|
|
|
Foot operated hydraulic punching system for sheet steel for round holes up to 142.8mm diameter and square holes up to 142.8mm square
|
|
Swedish-manufactured Eye and/or Facewash
Wall mounted (available as free standing)
Each spray head has an internal flow control and filter to remove impurities. Self draining ball valve, with non-returning spring, operated by a push plate. Delivered with collecting bowl in stainless steel.
The water supply should be designed for a minimal flow of 14 litres per minute at a pressure of 2,4 bar.
|
|
|
Wall mounted trigger eyewash. Ideal for treating unconscious or disabled operatives. Can be fitted with 3.5M flexible hose. Other models available
|
|
| ... products without technical information |
| |
|
For the actuation of high frequency surgery devices, foot-operated control devices are applied. The requirements for these control devices are prescribed in EN 60601-1, as well as in EN 60601-2-2. Foot controls for this application field are characterised by defined requirements for the protection class, as well as mechanical stability. Electrostatic charging must be avoided. The requirements for class AP (anaesthesia approved) might also be relevant. In this case the foot controls are gas-proof encapsulated (zone M). The main actuating elements are a yellow pedal (activation »cutting«) and a blue pedal (activation »coagulating«).
|
|
... see all the products in the category
Contactors
|
Liebert PSI - 60/50Hz: High-Level UPS performance and reliability for servers and network power protection in 1,000-3,000VA.
Liebert GXT 500VA to 10 kVA - 60/50Hz: True on-line UPS for networks, clustered equipment, and other critical applications. Protects against all power threats. Generator compatible. Internal SNMP capable.
|
|
The DIALOG PLUS RACK series comprises the 700-1000-1500-2200-3000VA models and uses doubleconversion technology (VFI).
The load is powered continuously by the inverter with an EMI filtered, stabilised and regulated sinewave supply.
The input and output EMI filters considerably increasethe immunity of the load to mains disturbances andsurges, even on bypass.
The UPS can power the load for long periods (usingbattery extension packs) or provide sufficient runtimeto allow shut-down of the protected computer systemsusing the PowerShield³ software, supplied as standard,for Windows 95, 98, 2000, Me, XP, 2003, Mac OSx, 9.x, Linux, NT 4.0, Novell operating systems.
For outstanding power protection and communicationDIALOG PLUS RACK is the best solution for sensitiveand "mission-critical" applications.
|
|
Available in 6 & 10 kVA single-phase output, suitable for 19-inch racks (3U), the Linear Plus RM provides all the advantages of modern double conversion technology.
The Linear Plus RM offers many of the standard performance features of the Linear Plus but in a 3U version, making it ideal for installation in 19-inch rack space.
It is available in both single-phase input and single-phase output configuration and provides the security of a truly redundant parallel system whilst offering the highest degree of reliability for mission critical loads and applications.
|
|
| ... products without technical information |
| |
|
... see all the products in the category
UPSs
|
-------------------INDUSTRIAL LINE----------------------------------
*** Cantek Wall Through Monoblock Refrigeration Unit ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Hermetic Compressor
<< (-5/ 5 deg. C) from 2,22kW to 5,20kW
*** Cantek Straddle Type Monoblock Refrigeration Unit ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Hermetic Compressor
<< (-5/ 5 deg. C) from 2,22kW to 5,20kW
-------------------MASTER LINE----------------------------------
*** Cantek Wall Through Monoblock Refrigeration Unit ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Semi Hermetic Compressor
<< (-5/+5 deg. C) from 3,70kW to 11,20kW
<< (-18/-25 deg. C) from 3,70kW to 22,30kW
*** Cantek Straddle Type Monoblock Refrigeration Unit ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Semi Hermetic Compressor
<< (-5/+5 deg. C) from 3,70kW to 11,20kW
<< (-18/-25 deg. C) from 3,70kW to 22,30kW
These products are already sold in the following countries: United Kingdom, Ireland, Germany, Norway, Denmark, Greece, Hungary, Romania, Russian Federation, Turkey, Cyprus, Azerbaijan, Kazakhstan
|
|
-------------------INDUSTRIAL LINE----------------------------------
*** Cantek Wall Type Split Refrigeration Unit ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Hermetic Compressor
<< (-5/ 5 deg. C) from 2,22kW to 5,20kW
-------------------MASTER LINE----------------------------------
*** Cantek Wall Type Split Refrigeration Unit ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Semi Hermetic Compressor
<< (-5/+5 deg. C) from 3,70kW to 11,20kW
<< (-18/-25 deg. C) from 3,70kW to 22,30kW
This product is already sold in following countries: United Kingdom, Ireland, Germany, Norway, Denmark, Greece, Hungary, Romania, Russian Federation, Turkey, Cyprus, Azerbaijan, Kazakhstan
|
|
| ... products without technical information |
| |
|
With our DMX and WMX series of non-magnetic stainless steel vacuum shrouds and nickel-plated copper radiation shields and sample holders, you can count on high quality, contaminant-free research accessories. All of our vacuum shrouds are easily rotatable under vacuum simplifying experimental set up. Our extensive experience with sample cooling applications for optical spectroscopy, X-ray diffraction, and ESR inspires confidence in the most discerning scientists in the market for standard or special products. If you have application requirements other than what is shown, please call us. Our standard DMX vacuum shrouds and radiation shields are common to all Displex® DE-202 expanders with 1.44 inch extension.
|
|
|
Both sample holders are made of OHFC copper and nickel plated for minimum emmissivity. The optical sample holder is designed to hold 25.2 mm (0.99 inch) x 1 mm thick windows. The resistivity sample holder has a sapphire window with four .032 diameter copper pins epoxied in place. All other dimensions of the resistivity sample holder are the sampe as those of the optical sample holder.
|
|
* Axial-flow Fans
* Heat Exchanger made with copper piping and aluminium fins.
* All models can be operated with hot water, boiling water or steam.
* Heating Capacity: 11-25 kW
* Air Flow: 1.750-2.400 m³
* Cooling Capacity: 2.3-5.1 kW
|
|
Swing Arm / Command Arm
A significant feature of the new General catalogue is a chapter devoted to swing arms (Page 380). Although OEM’s will be the initial target, it is worth mentioning this chapter to all industrial users, as the product range is not only comprehensive, but is aesthetically pleasing and well made.
In our 2006/2007 catalogue, there is information on three different ranges:
OICP, Operator Interface Panel Control
SA SL, Mild Steel Swing Arm SL
SA SS, Stainless Steel Swing Arm SS
Although we haven’t taken on the complete range, you will find the most popular sizes, and all the accessories you need to be able to compete in this niche market.
Traditionally, the swing arm user knows what he wants, which will be very specific to his machine or application. Fortunately, this product range is very versatile, and should meet the majority of our customers requirements.
|
|
bioniq is the new Suspension Arm System from ETA that offers an unrivalled level of flexibility, styling and performance. Users can select from a range of user-friendly components to configure a quality look system.
To complement the Suspension Arm, 2 styles of operator enclosures are available each offering a flexible design that compliments today's hi-tech environment.
|
|
Trailer horses
Reference: CT-16A
Weight: 140
Dimensions: 1500x1295x650
Material: Steel plate
BL: 100
S.W.L.: 50
Finished: Painted
Counter Parts : Trailers / Trucks
|
|
The Mink Prisma-System - gentle transport and support for shafts and pipes with delicate surfaces
The Mink Prisma-System for carrying, gliding and transporting is ready for assembly and offers an optimal and integral solution for support of vulnerable goods.
Available in two sizes, for applications with a component diameter of 0 - 60 mm and 0 - 140 mm. Due to the quickness of replacing the brush segments the Mink Prisma-System can easily be changed over for different requirements or components, without using tools.
Advantages:
- Significant cost savings thanks to standardisation
- No damage by chips or splinters
- Perfect quality assurance
- Quick availability
- Easy conveyance of products
|
|
The RCK-606/608 6U Rackmount Chassis was specially designed for Computer Telephony Integration (CTI) and for fault tolerant server applications. The chassis provides two drive bays combination for different applications. RCK-606 supports four 5.25” + two 3.5” drive bays and RCK-608 supports two 5.25” + six 3.5” drive bays, suitable for RAID related applications. The combination of roomy space, separation of system boards and power supply plus three powerful 120mm fans ensures high reliability for any heat sensitive applications. Detachable card cage offer integrators the ease of installation and maintenance.
Features
• Standard 6U 19” Rackmount Chassis.
• Front Panel with Lockable Doors to Protect Drives
• Two drives combinations : (4) 5.25” & (2) 3.5” or (2) 5.25” & (6) 3.5” drive bays for different applications.
• Replaceable rear panel to support either backplane or ATX motherboard.
• Replaceable power supply bracket to support both standard PS/2, dual PS/2 redundant power supplies.
• Detachable card cage for easy installations and maintenance.
|
|
EIA RS-310C 19" Rackmount Standard 4U height
Heavy Duty Steel with Ni plating
(10) 3.5" HDD and (3) 5.25" Drive Bays
Supports mini-redundant or PS/2 power supply
(1) 80mm and (3) 120mm high speed ball-bearing fans
|
|
Features
EIA RS-310C 19" Rackmount Standard
Heavy duty Ni-plated steel, Black or Beige
Supports Full or Half-Size SBC
PICMG Backplane with optional 2 or 4 PCI slots for Expansion
(1) 5.25"/(1) 3.5" FDD/(1) 3.5" HDD
Lockable Front Door and Replaceable Air Filter
(2) 80cm Replaceable High-speed Ball Bearing Fans for Better Ventilation
300W/400W ATX Auto-switch Power Supply
Specifications
Construction Heavy-Duty Steel with Ni Plating
Color Black or Beige
Board Support Full or Half Size PIII/PIV Single Board Computer
Drive Bays (1) 5.25" (1) 3.5" FDD (1) 3.5" HDD
Expansion PICMG butterfly backplane with optional 2 or 4 PCI slots
Power Supply 300W/400W PS/2 ATX power supply (PFC optional)
Cooling (2) 80cm Ball Bearing Fans and replaceable air filter
Keyboard/Mouse Ports (1) PS/2 Keyboard/Mouse Port on Front Panel
Switch On/Off Switch; Touch-Free Reset Switch
Dimensions 430 mm(W) x 450mm(D) x 88 mm(H) / 16.69 x 17.7 x 3.5
Gross Weight 12.5 kgs /27.5 lbs
|
|
|
RCK-103MA is a rackmountable 1U chassis that supports practically all kinds of ATX motherboards and dual CPU server boards. The core of its cooling system is a 9 cm high-speed ball bearing blower and the design that allow efficient airflow to ensure excellent heat dissipation critical for heat sensitive applications. Retaining bar reduces board vibration significantly and enhances system stability and durability. RCK-103MA also supports hot-swap of HDD. With one 5.25" CD/DVD-ROM drive bay and two 3.5" drive bays with optional SCSI adapter with bracket for Ultra 160 SCSI HDD to support hot-swap function, RCK-103MA is an ideal solution for simple server, FTP, WEB, Mail or Firewall server, client server or data backup server.
|
|
|
