|
|
LEFON Stainless Pipe Cutting Saw / orbital saw, ideal for cutting Stainless Steel Pipe / Tube . Four model available, R4,R6,R8 and R12
R4, working range: pipe OD:1/2"-4", pipe wall thickness: 1 - 7mm,
MSRP US$3999
R6, working range: pipe OD 3"-6", pipe wall thickness: 2 -10mm,
MSRP US$4999
R8, working range: pipe OD 6"-8", pipe wall thickness: 2 -10mm,
MSRP US$6499
R12, working range: pipe OD 8"-12", pipe wall thickness: 2 - 10mm
MSRP US$7899
Key advantage of this orbital cutting machine:
* Burr-free
* Multipoint clamping to eliminate pipe deformation
* Easy to operate
* Precise square cutting
* Cutting and Beveling simultaneously
* Highly reliable, long working life
Applicable to the following material:
* Alloy Steel Pipe (e.g. stainless steel)
* Carbon Steel Pipe
* Non-ferrous Metal Pipe
* Plastic Pipe
* Casting Iron Pipe
* Highly reliable, long working life
|
|
|
The robust M-16 Hydraulic hose saw is ideal for cutting heavy hose all day long. Designed for not just braid, but also spiral and helix reinforced hoses. The M-16 features a 16 inch blade, 10hp motor, hydraulically powered bending mechanism, and a self contained wet cutting system. These features allow you to cut heavy hose up to 2 inch 6 spiral with ease. The hydraulic bender allows for excellent speed control during the cut, and a quick retraction stroke. The self contained wet cut system controls contamination, and reduces smoke and fumes. Many operators find that the combination of these features eliminates the need for additional cleaning of hoses after cutting. If you cut a large quantity of heavy hose, this is the machine for you.
|
|
.Hose size : up to 1 1/4" 4 SP
.Blade diameter : 300 mm
.Motor : 2,2 kW (3 HP) / 230-400V 3 ph / 3000 rpm
.Weight : 36 kg
|
|
|
|
|
|
Portable Tube Saws
Tube cutting made easy!
Cutting thin-walled stainless-steel tubes and elbows using the superior «planetary cutting technology».
Deformation-free clamping system by integrated clamping jaws made from hardened aluminum-cast for different tube diameters.
Advantages:
• Lightweight and easily transportable machine (only 23 kg/26 kg) to provide flexibility for on-site applications
• Deformation-free clamping of thin-walled tubes
• For cutting of thin-walled tubes and elbows
• Cutting of stainless steel tubes with a OD < 120 mm/4.7" (PS 4.5) or a OD of < 170 mm/6.7" (PS 6.6)
• No rework necessary because of a burr-free and square cut
• Cold cutting process prevents corrosion
• NEW: Integrated laser pointer to determine the cut off point
• Orbital cutting process saves time
• Multipoint clamping system of tubes
• Fast adjustment of tube dimensions
• NEW: Now available with press fitting blade/bevel combination cutters
Your benefits:
• Square, burr-free and deformation-free pipe end
• Cold machining process
• Cutting in seconds
• Increased productivity
• Increased service life of tools
|
|
| ... products without technical information |
| |
SUPER BROWN 350/60 SA
• Mechanism for the rotation of head block for angled cuts up to 60° left and 45° right with blocking lever.
• Pneumatic vice with removable anti-burr.
• Pneumatic cylinder for head movement, with brake for speed adjustment.
• Transmission by means of a double expandable pulley for speeds variable between 18 and 93 rpm.
• Head tilting on adjustable self-lubricating bushings.
• Reverser.
• Drive pedal for semi-automatic cycle.
• Emergency push button with key on control panel.
• Blade lubrication-cooling system with electric pump.
• Coolant liquid vat with extractable pump for vat cleaning.
• Complete protection guard with rapid blade change system.
• Piece support arm with sliding roller.
• Bar stop with millimetric bar.
• Circular blade ø 350.
• Blade cleaning roller.
• Pedestal in welded metal sheet, 49 kg.
• Instruction book for use and maintenance.
• Set of wrenches for the maintenence.
|
|
|
|
|
|
Sandvik Coromant’s new GC1125 grade lives up to the demands of the leading parting and grooving tooling system, CoroCut® 1-2 edge and is now the first choice to achieve improved performance in parting, grooving, turning and profiling operations in a wide geometry range.
The optimization of properties for this grade delivers a wider application area and the capacity to handle improved cutting data. GC1125 has a good all round ability and provides the means to improve performance in a wide geometry range across many parting, grooving, turning and profiling operations. It is the first choice for application in steel and stainless steels and excels when machining cast iron and HRSA materials.
These advantages result from a technological breakthrough in coating and substrate technology. The combination improves wear resistance and security, either when running at higher cutting speeds or for a longer time in cut. The coating is new, PVD with TiAIN layers, including properties designed for the GC1125’s wide application area. New, fine grained substrate optimised for steels and stainless steels has improved hardness and supports increases in cutting data.
GC1125 is a simpler option, enabling machine shops to do more with one grade. Its wide geometry range offers improved performance to a larger number of machining operations.
In parting, it is optimised for steels, stainless steels and HRSA materials, a first choice in CF and CR geometries. CF is the low feed choice, giving excellent chip control and surface finish, CR the strong geometry for parting off bars and interrupted cuts at high feeds.
|
|
ISCAR-GRIP
Parting Inserts
DO-GRIP
First choice for parting. Double-ended inserts. Self clamped for deep grooving and large diameters. Screw clamped for small diameters.
SELF-GRIP
Single-ended insert for deep grooving and large diameters. Has a stopper for high radial accuracy.
CUT-GRIP
Single-ended insert. Self and screw clamped options. For tool users.
DO-GRIP for Swiss Automatics. The most economical, double-ended parting and grooving inserts in 1.0 - 3.0 mm (.039 - .118") widths that can be mounted on small shank 8, 10, and 12 mm (.315, .394, and .472") holders. The new design has a very short clamping head and with a slanted screw for convenient
indexing. These features are essential for operating on Swiss type automatic machines that have very limited space.
DO-GRIP is an optimal solution for grooving and parting of small shafts and tubes.
|
|
Sandvik Coromant is now extending its premium program of cutting tools for parting and grooving which will, no doubt, have great influence on machining productivity.
CoroCut 3 brings a third cutting edge to the shallow parting of tubes, bars and grooving operations. The extremely small parting widths in 2,0, 1,5 and 1,0 mm facilitates will reduce the raw material usage considerably.
The insert is held securely by a unique clamping solution ensuring accurate location and easy to use. This in combination with very tight indexing tolerances will produce workpieces with very close length tolerances.
Two dedicated insert geometries ensure peak performance and excellent surface finish in all workpiece materials. The very same holder can be used for all insert widths giving maximum versatility.
|
|
|
|
|
|
Grooving and Parting-Off applications just got better. Introducing TGP25 and TGP45 - new grades, new technology with DURATOMICTM coating gives impressive results.
Not only do these two grades feature the Duratomic coating technology, they also mark the beginning of a new generation for grooving and parting-off. Although designed for steel machining, these grades can also be used in cast iron and stainless steel with excellent results.
TGP25 - THE NEW GRADE FOR GROOVE TURNING
The unique and secure clamping system of Seco Multi Directional Turning (MDT) allows high speeds and feeds while securing long and consistent tool life.
The rigidity of Seco MDT can be used to fully exploit the extended cutting data capability of TGP25. Available in all widths, corner radii and chipbreakers,
TGP25 gives outstanding performance over a large application area and its superior edge integrity ensures an excellent surface finish too.
TGP45 - THE LATEST GRADE FOR PARTING-OFF
Team up the impressive stability of the HSS-blades for parting-off with 150.10 inserts and you can take full advantage of the cutting data capabilities of TGP45.
With superb performance in a wide application area, TGP45 is available in the most common widths and chipbreakers. It has a high level of wear resistance and allows high cutting data together with long tool life. The superior edge integrity will give you an excellent surface finish as well.
TGP45 is also a good choice for milling when using 335.10 disc milling cutters.
|
|
Until 340mm and 690mm of wood, max. 0,85kW.
- Power
- Ergonomics
- Adapted to the industrial lifespans
Maintenance and ease of use
The pneumatic cut-off saws of the series PR 35-11X are adapted only to one manual use. The blade measures 350mm maximum. The saw is designed only for the wood cutting. The maximum size of cut cannot exceed 340mm (for the cutting on a side), and 690mm (for cutting speak two sides).
|
|
DCS3410TH
Chain Blade, Guide Bar Cover, Chain Cover, Wrenches
FEATURES
- Sealed tank system.
- Allows professional and safe working in combination with climbing harnesses and hydraulic lift platforms.
- Optimum Vibration damping.
- Fast acceleration and low emissions.
- Easy, uncomplicated starting.
|
|
The Lynx LCC30 Concrete Chain Saw is used for fast cutting of concrete, reinforced concrete, conduit, brick and other masonry. Plunge cutting and square corner cutting is not a problem.
The LCC31 Concrete Chain Saw is used for heavy duty cutting applications involving concrete, reinforced concrete, brick and other masonry products, and stone. Plunge cutting and square cutting are not a problem.
|
|
|
|
|
|
Precision milling/cutting machine (router) the MECAPRO product line offers a very attractive performance / price ratio.
The wide choice of spindles and functions will meet all requirements regarding the machining of materials in the sectors of advertising, sign, sign board, POP, plastics, aluminium transformation…
Some of materials to be used on (according to the selected spindle and tool) :
- Plastic in rigid plates (PMMA-PC-PS-PVC-ABS..)
- Expanded plastic and alveolar plates
- Rigid foams (PU- PS-…)
- Semi rigid foams (KAPA line®,…)
- Composite materials : Alucobond®, Dibond®, Reynobond®,..
- Wood and by-products.
- Polyester resins.
- Vacuum formed parts in plastic or composite
- Light alloys with Aluminium or copper basis.
- Steel and stainless steel
- Stones, marble, granite (only engraving)
Etc…
Dimensions : 1020 x 1520 mm till 6050 x 2020 mm.
The heavy MECAPLUS range is designed for the intensive machining of aluminium, composites and plastics in strong thickness.
Dimensions : 1000 x 2000 mm till 6100 x 2100 mm.
|
|
DIADISC 45OO
High-tech precision cut-off saw for the laboratory
This new precision cut-off saw has been designed for almost universal
use in laboratories. The standard model is thus optimally equipped.
Special characteristics:
Switch-controlled electrical cutting height adjustment of saw blade
Sliding table, free of play, with prismatic roller guides
Parallel stop with digital measuring system and fine adjustment
Integrated suction arm with brush head. It can be swivelled and adjusted in height
Integrated Micro-atomizer for selective dry or wet operation for highly efficient lubrication and cooling of the saw blade and workpiece
Reserve content level indicator for the micro-atomizer tank
Halogen illuminated work area, with non-dazzle and dimming features
Optimum positioning of operating and display elements
Saw blade and cutting disk depot for 6 tools in the machine (optional)
|
|
DIASLIDE 7OOO
3 axial precision cut-off grinding machine
For materials which are delicate and difficult to machine, such as glass, ceramic and composite materials, but also plastics, steel and non-ferrous metals.
The cutting procedure takes place in several steps governed by defined motions in the Z axis in combination with continuous X stroke (cut-off stroke). Severals consecutive cuts can be made (Y axis).
Very hard material textures can be cut to quality standards, thanks to adjustable machining parameters such as cutting disk speed, X feed velocity, Z motion, selective dry or wet cutting etc.
|
|
| ... products without technical information |
| |
- 18,000 RPM Extension Vacuum cut-off tool uses 3" (76 mm) diamond cut-off wheels with 3/8" (10 mm) center hole
- 1 hp motor delivers cutting speed power
- Vacuum shroud effectively captures source dust
|
|
- 20,000 RPM cut-off tool uses 3" (76 mm) diamond cut-off wheels with 3/8" (10 mm) mandrel
- An attached, non-marring plastic flange protects surfaces during cutting
- .7 hp motor delivers cutting speed power
- Tool is equipped with 94300 Dynaswivel®
- A 3" (76 mm ) diamond wheel with integrated mandrel is required (sold separately)
- Unique shroud and flange design add to existing cut-off family
- Ideal for trimming fibreglass/composite parts
|
|
G Series grinders are available in a choice of 0.3kW, 0.6kW and 1.0kW motors offering the right performance for every application. Configurations available include straight, extended straight and angle with a variety of attachments.
The G1 series (0.3kW) is ideal for light material removal, cleaning rough castings, deburring parts, cleaning up welds and other finishing tasks.
The G2 (0.6kW) series is perfect for big jobs having a high torque motor with high stall.
The G3 (1.0kW) series has a superior power to weight ratio with one of the highest stall torques on the market today. With its contamination free speed controller and one nut access for servicing it is the tool of choice for maximising material removal rates.
The G3A120PP95AV angle wheel grinder (125mm) has one of the lowest vibration levels available today with autobalancer and unique anti-vibration side handle fitted as standard.
|
|
12,000 – 18,000 RPM
0.5 – 1.1 hp (0.4 – 0.8 kW)
■ Composite and steel housing
■ Front, Side & Rear Exhaust
|
|
DIADISC 45OO
High-tech precision cut-off saw for the laboratory
This new precision cut-off saw has been designed for almost universal
use in laboratories. The standard model is thus optimally equipped.
Special characteristics:
Switch-controlled electrical cutting height adjustment of saw blade
Sliding table, free of play, with prismatic roller guides
Parallel stop with digital measuring system and fine adjustment
Integrated suction arm with brush head. It can be swivelled and adjusted in height
Integrated Micro-atomizer for selective dry or wet operation for highly efficient lubrication and cooling of the saw blade and workpiece
Reserve content level indicator for the micro-atomizer tank
Halogen illuminated work area, with non-dazzle and dimming features
Optimum positioning of operating and display elements
Saw blade and cutting disk depot for 6 tools in the machine (optional)
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
