|
|
|
|
|
|
To complement the Pipestoppers™ range of nylon expanding plugs, we offer all sizes of aluminium plugs.
These are provided in sizes from 1.5" upwards and are suitable for more arduous duties such as immersion in chemicals and/or higher temperatures. They are manufactured with 1/2", 1" and 2" outlets.
1/2" Outlet for plugs sizes up to 6"
1" Outlet for plugs sizes 6" to 18"
2" Outlet for plug sizes of 20" and greater
The standard seals are made from natural rubber and special rubber seals are available for chemical applications where greater resistance is required.
(alternative rubber rings options are: Silicone, Nitrile & Viton)
All plugs conform to British Standards BS8005 for low pressure testing and sealing of pipes.
The basic principle - effective sealing is simple, insert the plug into a pipe opening and tighten the wing nut clockwise. The rubber ring will expand and provide a positive seal. To remove simply reverse the process.
Tightening the wing nut is easy with the Pipestoppers™ patented friction free washer.
Typical applications:
Are used for plumbing operations in a wide variety of industries, including domestic and industrial water and drainage systems.
Also for ducting and conduit, swimming pools, masking in painting and casting industries, as weld purge plugs for stainless steel pipework fabrication and many others.
|
|
These versatile hand tools and dies are ideally suited for R & D, networking
applications and on-site maintenance work.
• User-adjustable ratchet control for a complete crimping cycle
• Emergency ratchet release
• Angled head, providing a comfortable hand and wrist position
• Over 100 interchangeable SDE die sets for crimp a broad range of connectors
• Able to handle multiple wire and terminal sizes in one die set
|
|
For pressure testing and stopping all pipework from 50mm (2") upwards.
To complete the Pipestoppers™ range of nylon expanding plugs, aluminium plugs, steel drain plugs and inflatable stoppers, we offer double aluminium plugs for increased stability and higher pressure duties.
The test pressure capability of the single stoppers is limited and the double versions increase that capability, while offering a greater stability in the pipe.
As single plugs approach their pressure limits, they can tend to tip over like a butterfly valve. The double plugs will prevent the tipping and guarantee the seal.
They are manufactured with 0.5", 1" and 2" outlets.
The standard seals are made from natural rubber and special rubber seals are available for chemical applications, where greater resistance is required.
All plugs conform to British Standards BS 8005 for low pressure testing and sealing of pipes.
|
|
For pressure testing and stopping all pipework from 50mm (2") upwards.
To complete the Pipestoppers™ range of nylon expanding plugs, aluminium plugs, steel drain plugs and inflatable stoppers, we offer double steel plugs for increased stability and higher pressure duties.
The test pressure capability of the single stoppers is limited and the double versions increase that capability, while offering a greater stability in the pipe.
As single plugs approach their pressure limits, they can tend to tip over like a butterfly valve. The double plugs will prevent the tipping and guarantee the seal.
They are manufactured with 0.5", 1" and 2" outlets.
The standard seals are made from natural rubber and special rubber seals are available for chemical applications, where greater resistance is required.
All plugs conform to British Standards BS 8005 for low pressure testing and sealing of pipes.
|
|
|
|
|
|
NYLON PLUGS from 0.5" (12mm) through to 6" (150mm)
Pipestoppers™ Nylon plugs are used internationally as the standard 'Drain Plugs' for testing leak tightness of foul water lines at the time of installation.
Furthermore, the range of sizes make these plugs ideal for a number of other applications in the water and gas industries as well as applications in all other industries where pipes are used or where there are holes to be blocked.
Testing and sealing of all pipes, pipe joints and pipe work assemblies can be done with the Pipestoppers plugs. They can be supplied with a hollow shaft version for screwing on standard hose connections or for using our own fixed nipple caps or the free nipple and cap assemblies that we manufacture.
Or for the smaller sizes, they can be supplied with solid shafts for greater pressure testing capabilities.
Other applications include: Sealing holes in castings, tanks, other assemblies for spraying and blasting to protect the insides. Maintenance and installation of swimming pool and water spa pipework.
Nylon 6 is an engineered polymer which is resistant to salt water corrosion it is also resistant to many other chemicals. Along with natural rubber rings they provide a high quality leak tight seal in the selected orifice.
There are two types:
- A solid shaft version with five sizes from 0.5" (12mm) up to 1.5" (38mm) and
- A hollow shaft version with eleven sizes from 0.5" to 6" inclusive.
All plugs have:
A central spindle/shaft on which two plates are fitted with a natural rubber tyre (ring) between them, a wing nut on the shaft moving the two plates together compressing the tire and making the seal in the pipe or orifice. Natural rubber tyres which can be substituted for different rubbers where additional chemical and/or heat resistance is required. Alternative rubber rings options are: Silicone, Nitrile & Viton)
The hollow shaft version with sizes from 0.5 inch to 6 inches allows:
Water or gas to be injected or drained as required.
Sizes of 1.5 inch and above are threaded with a half inch BSP for the connection of standard nuts/hose fittings is provided with a solid end cap seal are fully demountable for cleaning and parts replacement.
Optional end caps are available with fixed nipples/nozzles for hose connection or free nipples which can rotate when heavier hoses are used.
|
|
For pressure testing and stopping all pipework from 50mm (2") upwards.
To complete the Pipestoppers™ range of nylon and aluminium expanding plugs, we offer all sizes of steel expanding plugs.
These are provided in sizes from 2", for more arduous duties such as long immersion in water and higher temperature.
The plugs are merely inserted into the pipe and the wings tightened to force the top and bottom plates together, thereby expanding the rubber ring to seal tightly in the pipe.
They are manufactured with 0.5", 1" and 2" outlets.
The standard seals are made from natural rubber and special rubber seals are available for chemical applications, where greater resistance is required.
All plugs conform to British Standards BS 8005 for low pressure testing and sealing of pipes.
|
|
Automotive Plug Test Kit
To make the sealing of all holes easy and fast for reliable leak testing for a variety of heat exchangers, particularly radiators and inter-coolers for cars and trucks, the Pipestoppers™ division of Huntingdon Fusion Techniques Limited manufactures ready made kits of plugs.
The plugs are made from nylon and natural rubber, so they will not corrode and seize up. They can also be totally dismantled for cleaning and part replacement.
Each kit comprises two of each solid shaft plugs, from 0.5" to 1.5" and hollow shaft from 0.5" to 2". Also included are 4 x 0.5" BSP nipple caps and 4 x 0.5" BSP swivel nuts and hose tails. Plus the rigid ABS plastic storage case, with special cut to size foam.
For larger diameters, see the details of the Commercial Vehicle leak test kit. All plugs are available as individual items for replacement purposes.
Sizes from 1.5" and above have an 0.5" BSP threaded hollow shaft connecting air lines to pressurise the items under test.
|
|
Drain Test Plug Kit
The drain test kit contains the most popular sizes of drain plugs and accessories. These are all sorted in a robust ABS plastic case.
The kit includes:
Hollow shaft plugs, 2 of each - 2.5", 3", 4", 5" & 6"
4 x 0.5" BSP nipple caps
4 x 0.5" BSP swivel nut and hose tail
|
|
|
|
|
|
Following the successful introduction of the Pipestoppers™ Plumbing Kits in other industries, the Company has developed a plumbing kit for the leak testing and stopping of pipe work and nozzles used in the Pool and Spa industry.
The kit comprises the small sizes used for isolating spa nozzles and the larger sizes for the recirculation pipe work for filtration, flushing and heating.
Sizes range from 0.5” to 4.0” to cover the common sizes of nozzle and pipe work in use however the kits can be modified and adjusted to contain the 4.5”, 5”, 5.5” and 6” sizes as well if needed.
HFT Pipestoppers™ division manufactures nylon plugs for hole, tube and pipe sizes from ½ to 6” .
Nylon 6 as used for the plugs and the natural rubber rings are resistant to Salt Water, Chlorinated water and Ultra Violet radiation so they are suitable for use in a wide range of environments.
They are lighter, lower in cost and much less likely to jam then the brass plug predecessor that was commonly used before.
For applications where stoppers need to be inserted into a small diameter hole in order to seal a large space behind, the Company also manufactures inflatable stoppers for diameters from 2 to 72”.
|
|
Pipestoppers™ Commercial Plug Test Kit
For leak testing the commercial vehicle components with the large ports, a separate Pipestoppers™ kit is available with large size plugs.
The commercial kit comprises the following items:
Hollow shaft plugs - 2 of each; 2.5", 3", 4", 5" and 6"
also included are 4 x 0.5" BSP nipple caps and 4 x 0.5" BSP swivel nuts and hose tail. Plus the rigid ABS plastic storage case with special cut to size foam.
These plugs all have hollow shafts with 0.5" BSP threads for the connection of an air hose.
|
|
Domestic Plumbers Plug Kit
The plumbers test kit contains the most popular sizes of test plugs and accessories. These are all stored in a robust ABS plastic case.
This kit includes:
Solid Shaft Plugs - 2 of each: 0.5", 0.75", 1", 1.25" & 1.5"
Hollow Stem Plugs - 2 of each: 0.5", 0.75", 1", & 1.25"
Hollow Shaft Plugs - 2 of each 1.5" & 2"
4 x 0.5" BSP Nipple Caps
4 x 0.5" BSP Swivel Nut & Hose Tail
|
|
RIA Connect offers high quality, competitively priced RJ45 jacks and Ethernet connectors. Our product line includes shielded and unshielded RJ45 jacks, thru hole jacks with top or side entry and surface mount RJ45 jacks. We can meet the needs of your data transfer and communications equipment with Cat 5, Cat 5e and Cat 6 compliant jacks, in addition to single port or multi port jacks, LED jacks, USB jacks, Keystone jacks, Industrial Ethernet IP 67 connectors and magnetic jacks.
New this year is X|Synergy. X|Synergy is a product line which facilitates an IP-67 level connection system between the network cable and the PC board. X|Synergy is a robust, tool-less, self-aligning interface which reins supreme in harsh environments. X|Synergy achieves all this while meeting CAT 6A compliance standards, and easily supporting 10Gb/s transmission.
|
|
Very Low Profile PCB Jack(Side Entry)
Materials
Housing: PBT+30% glass-fiber UL94V-0 Black
Contacts: 0.35mm thickness alloy, gold plating over nickel in contact area
Tin Plating over nickel in solder area
|
|
- IP65 / IP67 degree of protection (EN 60529)
- insert RJ45, Cat. 5 Ethernet
- rated current: 2.1A at 70 °C
- rated voltage: 50V cc / 35V ca
- insulation piercing terminal: for data conductors 0.22 mm2 ÷ 0.24 mm2 (AWG for power conductors 0.34 mm2 ÷ 0.38 mm2 (AW 24) G 22)
- temperature limit: -20 °C, +120 °C
- nickel-plated brass screening
- crimping tool: CJPZ Y
- screened cable stripping tool: CJST
- insert code pin: CR KC
- self-extinguishing: UL 94V-0
- metal enclosures in die-cast zinc alloy
- insulating enclosures in black self-extinguishing
thermoplastic material
- mobile enclosures with cable gland
- female insert with two connected entries
- more information on catalogue RJ45
|
|
Connetori modular liabilities RJ45.
Single or to module.
Vericali, horizontals and to angle.
Shielded and not shielded.
_ Category 5e
_ Category 6
_ Category 6a
_ Category 7
_ Category 7a
Available accessories.
|
|
These versatile hand tools and dies are ideally suited for R & D, networking
applications and on-site maintenance work.
• User-adjustable ratchet control for a complete crimping cycle
• Emergency ratchet release
• Angled head, providing a comfortable hand and wrist position
• Over 100 interchangeable SDE die sets for crimp a broad range of connectors
• Able to handle multiple wire and terminal sizes in one die set
|
|
Threadless hose fittings that are a patented, innovative alternative to conventional threaded fitting. WEO Plug-In fittings simply “plug in” to hydraulic systems. A click-to-connect feature provides easy engagement of the male and female halves, without the tools required to connect and disconnect threaded fittings. Other benefits include:
- Leak-free connections.
- No follow-up tightening.
- Minimum space needed. A cartridge insert, designed to drop into the port or valve manifold, allows further reduction in space required for hose assemblies.
- Work injuries eliminated.
- Longer hose life: WEO fittings are self-aligning.
- Easy to service.
- Lower overall cost: Elimination of leakage, improved accessibility, and reduced installation time make WEO fittings lower in overall cost than threaded fittings.
|
|
Threadless hydraulic couplings: Quick - Easy - Leak-free - Safe - Compact
Gates Quick-Lok™ quick to connect and disconnect couplings for hydraulic pressure lines up to 280 bar.
Key benefits:
- Reduces the connection time
- Reduces the need for line side tooling
- Eliminates threads and torque requirements
- Provides a leak-free connection
- Ensures correct fitting every time
- Eliminates re-work at the end of the production line
- Reduces/eliminates warranty claims
|
|
A practical range of PLUG CASES for many applications:
- country specific
- conforming to standard
- flame-resistant
- robust and impact-resistant
Simply an extremely functional solution for your electronics.
Live parts and socket versions in flame-resistant material PC/ABS (UL 94 V-0).
|
|
ITW TekFast hole plugs provide a strong, effective seal for gage and drainage holes necessary for assembly-line operations.
Key benefits of our hole plug designs:
- Cost Effective - Replaces typical metal hole plugs with a light-weight, inexpensive part.
- Non - Corrosive
- Ergonomic - Designed to snap into position quickly and easily.
- Superior Sealing - Heat activated adhesives provide high strength and fill any gaps or voids between plug and sheet metal.
- Versatile - Can be designed for any hole configuration.
|
|
Vitaro 195
ZENITH 160
BERLIN 150
apra Line 140
Tamago 185
apraTek 180
19" enclosure system 179
|
|
3 U subrack 245
6 U subrack 245
2 U subrack 245
4 U subrack 245
7 U subrack 245
Individual Configuration 245
3 U subrack 270/271
|
|
|
|
|
|
Characteristics
DC Power Supplies R&S NGSM are versatile supply and measuring units for testing electronic car components by simulating real operating conditions. In addition to a wide field of car electronics, it can be used in mobile radio, car hifi applications and mechanical engineering. Due to its compact design, the units take up only one half 19" width. A 19" adapter is available for mounting the R&S NGSM into test racks.
Application-specific characteristics
Car electronics
R&S NGSM is a precise and, thanks to its versatility, an extremely economical tool for use in the production of electronics. With the aid of an IEC/IEEE bus or RS-232-C interface (optional), the power supply can readily be integrated into in-line production systems. The startup curve in line with DIN40839 can be adapted to other factory standards by reprogramming it. High surge currents typically occur in applications such as central lock-ing or ABS, but with a pulse current of up to 30 A, R&S NGSM32/10 is ideally prepared for these applications.
Mobile radio systems
The high resolution for current measurements allows the maximum operating time of a mobile phone to be accurately predicted; typical voltage drops during the startup of a car - which have to be tolarated by telephones operated at a car net can be simulated.
DC Power Supply R&S NGSM is insensitive to the RF voltage conducted from a device under test or radiated from a nearby antenna.
|
|
|
Power Management IC solutions ranging from standard ICs to high performance plug-in, power brick, digital power and integrated power modules.
|
|
SchuF invented the Lift Plug Valve in 1914. Since then, it has delivered plug valves to the Chemical, Refinery, Delayed Coking, Polymer, Cement, Mining and Power industries.
Lift Plug valves as suitable for a variety of applications such as isolation, or switching where the medium is highly abrasive, or operating conditions are severe - such as very high temperatures.
SchuF produces a special range of lift plug valves for the coking industry - the IsoPlug and SwitchPlug range.
|
|
Jacketed Plug Valves
TUFLIN® Jacketed Plug Valves
Our jacketed plug valves offer all the proven design attributes of standard standard 2-way plug valves and are available in a wide range of different jacket connections.
Typical applications:
TUFLIN® jacketed valves are especially used for media that might crystallize or seize and therefore must be influenced through additional heating or cooling.
|
|
|
|
|
|
Absopulse Electronics offers a line of plug-in (Eurocard) DC/DC converters designed for railway and other harsh-environments. These units utilize field-proven topology to deliver any DC output up to 130Vdc. They can typically be operated from supply voltages of 24Vdc ((14.4–37V), 36Vdc (22–55V), 48Vdc (28V-74V), 72Vdc (42V-110V), 96Vdc or 110Vdc (57V-168V). Other inputs are available on request.
Absopulse’s line of plug-in (Eurocard) railway converters are designed to meet the requirements of EN 50155 for electronic equipment used on railway rolling stock. They also meet EN 55022 Class B EMI and EN 50121-3-2 (EMI and EMC). The plug-in (Eurocard) series is rated for operation over a -25 to +70oC temperature range without derating, with natural convection cooling. Features typically include full electronic protection on the input and output, optocoupler, optional alarm output and optional control input. An optional built-in redundancy diode to allow for parallel connection to achieve higher output power or N+1 redundancy is available on most designs.
These compact plug-in modules are typically used in 19” rack-mount applications. They are heavily ruggedized and conformal coated and designed to meet IEC 61373 Categories 1 A & B shock and vibration standards.
Absopulse Electronics provides an extensive range of power supplies for operation in railway, industrial and other extreme environments in encapsulated or vented, chassis mount packages. If our standard designs do not meet your requirements, our engineering team will provide a cost-effective solution to meet your exact specifications.
|
|
Exact12 molded homerun cable
MVP12 Single components
MVP12 UNIVERSAL
M12 potted
MSDS8 Safety distribution box M12
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
