|
|
Simasv's bending machines are extremely heavy-duty and easily adaptable to any working requirement. All models are supplied with speed reducers, adjustable torque limiters and can be positioned both in a vertical or horizontal axis.
They are available in the models with three smooth driving rools and two knurled driving rolls, all equipped with a wide range of standard rolls to bend different types of profiles, bars, tubes, etc...
|
|
Bending capacity
ø 42 / ø 60 / ø 90 / ø 100 / ø 120 / ø 150
Short description
- Automatic bending axis electronically controlled (CNC)
- Memory for programs
- The tube positioning and tube rotation are manually adjusted
- Ideal for tubes having normal geometric forms
- Ideal for small or large production amounts
- for shift production
- Left and right bending
|
|
Model-52
Manual stationary bending machine
Orient
Mandrel and without mandrel
bending of tubes and profiles by winding method.
Abilities
- Tube profile changing control in bending place
- 2 axes control (A;L;)
- Bending of M- type parts
- Absense of clash between machine
and tube during complex bending
- Individual tool specification
|
|
|
|
|
|
Having set the benchmark for pipe cutting and beveling machines for over 40 years, our new range of machines takes us even further forward. The new GF 4, GF 4 AVM, GF 4 MVM are now available!
Your benefits:
- Square, burr-free and deformation-free pipe end
- cold machining process, cutting in seconds
- Simultaneous or seperate cutting and beveling
- Cost-effective, increasing productivity
- Even longer tool life
What´s new?
- Optional feed module AVM or MVM for an automated or manual cutting process
- Locking mechanism prevents unauthorized usage and theft
- Weight reduction for ease of movement
- A new ergonomically-designed motor handle for a safer and more comfortable operating position, which also enables easier cutting of elbows
- Integrated laser pointer to determine the cut-off point
- 2 position aluminum clamping jaws to reduce chatter and enable smaller length of pipe to be machined
- 1 multifunctional tool for all adjustments on the machine
- Extended speed range (65-125 rpm), ideal for the cutting of high-perfomance materials (Haselloy, P91, etc.)
- Swivel cable with a quick-disconnect coupler for easy and quick replacement of power cables
- The new saw blade guard protects against flying chips and comes with a measuring port
|
|
|
|
|
|
Pipe Cutting and Beveling Machines with automatic feed module AVM.
A new highlight in the GF-Series of Orbitalum Tools!
The new GF machine for cutting and beveling of high, low and unalloyed metal pipes has demonstrated convincing operational results with large pipe diameters and safe and ergonomic serviceability.
A strong machine for demanding applications!
Advantages:
• For cutting pipes with ODs between 283 - 508 mm (11.14 - 20 inch) and pipe wall thicknesses of up to 15 mm (0.59 inch)
• Right-angled cutting without misalignment
• Burr-free and cold operating process
• Unique automatic process by the AVM feed module thus ensuring constant cutting
• Including a height-adjustable and robust lifting bench with a container for swarf collection
• The ergonomically designed handle enables a safer operating position; and cutting elbows is made possible without any further adjustments
• Multifunctional wrench for all setups on the machine
• Sturdy design with powerful drive
• High rotational moment for optimal cutting and beveling processes
• Optimal speed range of 50 - 163 rpm, ideal for cutting high-performance materials (Hastelloy, P91, etc.)
• Plug connection with quick-action coupling: for easy and comfortable replacement of the power cable.
• Optimized saw blade guard protects the user against flying chips
Your benefits:
• Reduced tooling and production costs
• An even higher operating life of the tools is guaranteed by the continual cooling system (available as special accessory)
• High operating efficiency
|
|
|
Our original product and now an industry standard, the D.L. Ricci Corp. Clamshells are the best pipe cutting and pipe beveling machines on the market today. From the mini to the HD our severing and beveling clamshells have patented bearing technology and are easy to setup and operate.
|
|
|
|
|
|
The new GTB2T is the first of our "Next Generation" of end prep tools. Simple to set-up and operate, this ID mounted end prep machine delivers exacting surface finishes on pipe end-preps, valves, flanges, fittings and more.
Dependable and rugged, our BU Facer series make flange facing easy and inexpensive. These large diameter machines can be used to re-face all size flanges ranging from 10" to 110" OD. These industry proven facing machines are capable of tube sheet and flange facing in minimum setup time. The time tested solid ring design and interchangeable drive system provide a rigid machine capable of holding tight tolerances and creating excellent surface finishes
The 314 Beveler was created for quick set-ups and weld end preparations on pipe and tube diameters form 3" to 14" OD. Reliable and torque-free operation is accomplished with an automatic three jaw locking system that automatically centers the pipe beveling machine to the bore of the piping to be machined. Using the automatic chuck system, installation of the mandrel can be accomplished in less than one minute. The 314 pipe beveling machines also have an optional miter mandrel system for mounting in valves, fittings and short perch applications. The cutting head of the 314 Beveler is made of 4140 steel for rigidity and long life. The 3 cutting tool slots accept all configurations of high-speed form tool blades for versatile operation. The 314 Beveler is capable of form tool beveling, facing and ID counter-boring in one operation.
|
|
PRE-ASSEMBLING: 6 > 42x4 mm
37° FLARING: 6 > 42x4 mm
CUTTING: MAX Ø 100 mm
BENDING: 6 > 42x4 mm
DEBURRING: MAX Ø 42x4 mm
MATERIALS: AISI 316 TI - ST 37.4
DIMENSIONS L x D x H: 830 x 1260 x 1210 mm
WEIGHT: 262 KG
STANDARD VOLTAGE: 230V 50Hz 1PH
MOTOR POWER: 4.6 KW MAX
CONTROL BOARD: included
OIL: included
COMPRESSED AIR: 220 L/MIN.
TOOLS HOLDER: OPTIONAL
37° FLARING BLOCK: OPTIONAL
|
|
The MC or mini-clamshell was designed for on-site severing and beveling on small piping and valve systems.
These mini pipe cutting and beveling machines have a lightweight structure which incorporates our patented low friction bearing design. This adds strength, accuracy and leads to minimal wear. The MC quickly splits and easily mounts on in-line piping systems and the super compact design sets-up painlessly in tight places.
|
|
BENDING: 6 > 42x4 mm
MATERIALS: AISI 316 TI - ST 37.4
DIMENSIONS L x D x H: 680 x 880 x 910 mm
WEIGHT: 100 KG
STANDARD VOLTAGE: 400V 50Hz 3PH
MOTOR POWER: 1.1 KW
CONTROL BOARD: included
ELECTRICAL LIMIT SWITCH: included
OIL: included
|
|
Universal Pipe Cutter
SCORP 170(e)
SCORP 220 Plus
SCORP 360
The ultimate and fast solution for cutting of cast iron, stainless steel, steel, copper, aluminum and plastic pipes.
Ideal for pipe fitters to use on construction sites and in industrial pipe installations.
Your advantage:
• Powerful and lightweight machine
• Secure opertion by means of overload protection and saw blade guard
• Burr-free and square cut
• Corrosion and heat resistant
• The SCORP 170e now incorporates a speed regulator
Your benefits:
• Wide range of applications and dimensions
• No rework necessary
• Suitable for clamping joints
• Reduction of tool costs
• Lightweight, single person operation
|
|
STRONG POINTS
Low cost: rationalizing and simplifying the TOP technological solution without skimping on quality, a "concentrate" of Sinico's vast experience
Optimized automatic running: patented AVTC® (constant chip volume removal) system to provide a constant mean volume of chip removal under all operating conditions.
Machining precision: all operations are carried out in one chucking and the rotary transfer features Hirth gears
Quick tooling: the high level of automation means it takes much less time to adapt the machine when the product being made is changed
Short delivery times: an optimized production process and standardized components have enabled us to drastically reduce the time it takes to set up the machine.
|
|
GBC pipe cutting machines orbital bench type are the fast & easy solution for cut off any pipe material (Fe, alloys, stainless steel).
Driven by a powerful electric motor, with variable rpm, easy handle all tube diameters & wall thickness thanks to its special shaped vice locking pads.
GBC orbital pipe cutters can perform clean square cut, burr free, ready for welding.
Available automatic electric rotation on bigger sizes.
- GBC PIPE 2 range 6-60mm (1/4"-2")
- GBC PIPE 4 range 13-120mm (1/2"-4 1/2")
- GBC PIPE 8 range 80-230mm (3"-8")
- GBC PIPE 12 range 210-326mm (8"-12")
|
|
Type FK50 / FK60 mandrel bending machines are used to bend tubes with narrow radii.
These machines have a compact, freestanding bending head and offer the maximum degree of latitude in bending. These machines are very well designed and solidly constructed, guaranteeing high availability and optimum bending quality. Short set-up times and high-performance drives guarantee high profitability for both one-off and mass production items. The machines also have an outstanding price/performance ratio.
|
|
AddisonMckee's innovative FormMaster-70 Ram Extrusion machine, or FM 70 RE, has been designed to produce small bent components at high speeds with minimal scrap.
In essence, the FM 70 RE extrudes or pushes a near-net tube through a contoured set of dies or clamps, generating one or two shallow bends - typically with a maximum degree of bend of approximately 40 to 45 degrees.
The FM 70 RE machine is perhaps best known for its ability to minimize tube scrap. As opposed to a typical bending process via a standard bending machine where a clamp holds one end of a tube, and a collet holds the other end where these ends are ultimately discarded as scrap - the FM 70 RE eliminates this scrap via its innovative Ram Extrusion process.
|
|
|
|
|
|
AddisonMckee manufactures a large range of all-electric and/or Hydraulic CNC tube bending machines from 4mm to 273mm diameter, providing tube bending solutions to the Automotive, Aerospace, Shipbuilding, and niche markets.
All AddisonMckee machines are built using exacting quality standards and enforced by our own Total Quality Assurance program, and feature:
* DataBend CNC Unit
* Foot Pedal Cycle Start
* Clockwise/Anti clockwise bending rotation
* Operator training
* Operator manual and circuit diagrams
* Laser safety scanner
* Safety barrier rail
* Recapture software
* Sequential software
* Safe load procedure (foot)
* CE Mark
Hydraulic:
AddisonMckee hydraulic DataBend CNC tube bending machines continue to provide a durable design and proven technology to traditional markets using the same front-end Siemens Controls as the all-electric machines–and all at a lower cost than the electric counterpart.
Electric:
AddisonMckee electric DataBend CNC tube bending machines are clean and quiet, operating with reduced running and maintenance costs. With sophisticated programming control of machine axis, greater positional control and repeatability is achieved, producing high quality bends. The electric range of DataBend machines are ideal for tight radii, thin walls, exotic materials and close tolerance components.
|
|
|
|
|
|
Thanks to the new PowerBend range of CNC tube benders, manufacturers requiring standard three axis solutions can now benefit from AddisonMckee's world-leading reputation for quality, precision and reliability at an exceptionally competitive price.
A high-performance draw bending range, designed for the accurate and repeatable production of tubular components, PowerBend models provide levels of accuracy, repeatability, quick tool change and ease of operation as required by today's manufacturing industries.
PowerBend series CNC tube benders—Key range/feature information:
* PB42ST - 42mm (1 5/8”), PB75 - 76mm (3”), PB100 -102mm (4”), and PB150 - 150mm (6”) - models
* Maximum 20 bends per program
* X, Y, Z/Y, B, C axis data input
* Automatic release of tube prior to final bend
* Extensive program storage with USB ports backup
* Allen-Bradley Control Unit, Drives and Motors
* Rexroth Hydraulics
* Foot Pedal Cycle Start
* Recapture Software
* Anticipated Mandrel Retraction
* Safety Scanner and Barrier Rail
* Recapture software & online diagnostics
|
|
AddisonMckee have designed a range of highly-specialized, electrically-powered, hydraulically-operated elbow tube benders. Developed to answer the demands of the plumbing industry, the ElbowBend series is capable of delivering six 90-degree or 45-degree copper elbow joints every 7.2 seconds.
Simple start-up and shut down procedures allow for quick tool changes to be achieved in 25 minutes.
The machines’ control system is based on a Siemens controller, and all electrical control gear and axis drives are integral to the machine – mounted in an electrical cabinet secured to the base frame.
All AddisonMckee machines are built using exacting quality standards demanded and enforced by our own Total Quality Assurance program.
|
|
|
The Marken 450 series hose cutting machines are the best. These machines are used around the world to cut hose, wire, and cable automatically, accurately, and quickly. The fully automatic 450A is fast and easy to operate. Simply insert the hose, set your length and quantity, and press start. The 450A uses a guillotine cut system to make absolutely square, clean cuts. Accuracy is held within .1 to .3 percent of total length. Options include kit cutting software to manage your customer's kits and part numbers. Variant's of this machine cut wire, cable, hose, and a variety of other materials. If you cut hose all day, there is no better machine in the world to do the job.
|
|
|
The Marken 500 series hose cutting machines are the most widely used machines in the world for automatically measuring and cutting hose, wire and cable. Using a patented process, these machines are the fastest and most accurate you can get. The fully automatic 550S is fast and easy to operate. Simply insert the hose, set your length and quantity, and press start. The 550S uses a wet-cut system to minimize smoke, and contamination. Accuracy is held within .1 to .5 percent of total length. Options include Ink Jet hose marking, Insertion marks printed on the those, and kit cutting software to manage your customer's kits and part numbers. The Model 550 cuts from 1/4 inch hose up to 1.5 inch 4 wire, and 1.25 inch 6 wire spiral hose. Variant's of this machine cut wire, cable, braided hose, spiral hose, hose guard, and a variety of other materials. If you cut hose all day, there is no better machine in the world to do the job.
|
|
|
The Marken 500 series hose cutting machines are the most widely used machines in the world for automatically measuring and cutting hose, wire and cable. Using a patented process, these machines are the fastest and most accurate you can get. The fully automatic 500S is fast and easy to operate. Simply insert the hose, set your length and quantity, and press start. The 500S uses a wet-cut system to minimize smoke, and contamination. Accuracy is held within .1 to .3 percent of total length. Options include Ink Jet hose marking, Insertion marks printed on the those, a special PTFE weld options which eliminates flared ends of PTFE hose, and kit cutting software to manage your customer's kits and part numbers. Variant's of this machine cut wire, cable, braided hose, spiral hose, hose guard, and a variety of other materials. If you cut hose all day, there is no better machine in the world to do the job.
|
|
CAPACITY ON 4 SPIRALS HOSE 1"
OD HOSE CAPACITY 10-41 mm
PLC CUTTING TOLERANCE ± 1 mm
MAX. CUT LENGTH 9999 mm
BELT SPEED 15 - 30 - 40 M/MIN.
BLADE Ø 520 mm
REVOLUTIONS/MINUTE 2800
MAXIMUM WEIGHT REEL 150 KG
STANDARD VOLTAGE 380V 50Hz 3PH
BLADE MOTOR POWER 5.5 W
TRANSMISSION BELT MOTOR POWER 0.35 KW
Ø CONNECTION SUCTION HOSE 100 mm
PNEUMATIC INPUT MAX 6 BAR
WEIGHT CUTTING MACHINE 350 KG
UNROLLER WEIGHT 180 KG
WEIGHT CONVERYER BELT 110 KG
DIMENSIONS CUTTING MACHINE L x D x H 1150 x 850 x 1345 mm
DIMENSIONS UNROLLER 3913 x 1050 x 1362 mm
DIMENSIONS CONVEYER BELT 2155 x 500 x 1030 mm
|
|
CAPACITY ON 6 SPIRALS HOSE: 2"
CAPACITY ON 4 SPIRALS HOSE: 2" 1/2
CAPACITY ON 2 SPIRALS HOSE: 3"
MAXIMUM CUTTING Ø: 100 mm
REVOLUTIONS/MINUTE: 2900
PNEUMATIC INPUT MAX: 7 BAR
BLADE Ø: 400 mm
SUCTION CONNECTIONS: included
WEIGHT: 240 KG
DIMENSIONS L x D x H: 1025 x 700 x 1150 mm
STANDARD VOLTAGE: 400V 50Hz 3PH
MOTOR POWER: 5.5 KW
STROKE COUNTER: included
SAFETY PROTECTION: included
MEASURING HOSEHOLDER: OPTIONAL
CENTRING DEVICE: OPTIONAL
METER COUNTER: OPTIONAL
|
|
EXTERNAL SKIVING: 2"
INTERNAL SKIVING: 2"
REVOLUTIONS/MINUTE: 200
PNEUMATIC INPUT MAX: 7 BAR
WEIGHT: 126 KG
DIMENSIONS L x D x H: 725 x 807 x 1070 mm
STANDARD VOLTAGE: 400V 50Hz 3PH
MOTOR POWER: 0.75 KW
SAFETY PROTECTION: included
PNEUMATIC VICE: included
ELECTRIC PEDAL: included
TOOLS HOLDER: OPTIONAL
|
|
|
The robust M-16 Hydraulic hose saw is ideal for cutting heavy hose all day long. Designed for not just braid, but also spiral and helix reinforced hoses. The M-16 features a 16 inch blade, 10hp motor, hydraulically powered bending mechanism, and a self contained wet cutting system. These features allow you to cut heavy hose up to 2 inch 6 spiral with ease. The hydraulic bender allows for excellent speed control during the cut, and a quick retraction stroke. The self contained wet cut system controls contamination, and reduces smoke and fumes. Many operators find that the combination of these features eliminates the need for additional cleaning of hoses after cutting. If you cut a large quantity of heavy hose, this is the machine for you.
|
|
.Hose size : up to 1 1/4" 4 SP
.Blade diameter : 300 mm
.Motor : 2,2 kW (3 HP) / 230-400V 3 ph / 3000 rpm
.Weight : 36 kg
|
|
CAPACITY: 2"
PNEUMATIC INPUT: MAX 7 BAR
WEIGHT: 85 KG
DIMENSIONS L x D x H: 900 x 650 x 1100 mm
|
|
.Hose size : 2" 4 SP and 4" industrial
.Swage force : 263 tons
.Opening : Die diameter + 52 mm
.Standard dies supplied : 15 18 21 27 33 39 45 51 57 66 73. Bigger sizes also available up to 122.
.Motor : 4kW / 230-400V 3ph (2,2 kW / 220V 1 ph possible on option)
.Quick change tool : SRC on option
.Alternative : can be supplied with 5.5 kW power pack
|
|
Type FK50 / FK60 mandrel bending machines are used to bend tubes with narrow radii.
These machines have a compact, freestanding bending head and offer the maximum degree of latitude in bending. These machines are very well designed and solidly constructed, guaranteeing high availability and optimum bending quality. Short set-up times and high-performance drives guarantee high profitability for both one-off and mass production items. The machines also have an outstanding price/performance ratio.
|
|
Pipe/Tube Cutting & Preparation
* Wide selection from a single source.
* Durable designs.
* Exclusive features for maximum productivity.
|
|
|
|
