Tons) capacity: 3/8 " to 1 1/4 "
OB 30 (jack 12 Tons) capacity: 3/8 " to 2 "
OB 40 (jack 18 Tons) capacity: 3/8 " to 3 "
0B 50 (jack 30 Tons) capacity: 2 " to 4 "
OB 50 P (jack 30 tons) capacity: 4 " to 8 "
Super OBMP150 (jack 100 tons): 4 " to 16 " (20 " in option)
Three types of motorization: electric, pneumatic, gasoline.
Accessories available for bending until 180° for models OB 30 and OB 40
|
|
PRE-ASSEMBLING: 6 > 42x4 mm
37° FLARING: 6 > 42x4 mm
CUTTING: MAX Ø 100 mm
BENDING: 6 > 42x4 mm
DEBURRING: MAX Ø 42x4 mm
MATERIALS: AISI 316 TI - ST 37.4
DIMENSIONS L x D x H: 830 x 1260 x 1210 mm
WEIGHT: 262 KG
STANDARD VOLTAGE: 230V 50Hz 1PH
MOTOR POWER: 4.6 KW MAX
CONTROL BOARD: included
OIL: included
COMPRESSED AIR: 220 L/MIN.
TOOLS HOLDER: OPTIONAL
37° FLARING BLOCK: OPTIONAL
|
|
| ... products without technical information |
| |
For tubes:
Exhaust
Iron work
Thin steel
Capacities: Ø: from 25 to 63,5 Misters.
Ray of maximum bending: 125 Misters.
Angle of maximum bending: 165°
Mini thickness:
Thickness minimum of the tubes to be curved according to the external diameters:
1,25 mm for: Ø 25 to 47,5 mm (1 " to 1 7/8 ").
1,50 mm for: Ø 50,8 mm to 57 mm (2 " to 2 1/4).
2,00 mm for: Ø 60 and 63,5 mm (2 3/8 " and 2 1/2 ").
Features:
Asynchronous motor 2200W - 50Hz, 230/400V
Three-phase current (to specify the voltage with the order).
Classify insulation IP44.
Obstruction: 1,10 X 0,60 Mr.
Height of work: 925 Misters.
|
|
... see all the products in the category
Presses
|
| ... products without technical information |
| |
|
|
see the results for the following category
