|
|
CERTI-CRIMP Hand Tools are top-of-the-line, premium, hand-operated tools for
crimping a broad array of terminals, contacts and special wiring devices available
from Tyco Electronics. They are designed to exacting specifications to produce
consistent, high-quality terminations. A potential service life of over 50,000
cycles is possible, depending on operator care.
|
|
The CHAMPOMATOR 2.5
Terminating Machine is a
compact, semiautomatic
bench machine for terminating
multiconductor, jacketed
cable with a variety of
AMP connectors having
insulation displacement
contacts. It is microprocessor
controlled, and programmed
using a membrane-
switch keyboard.
Pertinent information for
operation, including diagnostics
and error conditions,
is displayed on the
control module.
|
|
Product Facts
n Low applied costs
n Terminates most jacketed
cable
n Straight (180°) or rightangle
(90°) wire dress
n Microprocessor controlled
n Stored program capability
n Selective termination of
connector positions
n Rapid tooling changeover
for different connector types
n Manufactured under an
ISO 9001 Certified Quality
System
|
|
|
|
|
|
Applicators and tooling from Tyco Electronics can be your key to productive, profitable wire harness manufacturing.
These applicators come from a long tradition of quality, reliability, and precision. Manufactured from high grade tool steels, and processed through state-of-the-art CNC equipment for tightest tolerances, our applicators are made for high repeatability and fast throughput.
These standard applicators accommodate most requirements for crimping AMP and non-AMP terminals to produce consistent, high quality terminations. The applicators are available with fine adjust and pneumatic feed and can be designed for nearly any manufacturer's terminal.
Manufactured from high grade tool steels, and processed through state-of the-art CNC equipment for tightest tolerances, Tyco Electronics applicators are made for high repeatability and fast throughput.
Every piece goes through an exhaustive test and calibration process, with each one shipped with test samples verifying operation and full documentation for operation, adjustment, and maintenance.
Tyco Electronics offers an unmatched selection of applicator styles and terminal types, with configurations for both Tyco Electronics and other manufacturers’ terminals. Styles are available for non-Tyco Electronics terminating machines from both domestic and foreign sources.
At Tyco Electronics we do more than supply the world’s leading applicators. We provide service, technical support, and maintenance and repair, both on site and at our service centers. We know how critical reliable production is, and our products and services are committed to keeping your production running.
|
|
|
|
|
|
AMPOMATOR System III
As your workload changes, the best change for you to make is to the AMPOMATOR System III Leadmaker. It takes maximum advantage of the automation possibilities available with the System III Applicator and AMP-O-LECTRIC ST III Terminator. There's a seamless flow of information, so setup, terminating, and quality control happen virtually without operator intervention. Based on the familiar Alpha 433, with easy-to-use TopWin software.
The Control Center...
The AMP-O-LECTRIC ST III Terminator gives you faster changeover and higher uptime. Featuring automatic adjustment of initial crimp height with stepper motor drive, wire line adjust and control software that makes fine adjustment of crimp height automatically once a connection is established with the iButton module.
Full electronic control for full automation.
It Starts with the Applicator...
The System III Applicator features a better aligned, round ram, an iButton data module for built-in intelligence and a separate feed - independent of the ram stroke.
The System III Applicator combines the best of the past with the thinking of today.
Your choice...
Choose your Seal Loading Unit.
The PAWOMAT SLU is integrated into the leadmaker with an I/O interface. It features improved processing speed and cycle time.
The Komax mci 761 seal applicator is integrated by the MCI interface for seamless operation. The OMI device controls the unit with just two keys and a digital potentiometer.
|
|
Intermediate to high volume rates, up to
600 assemblies per hour
l Flexible platform accommodates one or
two insertion modules as well as
secondary application modules
l Version to handle in-line, radial, and
linear/angularly opposed cavities
l Programmable linear slide and rotary table
l Easy programming through keypad
display
l Palletized fixture system for greater
efficiency and production rates
l Microprocessor controlled
|
|
Product Facts
n No need to strip magnet wire
n Connects up to 3 wires in 1 splice
n Crimp Quality Monitor (CQM)
auto adjusts crimp height and enables 6-sigma process quality
n Height adjusts in .0005 [0.013] increments over .064 range
n Change tooling quickly without major adjustments
|
|
SILVYN® LCC-2
Protection against liquids; Tensile strength; Highly compreshion proofed; Highly flexible; For higher mechanical stress
Application range
Mechanical engineering
Plant engineering and construction
Outdoors application
Everywhere where liquids are in the environment
applications with mechanical stress
Design
Spirally wounded metal protective conduit with roughenged profile
PVC outer sheath
|
|
|
Protective conduits for cables and accessories are available for temperatures from -60°C up to + 230°C, for protection class up to IP 69K, they are resistant to solvents, liquid-tight, or with a silicone cover. You will find conduits in the mechanical engineering and equipment manufacturing, in automation, in power stations, or in the automotive and railway industry. They keep electromagnetic impacts away from data lines, they protect cables against physical impacts, or they guarantee easy sterilizability for tools and instruments in the medical sector.
|
|
|
Protective conduits for cables and accessories are available for temperatures from -60°C up to + 230°C, for protection class up to IP 69K, they are resistant to solvents, liquid-tight, or with a silicone cover. You will find conduits in the mechanical engineering and equipment manufacturing, in automation, in power stations, or in the automotive and railway industry. They keep electromagnetic mpacts away from data lines, they protect cables against physical impacts, or they guarantee easy sterilizability for tools and instruments in the medical sector.
|
|
Straight Fitting - Fixed External Thread
Type: A - Adaptaseal
Description : For insertion into threaded entries & knockouts. Locknut supplied with METRIC THREAD ONLY
Material: Polyamide (Nylon) 66
IP Ratings: IP66, IP67, IP68, IP69k
|
|
Flexicon Nylon Straight NPT Thread Fittings
For use with 16 mm Ihru 67 mm Flexicon corrugated conduit/tubing.
Seven NPT threaded choices for use with seven different conduit sizes.
Suitable for use with both fine and/or coarse pitch conduit/tubing.
Unitary design and assembled shipment allows fast fit.
All nylon construction resists saltwater, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed by UL certification or testing.
No threading of the conduit/tubing is required to install.
Locknuts NOT included, click here for Nylon Locknuts.
Suitable for use by all original equipment manufacturers.
Protection class IP 66 per EN 60529 including high pressure water jet from any angle.
Vibration and tamper resistant but easily removable with use of electricians screw driver.
Click here for NPT thread specifications & IP Rating.
Consult factory for FPAX finings for use in IP 68 or 67 (as well as 66) applications.
|
|
Conduit & Cable Fittings
Thomas & Betts offers one-stop-shopping for electrical conduit and fittings with a portfolio of leading brand names -- Ocal®, Red Dot®, Steel City®, Shureseal, T&B®, Shamrock®. Whether for hazardous location applications, such as an oilrig or refinery, heavy-duty applications such as manufacturing or transportation, or light-duty applications such as hospitals or hotels, you can count on the brands of Thomas & Betts for dependable, quality assurance.
|
|
Electrician Supplies
Making sure electricians, installation technicians and contractors are equipped with the tools they need to do their job efficiently and safely is a fundamental goal of
Thomas & Betts. That's why we offer a wide assortment of the highest quality hand tools, wire connectors, fishtape, lubricants, and other essential everyday supplies for electrical construction, installation, and maintenance.
|
|
Medium Weight Conduit
Type: PP
Material: Polypropylene
Applications: Acid Resisting Environments
IP Ratings: IP66
Part No Size Colour Name
PPFM13/BL/50M 13_mm Black medium weight polypropylene
PPFM16/BL/50M 16_mm Black medium weight polypropylene
PPFM21/BL/50M 21_mm Black medium weight polypropylene
|
|
|
|
|
|
Adaptaflex have a choice of fifteen individual metallic conduit systems manufactured either in galvanized steel or stainless steel.
A range of 3 different conduit types provide a solution for liquid resistant specifications with a further 3 conduit options in liquid tight covered steel conduit for especially demanding environments. Conduit ranges are offered in nominal conduit size from 3mm for CCTV/roller shutter doors and for protecting fibre optics cables right up to 75mm for larger cable carrying capacity.
Overbraided conduits are particularly suitable for installation in abrasive environments. Where applications call for enhanced low fire hazard properties or EMI screening then there is the option of high specification tinned copper overbraided for greater EMI protection levels.
In addition a range of fittings are specifically designed to maintain system integrity including fixed and swivel fittings, straights, 90°, 45°, and a host of accessories including locknuts, enlargers, reducers and converters. Many of our conduit systems have industry recognised approvals including British Kitemark, CE Approval, UL Listing, NF, LUL, DB, and Lloyds Register amongst others.
Advantages
High compression/crush strength
Tensile strength - pull off load under tension
Impact resistance
Inherent fire protection on uncoated versions
Corrosion resistant - stainless steel options
Braided - High level EMI screening with tinned copper overbraided
Greater temperature tolerances
|
|
|
|
|
|
Heyco-Flex I Liquid Tight Conduit
Flexible, Nonmetallic Liquid Tight Electrical Conduit
3/8" thru 2" trade sizes.
Use with nylon Heyco-Flex Connectors: Snap-in. Straight or Sweep.
Mayalso be used with Heyco's Die Cast Fittings tor Liquid Tight Conduit.
Resists corrosion, abrasion, oil. water, acid, metal shavings, and rough environments.
Resists abuse, pull, and crushing.
Temperature ratings: 80°C (203°F) DRY; 70°C (160°F) OIL Resistance 60X (140°F) WET locations
Passes submersion testot70 psi.
Mounting Brackets are available.
Smooth inside tor easier wire pulling: no hazardous sharp edges or burrs: will not damage conductors.
Lightweight and lower installed cost.
Quick installation; cuts with utility knite, PC cutter or Heyco cutting tool (#8340).
Integral rigid and flexible PC construction.
Suitable tor indoor/outdoor use: HVAC Equipment. Machine Tools. Marine Equipment. Motors and Controls. Printing Equipment. Pumps. Refrigeration Equipment
Approved for direct burial.
Order Part No. 8340. VF-28 Cutting Tool, for cutting Heyco-Flex conduit and tubing cleanly and evenly.
|
|
Straight Swivel Fitting - External thread
Type: M - SPL, SPLHC & SPUL
Description: For insertion into threaded entries & knockouts.
Material: Nickel plated brass
IP Ratings: IP66, IP67, IP68, IP69k
Part No Size Colour
SPL10/M12/M 10_mm Silver
SPL10/PG7/M 10_mm Silver
SPL12/M16/M 12_mm Silver
SPL12/PG9/M 12_mm Silver
|
|
| ... products without technical information |
| |
Woodhead's Festoon Systems provide a simple, inexpensive method of handling cables and hoses, but have special space requirements which must be considered to select the proper system. The height of the system is determined by the loop depth and the required working travel. A system with a greater depth will require fewer cars and less storage than a system with a shorter loop depth.
|
|
|
VAHLE festoon systems support conductor cables, flat or round, and hoses (for pneumatic and hydraulic applications) to mobile equipment. The cable carriers are well guided in C-tracks, on diamond tracks or I-beams.
|
|
Power feed supply for Ibeam (IPN ou IPE)
for all mowing engine, machine, cranes,
standard application for inside or outdoor
version for flat, round or hose or twice
for Ibeam section 48 to 140mm
up to 140mm please ask us specia trolleys
version with 2,3 or 4 wheels
|
|
| ... products without technical information |
| |
Data and energy
Unrivalled worldwide, eks Engel presents a new Hybrid Splice Box inside the FIMP product line that makes it possible to combine data and energy.
Furthermore, a new version with a SC-RJ coupling which allows combining multimode, singlemode and POF in one plug will be presented. The front panel of the Hybrid Splice Box can be outfitted with up to four RJ45 Click&Snap-, or alternatively with two Smart Hole-Modules.
|
|
Function maintenance DIN 4102 part 12
Maintaining the power supply in the event of fire. Function maintenance of electrical cable systems which supply equipment of relevance to safety is an important topic when it comes to rescuing human lives and fighting fires.
Protected cable passages to DIN 4102 part 12
Fireproof closure of wall and ceiling passages. OBO offers a practical range of cable passage protection from hard filling through cable fire protection padding, foam blocks, foam plugs to assembly insulators for wall and ceiling passages. All products are subject to the specified fire protection tests and have been awarded the corresponding certifications by the German Institute for Building Technology. The same applies to the various laying and fitting systems used to preserve the functioning of electrical cable systems.
|
|
|
|
see the results for the following category : 
