|
|
|
|
|
|
Characteristics of TNC pipe bender:
-Controlled through PLC and touch control screen and possesses manual, semi-automatic and full-automatic mode.
-All programs can be operated through dialogue mode touching control screen.
-All information is displayed by English and Chinese with simple operation.
-Can set in many different angles to bending by turns.
-Possess automatic error detection function and limit protecting function.
-Guiding module has auxiliary pushing function and at the same time it possesses reiteration and entering repeat functions that can make the guiding module length shorten.
-Counter function can accurately count workpieces quantity.
-Adoption of oil pressure valve accumulative body loop can control actions individually to prolong the lifespan of oil pressure parts.
-Tri-step loop possesses cooling and deposit functions which can avoid the deteriorate oil.
-Optional function of core entering and lubricating automatically.
-Optional function of core reversing slowly.
-Optional function of slow bending.
|
|
Characteristics of CNC pipe bender:
-Multi-servo axis numerical controlled.
-Input data of Y. B. C or according to Descartes X. Y. Z. coordinate can build bending parameter. According to the input data or built parameter the profile of tube will show on the computer.
-Automatic bending rebound numerical compensation according to accurate measured data. Modify the bending rebound compensation data or compensate manually If the bend is different with what you expect.
-Storage capability: 100 bends for each workpiece. 1000 workpieces'data could be memorized.
-Adopt WINDOWS XP Embed operation system.
-Program transmit: (1) Flash Disc (2) Internet (3) Floppy Disc.
-The heavy-duty series CNC pipe bender(Max.Φ325x25) is the most suitable equipment to bend tube for shipyard.
|
|
|
|
|
|
NC series
NC Control Pipe Bender with Hydraulic Rotary Bending
Cost Effective and easy to bending pipe
The NC Series Tube Benders
The NC series tube benders equipped with NC control unit with Touch Screen Interface. It combines easy-to-use operation with high pipe bending accuracy and cost effectiveness. It is the practical semi-automatic tube bending solution for small to medium productions.
SB-80NC
NC controlled tube bender, with Touch Screen and capacity up to Ø88.9mm. Hydraulic Draw bending pipe bending machine
NC tube and profile bending machine features:
· NC control unit with Touch Screen
· Easy operation interface and enable easy data input
· Large program capacity storage
· High pipe bending accuracy up to +/- 0.15°
· Self diagnosis & error messages on-screen display
· Hydraulic clamping with optional pressure die assist
· Suitable for various materials such as steel, stainless, aluminum and copper
Keywords
Pipe Benders,Tube Benders,Tube Bending,tubing bender,bending pipe,Pipe Bending,Bending pipe Machine,Tube Bending Machine,Pipe Bending Machine,tube cutting,metal saw,Circular Saw,Sawing Machine,tube cutter,pipe cutting,pipe cutter,circular sawing machines,Saw blades,chamfering machine,deburring machine
(Pipe Benders - Tube Benders - Tube Bending - Pipe Bending - Bending Machine - Tube Bending Machine - Pipe Bending Machine - Circular Saw - Sawing Machine - Cutting Machine - Deburring - Tube End Finishing, Bender Tube, bender Pipe, Cutting, Chamfering Machines, Deburring Machines, CNC Tube and Bar Machining Center, HSS saw Blade )
|
|
Fully electric CNC tube bending machine for tubes with OD 80 mm, 9 axis with 3D visual graphic programming (VGP3D),
FEATURES:
* multiradii (up to 8 tools)
* bend head with left or right hand bending sense configuration
* all the critical machine setting parameters set and managed by the CNC control
* Fixed, variable radius and boost bend up to 5000kg
* High reliability and high productivity
* Use of existing tools - low running costs
* Real time bend simulation automatically selecting the shortest and most efficient bending cycle to minimize cycle time and reduce cost,
* Any possible collision points are highlighted and the most practical avoidance routes effected.
* Axis position is read by absolute encoder eliminating all conventional sensors, increasing reliability, performance and reducing maintenance cost
|
|
|
|
|
|
All models of Comac double pinch style profile bending machine can be equipped with electronic automatic control systems to improve accuracy and consistency of jobs and enhance the rate of automation.
These controls are simple 2-axis programmable positioning devices, or CNC controls.
Programmable positioning devices are useful to join straight parts to bent parts and to perform multiple-passes jobs in a more consistent sequence of operations.
CNC controls are required to accomplish multi-radius curves to be produced in medium-large batches with high consistency and excellent quality of transitions between the different radii, even with difficult materials such as thin-wall tubes.
This can be achieved by controlling simultaneously three axes, i.e. the profile feeding and the positions of the bending rolls.
Among the hundreds of parts produced with CNC-controlled rolls, some samples are: greenhouses, handrails of cruise boats, conveyor rails, variable-pitch pipe coils for boilers, pancake coils, commercial signs, etc.
Two versions of CNC control are available; both are based on industry standard non-proprietary hardware (PLC’s and Industrial PC’s worldwide available), in order to insure immediate availability of spare parts and local technical support.
|
|
AddisonMckee's innovative FormMaster-70 Ram Extrusion machine, or FM 70 RE, has been designed to produce small bent components at high speeds with minimal scrap.
In essence, the FM 70 RE extrudes or pushes a near-net tube through a contoured set of dies or clamps, generating one or two shallow bends - typically with a maximum degree of bend of approximately 40 to 45 degrees.
The FM 70 RE machine is perhaps best known for its ability to minimize tube scrap. As opposed to a typical bending process via a standard bending machine where a clamp holds one end of a tube, and a collet holds the other end where these ends are ultimately discarded as scrap - the FM 70 RE eliminates this scrap via its innovative Ram Extrusion process.
|
|
|
|
|
|
Thanks to the new PowerBend range of CNC tube benders, manufacturers requiring standard three axis solutions can now benefit from AddisonMckee's world-leading reputation for quality, precision and reliability at an exceptionally competitive price.
A high-performance draw bending range, designed for the accurate and repeatable production of tubular components, PowerBend models provide levels of accuracy, repeatability, quick tool change and ease of operation as required by today's manufacturing industries.
PowerBend series CNC tube benders—Key range/feature information:
* PB42ST - 42mm (1 5/8”), PB75 - 76mm (3”), PB100 -102mm (4”), and PB150 - 150mm (6”) - models
* Maximum 20 bends per program
* X, Y, Z/Y, B, C axis data input
* Automatic release of tube prior to final bend
* Extensive program storage with USB ports backup
* Allen-Bradley Control Unit, Drives and Motors
* Rexroth Hydraulics
* Foot Pedal Cycle Start
* Recapture Software
* Anticipated Mandrel Retraction
* Safety Scanner and Barrier Rail
* Recapture software & online diagnostics
|
|
AddisonMckee have designed a range of highly-specialized, electrically-powered, hydraulically-operated elbow tube benders. Developed to answer the demands of the plumbing industry, the ElbowBend series is capable of delivering six 90-degree or 45-degree copper elbow joints every 7.2 seconds.
Simple start-up and shut down procedures allow for quick tool changes to be achieved in 25 minutes.
The machines’ control system is based on a Siemens controller, and all electrical control gear and axis drives are integral to the machine – mounted in an electrical cabinet secured to the base frame.
All AddisonMckee machines are built using exacting quality standards demanded and enforced by our own Total Quality Assurance program.
|
|
|
|
|
|
AddisonMckee manufactures a large range of all-electric and/or Hydraulic CNC tube bending machines from 4mm to 273mm diameter, providing tube bending solutions to the Automotive, Aerospace, Shipbuilding, and niche markets.
All AddisonMckee machines are built using exacting quality standards and enforced by our own Total Quality Assurance program, and feature:
* DataBend CNC Unit
* Foot Pedal Cycle Start
* Clockwise/Anti clockwise bending rotation
* Operator training
* Operator manual and circuit diagrams
* Laser safety scanner
* Safety barrier rail
* Recapture software
* Sequential software
* Safe load procedure (foot)
* CE Mark
Hydraulic:
AddisonMckee hydraulic DataBend CNC tube bending machines continue to provide a durable design and proven technology to traditional markets using the same front-end Siemens Controls as the all-electric machines–and all at a lower cost than the electric counterpart.
Electric:
AddisonMckee electric DataBend CNC tube bending machines are clean and quiet, operating with reduced running and maintenance costs. With sophisticated programming control of machine axis, greater positional control and repeatability is achieved, producing high quality bends. The electric range of DataBend machines are ideal for tight radii, thin walls, exotic materials and close tolerance components.
|
|
| ... products without technical information |
| |
Digital alternative for a VA meter with totaliser and alarm functions.
MASS-VIEW(r) has an OLED display showing:
- actual flow rate (bar graph and actual value or percentage)
- desired flow units
- type of gas (7 pre-installed gases)
- totalized flow
- min. and/or max. alarm
Other features are:
- Freedom from parallax error
- Virtually independent of pressure and temperature variations
- Low pressure drop
- Wide flow ranges
- Fast response
- High accuracy
- Alarm and counter functions (2 alarm contacts available on meters)
- Analog (0..5 Vdc) and digital communication (Modbus-RTU, RS-232 interface)
- Configurable password protection
- 7 pre-installed gases available (Air, N2, O2, CO2, Ar, CH4, C3H8) or He or H2
- 4 selectable ranges (100%, 50%, 25% and 10% of maximum fullscale range)
- Digitally calibrated
- 3 year warranty
You can order these instruments online and your order is shipped within two working days.
|
|
Digital alternative for a VA meter with totaliser and alarm functions.
MASS-VIEW(r) has an OLED display showing:
- actual flow rate (bar graph and actual value or percentage)
- desired flow units
- type of gas (7 pre-installed gases)
- totalized flow
- min. and/or max. alarm
Other features are:
- Freedom from parallax error
- Virtually independent of pressure and temperature variations
- Low pressure drop
- Wide flow ranges
- Fast response
- High accuracy
- Alarm and counter functions (2 alarm contacts available on meters)
- Analog (0..5 Vdc) and digital communication (Modbus-RTU, RS-232 interface)
- Configurable password protection
- 7 pre-installed gases available (Air, N2, O2, CO2, Ar, CH4, C3H8) or He or H2
- 4 selectable ranges (100%, 50%, 25% and 10% of maximum fullscale range)
- Digitally calibrated
- 3 year warranty
You can order these instruments online and your order is shipped within two working days.
|
|
|
|
|
|
Our 100 Series family of mass flow controllers are one of our finest technical achievements in over 35 years in the mass flow instrumentation business. Our 100 Series is designed so the physics are correct! Our 100 Series Premium Digital family is made up of our flagship Smart-Trak® Model 100 , our highly engineered ultra-low flow solution Micro-Trak™ Model 101 and our NEMA 6 & IP67 industrial MFC, the Max-Trak™ Model 180 . Excellent accuracy and repeatability coupled with unsurpassed instrument stability result from a patented, inherently linear design, advanced platinum sensor technology, and a valve that is strong, flexible and forgiving. Our 100 Series family of instruments has raised the bar and set a higher standard in the Performance MFC marketplace.
UQNIQUE PRODUCT FEATURES
- Accuracy of +/- 1% of full scale
- Accuracy of +/- 0.7% of reading +.3% of FS
- 316 stainless steel construction
- Flow ranges from 0 to 10 sccm to 0 to 1000 slpm.
- Fast-response control valve
- True digital performance with great flexibility
- “Primary Standard” calibration& NIST traceability
- Dial-A-Gas® Technology: 10 pre-programmed gases come standard
- Small footprint makes drop-in replacement easy
- Single-sided 24 VDC power supply
- CE approval
- MAX TRAK is Industry’s only NEMA 6/IP67 industrial MFC provides wash down protection eliminating secondary enclosures
-- MICRO-TRAK Suitable for most gases with flow rates down to 0.1 sccm (smlm)
|
|
Mass flow techniques provide more RELIABLE, REPEATABLE AND ACCURATE gas flow rate measurements compared to volumetric methods such as rotometers and turbine meters. Mass flow measurements use the density of the gas to translate mass flow units (kg or lbs) to units of familiar volumetric terms (liters/min). However the measurements are still mass units (we call those units STANDARD liter/min (slm)) and they do not change with temperature and pressure changes. We do this by referencing just one, specific temperature and one specific pressure (STP).
300 Series mass flow instruments have flow ranges from 0-5 sccm to 0-3,000 slm; use all metal seals, provide analog outputs, and are constructed of stainless steel. The mass flow controllers have normally closed valves. Corrosive gases, with the exception of the halogens, pressures up to 1000 psig (optional) are easily measured.
|
|
|
|
|
|
AALBORG®'s unique microprocessor-driven "Smart" DIGITAL MASS FLOW CONTROLLERS allow one to program, record, analyze and control flow rates of various gases with a computer via an RS 485 interface.
Programmable for various control functions such as SET POINT, TOTALIZER, STOP TOTALIZER, READ TOTALIZER, totalize from PRESET FLOW, stop at PRESET TOTAL, AUTO ZERO, PROGRAMMABLE FLOW and more. Auto zero feature utilizes an automatic balancing circuit that virtually eliminates drift of zero and span. Two dry contact closures turn external process equipment ON and OFF. Gas flow rates are unaffected by temperature and pressure variations within stated limitations.
Extensive on-board memory enables each controller to store NIST traceable calibrations for up to ten gases. Controllers also have conversion factors for 256 different gases in hardware memory making this a most versatile flow controller.
SPECIFICATIONS:
Accuracy: +/- 1% of full scale.
Repeatability: +/- .15% full scale.
Maximum Flow: 100 sL/min [N2}
Maximum Gas Pressure: 500 psig / 34.5bars.
Leak Integrity: 1 x 10- 9 sccs He maximum.
Output Signal: 4 to 20 mA 0 to 5 VDC; 0 to 10 VDC
|
|
|
|
|
|
The thermal mass flow meters and controllers of the smart series are especially well suited for measurement and control applications in industry and process as well as for customer-specific OEM applications. The products are provided with a multitude of features which can be easily optimized to meet a customer’s individual requirements.
- Digital and analog interface as standard
- Fieldbus-Connections: Modbus, Profibus, etc.
- Insensitive to pressure and temperature changes
- CMOS sensor technology
- Short response time for meters and controllers
- High accuracy and turndown ratio
- Minimum pressure loss
- Temperature measurement as standard (digital)
- Compact design, simple installation
- Easy to service and maintain
- Materials: Aluminium or stainless steel
- Easy to add functions
- 3-year warranty
Process Control Units PCU100 & PCU800 for the thermal Mass Flow Meters & Mass Flow Controllers 'red-y smart series' are ideally suited to power and control up to eight red-y mass flow meters and controllers.
|
|
High- performance and high-speed digital mass flow controller equipped with Yamatake “µFlow” (Microflow) sensor, to actuate a proportioning valve with high level control technology.
MQV SERIES
The MQV realizes high speed, low differential pressure and wide range flow control.
MPC SERIES
The MPC is a compact gas mass flow controller with built-in miniature proportioning valve that can either be panel-mounted or can be mounted directly on the piping.
MPC is ideally suited for welding installations and medical appliances.
|
|
Gas Flow Controllers with integrated regulator
The thermal mass flow meters and controllers of the smart series are especially well suited for measurement and control applications in industry and process as well as for customer-specific OEM applications. The products are provided with a multitude of features which can be easily optimized to meet a customer’s individual requirements.
Instrument versions
standard: The economic solution
(Accuracy +/- 1,5% of full scale, Turndown ratio 1 : 30)
hi-performance: With highest accuracy and turndown ratio
(Accuracy +/- 0,3% of full scale and +/- 0,5% of reading, Turndown ratio 1 : 100)
|
|
|
Sensirion’s SFC3000 is a small, fully digital mass flow controller for high-volume OEM applications. It offers fast and accurate control of gas flows over a very wide range. The digitally calibrated and temperature compensated sensor signal is converted directly into a signal which is used in the digital controlling circuit to control the valve. This results in very high accuracy, fast settling time and a large dynamic range. The mass flow controler’s excellent stability and repeatability make it ideal for analytical instruments. Different gas types and control ranges can be calibrated and switched by software.
|
|
| ... products without technical information |
| |
|
|
|
|
Performance at small prices
***The New Series of Indicators and PID Controllers of B B Thermo-Technik***
B B Thermo-Technik presents a new series of low cost indicators and digital temperature or universal controllers.
Available from 77,- € on, the PID 1/16 DIN temperature controller was designed also for non-experienced users: combining extreme simplicity in operation with high performance only found in expensive high end controllers. It accepts most thermocouples and Pt100 RTD, features a relay and pulse output for driving solid state relays.
The Universal Controller series accepts thermocouples J, K, T, E, N, R, S, resistance thermometer Pt100, V, mV, mA. They hold in one single instrument all the major features that are needed for the vast majority of industrial processes. Both input and output are selected through the front keyboard without hardware change.
The low cost temperature indicators available from 69,- € are easy-to-use also ideal for non-experienced users. Much performance at an acceptable price! Universal indicators at reasonable prices are also available!
Further information will be found at our Temperature Shop:
www.temperature-shop.eu
|
|
The Temperature Relay TR-42 has been designed for continuous monitoring of the temperature, the cooling fan's control and overheat protection for resin or air insulated three-phase transformers.
Thermal detectors PT100 DIN 43760, three of them located inside the transformer coils and the fourth at the core, detect the temperature.
The TR-42 relay is microprocessor-based equipment designed to satisfy all control requirements and guarantee high reliability.
The TR-42 perform the following functions:
Measurement:
* Coils and core transformer temperatures, automatically each 5 sec or manually.
* Highest temperature indication and storage.
Signaling and programming:
* 7 segment display and led indication.
* Simplified programming through frontal push buttons.
* Display and non volatile storage of: alarm temperature, trip temperature, fan on, start and stop fan temperature, highest RTD temperature, baud rate of serial transmission, and assigned relay address.
|
|
|
Fuzzy logic is an essential feature of this versatile controller. Although PID control is widely accepted by industry, it is difficult for it to work efficiently in some systems - for example: systems of second order, long lag-time systems, and systems with various set points and loads, etc. This fuzzy logic temperature controller will enhance PID control. Fuzzy logic will adjust PID values indirectly to make the manipulation output value (MV) adjust flexibly and quickly adapt to various processes. This enables a process to reach its predetermined set point in the shortest time with minimum overshoot during tuning or external disturbance.
|
|
KT4 - small standard type
- 1/16 DIN size temperature controller
- Size: 48 x 48 x 95mm (WxHxD)
- Panel-mounted type
- IP66
- 2nd optional alarm output
- Heating and cooling control with 2nd optional control output (non-contact voltage output)
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
